No Connectivity within all local addresses, for whatever reason.. 10.23.91.0/26 = the network and subnet. #157

pr3dicament · 2024-11-16T16:25:51Z

Brief Description Of Issue

No connectivity on local addresses. Entire network becomes locked out. This happens after the reboot after installing Skynet, usually. It blocks everything on my own network.

Steps To Reproduce Issue

Using a local IP, mine was 10.23.91.30/26 (i do things backwards).. after installing Skynet, I cannot access it at all, at least, once i reboot. Everything gets blocked, I can't SSH, can't reach it at all, and I end up having to factory reset. I tried so many things including whitelisting and it would not matter, it would say it's not blocked, can't delete it.. but my IPs were blocked when I looked at the "stats" .. its almost like it blocked basically all IPv4, even local addresses. Tried adding two networks bridged through ssh... could not get anything to work. Sometimes wireless connections would work for the LAN, but no internet connectivity. And it doesn't always work or keep working. but it automatically banned my wired IPs.. It's not so much reproducing as it is just not being able to use it. Couldn't whitelist, it kept saying it was not there so that it couldn't delete it, but it was showing it on the stats. I looked everywhere I could think and it was almost like I couldn't add anything to any whitelist in any way.

TL; DR: I could not whitelist my own local network. When I did the stats, it showed my WIRED IP's were being blocked. Made no sense to me.

Expected Behaviour

To be able to access the local network, have internet access, and not to have everything blocked. To be able to use it without issue. Skynet works great on a GT-AXE11000. Not on a GT-BE98 Pro. Is it just me?

Output of ( sh /jffs/scripts/firewall debug info )

Router Model; GT-BE98_Pro
Skynet Version; v7.6.3 (27/07/2024) (319a580d2ec003b4e6647fdbf889dc77)
iptables v1.4.15 - (eth0 @ 10.23.91.30)
ipset v7.6, protocol version: 7
IP Address; (x.x.x.x) - (xxxx:xxxx:xxxx:xxxx::/64)
FW Version; 102.2_0 (Nov 3 2024) (4.19.275)
Install Dir; /tmp/mnt/ROUTER-USB3/skynet (96.4G / 112.2G Space Available)
SWAP File; /tmp/mnt/ROUTER-USB3/myswap.swp (10.0G)
Syslog Location; (/jffs/syslog.log) (/jffs/syslog.log-1)
Uptime; 0 days, 3 hours, 15 minutes.
Ram Available; (1151M / 2000M)

--------------- | ------------
| Device Name | | | Local IP | | Status |
--------------- | ------------ MAC ADDRESSES REMOVED

-------------------- | ----------
| Test Description | | | Result |
-------------------- | ----------

----------- | ----------
| Setting | | | Status |
---------- | ----------

18/18 Tests Sucessful

=============================================================================================================

[#] 35194 IPs (+0) -- 2579 Ranges Banned (+0) || 24 Inbound -- 12 Outbound Connections Blocked! [debug] [3s]

Obviously I just removed my MAC addresses there. Otherwise, that's the output of firewall debug

Adamm00 · 2024-12-09T03:32:56Z

Skynet logs every packet it blocks, there is never an exception to this rule. Please provide logs of IP's in question being blocked if you believe Skynet is the cause of your issues and we can go from there.

pr3dicament · 2024-12-09T07:45:12Z

Could you please tell me the command to generate a log for you guys? Also, Skynet works with 192.160.50.0/24 and allows everything local there, but the issue is that I cannot find any logs for 10.23.91.0/26. I looked everywhere, no dice.. Is there a command I can issue within SSH? (Yes) Could you please tell me so I can give you all what you need. This is my fourth time re-writing this comment since i broke my wrist, so apologies for any typos.

You could issue a command that pulls this information. We both know that. I have not been lazy with this, I just simply removed SkyNet and things started workin. It blocked my entire local network and from what i can tell, didnt generate any logs, I couldn't do ANYTHING with its WebUI too, even SSH was limited. local basically was crippled so i had to factory reset the router. I'm trying all of this stuff, left and right, i'm literally having comerse wouldn't work either. Both v4 and v6.

Sorry. too long of a response. tl;dr There aren't any logs that i can find.
LAN IP: 10.23.91.62
Subnet Mask: 255.255.255.192

Adamm00 · 2024-12-10T12:23:32Z

Sorry. too long of a response. tl;dr There aren't any logs that i can find.

Skynet logs everything to the syslog in real time, then cleans up the syslog to its permanent location in “/tmp/mnt/ROUTER-USB3/skynet” every hour. You can also use the various stat commands in the readme to identify any blocks you believe to be incorrect.

pr3dicament · 2024-12-10T12:55:07Z

If I reinstall Skynet then I will let you know.. I created this issue awhile ago now. So that is gone from my device, like i said.. factory reset, and skynet was also removed as a result plus it still blocks my entire LAN. If I try to come back to it then we can revisit this.

pr3dicament changed the title ~~No Connectivity within all local addresses, for whatever reason.. 10.29.30.0/26 was was the network and subnet.~~ No Connectivity within all local addresses, for whatever reason.. 10.29.30.0/26 = the network and subnet. Nov 16, 2024

pr3dicament changed the title ~~No Connectivity within all local addresses, for whatever reason.. 10.29.30.0/26 = the network and subnet.~~ No Connectivity within all local addresses, for whatever reason.. 10.23.91.0/26 = the network and subnet. Nov 16, 2024

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

No Connectivity within all local addresses, for whatever reason.. 10.23.91.0/26 = the network and subnet. #157

No Connectivity within all local addresses, for whatever reason.. 10.23.91.0/26 = the network and subnet. #157

pr3dicament commented Nov 16, 2024 •

edited

Loading

Adamm00 commented Dec 9, 2024

pr3dicament commented Dec 9, 2024

Adamm00 commented Dec 10, 2024

pr3dicament commented Dec 10, 2024

No Connectivity within all local addresses, for whatever reason.. 10.23.91.0/26 = the network and subnet. #157

No Connectivity within all local addresses, for whatever reason.. 10.23.91.0/26 = the network and subnet. #157

Comments

pr3dicament commented Nov 16, 2024 • edited Loading

Brief Description Of Issue

Steps To Reproduce Issue

Expected Behaviour

Output of ( sh /jffs/scripts/firewall debug info )

Adamm00 commented Dec 9, 2024

pr3dicament commented Dec 9, 2024

Adamm00 commented Dec 10, 2024

pr3dicament commented Dec 10, 2024

pr3dicament commented Nov 16, 2024 •

edited

Loading