Remove "Is supported on this TFM" logic from marshalling generators and instead handle it during factory construction

src/libraries/System.Runtime.InteropServices.JavaScript/gen/JSImportGenerator/Marshaling/BaseJSGenerator.cs

@@ -22,7 +22,6 @@ protected BaseJSGenerator(MarshalerType marshalerType, IMarshallingGenerator inn
         }
 
         public ManagedTypeInfo AsNativeType(TypePositionInfo info) => _inner.AsNativeType(info);
-        public bool IsSupported(TargetFramework target, Version version) => _inner.IsSupported(target, version);
         public virtual bool UsesNativeIdentifier(TypePositionInfo info, StubCodeContext context) => _inner.UsesNativeIdentifier(info, context);
         public SignatureBehavior GetNativeSignatureBehavior(TypePositionInfo info) => _inner.GetNativeSignatureBehavior(info);
         public ValueBoundaryBehavior GetValueBoundaryBehavior(TypePositionInfo info, StubCodeContext context) => _inner.GetValueBoundaryBehavior(info, context);

src/libraries/System.Runtime.InteropServices.JavaScript/gen/JSImportGenerator/Marshaling/EmptyJSGenerator.cs

@@ -14,7 +14,6 @@ internal sealed class EmptyJSGenerator : IJSMarshallingGenerator
         public IEnumerable<ExpressionSyntax> GenerateBind(TypePositionInfo info, StubCodeContext context) => Array.Empty<ExpressionSyntax>();
         public SignatureBehavior GetNativeSignatureBehavior(TypePositionInfo info) => SignatureBehavior.ManagedTypeAndAttributes;
         public ValueBoundaryBehavior GetValueBoundaryBehavior(TypePositionInfo info, StubCodeContext context) => ValueBoundaryBehavior.ManagedIdentifier;
-        public bool IsSupported(TargetFramework target, Version version) => false;
         public ByValueMarshalKindSupport SupportsByValueMarshalKind(ByValueContentsMarshalKind marshalKind, TypePositionInfo info, StubCodeContext context, out GeneratorDiagnostic? diagnostic)
             => ByValueMarshalKindSupportDescriptor.Default.GetSupport(marshalKind, info, context, out diagnostic);
         public bool UsesNativeIdentifier(TypePositionInfo info, StubCodeContext context) => false;

src/libraries/System.Runtime.InteropServices/gen/ComInterfaceGenerator/Marshallers/ComInterfaceDispatchMarshallerFactory.cs

@@ -59,8 +59,6 @@ public IEnumerable<StatementSyntax> Generate(TypePositionInfo info, StubCodeCont
 
             public SignatureBehavior GetNativeSignatureBehavior(TypePositionInfo info) => SignatureBehavior.NativeType;
             public ValueBoundaryBehavior GetValueBoundaryBehavior(TypePositionInfo info, StubCodeContext context) => ValueBoundaryBehavior.NativeIdentifier;
-            public bool IsSupported(TargetFramework target, Version version)
-                => target == TargetFramework.Net && version >= new Version(5, 0);
             public ByValueMarshalKindSupport SupportsByValueMarshalKind(ByValueContentsMarshalKind marshalKind, TypePositionInfo info, StubCodeContext context, out GeneratorDiagnostic? diagnostic)
                 => ByValueMarshalKindSupportDescriptor.Default.GetSupport(marshalKind, info, context, out diagnostic);
             public bool UsesNativeIdentifier(TypePositionInfo info, StubCodeContext context) => true;

src/libraries/System.Runtime.InteropServices/gen/ComInterfaceGenerator/Marshallers/ManagedHResultExceptionMarshallerFactory.cs

@@ -68,7 +68,6 @@ public IEnumerable<StatementSyntax> Generate(TypePositionInfo info, StubCodeCont
 
             public SignatureBehavior GetNativeSignatureBehavior(TypePositionInfo info) => SignatureBehavior.NativeType;
             public ValueBoundaryBehavior GetValueBoundaryBehavior(TypePositionInfo info, StubCodeContext context) => ValueBoundaryBehavior.ManagedIdentifier;
-            public bool IsSupported(TargetFramework target, Version version) => true;
             public ByValueMarshalKindSupport SupportsByValueMarshalKind(ByValueContentsMarshalKind marshalKind, TypePositionInfo info, StubCodeContext context, out GeneratorDiagnostic? diagnostic)
                 => ByValueMarshalKindSupportDescriptor.Default.GetSupport(marshalKind, info, context, out diagnostic);
             public bool UsesNativeIdentifier(TypePositionInfo info, StubCodeContext context) => false;
@@ -106,7 +105,6 @@ public IEnumerable<StatementSyntax> Generate(TypePositionInfo info, StubCodeCont
 
             public SignatureBehavior GetNativeSignatureBehavior(TypePositionInfo info) => SignatureBehavior.NativeType;
             public ValueBoundaryBehavior GetValueBoundaryBehavior(TypePositionInfo info, StubCodeContext context) => ValueBoundaryBehavior.ManagedIdentifier;
-            public bool IsSupported(TargetFramework target, Version version) => true;
             public ByValueMarshalKindSupport SupportsByValueMarshalKind(ByValueContentsMarshalKind marshalKind, TypePositionInfo info, StubCodeContext context, out GeneratorDiagnostic? diagnostic)
                 => ByValueMarshalKindSupportDescriptor.Default.GetSupport(marshalKind, info, context, out diagnostic);
             public bool UsesNativeIdentifier(TypePositionInfo info, StubCodeContext context) => false;

src/libraries/System.Runtime.InteropServices/gen/ComInterfaceGenerator/Marshallers/ObjectUnwrapperMarshallerFactory.cs

@@ -54,7 +54,6 @@ public IEnumerable<StatementSyntax> Generate(TypePositionInfo info, StubCodeCont
 
             public SignatureBehavior GetNativeSignatureBehavior(TypePositionInfo info) => SignatureBehavior.NativeType;
             public ValueBoundaryBehavior GetValueBoundaryBehavior(TypePositionInfo info, StubCodeContext context) => ValueBoundaryBehavior.NativeIdentifier;
-            public bool IsSupported(TargetFramework target, Version version) => true;
             public ByValueMarshalKindSupport SupportsByValueMarshalKind(ByValueContentsMarshalKind marshalKind, TypePositionInfo info, StubCodeContext context, out GeneratorDiagnostic? diagnostic)
                 => ByValueMarshalKindSupportDescriptor.Default.GetSupport(marshalKind, info, context, out diagnostic);
             public bool UsesNativeIdentifier(TypePositionInfo info, StubCodeContext context) => true;

src/libraries/System.Runtime.InteropServices/gen/ComInterfaceGenerator/Marshallers/StructAsHResultMarshallerFactory.cs

@@ -98,8 +98,6 @@ public ValueBoundaryBehavior GetValueBoundaryBehavior(TypePositionInfo info, Stu
                 return ValueBoundaryBehavior.NativeIdentifier;
             }
 
-            public bool IsSupported(TargetFramework target, Version version) => target == TargetFramework.Net && version.Major >= 8;
-
             public ByValueMarshalKindSupport SupportsByValueMarshalKind(ByValueContentsMarshalKind marshalKind, TypePositionInfo info, StubCodeContext context, out GeneratorDiagnostic? diagnostic)
                 => ByValueMarshalKindSupportDescriptor.Default.GetSupport(marshalKind, info, context, out diagnostic);
 

src/libraries/System.Runtime.InteropServices/gen/Common/Resources/Strings.resx

@@ -1,17 +1,17 @@
 <?xml version="1.0" encoding="utf-8"?>
 <root>
-  <!-- 
-    Microsoft ResX Schema 
-    
+  <!--
+    Microsoft ResX Schema
+
     Version 2.0
-    
-    The primary goals of this format is to allow a simple XML format 
-    that is mostly human readable. The generation and parsing of the 
-    various data types are done through the TypeConverter classes 
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
     associated with the data types.
-    
+
     Example:
-    
+
     ... ado.net/XML headers & schema ...
     <resheader name="resmimetype">text/microsoft-resx</resheader>
     <resheader name="version">2.0</resheader>
@@ -26,36 +26,36 @@
         <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
         <comment>This is a comment</comment>
     </data>
-                
-    There are any number of "resheader" rows that contain simple 
+
+    There are any number of "resheader" rows that contain simple
     name/value pairs.
-    
-    Each data row contains a name, and value. The row also contains a 
-    type or mimetype. Type corresponds to a .NET class that support 
-    text/value conversion through the TypeConverter architecture. 
-    Classes that don't support this are serialized and stored with the 
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
     mimetype set.
-    
-    The mimetype is used for serialized objects, and tells the 
-    ResXResourceReader how to depersist the object. This is currently not 
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
     extensible. For a given mimetype the value must be set accordingly:
-    
-    Note - application/x-microsoft.net.object.binary.base64 is the format 
-    that the ResXResourceWriter will generate, however the reader can 
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
     read any of the formats listed below.
-    
+
     mimetype: application/x-microsoft.net.object.binary.base64
-    value   : The object must be serialized with 
+    value   : The object must be serialized with
             : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
             : and then encoded with base64 encoding.
-    
+
     mimetype: application/x-microsoft.net.object.soap.base64
-    value   : The object must be serialized with 
+    value   : The object must be serialized with
             : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
             : and then encoded with base64 encoding.
 
     mimetype: application/x-microsoft.net.object.bytearray.base64
-    value   : The object must be serialized into a byte array 
+    value   : The object must be serialized into a byte array
             : using a System.ComponentModel.TypeConverter
             : and then encoded with base64 encoding.
     -->
@@ -144,9 +144,6 @@
   <data name="MarshallingStringOrCharAsUndefinedNotSupported" xml:space="preserve">
     <value>Marshalling string or char without explicit marshalling information is not supported. Specify '{0}.StringMarshalling', '{0}.StringMarshallingCustomType', 'MarshalUsingAttribute' or 'MarshalAsAttribute'.</value>
   </data>
-  <data name="SafeHandleByRefMustBeConcrete" xml:space="preserve">
-    <value>An abstract type derived from 'SafeHandle' cannot be marshalled by reference. The provided type must be concrete.</value>
-  </data>
   <data name="CyclicalCountInfo" xml:space="preserve">
     <value>This element cannot depend on '{0}' for collection size information without creating a dependency cycle</value>
   </data>

src/libraries/System.Runtime.InteropServices/gen/Common/Resources/xlf/Strings.cs.xlf

@@ -1022,11 +1022,6 @@
         <target state="translated">Aby se povolilo zařazování tohoto typu, musí se v tomto projektu zakázat zařazování modulu runtime použitím atributu System.Runtime.CompilerServices.DisableRuntimeMarshallingAttribute u sestavení.</target>
         <note />
       </trans-unit>
-      <trans-unit id="SafeHandleByRefMustBeConcrete">
-        <source>An abstract type derived from 'SafeHandle' cannot be marshalled by reference. The provided type must be concrete.</source>
-        <target state="translated">Abstraktní typ odvozený ze SafeHandle nelze zařadit pomocí odkazu. Poskytnutý typ musí být konkrétní.</target>
-        <note />
-      </trans-unit>
       <trans-unit id="SizeOfCollectionMustBeKnownAtMarshalTimeMessageOutParam">
         <source>The size of parameter '{0}' that is marshalled to the callee must be defined when the method is called, but count parameter '{1}' is an 'out' parameter.</source>
         <target state="translated">Při volání metody musí být definována velikost parametru{0}, která je zařazena do volané metody, ale parametr count {1} je parametr out.</target>

src/libraries/System.Runtime.InteropServices/gen/Common/Resources/xlf/Strings.de.xlf

@@ -1022,11 +1022,6 @@
         <target state="translated">Das Runtime-Marshalling muss in diesem Projekt deaktiviert werden, indem „System.Runtime.CompilerServices.DisableRuntimeMarshallingAttribute“ auf die Assembly angewendet wird, um das Marshalling dieses Typs zu ermöglichen.</target>
         <note />
       </trans-unit>
-      <trans-unit id="SafeHandleByRefMustBeConcrete">
-        <source>An abstract type derived from 'SafeHandle' cannot be marshalled by reference. The provided type must be concrete.</source>
-        <target state="translated">Ein abstrakter Typ, der von \"SafeHandle\" abgeleitet wird, kann nicht als Verweis gemarshallt werden. Der angegebene Typ muss ein konkretes Element sein.</target>
-        <note />
-      </trans-unit>
       <trans-unit id="SizeOfCollectionMustBeKnownAtMarshalTimeMessageOutParam">
         <source>The size of parameter '{0}' that is marshalled to the callee must be defined when the method is called, but count parameter '{1}' is an 'out' parameter.</source>
         <target state="translated">Die Größe des Parameters "{0}", der an den Aufgerufenen gemarshallt wird, muss definiert werden, wenn die Methode aufgerufen wird. Der Count-Parameter "{1}" ist jedoch ein "Out"-Parameter.</target>

src/libraries/System.Runtime.InteropServices/gen/Common/Resources/xlf/Strings.es.xlf

@@ -1022,11 +1022,6 @@
         <target state="translated">La serialización en tiempo de ejecución debe deshabilitarse en este proyecto aplicando \"System.Runtime.CompilerServices.DisableRuntimeMars contosoingAttribute\" al ensamblado para habilitar la serialización de este tipo.</target>
         <note />
       </trans-unit>
-      <trans-unit id="SafeHandleByRefMustBeConcrete">
-        <source>An abstract type derived from 'SafeHandle' cannot be marshalled by reference. The provided type must be concrete.</source>
-        <target state="translated">Un tipo abstracto derivado de “SafeHandle” no se puede serializar por referencia. El tipo proporcionado debe ser concreto.</target>
-        <note />
-      </trans-unit>
       <trans-unit id="SizeOfCollectionMustBeKnownAtMarshalTimeMessageOutParam">
         <source>The size of parameter '{0}' that is marshalled to the callee must be defined when the method is called, but count parameter '{1}' is an 'out' parameter.</source>
         <target state="translated">El tamaño del parámetro "{0}" que se serializa al destinatario debe definirse cuando se llama al método, pero el parámetro de recuento "{1}" es un parámetro "out".</target>

src/libraries/System.Runtime.InteropServices/gen/Common/Resources/xlf/Strings.fr.xlf

@@ -1022,11 +1022,6 @@
         <target state="translated">Le marshaling du runtime doit être désactivé dans ce projet en appliquant « System.Runtime.CompilerServices.DisableRuntimeMarshallingAttribute » à l’assembly pour activer le marshaling de ce type.</target>
         <note />
       </trans-unit>
-      <trans-unit id="SafeHandleByRefMustBeConcrete">
-        <source>An abstract type derived from 'SafeHandle' cannot be marshalled by reference. The provided type must be concrete.</source>
-        <target state="translated">Un type abstrait dérivé de « SafeHandle » ne peut pas être marshalé par référence. Le type fourni doit être concret.</target>
-        <note />
-      </trans-unit>
       <trans-unit id="SizeOfCollectionMustBeKnownAtMarshalTimeMessageOutParam">
         <source>The size of parameter '{0}' that is marshalled to the callee must be defined when the method is called, but count parameter '{1}' is an 'out' parameter.</source>
         <target state="translated">La taille du paramètre '{0}' qui est marshalé à l'appelé doit être définie lorsque la méthode est appelée, mais le paramètre count '{1}' est un paramètre 'out'.</target>

src/libraries/System.Runtime.InteropServices/gen/Common/Resources/xlf/Strings.it.xlf

@@ -1022,11 +1022,6 @@
         <target state="translated">Il marshalling di runtime in questo progetto deve essere disabilitato applicando 'System.Runtime.CompilerServices.DisableRuntimeMarshallingAttribute' all'assembly per abilitare il marshalling di questo tipo.</target>
         <note />
       </trans-unit>
-      <trans-unit id="SafeHandleByRefMustBeConcrete">
-        <source>An abstract type derived from 'SafeHandle' cannot be marshalled by reference. The provided type must be concrete.</source>
-        <target state="translated">Non è possibile effettuare il marshalling per riferimento di un tipo astratto derivato da 'SafeHandle'. Il tipo specificato deve essere concreto.</target>
-        <note />
-      </trans-unit>
       <trans-unit id="SizeOfCollectionMustBeKnownAtMarshalTimeMessageOutParam">
         <source>The size of parameter '{0}' that is marshalled to the callee must be defined when the method is called, but count parameter '{1}' is an 'out' parameter.</source>
         <target state="translated">Le dimensioni del parametro '{0}' di cui viene eseguito il marshalling al destinatario della chiamata devono essere definite quando viene chiamato il metodo, ma il parametro conteggio '{1}' è un parametro 'out'.</target>

src/libraries/System.Runtime.InteropServices/gen/Common/Resources/xlf/Strings.ja.xlf

@@ -1022,11 +1022,6 @@
         <target state="translated">このプロジェクトでは、アセンブリに 'System.Runtime.CompilerServices.DisableRuntimeMarshallingAttribute' を適用してランタイム マーシャリングを無効にし、この型のマーシャリングを有効にする必要があります。</target>
         <note />
       </trans-unit>
-      <trans-unit id="SafeHandleByRefMustBeConcrete">
-        <source>An abstract type derived from 'SafeHandle' cannot be marshalled by reference. The provided type must be concrete.</source>
-        <target state="translated">'SafeHandle' から派生した抽象型は、参照でマーシャリングできません。指定される型は具象型である必要があります。</target>
-        <note />
-      </trans-unit>
       <trans-unit id="SizeOfCollectionMustBeKnownAtMarshalTimeMessageOutParam">
         <source>The size of parameter '{0}' that is marshalled to the callee must be defined when the method is called, but count parameter '{1}' is an 'out' parameter.</source>
         <target state="translated">呼び出し先にマーシャリングされるパラメーター '{0}' のサイズは、メソッドが呼び出されたときに定義する必要がありますが、count パラメーター '{1}' は 'out' パラメーターです。</target>

src/libraries/System.Runtime.InteropServices/gen/Common/Resources/xlf/Strings.ko.xlf

@@ -1022,11 +1022,6 @@
         <target state="translated">이 형식의 마샬링을 활성화하려면 어셈블리에 'System.Runtime.CompilerServices.DisableRuntimeMarshallingAttribute'를 적용하여 이 프로젝트에서 런타임 마샬링을 비활성화해야 합니다.</target>
         <note />
       </trans-unit>
-      <trans-unit id="SafeHandleByRefMustBeConcrete">
-        <source>An abstract type derived from 'SafeHandle' cannot be marshalled by reference. The provided type must be concrete.</source>
-        <target state="translated">'SafeHandle'에서 파생된 추상 형식은 참조로 마샬링할 수 없습니다. 제공된 형식은 구체적이어야 합니다.</target>
-        <note />
-      </trans-unit>
       <trans-unit id="SizeOfCollectionMustBeKnownAtMarshalTimeMessageOutParam">
         <source>The size of parameter '{0}' that is marshalled to the callee must be defined when the method is called, but count parameter '{1}' is an 'out' parameter.</source>
         <target state="translated">메서드를 호출할 때 호출 수신자로 마샬링되는 매개 변수 '{0}'의 크기를 정의해야 하지만 count 매개 변수 '{1}'은(는) 'out' 매개 변수입니다.</target>

src/libraries/System.Runtime.InteropServices/gen/Common/Resources/xlf/Strings.pl.xlf

@@ -1022,11 +1022,6 @@
         <target state="translated">Marshalling środowiska uruchomieniowego musi być wyłączony w tym projekcie przez zastosowanie do zestawu atrybutu „System.Runtime.InteropServices.DisableRuntimeMarshallingAttribute”, aby umożliwić marshalling tego typu.</target>
         <note />
       </trans-unit>
-      <trans-unit id="SafeHandleByRefMustBeConcrete">
-        <source>An abstract type derived from 'SafeHandle' cannot be marshalled by reference. The provided type must be concrete.</source>
-        <target state="translated">Typ abstrakcyjny pochodzący od elementu „SafeHandle” nie może być skierowany przez odwołanie. Podany typ musi być konkretny.</target>
-        <note />
-      </trans-unit>
       <trans-unit id="SizeOfCollectionMustBeKnownAtMarshalTimeMessageOutParam">
         <source>The size of parameter '{0}' that is marshalled to the callee must be defined when the method is called, but count parameter '{1}' is an 'out' parameter.</source>
         <target state="translated">Rozmiar parametru „{0}”, który jest kierowany do obiektu wywołującego, musi być zdefiniowany podczas wywoływania metody, ale parametr ILE.LICZB „{1}” jest parametrem „out”.</target>