Register

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/3325

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v1.1.0 -m "<description of version>" e4aa09f5ec0b2ebdf51af06a4f11833da1a2ef27
git push origin v1.1.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/3699

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v1.1.1 -m "<description of version>" d7a8f0f8276a5e9e837587ba78ee414299ba6ea5
git push origin v1.1.1

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/4114

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v1.2.0 -m "<description of version>" f9b2ee28e57af109504d6fbae971f7132e9d2de9
git push origin v1.2.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/4143

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v1.3.0 -m "<description of version>" 2b28d683c60a4b1897df0b2ee9b9d35c23c9a17d
git push origin v1.3.0

Also, note the warning: Version 1.3.0 skips over 1.2.0
This can be safely ignored. However, if you want to fix this you can do so. Call register() again after making the fix. This will update the Pull request.

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/4157

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v1.3.1 -m "<description of version>" 383f63b92bbfd689633b43e6d30974e845459b26
git push origin v1.3.1

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/17639

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v3.1.0 -m "<description of version>" 5360ba5855bceaf957c4a0475c54a9b52e05acbc
git push origin v3.1.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/17649

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v3.1.1 -m "<description of version>" 6ce4aac300fb521b55f775c1b123ad9a09b5ea81
git push origin v3.1.1

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/17718

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v3.1.2 -m "<description of version>" 2ae78468ae463de82a43ad95370b55f7b7467ba4
git push origin v3.1.2

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/19277

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v3.1.3 -m "<description of version>" 0f3c868b2ee2987311c7d13ec01cf0f1406d50dc
git push origin v3.1.3

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/20915

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v3.2.0 -m "<description of version>" b879c55056d9385add016301bb01318d4be429d0
git push origin v3.2.0

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/94788

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.5.0 -m "<description of version>" 219196acd53b9b5c607050e87a0583be1d246107
git push origin v4.5.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/94788

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.5.0 -m "<description of version>" e9a46f26a25ba4c97fffe5ff8f8b5f9c1d725c12
git push origin v4.5.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/96873

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.6.0 -m "<description of version>" d736677641864e5c6d1366b2daae4b6deca6e848
git push origin v4.6.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/102157

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.6.1 -m "<description of version>" 2932450194c2acfccee2534cc9ba1a1118d38a29
git push origin v4.6.1

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/102158

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.7.0 -m "<description of version>" 2e05ec1ec4c1d2d41fbd930bfe437498ba703420
git push origin v4.7.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/103776

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.7.1 -m "<description of version>" 15eab750e75c0a626f156f5b65a53d8c81103547
git push origin v4.7.1

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/105255

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.7.2 -m "<description of version>" e1c9f8b132a051eac79e9ec09f6f8300a60f5858
git push origin v4.7.2

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/106223

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.8.0 -m "<description of version>" b1f9851a5999d5e51ca3399c72df40df6381a9ae
git push origin v4.8.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/111104

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v5.3.0 -m "<description of version>" 5ab74328d6795fe03fc0f7102adefaba94c095d0
git push origin v5.3.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/112128

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v6.1.0 -m "<description of version>" 80c8ebbb0248caa98a09387457aabc4b1ce688d6
git push origin v6.1.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/116591

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v6.4.2 -m "<description of version>" aa02884cfd896719a81c04fe4a121c455811af94
git push origin v6.4.2