Chameleon Ultra not able to emulate em410x cards

[wintersushi]

Recently got a myself a Chameleon Ultra, using the Gui i was able to emulate, write and copy HF cards. Although, all of the LF rfid cards i have tried to emulate do not seem to work. I've tried a handful of different cards, as well as updating the firmware and clearing the slots.

I am a beginner with all this but even when reading through the forums and watching videos, everyone seems to simply scan the card with the LF scanner, copy the UID and it works. I'm wondering if i'm missing something or if anyone has experienced anything similar and could help resolving this issue?

[GameTec-live]

https://github.com/RfidResearchGroup/ChameleonUltra/blob/main/docs/troubleshooting.md

Or you might be affected by #175

[wintersushi]

https://github.com/RfidResearchGroup/ChameleonUltra/blob/main/docs/troubleshooting.md

Or you might be affected by #175

I'm a little confused, if I can read the LF cards and copy it onto the Chameleon - how can it have glue blocking it and interfering with the emulation?

[GameTec-live]

Ah, you can read the cards... Then there being glue doesnt really make sense...

[wintersushi]

Ah, you can read the cards... Then there being glue doesnt really make sense...

Yeah! I can read the LF cards and get the UID with no issue but whenever I try to emulate them with the chameleon, the blue and white light will turn on while next to the sensor but nothing happens.

Only in one instance did it miraculously work, I tried hovering it over the sensor in different positions and different angles of the chameleon - maybe 1/10 times does it work for that one card.

So I'm not sure if this is stupid question, and I'm suppose to have more than the UID or steps I've missed when copying the card?

[GameTec-live]

Nope, that seems to be correct... probably a modulation issue or similar like in #175 then...

[Nextery]

Ah lucky one. I can read LF cards only on 1.0 firmware, but UID is always 00000000. On 2.0 I’m getting an error “No card found, try to move Chameleon on card”

[kayantoast]

Ah lucky one. I can read LF cards only on 1.0 firmware, but UID is always 00000000. On 2.0 I’m getting an error “No card found, try to move Chameleon on card”

I just got the Chameleon ultra as well an am facing this exact same issue. Any solutions for this so far?

[whywilson]

Ah lucky one. I can read LF cards only on 1.0 firmware, but UID is always 00000000. On 2.0 I’m getting an error “No card found, try to move Chameleon on card”

I just got the Chameleon ultra as well an am facing this exact same issue. Any solutions for this so far?

Contact your seller and get the replacement of the bottom board. It will solve the issues.

[ffcrus]

Contact your seller and get the replacement of the bottom board. It will solve the issues.

I have exactly the same problem. My device does not emulate LF cards. I ordered from indiegogo about a year ago. How can I contact the seller for the bottom board replacement?