README.md

How to build an API workshop

👷🏽‍♀️ Code for How to build an API workshop at UPC Campus Nord, a Hackers@UPC event.

Table of contents

1. Introduction
2. Theory
   1. What's an API?
   2. API endpoints
   3. Input
      1. Headers
      2. Query parameters
      3. Request body
   4. Output
      1. JSON
      2. HTTP Response status codes
3. Practice
   1. Set up
   2. Python
   3. Exercises
      1. Exercise 1: Your name
      2. Exercise 2: Calculator
      3. Exercise 3: Downloader
      4. Exercise 4: File Manager
      5. Exercise 5: Disk space
4. Tools

Introduction

This workshop has the goal of introducing the concept of the APIs and learning how to build one. In order to understand the concept of black box of the APIs, we are gonna have an HTML page, hosted here, where you will be able to test your API.

For doing this workshop in a proper way, a bit of theory is needed for understanding how we are gonna build the API, and why we should do it in that way. After, in the practice section, there will be few exercises, given a code structure, where we finally will implement a RESTFul API in Python.

Theory

What's an API?

APIs, also known as Application Programming Interfaces, at their most basic level, allows applications to talk to other applications, but they are so much more than this when you begin to explore the world of APIs further.

You can consider an API as a black box where given some input you have some output, indepently of which programming languange you are using or how you implement the black box. At the end, it's a box anyways.

The API is like an artist performing on stage, and its users are the audience.

RESTFul APIs are the most common in the current state of art of Computer Science. This kind of APIs uses HTTP requests to GET, PUT, POST and DELETE data. They use GET to retrieve a resource; PUT to change the state of or update a resource, which can be an object, file or block; POST to create that resource ; and DELETE to remove it.

API endpoints

You can understand an endpoint of an API as an entry point into that mentioned black box. You receive requests to that endpoint with some parameters, and magically you have to return some cool data in a proper way. That proper way is called JSON, which we'll be explainer later.

In order to understand how to use those endpoints, we have to know how an API is properly designed.

Let’s write few endpoints for an API that has Companies which has some Employees, to understand more. /getAllEmployees is an API which will respond with the list of employees.

Few more APIs around a Company will look like as follows:

• /addNewEmployee
• /updateEmployee
• /deleteEmployee
• /deleteAllEmployees
• /promoteEmployee
• /promoteAllEmployees

And there will be tons of other API endpoints like these for different operations. All of those will contain many redundant actions. Hence, all these API endpoints would be burdensome to maintain, when API count increases.

What is wrong? The URL should only contain resources(nouns) not actions or verbs. The API path/addNewEmployee contains the action addNew along with the resource name Employee.

Then what is the correct way?/companies endpoint is a good example, which contains no action. But the question is how do we tell the server about the actions to be performed on companies resource viz. whether to add, delete or update?

This is where the HTTP methods (GET, POST, DELETE, PUT), also called as verbs, play the role.

The resource should always be plural in the API endpoint and if we want to access one instance of the resource, we can always pass the id in the URL.

• method GET path /companies should get the list of all companies.
• method GET path /companies/34 should get the detail of company 34.
• method DELETE path /companies/34 should delete company 34.

Other RESTFul APIs prefers to design these paths using query parameters instead of having the ID in the path directly. Something like:

• method GET path /companies?id=34 should get the detail of company 34.

Wait, did you say query parameters? What's that? Let's talk a bit about how we can specity the input of the black box.

Input

In order to specify the input of the black box, there are three ways for doing it. However, not all of them can be used in all the scenarios.

Headers

This kind of input can be used in the four HTTP methods. It's usually being used for security parameters or for configuring the request to the API.

Query parameters

This type of parameter is being used in the four types of the methods but not 100% recomended in POST. This input is always specified in the URL path directly. For example:

• GET https://api.example.com/students?university=UPC&faculty=FIB returns all the students from UPC university and the faculty FIB.
• DELETE https://api.example.com/subjects?code=XC deletes the subject with XC as code.

Note: See that & character in the URL path is for concatenating multiple query parameters.

Request body

This kind of input is only allowed in POST and PUT methods. This is usually useful for letting the request know which data should be added or modified. There are a bunch of different request bodies, where you can specify which one as a header using Content-Type parameter. Howerver, the most common one is application/json.

Output

That we know how to specify the input of the black box, let's see some information about the output.

In most cases, when you are specifying the reponse of a RESTFul API, there is always two things to return: the response if self (formatted as JSON) and the HTTP status code.

JSON format

JSON (JavaScript Object Notation) is a lightweight data-interchange format. It is easy for humans to read and write. It is easy for machines to parse and generate.

{
  "widget": {
    "debug": "on",
    "window": {
        "title": "Sample Konfabulator Widget",
        "name": "main_window",
        "width": 500,
        "height": 500
    },
    "image": { 
        "src": "Images/Sun.png",
        "name": "sun1",
        "hOffset": 250,
        "vOffset": 250,
        "alignment": "center"
    }
  }
}

There are more ways to specify the output of an API, but we are gonna use JSON as the one since is the most common in most of the RESTFul APIs.

HTTP Response status codes

Response status codes are part of the HTTP specification. There are quite a number of them to address the most common situations. In the spirit of having our RESTful services embrace the HTTP specification, our Web APIs should return relevant HTTP status codes. For example, when a resource is successfully created (e.g. from a POST request), the API should return HTTP status code 201. A list of valid HTTP status codes is available here which lists detailed descriptions of each.

Suggested usages for the Top 10 HTTP Response Status Codes are as follows:

• 200 OK

  General success status code. This is the most common code. Used to indicate success.

• 201 CREATED

  Successful creation occurred (via either POST or PUT). Set the Location header to contain a link to the newly-created resource (on POST). Response body content may or may not be present.

• 204 NO CONTENT

  Indicates success but nothing is in the response body, often used for DELETE and PUT operations.

• 400 BAD REQUEST

  General error for when fulfilling the request would cause an invalid state. Domain validation errors, missing data, etc. are some examples.

• 401 UNAUTHORIZED

  Error code response for missing or invalid authentication token.

• 403 FORBIDDEN

  Error code for when the user is not authorized to perform the operation or the resource is unavailable for some reason (e.g. time constraints, etc.).

• 404 NOT FOUND

  Used when the requested resource is not found, whether it doesn't exist or if there was a 401 or 403 that, for security reasons, the service wants to mask.

• 405 METHOD NOT ALLOWED

  Used to indicate that the requested URL exists, but the requested HTTP method is not applicable. For example, POST /users/12345 where the API doesn't support creation of resources this way (with a provided ID). The Allow HTTP header must be set when returning a 405 to indicate the HTTP methods that are supported. In the previous case, the header would look like "Allow: GET, PUT, DELETE"

• 409 CONFLICT

  Whenever a resource conflict would be caused by fulfilling the request. Duplicate entries, such as trying to create two customers with the same information, and deleting root objects when cascade-delete is not supported are a couple of examples.

• 500 INTERNAL SERVER ERROR

  Never return this intentionally. The general catch-all error when the server-side throws an exception. Use this only for errors that the consumer cannot address from their end.

TIP: For knowing all the HTTP codes without dying, it's cool to checkout this website called HTTP.cat. Just check it.

Practice

Set up

Now that we already understood (I hope) all the concepts related to create an API, let's make it real.

The idea of this section is to create some endpoints of an API using Python and the Flask library. Flask is a simple, yet very powerful Python web framework, specially very useful for a hackathon environment.

All the code related to this section is under the api path. For installing all the dependencies, take a look at the README where is well detailed.

Python

The folder structure is the following.

.
├── requirements.lock
├── requirements.txt
└── src
    ├── __init__.py
    ├── __main__.py
    └── api.py

• requirements.txt: contains a list of the Python libraries needed for building a Flask API.
• requirements.lock: contains the same list as before but with the versions and other needed libraries specified.
• src: folder containg all the code related to the API.
• init.py: file needed in Python for specifying that the current directory is a Python module.
• main.py: file needed in Python for specifying the main function for this Python module.
• api.py: file where the Flask application is created (and where we are gonna implement the endpoints).

Taking a look to the api.py file, we can see this:

import datetime

from flask import Flask, jsonify
from flask_cors import CORS


# Setup Flask app.
flask_app = Flask(__name__)
flask_app.config['JSON_AS_ASCII'] = False  # Needed for proper UTF-8 support.

# Setup CORS - this is needed for a proper communication with the frontend.
CORS(flask_app)


@flask_app.route('/test', methods=['GET'])
def test():
    """
    This endpoint returns the current server time and a static text.
    :return: Current server time and text JSON formatted.
    """
    response = {
        'time': datetime.datetime.now().strftime('%m/%d/%Y - %H:%M:%S'),
        'text': 'This is a test.'
    }
    return jsonify(response), 200

For all the people that's not familiar with Python, the first lines are the ones that import all the needed libraries (from Python or from third parties) for making the code work.

After that, we create and configure a Flask application. The CORS(flask_app) command is needed for a correct communication between the frontend and the backend (or API).

And then, we can see how can we create an endpoint just setting the path where the endpoint is located and allowed methods for that operation. The showed example is a simple endpoint without parameters that just return, in a proper JSON format, the current server time and a static text.

Exercises

Now it's your turn. Fork this repository and try to implement the following endpoints making your API more complete and beautiful. For testing the result, you can use this frontend I've been preparing (completly isolated from your API) where given a port (which is 8080 by default), an endpoint, a HTTP method and optionally an application/json request body, you could see how a frontend is interpreting your local API as a black box.

Exercise 1: Your name

Create an endpoint that returns your first and last name in different variables.

Exercise 2: Calculator

Create an endpoint that given two numbers and an operator (which could be +, - and *) computes the operation.

Exercise 3: Downloader

Create an endpoint that downloads an image in the local machine given an URL. This endpoins must return if the request was successful or not.

Exercise 4: File manager

Create a bunch of endpoints that allows to create, retrieve, update and modify the content of a file given its name.

Exercise 5: Disk space

Create an endpoint that retrieves the following information of the filesystem / (root) of the local machine: Total size, used size, available size and percentage of capacity.

Tools

Postman

Postman is one of the most famous, if not the most, tools for firing requests to an API. It is very lightweight and fast. Requests can be organized in groups, also tests can be created with verifications for certain conditions on the response. With its features, it is very good and convenient API tool. It is possible to make different kinds of HTTP requests – GET, POST, PUT and DELETE. It is possible to add headers to the requests.

Authors

• Albert Suàrez

License

MIT © Albert Suàrez