Some scripts use hardcoded tools path

[CoelacanthusHex]

Describe the bug

Some scripts use hardcoded tools path, if packager changes INSTALLTOOLSRELPATH when installing the proxmark3 client (Arch Linux packager did it, see https://gitlab.archlinux.org/archlinux/packaging/packages/proxmark3/-/blob/main/PKGBUILD?ref_type=heads ), it will try to find it in the default path, and fail to find it.

proxmark3/client/pyscripts/fm11rf08s_recovery.py

Lines 60 to 61 in 59ae5d2

	TOOLS_PATH = os.path.normpath(os.path.join(DIR_PATH,
	"..", "tools"))

To Reproduce

1. Install Proxmark3 client with INSTALLTOOLSRELPATH=bin and PREFIX=/usr (so tools will in /usr/bin)
2. script run fm11rf08_full
3. See error

[usb] pm3 --> script run fm11rf08_full
[+] executing python /usr/bin/../share/proxmark3/pyscripts/fm11rf08_full.py
[+] args ''
Cannot find /usr/share/proxmark3/tools/staticnested_1nt, abort!
[!] ⚠  Script terminated by SystemExit -1
[!] ⚠  finished fm11rf08_full with exception

Expected behavior

The script runs normally.

Desktop (please complete the following information):

• OS: Arch Linux
• inside proxmark3 client run the following commands and paste the output here.
• hw version

Details

``` [usb] pm3 --> hw version

[ Proxmark3 RFID instrument ]

[ Client ]
Iceman/master/v4.19552-suspect 2024-11-22 12:15:19 a3319015f
compiled with............. GCC 14.2.1 20240910
platform.................. Linux / x86_64
Readline support.......... present
QT GUI support............ present
native BT support......... present
Python script support..... present ( 3.12.7 )
Python SWIG support....... present
Lua script support........ present ( 5.4.7 )
Lua SWIG support.......... present

[ Proxmark3 ]
device.................... device / fw mismatch
firmware.................. RDV4
external flash............ present
smartcard reader.......... present
FPC USART for BT add-on... absent

[ ARM ]
bootrom: Iceman/master/v4.19552-suspect 2024-11-22 12:15:19 a3319015f
os: Iceman/master/v4.19552-suspect 2024-11-22 12:15:19 a3319015f
compiled with GCC 14.1.0

[ FPGA ]
fpga_pm3_hf.ncd image 2s30vq100 2024-02-03 15:12:20
fpga_pm3_lf.ncd image 2s30vq100 2024-02-03 15:12:10
fpga_pm3_felica.ncd image 2s30vq100 2024-02-03 15:12:41
fpga_pm3_hf_15.ncd image 2s30vq100 2024-02-03 15:12:31

[ Hardware ]
--= uC: AT91SAM7S512 Rev A
--= Embedded Processor: ARM7TDMI
--= Internal SRAM size: 64K bytes
--= Architecture identifier: AT91SAM7Sxx Series
--= Embedded flash memory 512K bytes ( 72% used )

</details>
 - hw status
 

<details>
<summary>Details</summary>

[usb] pm3 --> hw status
[#] Memory
[#] BigBuf_size............. 39424
[#] Available memory........ 39424
[#] Tracing
[#] tracing ................ 0
[#] traceLen ............... 130
[#] Current FPGA image
[#] mode.................... fpga_pm3_hf.ncd image 2s30vq100 2024-02-03 15:12:20
[#] Flash memory
[#] Baudrate................ 24 MHz
[#] Init.................... ok
[#] Mfr ID / Dev ID......... EF / 11
[#] JEDEC Mfr ID / Dev ID... EF / 3012
[#] Device.................. W25X20BV
[#] Memory size............. 256 kB (4 pages * 64k)
[#] Unique ID (be).......... 0x2C2D5063922861D5
[#] Smart card module (ISO 7816)
[#] version................. v4.42 ( ok )
[#] LF Sampling config
[#] [q] divisor............. 95 ( 125.00 kHz )
[#] [b] bits per sample..... 8
[#] [d] decimation.......... 1
[#] [a] averaging........... no
[#] [t] trigger threshold... 0
[#] [s] samples to skip..... 0
[#]
[#] LF T55XX config
[#] [r] [a] [b] [c] [d] [e] [f] [g]
[#] mode |start|write|write|write| read|write|write
[#] | gap | gap | 0 | 1 | gap | 2 | 3
[#] ---------------------------+-----+-----+-----+-----+-----+-----+------
[#] fixed bit length (default) | 29 | 17 | 15 | 47 | 15 | n/a | n/a |
[#] long leading reference | 29 | 17 | 18 | 50 | 15 | n/a | n/a |
[#] leading zero | 29 | 17 | 18 | 40 | 15 | n/a | n/a |
[#] 1 of 4 coding reference | 29 | 17 | 15 | 31 | 15 | 47 | 63 |
[#]
[#] HF 14a config
[#] [a] Anticol override.... std ( follow standard )
[#] [b] BCC override........ std ( follow standard )
[#] [2] CL2 override........ std ( follow standard )
[#] [3] CL3 override........ std ( follow standard )
[#] [r] RATS override....... std ( follow standard )
[#] Transfer Speed
[#] Sending packets to client...
[#] Time elapsed................... 500ms
[#] Bytes transferred.............. 362496
[#] Transfer Speed PM3 -> Client... 724992 bytes/s
[#] Various
[#] Max stack usage......... 5224 / 8480 bytes
[#] Debug log level......... 1 ( error )
[#] ToSendMax............... 75
[#] ToSend BUFFERSIZE....... 2308
[#] Slow clock.............. 30891 Hz
[#] Installed StandAlone Mode
[#] LF HID26 standalone - aka SamyRun (Samy Kamkar)
[#] Flash memory dictionary loaded
[#] Mifare.................. 2042 / 2047 keys
[#] T55x7................... 124 / 1023 keys
[#] iClass.................. 29 / 511 keys
[#]

</details>

 - data tune

**Additional context**
Add any other context about the problem here.

[CoelacanthusHex]

A possible solution is to define some constants like TOOLS_PATH in the pm3 Python package. So the scripts maintainers needn't determine the location of these paths.