9.3ms - tactile - 6x6mm THD long leads universal-solder #70920

[adamfk]

Thanks for sharing your button/switch data with the community.

Please note:

• This issue is for a particular instance of a switch/button of the original poster. If someone else wants to test the same switch model, they should create a new issue.
• The original poster can add additional test sessions to this issue (if they wish) by adding a comment.

Switch Info

Property	Description
Type	tactile
Circuit	SPST
Function	Off-Mom (Normally Open)
Model info/markings	generic. SKU: 70920
Voltage & Current rating	unknown

Product URL: https://universal-solder.ca/product/tactile-push-button-6x6mm-long-leads/

How new is the switch? Brand new. Never used before.

How do you like the switch? It's great! I love that it fits in breadboards so nicely. Good feel and sound when pressed/released.

Photos

Marketing:

Test Session 1

Setup

Property	Description
Arduino model	Uno (SMD)
Pull-up resistor	Arduino internal (42.2k measured)
Switch wires connection	Breadboard.
Measure switch's ON resistance	0.4 ohms
Anything else connected?	Nope.

Test Setup Photos:
Please upload picture(s) of your test setup showing how the switch is connected to your Arduino. Please be wary of insecure wires/connections as they can cause many signal glitches.

Did wiggle test. No glitches. Brand new breadboard. Bent wires so that they wouldn't be touched when pressing the button.

Results

Test Section Details

Fast: I used a popsicle stick under my finger to give some very firm "tap/presses". Had no effect. All the bounces came from releases.

📄 Raw Data

universal-solder Tactile long leads.txt

You can graph/analyze the data here.

🖼️ Summary Image

🕵️ Your Observations (optional)

Button did quite well! All the bounces came from releases.