README_EN.md

This is an automatic translation, may be incorrect in some places. See sources and examples!

Gyveruart

Light library for working with a sequential port

• almost a complete analogue of Serial, but much easier

compatibility

Atmega328 and other from this generation

Content

• [installation] (# Install)
• [initialization] (#init)
• [use] (#usage)
• [Example] (# Example)
• [versions] (#varsions)
• [bugs and feedback] (#fedback)

Installation

• The library can be found by the name ** gyveruart ** and installed through the library manager in:
  • Arduino ide
  • Arduino ide v2
  • Platformio
• [download the library] (https://github.com/gyverlibs/gyvert/archive/refs/heads/main.zip). Zip archive for manual installation:
  • unpack and put in * C: \ Program Files (X86) \ Arduino \ Libraries * (Windows X64)
  • unpack and put in * C: \ Program Files \ Arduino \ Libraries * (Windows X32)
  • unpack and put in *documents/arduino/libraries/ *
  • (Arduino id) Automatic installation from. Zip: * sketch/connect the library/add .Zip library ... * and specify downloaded archive
• Read more detailed instructions for installing libraries [here] (https://alexgyver.ru/arduino-first/#%D0%A3%D1%81%D1%82%D0%B0%BD%D0%BE%BE%BE%BED0%B2%D0%BA%D0%B0_%D0%B1%D0%B8%D0%B1%D0%BB%D0%B8%D0%BE%D1%82%D0%B5%D0%BA)

Update

• I recommend always updating the library: errors and bugs are corrected in the new versions, as well as optimization and new features are added
• through the IDE library manager: find the library how to install and click "update"
• Manually: ** remove the folder with the old version **, and then put a new one in its place.“Replacement” cannot be done: sometimes in new versions, files that remain when replacing are deleted and can lead to errors!

initialization

No

Usage

Like Serial

Example

The rest of the examples look at ** Examples **! `` `CPP #incLude <gyveruart.h>

char data0 = 'b'; int8_t data1 = -50; Uint8_t Data2 = 125; Int16_t Data3 = -2000; Uint16_t Data4 = 30000; Int32_T DATA5 = -70000; Uint32_T DATA6 = 4194967295; Float Data7 = 3681.65424; Float Data8 = -4375.12353; String Data9 = "Lol Lol";

const char *DATA10 [] = {{ "Lol", "Kek", "Cheburek", };

Byte data11 = 0b11101011; Uint32_T DATA12 = 0XFAB666;

VOID setup () { uart.begin (); UART.PRINTLN (DATA0); urt.println (Data1); urt.println (Data2); UART.PRINTLN (DATA3); urt.println (Data4); urt.println (Data5); urt.println (Data6); urt.println (Data7); urt.println (Data8, 3); UART.PRINTLN (DATA9); urt.println ("Kek Kek"); uart.println (F ("Kek Kek Macro")); urt.println (Data10 [2]); urt.println (Data11, Bin); urt.println (Data12, Hex); }

VOID loop () { } `` `

versions

• V1.2 - Added cyclic buffer
• V1.3 - The conclusion of Float is corrected and the conclusion with the basis has been added
• V1.4 - Liba is assembled to class, added by ReadStringuntil
• v1.5 - added a buffer for sending and Flush
• V1.6 - Record and reading accelerated
• V1.7 - The code is slightly optimized
• V1.8 - Found Write (thanks to Eugenebartosh)
• V1.9 - Found Write + Optimization + Support USART0 Atmega2560 (By Siliverst)
• V1.10 - The conclusion was transferred to Print.h.The size has become a little larger, but it will be smaller when working with Dcranberries on Print.h

bugs and feedback

Create ** Issue ** when you find the bugs, and better immediately write to the mail [[email protected]] (mailto: [email protected]) The library is open for refinement and your ** pull Request ** 'ow!

When reporting about bugs or incorrect work of the library, it is necessary to indicate:

• The version of the library
• What is MK used
• SDK version (for ESP)
• version of Arduino ide
• whether the built -in examples work correctly, in which the functions and designs are used, leading to a bug in your code
• what code has been loaded, what work was expected from it and how it works in reality
• Ideally, attach the minimum code in which the bug is observed.Not a canvas of a thousand lines, but a minimum code