sdlsurface.inc

//from "sdl_surface.h"

const
  {**
   *  Surface flags
   *
   *  These are the currently supported flags for the ::SDL_surface.
   *
   *  Used internally (read-only).
   *}

  SDL_SWSURFACE = 0;          {**< Just here for compatibility *}
  SDL_PREALLOC  = $00000001;  {**< Surface uses preallocated memory *}
  SDL_RLEACCEL  = $00000002;  {**< Surface is RLE encoded *}
  SDL_DONTFREE  = $00000004;  {**< Surface is referenced internally *}

  {*Surface flags*}

  {**
   *  Evaluates to true if the surface needs to be locked before access.
   *}

  //SDL_MUSTLOCK(S)	(((S)->flags & SDL_RLEACCEL) != 0)

type
  {**
   *  A collection of pixels used in software blitting.
   *
   *  This structure should be treated as read-only, except for \c pixels,
   *  which, if not NULL, contains the raw pixel data for the surface.
   *}

  PSDL_BlitMap = ^TSDL_BlitMap;
  TSDL_BlitMap = record
    map: Pointer;
  end;

  PSDL_Surface = ^TSDL_Surface;
  TSDL_Surface = record
    flags: UInt32;              {**< Read-only *}
    format: PSDL_PixelFormat;   {**< Read-only *}
    w, h: SInt32;               {**< Read-only *}
    pitch: SInt32;              {**< Read-only *}
    pixels: Pointer;            {**< Read-write *}

    {** Application data associated with the surface *}
    userdata: Pointer;          {**< Read-write *}

    {** information needed for surfaces requiring locks *}
    locked: SInt32;             {**< Read-only *}
    lock_data: Pointer;         {**< Read-only *}

    {** clipping information *}
    clip_rect: PSDL_Rect;       {**< Read-only *}

    {** info for fast blit mapping to other surfaces *}
    map: Pointer;               {**< Private *} //SDL_BlitMap

    {** Reference count -- used when freeing surface *}
    refcount: SInt32;           {**< Read-mostly *}
  end;

  {**
   *  The type of function used for surface blitting functions.
   *}

   TSDL_Blit = function(src: PSDL_Surface; srcrect: PSDL_Rect; dst: PSDL_Surface; dstrect: PSDL_Rect): SInt32;

  {**
   *  Allocate and free an RGB surface.
   *
   *  If the depth is 4 or 8 bits, an empty palette is allocated for the surface.
   *  If the depth is greater than 8 bits, the pixel format is set using the
   *  flags '[RGB]mask'.
   *
   *  If the function runs out of memory, it will return NULL.
   *
   *  flags The flags are obsolete and should be set to 0.
   *}

function SDL_CreateRGBSurface(flags: UInt32; width: SInt32; height: SInt32; depth: SInt32; Rmask: UInt32; Gmask: UInt32; Bmask: UInt32; Amask: UInt32): PSDL_Surface cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_CreateRGBSurface' {$ENDIF} {$ENDIF};
function SDL_CreateRGBSurfaceFrom(pixels: Pointer; width: SInt32; height: SInt32; depth: SInt32; pitch: SInt32; Rmask: UInt32; Gmask: UInt32; Bmask: UInt32; Amask: UInt32): PSDL_Surface cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_CreateRGBSurfaceFrom' {$ENDIF} {$ENDIF};
procedure SDL_FreeSurface(surface: PSDL_Surface) cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_FreeSurface' {$ENDIF} {$ENDIF};

  {**
   *  Set the palette used by a surface.
   *
   *  0, or -1 if the surface format doesn't use a palette.
   *
   *  A single palette can be shared with many surfaces.
   *}

function SDL_SetSurfacePalette(surface: PSDL_Surface; palette: PSDL_Palette): SInt32 cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_SetSurfacePalette' {$ENDIF} {$ENDIF};

  {**
   *  Sets up a surface for directly accessing the pixels.
   *
   *  Between calls to SDL_LockSurface() / SDL_UnlockSurface(), you can write
   *  to and read from surface.pixels, using the pixel format stored in
   *  surface.format. Once you are done accessing the surface, you should
   *  use SDL_UnlockSurface() to release it.
   *
   *  Not all surfaces require locking.  If SDL_MUSTLOCK(surface) evaluates
   *  to 0, then you can read and write to the surface at any time, and the
   *  pixel format of the surface will not change.
   *
   *  No operating system or library calls should be made between lock/unlock
   *  pairs, as critical system locks may be held during this time.
   *
   *  SDL_LockSurface() returns 0, or -1 if the surface couldn't be locked.
   *
   *  SDL_UnlockSurface()
   *}

function SDL_LockSurface(surface: PSDL_Surface): SInt32 cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_LockSurface' {$ENDIF} {$ENDIF};

  {** SDL_LockSurface() *}

procedure SDL_UnlockSurface(surface: PSDL_Surface) cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_UnlockSurface' {$ENDIF} {$ENDIF};

  {**
   *  Load a surface from a seekable SDL data stream (memory or file).
   *
   *  If freesrc is non-zero, the stream will be closed after being read.
   *
   *  The new surface should be freed with SDL_FreeSurface().
   *
   *  the new surface, or NULL if there was an error.
   *}

function SDL_LoadBMP_RW(src: PSDL_RWops; freesrc: SInt32): PSDL_Surface cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_LoadBMP_RW' {$ENDIF} {$ENDIF};

  {**
   *  Load a surface from a file.
   *
   *  Convenience macro.
   *}

function SDL_LoadBMP(_file: PAnsiChar): PSDL_Surface;

  {**
   *  Save a surface to a seekable SDL data stream (memory or file).
   *
   *  If freedst is non-zero, the stream will be closed after being written.
   *
   *  0 if successful or -1 if there was an error.
   *}

function SDL_SaveBMP_RW(surface: PSDL_Surface; dst: PSDL_RWops; freedst: SInt32): SInt32 cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_LoadBMP_RW' {$ENDIF} {$ENDIF};

    {**
     *  Save a surface to a file.
     *
     *  Convenience macro.
     *}
  {
  #define SDL_SaveBMP(surface, file) \
      SDL_SaveBMP_RW(surface, SDL_RWFromFile(file, "wb"), 1)
  }

  {**
   *  Sets the RLE acceleration hint for a surface.
   *
   *  0 on success, or -1 if the surface is not valid
   *  
   *  If RLE is enabled, colorkey and alpha blending blits are much faster,
   *  but the surface must be locked before directly accessing the pixels.
   *}

function SDL_SetSurfaceRLE(surface: PSDL_Surface; flag: SInt32): SInt32 cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_SetSurfaceRLE' {$ENDIF} {$ENDIF};

  {**
   *  Sets the color key (transparent pixel) in a blittable surface.
   *
   *  surface The surface to update
   *  flag Non-zero to enable colorkey and 0 to disable colorkey
   *  key The transparent pixel in the native surface format
   *
   *  0 on success, or -1 if the surface is not valid
   *
   *  You can pass SDL_RLEACCEL to enable RLE accelerated blits.
   *}

function SDL_SetColorKey(surface: PSDL_Surface; flag: SInt32; key: UInt32): SInt32 cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_SetColorKey' {$ENDIF} {$ENDIF};

  {**
   *  Gets the color key (transparent pixel) in a blittable surface.
   *
   *  surface The surface to update
   *  key A pointer filled in with the transparent pixel in the native
   *      surface format
   *
   *  0 on success, or -1 if the surface is not valid or colorkey is not
   *  enabled.
   *}

function SDL_GetColorKey(surface: PSDL_Surface; key: PUInt32): SInt32 cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_GetColorKey' {$ENDIF} {$ENDIF};

  {**
   *  Set an additional color value used in blit operations.
   *
   *  surface The surface to update.
   *  r The red color value multiplied into blit operations.
   *  g The green color value multiplied into blit operations.
   *  b The blue color value multiplied into blit operations.
   *
   *  0 on success, or -1 if the surface is not valid.
   *
   *  SDL_GetSurfaceColorMod()
   *}

function SDL_SetSurfaceColorMod(surface: PSDL_Surface; r: UInt8; g: UInt8; b: UInt8): SInt32 cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_SetSurfaceColorMod' {$ENDIF} {$ENDIF};

 {**
   *  Get the additional color value used in blit operations.
   *
   *  surface The surface to query.
   *  r A pointer filled in with the current red color value.
   *  g A pointer filled in with the current green color value.
   *  b A pointer filled in with the current blue color value.
   *
   *  0 on success, or -1 if the surface is not valid.
   *
   *  SDL_SetSurfaceColorMod()
   *}

function SDL_GetSurfaceColorMod(surface: PSDL_Surface; r: PUInt8; g: PUInt8; b: PUInt8): SInt32 cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_GetSurfaceColorMod' {$ENDIF} {$ENDIF};

  {**
   *  Set an additional alpha value used in blit operations.
   *
   *  surface The surface to update.
   *  alpha The alpha value multiplied into blit operations.
   *
   *  0 on success, or -1 if the surface is not valid.
   *
   *  SDL_GetSurfaceAlphaMod()
   *}

function SDL_SetSurfaceAlphaMod(surface: PSDL_Surface; alpha: UInt8): SInt32 cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_SetSurfaceAlphaMod' {$ENDIF} {$ENDIF};

  {**
   *  Get the additional alpha value used in blit operations.
   *
   *  surface The surface to query.
   *  alpha A pointer filled in with the current alpha value.
   *
   *  0 on success, or -1 if the surface is not valid.
   *
   *  SDL_SetSurfaceAlphaMod()
   *}

function SDL_GetSurfaceAlphaMod(surface: PSDL_Surface; alpha: PUInt8): SInt32 cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_GetSurfaceAlphaMod' {$ENDIF} {$ENDIF};

  {**
   *  Set the blend mode used for blit operations.
   *
   *  surface The surface to update.
   *  blendMode ::SDL_BlendMode to use for blit blending.
   *
   *  0 on success, or -1 if the parameters are not valid.
   *
   *  SDL_GetSurfaceBlendMode()
   *}

function SDL_SetSurfaceBlendMode(surface: PSDL_Surface; blendMode: TSDL_BlendMode): SInt32 cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_SetSurfaceBlendMode' {$ENDIF} {$ENDIF};

  {**
   *  Get the blend mode used for blit operations.
   *
   *  surface   The surface to query.
   *  blendMode A pointer filled in with the current blend mode.
   *
   *  0 on success, or -1 if the surface is not valid.
   *
   *  SDL_SetSurfaceBlendMode()
   *}

function SDL_GetSurfaceBlendMode(surface: PSDL_Surface; blendMode: PSDL_BlendMode): SInt32 cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_GetSurfaceBlendMode' {$ENDIF} {$ENDIF};

  {**
   *  Sets the clipping rectangle for the destination surface in a blit.
   *
   *  If the clip rectangle is NULL, clipping will be disabled.
   *
   *  If the clip rectangle doesn't intersect the surface, the function will
   *  return SDL_FALSE and blits will be completely clipped.  Otherwise the
   *  function returns SDL_TRUE and blits to the surface will be clipped to
   *  the intersection of the surface area and the clipping rectangle.
   *
   *  Note that blits are automatically clipped to the edges of the source
   *  and destination surfaces.
   *}

function SDL_SetClipRect(surface: PSDL_Surface; const rect: PSDL_Rect): TSDL_Bool cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_SetClipRect' {$ENDIF} {$ENDIF};

  {**
   *  Gets the clipping rectangle for the destination surface in a blit.
   *
   *  rect must be a pointer to a valid rectangle which will be filled
   *  with the correct values.
   *}

procedure SDL_GetClipRect(surface: PSDL_Surface; rect: PSDL_Rect) cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_GetClipRect' {$ENDIF} {$ENDIF};

  {**
   *  Creates a new surface of the specified format, and then copies and maps
   *  the given surface to it so the blit of the converted surface will be as
   *  fast as possible.  If this function fails, it returns NULL.
   *
   *  The flags parameter is passed to SDL_CreateRGBSurface() and has those
   *  semantics.  You can also pass SDL_RLEACCEL in the flags parameter and
   *  SDL will try to RLE accelerate colorkey and alpha blits in the resulting
   *  surface.
   *}

function SDL_ConvertSurface(src: PSDL_Surface; fmt: PSDL_PixelFormat; flags: UInt32): PSDL_Surface cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_ConvertSurface' {$ENDIF} {$ENDIF};
function SDL_ConvertSurfaceFormat(src: PSDL_Surface; pixel_format: UInt32; flags: UInt32): PSDL_Surface cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_ConvertSurfaceFormat' {$ENDIF} {$ENDIF};

  {**
   *  Copy a block of pixels of one format to another format
   *
   *  0 on success, or -1 if there was an error
   *}

function SDL_ConvertPixels(width: SInt32; height: SInt32; src_format: UInt32; const src: Pointer; src_pitch: SInt32; dst_format: UInt32; dst: Pointer; dst_pitch: SInt32): SInt32 cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_ConvertPixels' {$ENDIF} {$ENDIF};

  {**
   *  Performs a fast fill of the given rectangle with color.
   *
   *  If rect is NULL, the whole surface will be filled with color.
   *
   *  The color should be a pixel of the format used by the surface, and 
   *  can be generated by the SDL_MapRGB() function.
   *  
   *  0 on success, or -1 on error.
   *}

function SDL_FillRect(dst: PSDL_Surface; const rect: PSDL_Rect; color: UInt32): SInt32 cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_FillRect' {$ENDIF} {$ENDIF};
function SDL_FillRects(dst: PSDL_Surface; const rects: PSDL_Rect; count: SInt32; color: UInt32): SInt32 cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_FillRects' {$ENDIF} {$ENDIF};

  {**
   *  Performs a fast blit from the source surface to the destination surface.
   *
   *  This assumes that the source and destination rectangles are
   *  the same size.  If either \c srcrect or \c dstrect are NULL, the entire
   *  surface ( src or  dst) is copied.  The final blit rectangles are saved
   *  in srcrect and dstrect after all clipping is performed.
   *
   *  If the blit is successful, it returns 0, otherwise it returns -1.
   *
   *  The blit function should not be called on a locked surface.
   *
   *  The blit semantics for surfaces with and without alpha and colorkey
   *  are defined as follows:
   *
      RGBA->RGB:
        SDL_SRCALPHA set:
          alpha-blend (using alpha-channel).
          SDL_SRCCOLORKEY ignored.
        SDL_SRCALPHA not set:
          copy RGB.
          if SDL_SRCCOLORKEY set, only copy the pixels matching the
          RGB values of the source colour key, ignoring alpha in the
          comparison.

      RGB->RGBA:
        SDL_SRCALPHA set:
          alpha-blend (using the source per-surface alpha value);
          set destination alpha to opaque.
        SDL_SRCALPHA not set:
          copy RGB, set destination alpha to source per-surface alpha value.
        both:
          if SDL_SRCCOLORKEY set, only copy the pixels matching the
          source colour key.

      RGBA->RGBA:
        SDL_SRCALPHA set:
          alpha-blend (using the source alpha channel) the RGB values;
          leave destination alpha untouched. [Note: is this correct?]
          SDL_SRCCOLORKEY ignored.
        SDL_SRCALPHA not set:
          copy all of RGBA to the destination.
          if SDL_SRCCOLORKEY set, only copy the pixels matching the
          RGB values of the source colour key, ignoring alpha in the
         comparison.

      RGB->RGB:
        SDL_SRCALPHA set:
          alpha-blend (using the source per-surface alpha value).
        SDL_SRCALPHA not set:
          copy RGB.
        both:
          if SDL_SRCCOLORKEY set, only copy the pixels matching the
          source colour key.r
   *
   *  You should call SDL_BlitSurface() unless you know exactly how SDL
   *  blitting works internally and how to use the other blit functions.
   *}

  {**
   *  This is the public blit function, SDL_BlitSurface(), and it performs
   *  rectangle validation and clipping before passing it to SDL_LowerBlit()
   *}

function SDL_UpperBlit(src: PSDL_Surface; const srcrect: PSDL_Rect; dst: PSDL_Surface; dstrect: PSDL_Rect): SInt32 cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_UpperBlit' {$ENDIF} {$ENDIF};

  //SDL_BlitSurface = SDL_UpperBlit;

  {**
   *  This is a semi-private blit function and it performs low-level surface
   *  blitting only.
   *}

function SDL_LowerBlit(src: PSDL_Surface; srcrect: PSDL_Rect; dst: PSDL_Surface; dstrect: PSDL_Rect): SInt32 cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_LowerBlit' {$ENDIF} {$ENDIF};

  {**
   *  Perform a fast, low quality, stretch blit between two surfaces of the
   *  same pixel format.
   *
   *  This function uses a static buffer, and is not thread-safe.
   *}

function SDL_SoftStretch(src: PSDL_Surface; const srcrect: PSDL_Rect; dst: PSDL_Surface; const dstrect: PSDL_Surface): SInt32 cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_SoftStretch' {$ENDIF} {$ENDIF};

  //SDL_BlitScaled = SDL_UpperBlitScaled;

  {**
   *  This is the public scaled blit function, SDL_BlitScaled(), and it performs
   *  rectangle validation and clipping before passing it to SDL_LowerBlitScaled()
   *}

function SDL_UpperBlitScaled(src: PSDL_Surface; const srcrect: PSDL_Rect; dst: PSDL_Surface; dstrect: PSDL_Rect): SInt32 cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_UpperBlitScaled' {$ENDIF} {$ENDIF};

  {**
   *  This is a semi-private blit function and it performs low-level surface
   *  scaled blitting only.
   *}

function SDL_LowerBlitScaled(src: PSDL_Surface; srcrect: PSDL_Rect; dst: PSDL_Surface; dstrect: PSDL_Rect): SInt32 cdecl; external SDL_LibName {$IFDEF DELPHI} {$IFDEF MACOS} name '_SDL_LowerBlitScaled' {$ENDIF} {$ENDIF};