serial battery JKbms 0.14.3 show #3 and # 4

[MS123uk]

serial battery JKbms driver V 0.14.3 show ess #3 and ess # 4 alarm but charge and discharge blocking
has not showing phone app

JKBMS S8 24v

Charging
76 W
97.0 %
ESS #4
Voltage
27.02 V
Current
2.82 A
Temperature
1 °C
ESS #4
BMS disabled discharge

[Louisvdw]

can you show us your serialbattery log file?

Troubleshoot

[MS123uk]

login as: root
[email protected]'s password:
Last login: Fri Dec 30 17:38:05 2022 from 192.168.0.5
root@raspberrypi4:~# /data/log/serial-starter/current
-sh: /data/log/serial-starter/current: Permission denied
root@raspberrypi4:~# /data/log/dbus-serialbattery.ttyUSB0/current where ttyUSB0 will be your USB port (ttyUSB0/ttyUSB1/ttyUSB2/etc.)
-sh: syntax error near unexpected token `('
root@raspberrypi4:~# /data/log/dbus-serialbattery.ttyUSB0/current where ttyUSB0 will be your USB port (ttyUSB0/ttyUSB1/ttyUSB2/etc.)/data/log/dbus-serialbattery.ttyUSB0/current where ttyUSB0 will be your USB port (ttyUSB0/ttyUSB1/ttyUSB2/etc.)

[mr-manuel]

Do the issue persist or did you solve it?

[MS123uk]

still not solve

[mr-manuel]

Could you try to install this version?

wget -O /tmp/install-nightly.sh https://raw.githubusercontent.com/Louisvdw/dbus-serialbattery/jkbms_ble/etc/dbus-serialbattery/install-nightly.sh && bash /tmp/install-nightly.sh

Then select 2 for jkbms_ble branch. It's the most updated one. You don't have to configure Bluetooth, just ignore it.

[MS123uk]

have install but now will show in device list

[mr-manuel]

Can you please explain better?

[MS123uk]

too start with installed this wget -O /tmp/install-nightly.sh https://raw.githubusercontent.com/Louisvdw/dbus-serialbattery/jkbms_ble/etc/dbus-serialbattery/install-nightly.sh && bash /tmp/install-nightly.sh
and selected 2 for jk bms and rebooted but driver did not show in VRN and no conn between bms and raspberry i so fund new web page https://louisvdw.github.io/dbus-serialbattery/general/install and used this install and this now up running just trying to work out if its most upto date one

[mr-manuel]

You see the driver version in the log and in the GUI SerialBattery -> Device -> Firmware version.

[mr-manuel]

Did you troubleshoot, when the driver did not show? It did not show in the GUI or only in the VRM Portal?

It it's try for you to write englisch try deepl.com, it translates very well.

[MS123uk]

You see the driver version in the log and in the GUI SerialBattery -> Device -> Firmware version.

this is what its showing in Serial Battery -> Device -> Firmware version. 0.14.3

[MS123uk]

GUI ?

[mr-manuel]

GUI/Remote Console

With v0.14.3 you have the latest release, but not the latest up to date available version. See Install over SSH: nightly version/beta test and then troubleshoot it it's not working.

[MS123uk]

when the driver did not show? It did not show in the GUI or only in the VRM Portal?

It did not show remote console or VRM Portal device list and you can see from the converter TX but no RX

[mr-manuel]

P.S.: Instead of taking a picture of your screen, you can make a screenshot by pressing Windows Key + Shift + S, select what you want to capture and then paste directly in the text box of GitHub.

[MS123uk]

will do thanks

[MS123uk]

password ?

tying to troubleshoot but locked out log fills ?

[mr-manuel]

Just click the link in the manual or use the search.