From 076463a18d656c5c4c5473b46f6e472f30a6667c Mon Sep 17 00:00:00 2001 From: Jonathan Velasco <39401808+jvela018@users.noreply.github.com> Date: Wed, 27 Nov 2024 16:01:38 +0200 Subject: [PATCH] DOCS: Correct variation_type data type in parametric setup documentation (#5483) --- src/ansys/aedt/core/modules/design_xploration.py | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/ansys/aedt/core/modules/design_xploration.py b/src/ansys/aedt/core/modules/design_xploration.py index 08da1a88f5a..125a05aedef 100644 --- a/src/ansys/aedt/core/modules/design_xploration.py +++ b/src/ansys/aedt/core/modules/design_xploration.py @@ -916,7 +916,7 @@ def add_variation( Variation Step or Count depending on variation_type. Default is `100`. units : str, optional Variation units. Default is `None`. - variation_type : float or int + variation_type : str, optional Variation Type. Admitted values are `"SingleValue", `"LinearCount"`, `"LinearStep"`, `"DecadeCount"`, `"OctaveCount"`, `"ExponentialCount"`. @@ -1159,7 +1159,7 @@ def add( Variation End Point. This parameter is optional if a Single Value is defined. step : float or int Variation Step or Count depending on variation_type. The default is ``100``. - variation_type : float or int + variation_type : str, optional Variation Type. Admitted values are `"LinearCount"`, `"LinearStep"`, `"LogScale"`, `"SingleValue"`. solution : str, optional Type of the solution. The default is ``None``, in which case the default