Skip to content

Latest commit

 

History

History
109 lines (82 loc) · 4.91 KB

iOS-Installation-Instructions.md

File metadata and controls

109 lines (82 loc) · 4.91 KB
Raw

iOS Installation Instructions

Table of Contents

Install the required dependencies

^Top

If you are using unc0ver or checkra1n, see On Bingner bootstrap Otherwise, see On Procursus bootstrap Note: compilation has not yet been attempted on Procursus' bootstrap or on rootless. Attempt at your own peril.

On Bingner bootstrap

^Top

Run this as root, as sudo isn't installed by default. The default password is alpine.

apt install git make clang odcctools gawk sudo pkg-config python3.7 libpython3.7-dev

Furthermore, if you're trying to build from git instead of a release, you'll need SWIG from The-SamminAter's repo.

On Procursus bootstrap

^Top

Currently, you're on your own. Most of the packages should be named similarly, but sometimes Procursus packages up components differently than bingner. Furthermore, if you're using a rootless jailbreak and want to build from git, you'll likely have to port over SWIG yourself.

Patched SDK and additional patches

^Top

  1. Git clone theos/sdks and symlink or move the target version (tested with 13.7, others should work) to /usr/share/SDKs/iPhoneOS.sdk.
  2. Delete __IOS_PROHIBITED from line 188 of iPhoneOS.sdk/usr/include/stdlib.h
  3. Git clone theos/headers and move headers/openssl to iPhoneOS.sdk/usr/include/
  4. Download the latest macOS SDK from phracker/MacOSX-SDKs (tested with 11.3) and move MacOSX.sdk/System/Library/Frameworks/OpenCL.framework and OpenGL.framework to iPhoneOS.sdk/System/Library/Frameworks/

Note: when compiling hitag2crack/crack5opencl, the following warning is to be expected:

ld: warning: building for iOS, but linking in .tbd file (/usr/share/SDKs/iPhoneOS.sdk/System/Library/Frameworks//OpenCL.framework/OpenCL.tbd) built for macOS

Clone the Iceman repository

^Top

git clone https://github.com/RfidResearchGroup/proxmark3.git

Compile and use the project

^Top

Now you're ready to (mostly) follow the compilation instructions.

bootrom, fullimage, and recovery

^Top

Because there's no arm-none-eabi-gcc (or objcopy) for iOS, you'll have to build these components on a different operating system. The files and directories you'll need to copy over from a desktop build to iOS are armsrc/fpga_version_info.c, armsrc/obj/, bootrom/version_pm3.c, bootrom/obj/, and lastly recovery/. Everything else will build successfully, but make all and make install will fail without them.

make install

^Top

Because of the lack of arm-none-eabi-gcc (and objcopy), to successfully run make all and/or make install you'll have to create the following scripts as a workaround.

/usr/local/bin/arm-none-eabi-gcc and arm-none-eabi-objcopy

#!/bin/bash
#This exists just to trick proxmark3 into making the fullimage, bootrom, and recovery
#Don't worry about it
cc --version
echo "Arguments: $@"

With those in place, make all and make install will run flawlessly.

usbselfserial

^Top

As iOS doesn't support USB-CDC ACM, you'll need to use usbselfserial. A compiled binary can be found at The-SamminAter's repo.

Once the proxmark is connected to your iOS device via a USB adapter, run usbselfserial -v 0x9ac4 -p 0x4b8f --driver cdcacm -o /tmp/tty.usbmodemiceman1 (for devices other than the PM3 Easy, adjust the identifiers accordingly). If proxmark3 can't communicate with the device, try providing the port as an argument, or run sudo killall usbmuxd.

Lastly, it may also be helpful to modify pm3 as follows, to automatically select the right port:

function get_pm3_list_macOS {
    N=$1
    #PM3LIST=()
    PM3LIST=(/tmp/tty.usbmodemiceman1) #<-- our addition
    for DEV in $(ioreg -r -c "IOUSBHostDevice" -l | awk -F '"' '
        $2=="USB Vendor Name"{b=($4=="proxmark.org")}
        b==1 && $2=="IODialinDevice"{print $4}'); do
        PM3LIST+=("$DEV")
        if [ ${#PM3LIST[*]} -ge "$N" ]; then
            return
        fi
    done
}