This program provides an email like distribution group. It will distribute incoming LXMF messages to multiple recipients. Since this program acts as a normal LXMF endpoint, all compatible chat applications can be used. In addition to simple messaging, there is a simple command-based user interface. Where all relevant actions for daily administration can be performed. The basic configuration is done in the configuration files. There are various options to adapt the entire behavior of the group to personal needs. This distribution group is much more than a standard email distribution group. It emulates advanced group functions with automatic notifications etc. Different user permissions can be defined. For each user type, the range of functions can be defined individually. The normal users have only small rights. While a moderator or admin can perform everything necessary by simple commands. Once the basic configuration is done, everything else can be done by LXMF messages as commands.
For more information, see the configuration options (at the end of the program files). Everything else is briefly documented there. After the first start this configuration will be created as default config in the corresponding file.
- Compatible with all LXMF applications (NomadNet, Sideband, ...)
- Server/Node based message routing and processing
- Direct or propagated message delivery (receive/send)
- Simple group functions (As in other messenger apps)
- User authorization and permissions
- Different user types with different permissions
- Automatic or manual group joining
- Text based interface to display advanced functions or infos
- Cluster of several groups (communication between groups with different levels)
- Automatic negotiation of the clusters
- Statistics at cluster, router, group and user level
- Easy configuration within readable config files
- Various admin commands for the daily tasks to be controlled via LXMF messages
- Group description, rules and pinned messages
- Optional enableable waiting room for new members before joining the group
- Multiple language support (English & German are predifined)
In a small group of people, this group software can be hosted on a centrally located node. This then allows users to communicate with each other via this group.
On the same node/server several groups can be operated independently of each other. How this works is described below in the installation instructions.
It is possible to connect several locally independent groups to a cluster. This makes it possible to send messages from one group to another.
A group cluster can be built in several levels. A group can be labeled with several names according to the naming of the levels.
This makes it possible, for example to send a messages to several groups at the same time. So you could define the cluster names as follows. Country/Region/City
With this it is possible to contact all groups of a certain country or region.
All messages between client<->group-server and group-server<->group-server are transported as single 1:1 messages in the LXMF/Reticulum network. Accordingly, encryption takes place between these end points. If a direct delivery of the message does not work, it is sent to a propagation node. There it is stored temporarily and can be retrieved by the client later.
As these are normal LXMF messages, any LXMF capable application can be used to communicate with the group.
When a message is sent to a multi-level (hierarchical) cluster. A 1:1 connection is always established from the source to each target group in this cluster level.
There is no central server for communication between the individual groups. This offers the advantage that all groups work autonomously. A failure of a group only affects this one local group.
It should currently be considered beta software and still work in progress.
All core features are implemented and functioning, but additions will probably occur as real-world use is explored.
There may be errors or the compatibility after an update is no longer guaranteed.
The full documentation is not yet available. Due to lack of time I can also not say when this will be further processed.
- Planned, but not yet scheduled
- Propagation Node fallback
- Parameters for backup/restore configuration and data
- Parameters for backup/restore identity
- Cluster bridges/repeater
- Different message priorities
- Fallback solution: Master/Slave
- Centralized user/group authorization
- Internal queue with prioritization
- More intelligent messages sending
- Command to display the send status of the last message
- Automatic send confirmation
- Complete documentation
- Install all required prerequisites. (Default Reticulum installation. Only necessary if reticulum is not yet installed.)
apt update apt upgrade apt install python3-pip pip install pip --upgrade reboot pip3 install rns pip3 install pyserial netifaces pip3 install lxmf
- Change the Reticulum configuration to suit your needs and use-case.
nano /.reticulum/config
- Download the file from this repository.
wget https://raw.githubusercontent.com/SebastianObi/LXMF-Tools/main/lxmf_distribution_group_extended/lxmf_distribution_group_extended.py
- Make it executable with the following command
chmod +x lxmf_distribution_group_extended.py
- Start it
./lxmf_distribution_group_extended.py
- After the first start edit the configuration file to suit your needs and use-case. The file location is displayed.
- Example minimal configuration (override of the default config
config.cfg). These are the most relevant settings that need to be adjusted. All other settings are inconfig.cfgnano /root/.lxmf_distribution_group_extended/config.cfg.owr
# This is the user configuration file to override the default configuration file. # All settings made here have precedence. # This file can be used to clearly summarize all settings that deviate from the default. # This also has the advantage that all changed settings can be kept when updating the program. #### Main program settings #### [main] # Default language. lng = en # en/de #### LXMF connection settings #### [lxmf] # The name will be visible to other peers # on the network, and included in announces. # It is also used in the group description/info. display_name = Distribution Group # Propagation node address/hash. propagation_node = ca2762fe5283873719aececfb9e18835 # Set propagation node automatically. propagation_node_auto = True # Try to deliver a message via the LXMF propagation network, # if a direct delivery to the recipient is not possible. try_propagation_on_fail = Yes #### Cluster settings #### [cluster] # Enable/Disable this functionality. enabled = True # To use several completely separate clusters/groups, # an individual name and type can be assigned here. name = grp type = cluster # Slash-separated list with the names of this cluster. # This feature can be used to build multi level group structures. # All send messages that match the name (all levels) will be received. # The last name is the main name of this group and is used as source for send messages. # No spaces are allowed in the name. display_name = County/Region/City #### Router settings #### [router] # Enable/Disable router functionality. enabled = True # Comma-separated list with the names for which the messages are to be routed/repeated. # The names and levels must match the used display_name of the cluster accordingly. # No spaces are allowed in the name. display_name = Country,Country/Region #### High availability settings #### [high_availability] # Enable/Disable this functionality. enabled = False # Role of this node (master/slave) role = master # Peer address peer = #### Statistic/Counter settings #### [statistic] # Enable/Disable this functionality. enabled = True
- Start it again. Finished!
./lxmf_distribution_group_extended.py
- Create a service file.
nano /etc/systemd/system/lxmf_distribution_group_extended.service
- Copy and edit the following content to your own needs.
[Unit] Description=lxmf_distribution_group_extended After=multi-user.target [Service] # ExecStartPre=/bin/sleep 10 Type=simple Restart=always RestartSec=3 User=root Group=root ExecStart=/root/lxmf_distribution_group_extended.py [Install] WantedBy=multi-user.target - Enable the service.
systemctl enable lxmf_distribution_group_extended - Start the service.
systemctl start lxmf_distribution_group_extended
systemctl start lxmf_distribution_group_extended
systemctl stop lxmf_distribution_group_extendedsystemctl enable lxmf_distribution_group_extended
systemctl disable lxmf_distribution_group_extended- Run the program with a different configuration path.
./lxmf_distribution_group_extended.py -p /root/.lxmf_distribution_group_extended_2nd ./lxmf_distribution_group_extended.py -p /root/.lxmf_distribution_group_extended_3nd
- After the first start edit the configuration file to suit your needs and use-case. The file location is displayed.
- With a manual start via the console, the own group LXMF address is displayed:
[] ............................................................................... [] LXMF - Address: <801f48d54bc71cb3e0886944832aaf8d> [] ...............................................................................` - This address is also annouced at startup in the default setting.
- If auto add user is active (default) you can simply send a first message via Sideband/NomadNet to this address. After that you are a member of the group and can use the functions.
- Alternatively, the users can also be entered manually in the
data.cfgfile. It is necessary to add an admin user here to use all commands via LXMF messages! - Now the group can be used.
usage: lxmf_distribution_group_extended.py [-h] [-p PATH] [-pr PATH_RNS] [-pl PATH_LOG] [-l LOGLEVEL] [-s] [--exampleconfig] [--exampleconfigoverride] [--exampledata]
LXMF Distribution Group - Server-Side group functions for LXMF based apps
optional arguments:
-h, --help show this help message and exit
-p PATH, --path PATH Path to alternative config directory
-pr PATH_RNS, --path_rns PATH_RNS
Path to alternative Reticulum config directory
-pl PATH_LOG, --path_log PATH_LOG
Path to alternative log directory
-l LOGLEVEL, --loglevel LOGLEVEL
-s, --service Running as a service and should log to file
--exampleconfig Print verbose configuration example to stdout and exit
--exampleconfigoverride
Print verbose configuration example to stdout and exit
--exampledata Print verbose configuration example to stdout and exit-
config.cfg
This is the default config file.
-
config.cfg.owr
This is the user configuration file to override the default configuration file. All settings made here have precedence. This file can be used to clearly summarize all settings that deviate from the default. This also has the advantage that all changed settings can be kept when updating the program.
-
data.cfg
This is the data file. It is automatically created and saved/overwritten. It contains data managed by the software itself. If manual adjustments are made here, the program must be shut down first!
The configurations shown here are only a part of the total configuration.
It only serves to show the configuration that is necessary and adapted for the respective function.
All configurations must be made in the file config.cfg.owr.
All possible settings can be seen in the default configuration file config.cfg.
This example shows the configuration for a cluster with 2 groups. This allows communication between both groups. It is possible to write directly to each group or to the higher level which then includes both groups.
-
Group #1
config.cfg.owr[lxmf] display_name = Group Test 1 [cluster] enabled = True name = test type = cluster display_name = Germany/NRW/Düsseldorf -
Group #1
data.cfg[main] enabled_cluster = True auto_add_cluster = True -
Group #2
config.cfg.owr[lxmf] display_name = Group Test 2 [cluster] enabled = True name = test type = cluster display_name = Germany/Bayern/München -
Group #2
data.cfg[main] enabled_cluster = True auto_add_cluster = True
This example shows the configuration for 2 separate clusters.
This makes it possible to operate several clusters in parallel via the same communication network.
It is important to configure the name and type differently.
-
Cluster #1 - Group #1
config.cfg.owr[lxmf] display_name = Group Test 1 [cluster] enabled = True name = test1 type = cluster display_name = Germany/NRW/Düsseldorf -
Cluster #1 - Group #1
data.cfg[main] enabled_cluster = True auto_add_cluster = True -
Cluster #2 - Group #1
config.cfg.owr[lxmf] display_name = Group Test 1 [cluster] enabled = True name = test2 type = cluster display_name = Germany/NRW/Düsseldorf -
Cluster #2 - Group #1
data.cfg[main] enabled_cluster = True auto_add_cluster = True
Normally all data here (data.cfg) is created automatically by the software. Based on automatic creation of new users/clusters or executed commands for administration.
Here are a few examples of how the content can look. Of course, the file can also be edited manually. This is necessary if an auto add is disabled.
Please do not forget to close the program first!
-
Group #1
data.cfg[user] 04652a820cc69d47940ce39050c455a6 = Test User 1 [cluster] d1b551e1b89fff5a4a6f2aaff2464971 = Germany/Bayern/München -
Group #2
data.cfg[user] 18201a931dd69d47940ce39050c487c9 = Test User 1 [cluster] 801f48d54bc71cb3e0886944832aaf8d = Germany/NRW/Düsseldorf
Not yet implemented
config.cfg.owr[lxmf] announce_startup = Yes announce_startup_delay = 0 #Seconds announce_periodic = Yes announce_periodic_interval = 120 #Minutes
config.cfg.owr[lxmf] desired_method = direct #direct/propagated propagation_node = ca2762fe5283873719aececfb9e18835 propagation_node_auto = True try_propagation_on_fail = Yes
config.cfg.owr[lxmf] propagation_node = ca2762fe5283873719aececfb9e18835 propagation_node_auto = True sync_startup = Yes sync_startup_delay = 30 #Seconds sync_periodic = Yes sync_periodic_interval = 30 #Minutes sync_limit = 8
This example shows the configuration for a waiting room for new members. When an unknown user joins the group by the first message to the group, he is added to the "wait" type. There he will be in a kind of waiting room where no messages can be written and received. An admin or moderator can then allow or disallow this user.
The configuration shows only the minimum necessary part for this functionality. Of course, further rights can be assigned to the users.
-
config.cfg.owr[rights] admin = interface,receive_join,allow,deny mod = interface,receive_join,allow,deny wait = [interface_messages] auto_add_wait = Welcome to the group "!display_name!"!!n!!n!You still need to be allowed to join. You will be notified automatically. auto_add_wait-de = Willkommen in der Gruppe "!display_name!"!!n!!n!Der Beitritt muss ihnen noch erlaubt werden. Sie werden darüber automatisch benachrichtigt. allow_user = You have been allowed to join the group "!display_name!"!!n!!n!!description!!n!!n!The messages sent here are distributed to all group members.!n!!n!For help enter /?!n!!n!To read the group rules use the command /rules!n!!n!Please assign a nickname with the command /name allow_user-de = Sie wurden erlaubt der Gruppe "!display_name!" beizutreten!!n!!n!!description!!n!!n!Die hier gesendeten Nachrichten werden an alle Gruppenmitglieder verteilt.!n!!n!Für Hilfe geben Sie /? ein.!n!!n!Um die Gruppenregeln zu lesen verwenden Sie den Befehl /rules!n!!n!Bitte vergeben Sie einen Nickname mit dem Befehl /name deny_user = You have been denied to join the group "!display_name!"! deny_user-de = Ihnen wurde der Beitritt in die Gruppe "!display_name!" abgelehnt! member_join = !source_name! <!source_address!> joins the waiting room and must be allowed to join the group. member_join-de = !source_name! <!source_address!> betritt den Warteraum und muss zur Gruppe zugelassen werden. -
data.cfg[main] auto_add_user = True auto_add_user_type = wait allow_user = True allow_user_type = user deny_user = True deny_user_type = block_wait
This guide applies to all admins. Here are briefly explained the administative possibilities.
An administartor has correspondingly higher permissions and more commands are available. In general, the permissions can be freely defined. All users/admins etc. can also generally have the same permissions.
The following functions can be adjusted accordingly by command.
/enable_local <true/false> = Local message routing
/enable_cluster <true/false> = Cluster message routing
/auto_add_user <true/false> = Add unknown user functionality
/auto_add_cluster <true/false> = Add unknown cluster functionality
/description <description> = Change description
/rules <description> = Change rules
/announce
/show or /list
/show or /list <admin/mod/user/guest>
/search <nickname/user_address>
Additional users can be invited, this can be done with the command /invite <user_address>.
Then the user gets a welcome message and enters the group.
If the waiting room is activated, the users can be administered with the following 2 commands.
/allow <user_address>
/deny <user_address>
The following commands can be used to administrate the users. Only in case of an invite a welcome message will be sent to the user. Users added here will not get a notification and have to start the first conversation with the group themselves. Or get a message sent directly.
/add <admin/mod/user/guest> <user_address> <user_name>
/del or /rm <admin/mod/user/guest> <user_address>
/del or /rm <user_address>
/move <admin/mod/user/guest> <user_address>
The following commands can be used to remove/enable the users.
/kick <user_address>
/block <user_address>
/unblock <user_address>
If an automatic save is set in the config nothing has to be done here. If not or additionally the data can be saved with the following command.
/save
To display the help and all available commands the following commands can be used. /help or /?
/help or /? = Shows this help
/leave or /part = Leave group
/name = Show current nickname
/nick = Show current nickname
/name <your nickname> = Change/Define nickname
/nick <your nickname> = Change/Define nickname
/address = Dislay address info
/info = Show group info
/description = Show current description
/rules = Show current rules
/version = Show version info
/groups or /cluster = Show all groups/clusters
/groups <name> = Searches for a group/cluster by name
/members or /names or /who = Show all group members
/admins = Show group admins
/moderators or /mods = Show group moderators
/users = Show group users
/guests = Show group guests
/search <nickname/user_address> = Searches for a user by nickname or address
/whois <nickname/user_address> = Searches for a user by nickname or address
/activitys = Show user activitys
/statistic or /stat = Show group statistic
/status = Show status
/delivery or /message = Show delivery status of last message
/enable_local <true/false> = Local message routing
/enable_cluster <true/false> = Cluster message routing
/auto_add_user <true/false> = Add unknown user functionality
/auto_add_user_type <admin/mod/user/guest>
/auto_add_cluster <true/false> = Add unknown cluster functionality
/invite_user <true/false> = Invite functionality
/invite_user_type <admin/mod/user/guest>
/description <description> = Change description
/rules <description> = Change rules
/announce = Send announce
/sync = Synchronize messages with propagation node
/show run = Show current configuration
/show or /list
/show or /list <admin/mod/user/guest>
/add <admin/mod/user/guest> <user_address> <user_name>
/del or /rm <admin/mod/user/guest> <user_address>
/del or /rm <user_address>
/move <admin/mod/user/guest> <user_address>
/invite <user_address> = Invites user to group
/kick <user_address> = Kicks user out of group
/block <user_address> = Block user
/ban <user_address> = Block user
/unblock <user_address> = Unblock user
/unban <user_address> = Unblock user
/load or /read = Read the configuration/data
/save or /wr = Saves the current configuration/data
This guide applies to users or admins. Here are briefly explained the normal possibilities of the software.
Just send a first message to the group address with Sideband/NomadNet. However, this is only possible if automatic joining of the group is activated.
Any normal text without / or @ at the beginning will be interpreted as a normal message and sent to all local members accordingly. There is nothing else to consider here.
It is possible to send messages to other groups which are part of the cluster. To do this you must first enter the command @ followed by the target name of the group and then the normal message text.
For example @Berlin Hello this is a test :). So this example would send this message to the Berlin group.
A group in a cluster can be arranged hierarchically in different levels. If the higher level is defined as the target, all groups below it receive this message.
For example, there are the following 3 groups Germany/Berlin and Germany/Hamburg and Germany/Munich. Accordingly, these can be written to directly or a higher level.
With the command @Germany all 3 groups are now accessible. With the command @Munich only this one group is accessible.
It is possible to pin local group messages permanently. This will then sent to all members. Additionally, all pinned messages can be displayed later.
This feature is useful to give new members access to important news from the past.
/pin = Display all pinned messages
/pin <message text> = Pin a new message
/unpin <#id> = Remove a pinned message
It is possible to pin cluster group messages permanently. This will then sent to all members. Additionally, all pinned messages can be displayed later.
This feature is useful to give new members access to important news from the past.
@Group /pin <message text> = Pin a new message
A simple text-message based user interface is integrated. Like you might know it from other chat programs. Every command must start with the delimiter /. Then followed by the command and any data. For example /name My new nick name.
If there is no / at the beginning this is a normal message and will be sent to the other members.
To display the help and all available commands the following commands can be used. /help or /?
The /leave command is used to leave the group. Afterwards, the group can be re-entered (if it is allowed).
If the admin has allowed additional users to be invited, this can be done with the command /invite <user_address>.
Then the user gets a welcome message and enters the group.
The own nickname is either assigned automatically via received announce (after joining the group) or can be changed via the following command.
/name <your new nnockname> For example /name Max Walker.
/help or /? = Shows this help
/leave or /part = Leave group
/name = Show current nickname
/nick = Show current nickname
/name <your nickname> = Change/Define nickname
/nick <your nickname> = Change/Define nickname
/address = Dislay address info
/info = Show group info
/description = Show current description
/rules = Show current rules
/version = Show version info
/groups or /cluster = Show all groups/clusters
/groups <name> = Searches for a group/cluster by name
/members or /names or /who = Show all group members
/admins = Show group admins
/moderators or /mods = Show group moderators
/users = Show group users
/guests = Show group guests
/search <nickname/user_address> = Searches for a user by nickname or address
/whois <nickname/user_address> = Searches for a user by nickname or address
/activitys = Show user activitys
/statistic or /stat = Show group statistic
/delivery or /message = Show delivery status of last message
/invite <user_address> = Invites user to group
At the time of the development of these group functions there is no other possibility to use groups via Sideband/Nomadnet. Therefore this software was developed as a workaround. This software also offers other functions than a normal group broadcast.
You should read the Installation manual section. There everything is explained briefly. Just work through everything from top to bottom :)