s905x4-generic

[edikurexe]

In kernel 6.x my device not booting

[devmfc]

You should change the line in the file.

[edikurexe]

I have changed it, I have also tried using the available dtb and the dtb that I usually use in openwrt, but it still won't boot.

[freezedi]

Have the same situation, tv box x96 max+ ultra s905x4. Cant find network card on load, i try all dtb with x4, s905x4.. but lan not started
dtb in attach not started with image

found working EmuELEC-Amlogic-ng.aarch64-4.6-TEST-07082022-Generic.img
sc2_s905x4_4g.zip
with sc2_s905x4_4g.dtb

EMUELEC:~ # ethtool eth0
Settings for eth0:
        Supported ports: [ AUI ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Supported pause frame use: No
        Supports auto-negotiation: No
        Supported FEC modes: Not reported
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Advertised pause frame use: No
        Advertised auto-negotiation: No
        Advertised FEC modes: Not reported
        Link partner advertised link modes:  10baseT/Half 10baseT/Full
                                             100baseT/Half 100baseT/Full
        Link partner advertised pause frame use: No
        Link partner advertised auto-negotiation: Yes
        Link partner advertised FEC modes: Not reported
        Speed: 100Mb/s
        Duplex: Full
        Port: MII
        PHYAD: 8
        Transceiver: external
        Auto-negotiation: on
        Supports Wake-on: ug
        Wake-on: d
        Current message level: 0x0000003f (63)
                               drv probe link timer ifdown ifup
        Link detected: yes

======================
EMULELEC
dmesg | grep net
[    0.572884@3]- audit: initializing netlink subsys (disabled)
[    0.581650@3]- SELinux:  Registering netfilter hooks
[    0.603685@3]- meson6-dwmac fdc00000.ethernet: no reset control found
[   58.171939@2]- meson6-dwmac fdc00000.ethernet eth0: fail to init PTP.
[   60.219438@2]d meson6-dwmac fdc00000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
=============
[   18.590373] meson8b-dwmac fdc00000.ethernet eth0: PHY [0.1:08] driver [Meson G12A Internal PHY]
[   21.213373] meson8b-dwmac fdc00000.ethernet eth0: configuring for phy/rmii link mode
[   21.334916] [RX]-up_phy_addr = 0

[devmfc]

I definitely think you are suffering from the same problem indeed.

[freezedi]

I definitely think you are suffering from the same problem indeed.

What do you think can help me? Or how can I help you to make the solution work? I can pull the original dtb from the andoid firmware. Will this help make the linux image work?