system.tcl

################################################################
# This is a generated script based on design: system
#
# Though there are limitations about the generated script,
# the main purpose of this utility is to make learning
# IP Integrator Tcl commands easier.
################################################################

namespace eval _tcl {
proc get_script_folder {} {
   set script_path [file normalize [info script]]
   set script_folder [file dirname $script_path]
   return $script_folder
}
}
variable script_folder
set script_folder [_tcl::get_script_folder]

################################################################
# Check if script is running in correct Vivado version.
################################################################
# DISABLED: this design seems to work in 2017.2 as well as 2017.3
#set scripts_vivado_version 2017.3
#set current_vivado_version [version -short]

#if { [string first $scripts_vivado_version $current_vivado_version] == -1 } {
#   puts ""
#   catch {common::send_msg_id "BD_TCL-109" "ERROR" "This script was generated using Vivado <$scripts_vivado_version> and is being run in <$current_vivado_version> of Vivado. Please run the script in Vivado <$scripts_vivado_version> then open the design in Vivado <$current_vivado_version>. Upgrade the design by running \"Tools => Report => Report IP Status...\", then run write_bd_tcl to create an updated script."}
#
#   return 1
#}

################################################################
# START
################################################################

# To test this script, run the following commands from Vivado Tcl console:
# source system_script.tcl

# If there is no project opened, this script will create a
# project, but make sure you do not have an existing project
# <./myproj/project_1.xpr> in the current working folder.

set list_projs [get_projects -quiet]
if { $list_projs eq "" } {
   create_project ekiwi ekiwi -part xc7z020clg400-1
   set_property BOARD_PART digilentinc.com:arty-z7-20:part0:1.0 [current_project]
}

set_property  ip_repo_paths  chisel/ip [current_project]
update_ip_catalog

# CHANGE DESIGN NAME HERE
set design_name system

# If you do not already have an existing IP Integrator design open,
# you can create a design using the following command:
#    create_bd_design $design_name

# Creating design if needed
set errMsg ""
set nRet 0

set cur_design [current_bd_design -quiet]
set list_cells [get_bd_cells -quiet]

if { ${design_name} eq "" } {
   # USE CASES:
   #    1) Design_name not set

   set errMsg "Please set the variable <design_name> to a non-empty value."
   set nRet 1

} elseif { ${cur_design} ne "" && ${list_cells} eq "" } {
   # USE CASES:
   #    2): Current design opened AND is empty AND names same.
   #    3): Current design opened AND is empty AND names diff; design_name NOT in project.
   #    4): Current design opened AND is empty AND names diff; design_name exists in project.

   if { $cur_design ne $design_name } {
      common::send_msg_id "BD_TCL-001" "INFO" "Changing value of <design_name> from <$design_name> to <$cur_design> since current design is empty."
      set design_name [get_property NAME $cur_design]
   }
   common::send_msg_id "BD_TCL-002" "INFO" "Constructing design in IPI design <$cur_design>..."

} elseif { ${cur_design} ne "" && $list_cells ne "" && $cur_design eq $design_name } {
   # USE CASES:
   #    5) Current design opened AND has components AND same names.

   set errMsg "Design <$design_name> already exists in your project, please set the variable <design_name> to another value."
   set nRet 1
} elseif { [get_files -quiet ${design_name}.bd] ne "" } {
   # USE CASES: 
   #    6) Current opened design, has components, but diff names, design_name exists in project.
   #    7) No opened design, design_name exists in project.

   set errMsg "Design <$design_name> already exists in your project, please set the variable <design_name> to another value."
   set nRet 2

} else {
   # USE CASES:
   #    8) No opened design, design_name not in project.
   #    9) Current opened design, has components, but diff names, design_name not in project.

   common::send_msg_id "BD_TCL-003" "INFO" "Currently there is no design <$design_name> in project, so creating one..."

   create_bd_design $design_name

   common::send_msg_id "BD_TCL-004" "INFO" "Making design <$design_name> as current_bd_design."
   current_bd_design $design_name

}

common::send_msg_id "BD_TCL-005" "INFO" "Currently the variable <design_name> is equal to \"$design_name\"."

if { $nRet != 0 } {
   catch {common::send_msg_id "BD_TCL-114" "ERROR" $errMsg}
   return $nRet
}

##################################################################
# DESIGN PROCs
##################################################################



# Procedure to create entire design; Provide argument to make
# procedure reusable. If parentCell is "", will use root.
proc create_root_design { parentCell } {

  variable script_folder

  if { $parentCell eq "" } {
     set parentCell [get_bd_cells /]
  }

  # Get object for parentCell
  set parentObj [get_bd_cells $parentCell]
  if { $parentObj == "" } {
     catch {common::send_msg_id "BD_TCL-100" "ERROR" "Unable to find parent cell <$parentCell>!"}
     return
  }

  # Make sure parentObj is hier blk
  set parentType [get_property TYPE $parentObj]
  if { $parentType ne "hier" } {
     catch {common::send_msg_id "BD_TCL-101" "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
     return
  }

  # Save current instance; Restore later
  set oldCurInst [current_bd_instance .]

  # Set parent object as current
  current_bd_instance $parentObj


  # Create interface ports
  set DDR [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:ddrx_rtl:1.0 DDR ]
  set FIXED_IO [ create_bd_intf_port -mode Master -vlnv xilinx.com:display_processing_system7:fixedio_rtl:1.0 FIXED_IO ]
  set btns_4bits [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:gpio_rtl:1.0 btns_4bits ]
  set leds_4bits [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:gpio_rtl:1.0 leds_4bits ]
  set rgb_led [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:gpio_rtl:1.0 rgb_led ]
  set sws_2bits [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:gpio_rtl:1.0 sws_2bits ]

  # Create ports

  # Create instance: AxiLiteLoopBack_0, and set properties
  set AxiLiteLoopBack_0 [ create_bd_cell -type ip -vlnv user.org:user:AxiLiteLoopBack:1.0 AxiLiteLoopBack_0 ]

  set_property -dict [ list \
CONFIG.NUM_READ_OUTSTANDING {1} \
CONFIG.NUM_WRITE_OUTSTANDING {1} \
 ] [get_bd_intf_pins /AxiLiteLoopBack_0/io]

  # Create instance: AxiLiteReadDifferentConstants_0, and set properties
  set AxiLiteReadDifferentConstants_0 [ create_bd_cell -type ip -vlnv user.org:user:AxiLiteReadDifferentConstants:1.0 AxiLiteReadDifferentConstants_0 ]

  set_property -dict [ list \
CONFIG.NUM_READ_OUTSTANDING {1} \
CONFIG.NUM_WRITE_OUTSTANDING {1} \
 ] [get_bd_intf_pins /AxiLiteReadDifferentConstants_0/io]

  # Create instance: AxiLiteReadOneConstant_0, and set properties
  set AxiLiteReadOneConstant_0 [ create_bd_cell -type ip -vlnv user.org:user:AxiLiteReadOneConstant:1.0 AxiLiteReadOneConstant_0 ]

  # Create instance: AxisQueue_0, and set properties
  set AxisQueue_0 [ create_bd_cell -type ip -vlnv ekiwi:pynq:AxisQueue:1.0 AxisQueue_0 ]

  # Create instance: axi_dma_0, and set properties
  set axi_dma_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_dma:7.1 axi_dma_0 ]
  set_property -dict [ list \
CONFIG.c_include_sg {0} \
CONFIG.c_m_axi_mm2s_data_width {64} \
CONFIG.c_m_axi_s2mm_data_width {64} \
CONFIG.c_m_axis_mm2s_tdata_width {64} \
CONFIG.c_mm2s_burst_size {64} \
CONFIG.c_s2mm_burst_size {64} \
CONFIG.c_sg_include_stscntrl_strm {0} \
CONFIG.c_sg_length_width {23} \
 ] $axi_dma_0

  # Create instance: axi_mem_intercon, and set properties
  set axi_mem_intercon [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_interconnect:2.1 axi_mem_intercon ]
  set_property -dict [ list \
CONFIG.NUM_MI {1} \
CONFIG.NUM_SI {2} \
 ] $axi_mem_intercon

  # Create instance: btns_gpio, and set properties
  set btns_gpio [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_gpio:2.0 btns_gpio ]
  set_property -dict [ list \
CONFIG.C_ALL_INPUTS {1} \
CONFIG.C_GPIO_WIDTH {4} \
CONFIG.C_INTERRUPT_PRESENT {1} \
CONFIG.GPIO_BOARD_INTERFACE {btns_4bits} \
CONFIG.USE_BOARD_FLOW {true} \
 ] $btns_gpio

  # Create instance: inv, and set properties
  set inv [ create_bd_cell -type ip -vlnv xilinx.com:ip:util_vector_logic:2.0 inv ]
  set_property -dict [ list \
CONFIG.C_OPERATION {not} \
CONFIG.C_SIZE {1} \
CONFIG.LOGO_FILE {data/sym_notgate.png} \
 ] $inv

  # Create instance: processing_system7_0, and set properties
  set processing_system7_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:processing_system7:5.5 processing_system7_0 ]
  set_property -dict [ list \
CONFIG.PCW_ACT_APU_PERIPHERAL_FREQMHZ {650.000000} \
CONFIG.PCW_ACT_CAN0_PERIPHERAL_FREQMHZ {23.8095} \
CONFIG.PCW_ACT_CAN1_PERIPHERAL_FREQMHZ {23.8095} \
CONFIG.PCW_ACT_CAN_PERIPHERAL_FREQMHZ {10.000000} \
CONFIG.PCW_ACT_DCI_PERIPHERAL_FREQMHZ {10.096154} \
CONFIG.PCW_ACT_ENET0_PERIPHERAL_FREQMHZ {125.000000} \
CONFIG.PCW_ACT_ENET1_PERIPHERAL_FREQMHZ {10.000000} \
CONFIG.PCW_ACT_FPGA0_PERIPHERAL_FREQMHZ {100.000000} \
CONFIG.PCW_ACT_FPGA1_PERIPHERAL_FREQMHZ {10.000000} \
CONFIG.PCW_ACT_FPGA2_PERIPHERAL_FREQMHZ {10.000000} \
CONFIG.PCW_ACT_FPGA3_PERIPHERAL_FREQMHZ {10.000000} \
CONFIG.PCW_ACT_I2C_PERIPHERAL_FREQMHZ {50} \
CONFIG.PCW_ACT_PCAP_PERIPHERAL_FREQMHZ {200.000000} \
CONFIG.PCW_ACT_QSPI_PERIPHERAL_FREQMHZ {200.000000} \
CONFIG.PCW_ACT_SDIO_PERIPHERAL_FREQMHZ {50.000000} \
CONFIG.PCW_ACT_SMC_PERIPHERAL_FREQMHZ {10.000000} \
CONFIG.PCW_ACT_SPI_PERIPHERAL_FREQMHZ {10.000000} \
CONFIG.PCW_ACT_TPIU_PERIPHERAL_FREQMHZ {200.000000} \
CONFIG.PCW_ACT_TTC0_CLK0_PERIPHERAL_FREQMHZ {108.333336} \
CONFIG.PCW_ACT_TTC0_CLK1_PERIPHERAL_FREQMHZ {108.333336} \
CONFIG.PCW_ACT_TTC0_CLK2_PERIPHERAL_FREQMHZ {108.333336} \
CONFIG.PCW_ACT_TTC1_CLK0_PERIPHERAL_FREQMHZ {108.333336} \
CONFIG.PCW_ACT_TTC1_CLK1_PERIPHERAL_FREQMHZ {108.333336} \
CONFIG.PCW_ACT_TTC1_CLK2_PERIPHERAL_FREQMHZ {108.333336} \
CONFIG.PCW_ACT_TTC_PERIPHERAL_FREQMHZ {50} \
CONFIG.PCW_ACT_UART_PERIPHERAL_FREQMHZ {100.000000} \
CONFIG.PCW_ACT_USB0_PERIPHERAL_FREQMHZ {60} \
CONFIG.PCW_ACT_USB1_PERIPHERAL_FREQMHZ {60} \
CONFIG.PCW_ACT_WDT_PERIPHERAL_FREQMHZ {108.333336} \
CONFIG.PCW_APU_CLK_RATIO_ENABLE {6:2:1} \
CONFIG.PCW_APU_PERIPHERAL_FREQMHZ {650} \
CONFIG.PCW_ARMPLL_CTRL_FBDIV {26} \
CONFIG.PCW_CAN0_BASEADDR {0xE0008000} \
CONFIG.PCW_CAN0_CAN0_IO {<Select>} \
CONFIG.PCW_CAN0_GRP_CLK_ENABLE {0} \
CONFIG.PCW_CAN0_GRP_CLK_IO {<Select>} \
CONFIG.PCW_CAN0_HIGHADDR {0xE0008FFF} \
CONFIG.PCW_CAN0_PERIPHERAL_CLKSRC {External} \
CONFIG.PCW_CAN0_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_CAN0_PERIPHERAL_FREQMHZ {-1} \
CONFIG.PCW_CAN1_BASEADDR {0xE0009000} \
CONFIG.PCW_CAN1_CAN1_IO {<Select>} \
CONFIG.PCW_CAN1_GRP_CLK_ENABLE {0} \
CONFIG.PCW_CAN1_GRP_CLK_IO {<Select>} \
CONFIG.PCW_CAN1_HIGHADDR {0xE0009FFF} \
CONFIG.PCW_CAN1_PERIPHERAL_CLKSRC {External} \
CONFIG.PCW_CAN1_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_CAN1_PERIPHERAL_FREQMHZ {-1} \
CONFIG.PCW_CAN_PERIPHERAL_CLKSRC {IO PLL} \
CONFIG.PCW_CAN_PERIPHERAL_DIVISOR0 {1} \
CONFIG.PCW_CAN_PERIPHERAL_DIVISOR1 {1} \
CONFIG.PCW_CAN_PERIPHERAL_FREQMHZ {100} \
CONFIG.PCW_CAN_PERIPHERAL_VALID {0} \
CONFIG.PCW_CLK0_FREQ {100000000} \
CONFIG.PCW_CLK1_FREQ {10000000} \
CONFIG.PCW_CLK2_FREQ {10000000} \
CONFIG.PCW_CLK3_FREQ {10000000} \
CONFIG.PCW_CORE0_FIQ_INTR {0} \
CONFIG.PCW_CORE0_IRQ_INTR {0} \
CONFIG.PCW_CORE1_FIQ_INTR {0} \
CONFIG.PCW_CORE1_IRQ_INTR {0} \
CONFIG.PCW_CPU_CPU_6X4X_MAX_RANGE {667} \
CONFIG.PCW_CPU_CPU_PLL_FREQMHZ {1300.000} \
CONFIG.PCW_CPU_PERIPHERAL_CLKSRC {ARM PLL} \
CONFIG.PCW_CPU_PERIPHERAL_DIVISOR0 {2} \
CONFIG.PCW_CRYSTAL_PERIPHERAL_FREQMHZ {50} \
CONFIG.PCW_DCI_PERIPHERAL_CLKSRC {DDR PLL} \
CONFIG.PCW_DCI_PERIPHERAL_DIVISOR0 {52} \
CONFIG.PCW_DCI_PERIPHERAL_DIVISOR1 {2} \
CONFIG.PCW_DCI_PERIPHERAL_FREQMHZ {10.159} \
CONFIG.PCW_DDRPLL_CTRL_FBDIV {21} \
CONFIG.PCW_DDR_DDR_PLL_FREQMHZ {1050.000} \
CONFIG.PCW_DDR_HPRLPR_QUEUE_PARTITION {HPR(0)/LPR(32)} \
CONFIG.PCW_DDR_HPR_TO_CRITICAL_PRIORITY_LEVEL {15} \
CONFIG.PCW_DDR_LPR_TO_CRITICAL_PRIORITY_LEVEL {2} \
CONFIG.PCW_DDR_PERIPHERAL_CLKSRC {DDR PLL} \
CONFIG.PCW_DDR_PERIPHERAL_DIVISOR0 {2} \
CONFIG.PCW_DDR_PORT0_HPR_ENABLE {0} \
CONFIG.PCW_DDR_PORT1_HPR_ENABLE {0} \
CONFIG.PCW_DDR_PORT2_HPR_ENABLE {0} \
CONFIG.PCW_DDR_PORT3_HPR_ENABLE {0} \
CONFIG.PCW_DDR_PRIORITY_READPORT_0 {<Select>} \
CONFIG.PCW_DDR_PRIORITY_READPORT_1 {<Select>} \
CONFIG.PCW_DDR_PRIORITY_READPORT_2 {<Select>} \
CONFIG.PCW_DDR_PRIORITY_READPORT_3 {<Select>} \
CONFIG.PCW_DDR_PRIORITY_WRITEPORT_0 {<Select>} \
CONFIG.PCW_DDR_PRIORITY_WRITEPORT_1 {<Select>} \
CONFIG.PCW_DDR_PRIORITY_WRITEPORT_2 {<Select>} \
CONFIG.PCW_DDR_PRIORITY_WRITEPORT_3 {<Select>} \
CONFIG.PCW_DDR_RAM_BASEADDR {0x00100000} \
CONFIG.PCW_DDR_RAM_HIGHADDR {0x1FFFFFFF} \
CONFIG.PCW_DDR_WRITE_TO_CRITICAL_PRIORITY_LEVEL {2} \
CONFIG.PCW_DM_WIDTH {4} \
CONFIG.PCW_DQS_WIDTH {4} \
CONFIG.PCW_DQ_WIDTH {32} \
CONFIG.PCW_ENET0_BASEADDR {0xE000B000} \
CONFIG.PCW_ENET0_ENET0_IO {MIO 16 .. 27} \
CONFIG.PCW_ENET0_GRP_MDIO_ENABLE {1} \
CONFIG.PCW_ENET0_GRP_MDIO_IO {MIO 52 .. 53} \
CONFIG.PCW_ENET0_HIGHADDR {0xE000BFFF} \
CONFIG.PCW_ENET0_PERIPHERAL_CLKSRC {IO PLL} \
CONFIG.PCW_ENET0_PERIPHERAL_DIVISOR0 {8} \
CONFIG.PCW_ENET0_PERIPHERAL_DIVISOR1 {1} \
CONFIG.PCW_ENET0_PERIPHERAL_ENABLE {1} \
CONFIG.PCW_ENET0_PERIPHERAL_FREQMHZ {1000 Mbps} \
CONFIG.PCW_ENET0_RESET_ENABLE {0} \
CONFIG.PCW_ENET0_RESET_IO {<Select>} \
CONFIG.PCW_ENET1_BASEADDR {0xE000C000} \
CONFIG.PCW_ENET1_ENET1_IO {<Select>} \
CONFIG.PCW_ENET1_GRP_MDIO_ENABLE {0} \
CONFIG.PCW_ENET1_GRP_MDIO_IO {<Select>} \
CONFIG.PCW_ENET1_HIGHADDR {0xE000CFFF} \
CONFIG.PCW_ENET1_PERIPHERAL_CLKSRC {IO PLL} \
CONFIG.PCW_ENET1_PERIPHERAL_DIVISOR0 {1} \
CONFIG.PCW_ENET1_PERIPHERAL_DIVISOR1 {1} \
CONFIG.PCW_ENET1_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_ENET1_PERIPHERAL_FREQMHZ {1000 Mbps} \
CONFIG.PCW_ENET1_RESET_ENABLE {0} \
CONFIG.PCW_ENET1_RESET_IO {<Select>} \
CONFIG.PCW_ENET_RESET_ENABLE {0} \
CONFIG.PCW_ENET_RESET_POLARITY {Active Low} \
CONFIG.PCW_ENET_RESET_SELECT {<Select>} \
CONFIG.PCW_EN_4K_TIMER {0} \
CONFIG.PCW_EN_CAN0 {0} \
CONFIG.PCW_EN_CAN1 {0} \
CONFIG.PCW_EN_CLK0_PORT {1} \
CONFIG.PCW_EN_CLK1_PORT {0} \
CONFIG.PCW_EN_CLK2_PORT {0} \
CONFIG.PCW_EN_CLK3_PORT {0} \
CONFIG.PCW_EN_CLKTRIG0_PORT {0} \
CONFIG.PCW_EN_CLKTRIG1_PORT {0} \
CONFIG.PCW_EN_CLKTRIG2_PORT {0} \
CONFIG.PCW_EN_CLKTRIG3_PORT {0} \
CONFIG.PCW_EN_DDR {1} \
CONFIG.PCW_EN_EMIO_CAN0 {0} \
CONFIG.PCW_EN_EMIO_CAN1 {0} \
CONFIG.PCW_EN_EMIO_CD_SDIO0 {0} \
CONFIG.PCW_EN_EMIO_CD_SDIO1 {0} \
CONFIG.PCW_EN_EMIO_ENET0 {0} \
CONFIG.PCW_EN_EMIO_ENET1 {0} \
CONFIG.PCW_EN_EMIO_GPIO {0} \
CONFIG.PCW_EN_EMIO_I2C0 {0} \
CONFIG.PCW_EN_EMIO_I2C1 {0} \
CONFIG.PCW_EN_EMIO_MODEM_UART0 {0} \
CONFIG.PCW_EN_EMIO_MODEM_UART1 {0} \
CONFIG.PCW_EN_EMIO_PJTAG {0} \
CONFIG.PCW_EN_EMIO_SDIO0 {0} \
CONFIG.PCW_EN_EMIO_SDIO1 {0} \
CONFIG.PCW_EN_EMIO_SPI0 {0} \
CONFIG.PCW_EN_EMIO_SPI1 {0} \
CONFIG.PCW_EN_EMIO_SRAM_INT {0} \
CONFIG.PCW_EN_EMIO_TRACE {0} \
CONFIG.PCW_EN_EMIO_TTC0 {0} \
CONFIG.PCW_EN_EMIO_TTC1 {0} \
CONFIG.PCW_EN_EMIO_UART0 {0} \
CONFIG.PCW_EN_EMIO_UART1 {0} \
CONFIG.PCW_EN_EMIO_WDT {0} \
CONFIG.PCW_EN_EMIO_WP_SDIO0 {0} \
CONFIG.PCW_EN_EMIO_WP_SDIO1 {0} \
CONFIG.PCW_EN_ENET0 {1} \
CONFIG.PCW_EN_ENET1 {0} \
CONFIG.PCW_EN_GPIO {0} \
CONFIG.PCW_EN_I2C0 {0} \
CONFIG.PCW_EN_I2C1 {0} \
CONFIG.PCW_EN_MODEM_UART0 {0} \
CONFIG.PCW_EN_MODEM_UART1 {0} \
CONFIG.PCW_EN_PJTAG {0} \
CONFIG.PCW_EN_PTP_ENET0 {0} \
CONFIG.PCW_EN_PTP_ENET1 {0} \
CONFIG.PCW_EN_QSPI {1} \
CONFIG.PCW_EN_RST0_PORT {1} \
CONFIG.PCW_EN_RST1_PORT {0} \
CONFIG.PCW_EN_RST2_PORT {0} \
CONFIG.PCW_EN_RST3_PORT {0} \
CONFIG.PCW_EN_SDIO0 {1} \
CONFIG.PCW_EN_SDIO1 {0} \
CONFIG.PCW_EN_SMC {0} \
CONFIG.PCW_EN_SPI0 {0} \
CONFIG.PCW_EN_SPI1 {0} \
CONFIG.PCW_EN_TRACE {0} \
CONFIG.PCW_EN_TTC0 {0} \
CONFIG.PCW_EN_TTC1 {0} \
CONFIG.PCW_EN_UART0 {1} \
CONFIG.PCW_EN_UART1 {0} \
CONFIG.PCW_EN_USB0 {1} \
CONFIG.PCW_EN_USB1 {0} \
CONFIG.PCW_EN_WDT {0} \
CONFIG.PCW_FCLK0_PERIPHERAL_CLKSRC {IO PLL} \
CONFIG.PCW_FCLK0_PERIPHERAL_DIVISOR0 {5} \
CONFIG.PCW_FCLK0_PERIPHERAL_DIVISOR1 {2} \
CONFIG.PCW_FCLK1_PERIPHERAL_CLKSRC {IO PLL} \
CONFIG.PCW_FCLK1_PERIPHERAL_DIVISOR0 {1} \
CONFIG.PCW_FCLK1_PERIPHERAL_DIVISOR1 {1} \
CONFIG.PCW_FCLK2_PERIPHERAL_CLKSRC {IO PLL} \
CONFIG.PCW_FCLK2_PERIPHERAL_DIVISOR0 {1} \
CONFIG.PCW_FCLK2_PERIPHERAL_DIVISOR1 {1} \
CONFIG.PCW_FCLK3_PERIPHERAL_CLKSRC {IO PLL} \
CONFIG.PCW_FCLK3_PERIPHERAL_DIVISOR0 {1} \
CONFIG.PCW_FCLK3_PERIPHERAL_DIVISOR1 {1} \
CONFIG.PCW_FCLK_CLK0_BUF {TRUE} \
CONFIG.PCW_FCLK_CLK1_BUF {FALSE} \
CONFIG.PCW_FCLK_CLK2_BUF {FALSE} \
CONFIG.PCW_FCLK_CLK3_BUF {FALSE} \
CONFIG.PCW_FPGA0_PERIPHERAL_FREQMHZ {100} \
CONFIG.PCW_FPGA1_PERIPHERAL_FREQMHZ {142} \
CONFIG.PCW_FPGA2_PERIPHERAL_FREQMHZ {200} \
CONFIG.PCW_FPGA3_PERIPHERAL_FREQMHZ {160} \
CONFIG.PCW_FPGA_FCLK0_ENABLE {1} \
CONFIG.PCW_FPGA_FCLK1_ENABLE {0} \
CONFIG.PCW_FPGA_FCLK2_ENABLE {0} \
CONFIG.PCW_FPGA_FCLK3_ENABLE {0} \
CONFIG.PCW_FTM_CTI_IN0 {<Select>} \
CONFIG.PCW_FTM_CTI_IN1 {<Select>} \
CONFIG.PCW_FTM_CTI_IN2 {<Select>} \
CONFIG.PCW_FTM_CTI_IN3 {<Select>} \
CONFIG.PCW_FTM_CTI_OUT0 {<Select>} \
CONFIG.PCW_FTM_CTI_OUT1 {<Select>} \
CONFIG.PCW_FTM_CTI_OUT2 {<Select>} \
CONFIG.PCW_FTM_CTI_OUT3 {<Select>} \
CONFIG.PCW_GP0_EN_MODIFIABLE_TXN {0} \
CONFIG.PCW_GP1_EN_MODIFIABLE_TXN {0} \
CONFIG.PCW_GPIO_BASEADDR {0xE000A000} \
CONFIG.PCW_GPIO_EMIO_GPIO_ENABLE {0} \
CONFIG.PCW_GPIO_EMIO_GPIO_IO {<Select>} \
CONFIG.PCW_GPIO_EMIO_GPIO_WIDTH {64} \
CONFIG.PCW_GPIO_HIGHADDR {0xE000AFFF} \
CONFIG.PCW_GPIO_MIO_GPIO_ENABLE {0} \
CONFIG.PCW_GPIO_MIO_GPIO_IO {<Select>} \
CONFIG.PCW_GPIO_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_I2C0_BASEADDR {0xE0004000} \
CONFIG.PCW_I2C0_GRP_INT_ENABLE {0} \
CONFIG.PCW_I2C0_GRP_INT_IO {<Select>} \
CONFIG.PCW_I2C0_HIGHADDR {0xE0004FFF} \
CONFIG.PCW_I2C0_I2C0_IO {<Select>} \
CONFIG.PCW_I2C0_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_I2C0_RESET_ENABLE {0} \
CONFIG.PCW_I2C0_RESET_IO {<Select>} \
CONFIG.PCW_I2C1_BASEADDR {0xE0005000} \
CONFIG.PCW_I2C1_GRP_INT_ENABLE {0} \
CONFIG.PCW_I2C1_GRP_INT_IO {<Select>} \
CONFIG.PCW_I2C1_HIGHADDR {0xE0005FFF} \
CONFIG.PCW_I2C1_I2C1_IO {<Select>} \
CONFIG.PCW_I2C1_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_I2C1_RESET_ENABLE {0} \
CONFIG.PCW_I2C1_RESET_IO {<Select>} \
CONFIG.PCW_I2C_PERIPHERAL_FREQMHZ {108.333336} \
CONFIG.PCW_I2C_RESET_ENABLE {0} \
CONFIG.PCW_I2C_RESET_POLARITY {Active Low} \
CONFIG.PCW_I2C_RESET_SELECT {<Select>} \
CONFIG.PCW_IMPORT_BOARD_PRESET {None} \
CONFIG.PCW_INCLUDE_ACP_TRANS_CHECK {0} \
CONFIG.PCW_INCLUDE_TRACE_BUFFER {0} \
CONFIG.PCW_IOPLL_CTRL_FBDIV {20} \
CONFIG.PCW_IO_IO_PLL_FREQMHZ {1000.000} \
CONFIG.PCW_IRQ_F2P_INTR {1} \
CONFIG.PCW_IRQ_F2P_MODE {DIRECT} \
CONFIG.PCW_MIO_0_DIRECTION {<Select>} \
CONFIG.PCW_MIO_0_IOTYPE {<Select>} \
CONFIG.PCW_MIO_0_PULLUP {<Select>} \
CONFIG.PCW_MIO_0_SLEW {<Select>} \
CONFIG.PCW_MIO_10_DIRECTION {<Select>} \
CONFIG.PCW_MIO_10_IOTYPE {<Select>} \
CONFIG.PCW_MIO_10_PULLUP {<Select>} \
CONFIG.PCW_MIO_10_SLEW {<Select>} \
CONFIG.PCW_MIO_11_DIRECTION {<Select>} \
CONFIG.PCW_MIO_11_IOTYPE {<Select>} \
CONFIG.PCW_MIO_11_PULLUP {<Select>} \
CONFIG.PCW_MIO_11_SLEW {<Select>} \
CONFIG.PCW_MIO_12_DIRECTION {<Select>} \
CONFIG.PCW_MIO_12_IOTYPE {<Select>} \
CONFIG.PCW_MIO_12_PULLUP {<Select>} \
CONFIG.PCW_MIO_12_SLEW {<Select>} \
CONFIG.PCW_MIO_13_DIRECTION {<Select>} \
CONFIG.PCW_MIO_13_IOTYPE {<Select>} \
CONFIG.PCW_MIO_13_PULLUP {<Select>} \
CONFIG.PCW_MIO_13_SLEW {<Select>} \
CONFIG.PCW_MIO_14_DIRECTION {in} \
CONFIG.PCW_MIO_14_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_14_PULLUP {enabled} \
CONFIG.PCW_MIO_14_SLEW {slow} \
CONFIG.PCW_MIO_15_DIRECTION {out} \
CONFIG.PCW_MIO_15_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_15_PULLUP {enabled} \
CONFIG.PCW_MIO_15_SLEW {slow} \
CONFIG.PCW_MIO_16_DIRECTION {out} \
CONFIG.PCW_MIO_16_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_16_PULLUP {enabled} \
CONFIG.PCW_MIO_16_SLEW {slow} \
CONFIG.PCW_MIO_17_DIRECTION {out} \
CONFIG.PCW_MIO_17_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_17_PULLUP {enabled} \
CONFIG.PCW_MIO_17_SLEW {slow} \
CONFIG.PCW_MIO_18_DIRECTION {out} \
CONFIG.PCW_MIO_18_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_18_PULLUP {enabled} \
CONFIG.PCW_MIO_18_SLEW {slow} \
CONFIG.PCW_MIO_19_DIRECTION {out} \
CONFIG.PCW_MIO_19_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_19_PULLUP {enabled} \
CONFIG.PCW_MIO_19_SLEW {slow} \
CONFIG.PCW_MIO_1_DIRECTION {out} \
CONFIG.PCW_MIO_1_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_1_PULLUP {enabled} \
CONFIG.PCW_MIO_1_SLEW {slow} \
CONFIG.PCW_MIO_20_DIRECTION {out} \
CONFIG.PCW_MIO_20_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_20_PULLUP {enabled} \
CONFIG.PCW_MIO_20_SLEW {slow} \
CONFIG.PCW_MIO_21_DIRECTION {out} \
CONFIG.PCW_MIO_21_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_21_PULLUP {enabled} \
CONFIG.PCW_MIO_21_SLEW {slow} \
CONFIG.PCW_MIO_22_DIRECTION {in} \
CONFIG.PCW_MIO_22_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_22_PULLUP {enabled} \
CONFIG.PCW_MIO_22_SLEW {slow} \
CONFIG.PCW_MIO_23_DIRECTION {in} \
CONFIG.PCW_MIO_23_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_23_PULLUP {enabled} \
CONFIG.PCW_MIO_23_SLEW {slow} \
CONFIG.PCW_MIO_24_DIRECTION {in} \
CONFIG.PCW_MIO_24_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_24_PULLUP {enabled} \
CONFIG.PCW_MIO_24_SLEW {slow} \
CONFIG.PCW_MIO_25_DIRECTION {in} \
CONFIG.PCW_MIO_25_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_25_PULLUP {enabled} \
CONFIG.PCW_MIO_25_SLEW {slow} \
CONFIG.PCW_MIO_26_DIRECTION {in} \
CONFIG.PCW_MIO_26_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_26_PULLUP {enabled} \
CONFIG.PCW_MIO_26_SLEW {slow} \
CONFIG.PCW_MIO_27_DIRECTION {in} \
CONFIG.PCW_MIO_27_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_27_PULLUP {enabled} \
CONFIG.PCW_MIO_27_SLEW {slow} \
CONFIG.PCW_MIO_28_DIRECTION {inout} \
CONFIG.PCW_MIO_28_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_28_PULLUP {enabled} \
CONFIG.PCW_MIO_28_SLEW {slow} \
CONFIG.PCW_MIO_29_DIRECTION {in} \
CONFIG.PCW_MIO_29_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_29_PULLUP {enabled} \
CONFIG.PCW_MIO_29_SLEW {slow} \
CONFIG.PCW_MIO_2_DIRECTION {inout} \
CONFIG.PCW_MIO_2_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_2_PULLUP {disabled} \
CONFIG.PCW_MIO_2_SLEW {slow} \
CONFIG.PCW_MIO_30_DIRECTION {out} \
CONFIG.PCW_MIO_30_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_30_PULLUP {enabled} \
CONFIG.PCW_MIO_30_SLEW {slow} \
CONFIG.PCW_MIO_31_DIRECTION {in} \
CONFIG.PCW_MIO_31_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_31_PULLUP {enabled} \
CONFIG.PCW_MIO_31_SLEW {slow} \
CONFIG.PCW_MIO_32_DIRECTION {inout} \
CONFIG.PCW_MIO_32_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_32_PULLUP {enabled} \
CONFIG.PCW_MIO_32_SLEW {slow} \
CONFIG.PCW_MIO_33_DIRECTION {inout} \
CONFIG.PCW_MIO_33_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_33_PULLUP {enabled} \
CONFIG.PCW_MIO_33_SLEW {slow} \
CONFIG.PCW_MIO_34_DIRECTION {inout} \
CONFIG.PCW_MIO_34_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_34_PULLUP {enabled} \
CONFIG.PCW_MIO_34_SLEW {slow} \
CONFIG.PCW_MIO_35_DIRECTION {inout} \
CONFIG.PCW_MIO_35_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_35_PULLUP {enabled} \
CONFIG.PCW_MIO_35_SLEW {slow} \
CONFIG.PCW_MIO_36_DIRECTION {in} \
CONFIG.PCW_MIO_36_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_36_PULLUP {enabled} \
CONFIG.PCW_MIO_36_SLEW {slow} \
CONFIG.PCW_MIO_37_DIRECTION {inout} \
CONFIG.PCW_MIO_37_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_37_PULLUP {enabled} \
CONFIG.PCW_MIO_37_SLEW {slow} \
CONFIG.PCW_MIO_38_DIRECTION {inout} \
CONFIG.PCW_MIO_38_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_38_PULLUP {enabled} \
CONFIG.PCW_MIO_38_SLEW {slow} \
CONFIG.PCW_MIO_39_DIRECTION {inout} \
CONFIG.PCW_MIO_39_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_39_PULLUP {enabled} \
CONFIG.PCW_MIO_39_SLEW {slow} \
CONFIG.PCW_MIO_3_DIRECTION {inout} \
CONFIG.PCW_MIO_3_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_3_PULLUP {disabled} \
CONFIG.PCW_MIO_3_SLEW {slow} \
CONFIG.PCW_MIO_40_DIRECTION {inout} \
CONFIG.PCW_MIO_40_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_40_PULLUP {enabled} \
CONFIG.PCW_MIO_40_SLEW {slow} \
CONFIG.PCW_MIO_41_DIRECTION {inout} \
CONFIG.PCW_MIO_41_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_41_PULLUP {enabled} \
CONFIG.PCW_MIO_41_SLEW {slow} \
CONFIG.PCW_MIO_42_DIRECTION {inout} \
CONFIG.PCW_MIO_42_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_42_PULLUP {enabled} \
CONFIG.PCW_MIO_42_SLEW {slow} \
CONFIG.PCW_MIO_43_DIRECTION {inout} \
CONFIG.PCW_MIO_43_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_43_PULLUP {enabled} \
CONFIG.PCW_MIO_43_SLEW {slow} \
CONFIG.PCW_MIO_44_DIRECTION {inout} \
CONFIG.PCW_MIO_44_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_44_PULLUP {enabled} \
CONFIG.PCW_MIO_44_SLEW {slow} \
CONFIG.PCW_MIO_45_DIRECTION {inout} \
CONFIG.PCW_MIO_45_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_45_PULLUP {enabled} \
CONFIG.PCW_MIO_45_SLEW {slow} \
CONFIG.PCW_MIO_46_DIRECTION {<Select>} \
CONFIG.PCW_MIO_46_IOTYPE {<Select>} \
CONFIG.PCW_MIO_46_PULLUP {<Select>} \
CONFIG.PCW_MIO_46_SLEW {<Select>} \
CONFIG.PCW_MIO_47_DIRECTION {in} \
CONFIG.PCW_MIO_47_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_47_PULLUP {enabled} \
CONFIG.PCW_MIO_47_SLEW {slow} \
CONFIG.PCW_MIO_48_DIRECTION {<Select>} \
CONFIG.PCW_MIO_48_IOTYPE {<Select>} \
CONFIG.PCW_MIO_48_PULLUP {<Select>} \
CONFIG.PCW_MIO_48_SLEW {<Select>} \
CONFIG.PCW_MIO_49_DIRECTION {<Select>} \
CONFIG.PCW_MIO_49_IOTYPE {<Select>} \
CONFIG.PCW_MIO_49_PULLUP {<Select>} \
CONFIG.PCW_MIO_49_SLEW {<Select>} \
CONFIG.PCW_MIO_4_DIRECTION {inout} \
CONFIG.PCW_MIO_4_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_4_PULLUP {disabled} \
CONFIG.PCW_MIO_4_SLEW {slow} \
CONFIG.PCW_MIO_50_DIRECTION {<Select>} \
CONFIG.PCW_MIO_50_IOTYPE {<Select>} \
CONFIG.PCW_MIO_50_PULLUP {<Select>} \
CONFIG.PCW_MIO_50_SLEW {<Select>} \
CONFIG.PCW_MIO_51_DIRECTION {<Select>} \
CONFIG.PCW_MIO_51_IOTYPE {<Select>} \
CONFIG.PCW_MIO_51_PULLUP {<Select>} \
CONFIG.PCW_MIO_51_SLEW {<Select>} \
CONFIG.PCW_MIO_52_DIRECTION {out} \
CONFIG.PCW_MIO_52_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_52_PULLUP {enabled} \
CONFIG.PCW_MIO_52_SLEW {slow} \
CONFIG.PCW_MIO_53_DIRECTION {inout} \
CONFIG.PCW_MIO_53_IOTYPE {LVCMOS 1.8V} \
CONFIG.PCW_MIO_53_PULLUP {enabled} \
CONFIG.PCW_MIO_53_SLEW {slow} \
CONFIG.PCW_MIO_5_DIRECTION {inout} \
CONFIG.PCW_MIO_5_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_5_PULLUP {disabled} \
CONFIG.PCW_MIO_5_SLEW {slow} \
CONFIG.PCW_MIO_6_DIRECTION {out} \
CONFIG.PCW_MIO_6_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_6_PULLUP {disabled} \
CONFIG.PCW_MIO_6_SLEW {slow} \
CONFIG.PCW_MIO_7_DIRECTION {<Select>} \
CONFIG.PCW_MIO_7_IOTYPE {<Select>} \
CONFIG.PCW_MIO_7_PULLUP {<Select>} \
CONFIG.PCW_MIO_7_SLEW {<Select>} \
CONFIG.PCW_MIO_8_DIRECTION {out} \
CONFIG.PCW_MIO_8_IOTYPE {LVCMOS 3.3V} \
CONFIG.PCW_MIO_8_PULLUP {disabled} \
CONFIG.PCW_MIO_8_SLEW {slow} \
CONFIG.PCW_MIO_9_DIRECTION {<Select>} \
CONFIG.PCW_MIO_9_IOTYPE {<Select>} \
CONFIG.PCW_MIO_9_PULLUP {<Select>} \
CONFIG.PCW_MIO_9_SLEW {<Select>} \
CONFIG.PCW_MIO_PRIMITIVE {54} \
CONFIG.PCW_MIO_TREE_PERIPHERALS {unassigned#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#unassigned#Quad SPI Flash#unassigned#unassigned#unassigned#unassigned#unassigned#UART 0#UART 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#Enet 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#SD 0#SD 0#SD 0#SD 0#SD 0#SD 0#unassigned#SD 0#unassigned#unassigned#unassigned#unassigned#Enet 0#Enet 0} \
CONFIG.PCW_MIO_TREE_SIGNALS {unassigned#qspi0_ss_b#qspi0_io[0]#qspi0_io[1]#qspi0_io[2]#qspi0_io[3]#qspi0_sclk#unassigned#qspi_fbclk#unassigned#unassigned#unassigned#unassigned#unassigned#rx#tx#tx_clk#txd[0]#txd[1]#txd[2]#txd[3]#tx_ctl#rx_clk#rxd[0]#rxd[1]#rxd[2]#rxd[3]#rx_ctl#data[4]#dir#stp#nxt#data[0]#data[1]#data[2]#data[3]#clk#data[5]#data[6]#data[7]#clk#cmd#data[0]#data[1]#data[2]#data[3]#unassigned#cd#unassigned#unassigned#unassigned#unassigned#mdc#mdio} \
CONFIG.PCW_M_AXI_GP0_ENABLE_STATIC_REMAP {0} \
CONFIG.PCW_M_AXI_GP0_ID_WIDTH {12} \
CONFIG.PCW_M_AXI_GP0_SUPPORT_NARROW_BURST {0} \
CONFIG.PCW_M_AXI_GP0_THREAD_ID_WIDTH {12} \
CONFIG.PCW_M_AXI_GP1_ENABLE_STATIC_REMAP {0} \
CONFIG.PCW_M_AXI_GP1_ID_WIDTH {12} \
CONFIG.PCW_M_AXI_GP1_SUPPORT_NARROW_BURST {0} \
CONFIG.PCW_M_AXI_GP1_THREAD_ID_WIDTH {12} \
CONFIG.PCW_NAND_CYCLES_T_AR {1} \
CONFIG.PCW_NAND_CYCLES_T_CLR {1} \
CONFIG.PCW_NAND_CYCLES_T_RC {11} \
CONFIG.PCW_NAND_CYCLES_T_REA {1} \
CONFIG.PCW_NAND_CYCLES_T_RR {1} \
CONFIG.PCW_NAND_CYCLES_T_WC {11} \
CONFIG.PCW_NAND_CYCLES_T_WP {1} \
CONFIG.PCW_NAND_GRP_D8_ENABLE {0} \
CONFIG.PCW_NAND_GRP_D8_IO {<Select>} \
CONFIG.PCW_NAND_NAND_IO {<Select>} \
CONFIG.PCW_NAND_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_NOR_CS0_T_CEOE {1} \
CONFIG.PCW_NOR_CS0_T_PC {1} \
CONFIG.PCW_NOR_CS0_T_RC {11} \
CONFIG.PCW_NOR_CS0_T_TR {1} \
CONFIG.PCW_NOR_CS0_T_WC {11} \
CONFIG.PCW_NOR_CS0_T_WP {1} \
CONFIG.PCW_NOR_CS0_WE_TIME {0} \
CONFIG.PCW_NOR_CS1_T_CEOE {1} \
CONFIG.PCW_NOR_CS1_T_PC {1} \
CONFIG.PCW_NOR_CS1_T_RC {11} \
CONFIG.PCW_NOR_CS1_T_TR {1} \
CONFIG.PCW_NOR_CS1_T_WC {11} \
CONFIG.PCW_NOR_CS1_T_WP {1} \
CONFIG.PCW_NOR_CS1_WE_TIME {0} \
CONFIG.PCW_NOR_GRP_A25_ENABLE {0} \
CONFIG.PCW_NOR_GRP_A25_IO {<Select>} \
CONFIG.PCW_NOR_GRP_CS0_ENABLE {0} \
CONFIG.PCW_NOR_GRP_CS0_IO {<Select>} \
CONFIG.PCW_NOR_GRP_CS1_ENABLE {0} \
CONFIG.PCW_NOR_GRP_CS1_IO {<Select>} \
CONFIG.PCW_NOR_GRP_SRAM_CS0_ENABLE {0} \
CONFIG.PCW_NOR_GRP_SRAM_CS0_IO {<Select>} \
CONFIG.PCW_NOR_GRP_SRAM_CS1_ENABLE {0} \
CONFIG.PCW_NOR_GRP_SRAM_CS1_IO {<Select>} \
CONFIG.PCW_NOR_GRP_SRAM_INT_ENABLE {0} \
CONFIG.PCW_NOR_GRP_SRAM_INT_IO {<Select>} \
CONFIG.PCW_NOR_NOR_IO {<Select>} \
CONFIG.PCW_NOR_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_NOR_SRAM_CS0_T_CEOE {1} \
CONFIG.PCW_NOR_SRAM_CS0_T_PC {1} \
CONFIG.PCW_NOR_SRAM_CS0_T_RC {11} \
CONFIG.PCW_NOR_SRAM_CS0_T_TR {1} \
CONFIG.PCW_NOR_SRAM_CS0_T_WC {11} \
CONFIG.PCW_NOR_SRAM_CS0_T_WP {1} \
CONFIG.PCW_NOR_SRAM_CS0_WE_TIME {0} \
CONFIG.PCW_NOR_SRAM_CS1_T_CEOE {1} \
CONFIG.PCW_NOR_SRAM_CS1_T_PC {1} \
CONFIG.PCW_NOR_SRAM_CS1_T_RC {11} \
CONFIG.PCW_NOR_SRAM_CS1_T_TR {1} \
CONFIG.PCW_NOR_SRAM_CS1_T_WC {11} \
CONFIG.PCW_NOR_SRAM_CS1_T_WP {1} \
CONFIG.PCW_NOR_SRAM_CS1_WE_TIME {0} \
CONFIG.PCW_OVERRIDE_BASIC_CLOCK {0} \
CONFIG.PCW_P2F_CAN0_INTR {0} \
CONFIG.PCW_P2F_CAN1_INTR {0} \
CONFIG.PCW_P2F_CTI_INTR {0} \
CONFIG.PCW_P2F_DMAC0_INTR {0} \
CONFIG.PCW_P2F_DMAC1_INTR {0} \
CONFIG.PCW_P2F_DMAC2_INTR {0} \
CONFIG.PCW_P2F_DMAC3_INTR {0} \
CONFIG.PCW_P2F_DMAC4_INTR {0} \
CONFIG.PCW_P2F_DMAC5_INTR {0} \
CONFIG.PCW_P2F_DMAC6_INTR {0} \
CONFIG.PCW_P2F_DMAC7_INTR {0} \
CONFIG.PCW_P2F_DMAC_ABORT_INTR {0} \
CONFIG.PCW_P2F_ENET0_INTR {0} \
CONFIG.PCW_P2F_ENET1_INTR {0} \
CONFIG.PCW_P2F_GPIO_INTR {0} \
CONFIG.PCW_P2F_I2C0_INTR {0} \
CONFIG.PCW_P2F_I2C1_INTR {0} \
CONFIG.PCW_P2F_QSPI_INTR {0} \
CONFIG.PCW_P2F_SDIO0_INTR {0} \
CONFIG.PCW_P2F_SDIO1_INTR {0} \
CONFIG.PCW_P2F_SMC_INTR {0} \
CONFIG.PCW_P2F_SPI0_INTR {0} \
CONFIG.PCW_P2F_SPI1_INTR {0} \
CONFIG.PCW_P2F_UART0_INTR {0} \
CONFIG.PCW_P2F_UART1_INTR {0} \
CONFIG.PCW_P2F_USB0_INTR {0} \
CONFIG.PCW_P2F_USB1_INTR {0} \
CONFIG.PCW_PACKAGE_DDR_BOARD_DELAY0 {0.223} \
CONFIG.PCW_PACKAGE_DDR_BOARD_DELAY1 {0.212} \
CONFIG.PCW_PACKAGE_DDR_BOARD_DELAY2 {0.085} \
CONFIG.PCW_PACKAGE_DDR_BOARD_DELAY3 {0.092} \
CONFIG.PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_0 {0.040} \
CONFIG.PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_1 {0.058} \
CONFIG.PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_2 {-0.009} \
CONFIG.PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_3 {-0.033} \
CONFIG.PCW_PACKAGE_NAME {clg400} \
CONFIG.PCW_PCAP_PERIPHERAL_CLKSRC {IO PLL} \
CONFIG.PCW_PCAP_PERIPHERAL_DIVISOR0 {5} \
CONFIG.PCW_PCAP_PERIPHERAL_FREQMHZ {200} \
CONFIG.PCW_PERIPHERAL_BOARD_PRESET {None} \
CONFIG.PCW_PJTAG_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_PJTAG_PJTAG_IO {<Select>} \
CONFIG.PCW_PLL_BYPASSMODE_ENABLE {0} \
CONFIG.PCW_PRESET_BANK0_VOLTAGE {LVCMOS 3.3V} \
CONFIG.PCW_PRESET_BANK1_VOLTAGE {LVCMOS 1.8V} \
CONFIG.PCW_PS7_SI_REV {PRODUCTION} \
CONFIG.PCW_QSPI_GRP_FBCLK_ENABLE {1} \
CONFIG.PCW_QSPI_GRP_FBCLK_IO {MIO 8} \
CONFIG.PCW_QSPI_GRP_IO1_ENABLE {0} \
CONFIG.PCW_QSPI_GRP_IO1_IO {<Select>} \
CONFIG.PCW_QSPI_GRP_SINGLE_SS_ENABLE {1} \
CONFIG.PCW_QSPI_GRP_SINGLE_SS_IO {MIO 1 .. 6} \
CONFIG.PCW_QSPI_GRP_SS1_ENABLE {0} \
CONFIG.PCW_QSPI_GRP_SS1_IO {<Select>} \
CONFIG.PCW_QSPI_INTERNAL_HIGHADDRESS {0xFCFFFFFF} \
CONFIG.PCW_QSPI_PERIPHERAL_CLKSRC {IO PLL} \
CONFIG.PCW_QSPI_PERIPHERAL_DIVISOR0 {5} \
CONFIG.PCW_QSPI_PERIPHERAL_ENABLE {1} \
CONFIG.PCW_QSPI_PERIPHERAL_FREQMHZ {200} \
CONFIG.PCW_QSPI_QSPI_IO {MIO 1 .. 6} \
CONFIG.PCW_SD0_GRP_CD_ENABLE {1} \
CONFIG.PCW_SD0_GRP_CD_IO {MIO 47} \
CONFIG.PCW_SD0_GRP_POW_ENABLE {0} \
CONFIG.PCW_SD0_GRP_POW_IO {<Select>} \
CONFIG.PCW_SD0_GRP_WP_ENABLE {0} \
CONFIG.PCW_SD0_GRP_WP_IO {<Select>} \
CONFIG.PCW_SD0_PERIPHERAL_ENABLE {1} \
CONFIG.PCW_SD0_SD0_IO {MIO 40 .. 45} \
CONFIG.PCW_SD1_GRP_CD_ENABLE {0} \
CONFIG.PCW_SD1_GRP_CD_IO {<Select>} \
CONFIG.PCW_SD1_GRP_POW_ENABLE {0} \
CONFIG.PCW_SD1_GRP_POW_IO {<Select>} \
CONFIG.PCW_SD1_GRP_WP_ENABLE {0} \
CONFIG.PCW_SD1_GRP_WP_IO {<Select>} \
CONFIG.PCW_SD1_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_SD1_SD1_IO {<Select>} \
CONFIG.PCW_SDIO0_BASEADDR {0xE0100000} \
CONFIG.PCW_SDIO0_HIGHADDR {0xE0100FFF} \
CONFIG.PCW_SDIO1_BASEADDR {0xE0101000} \
CONFIG.PCW_SDIO1_HIGHADDR {0xE0101FFF} \
CONFIG.PCW_SDIO_PERIPHERAL_CLKSRC {IO PLL} \
CONFIG.PCW_SDIO_PERIPHERAL_DIVISOR0 {20} \
CONFIG.PCW_SDIO_PERIPHERAL_FREQMHZ {50} \
CONFIG.PCW_SDIO_PERIPHERAL_VALID {1} \
CONFIG.PCW_SMC_CYCLE_T0 {NA} \
CONFIG.PCW_SMC_CYCLE_T1 {NA} \
CONFIG.PCW_SMC_CYCLE_T2 {NA} \
CONFIG.PCW_SMC_CYCLE_T3 {NA} \
CONFIG.PCW_SMC_CYCLE_T4 {NA} \
CONFIG.PCW_SMC_CYCLE_T5 {NA} \
CONFIG.PCW_SMC_CYCLE_T6 {NA} \
CONFIG.PCW_SMC_PERIPHERAL_CLKSRC {IO PLL} \
CONFIG.PCW_SMC_PERIPHERAL_DIVISOR0 {1} \
CONFIG.PCW_SMC_PERIPHERAL_FREQMHZ {100} \
CONFIG.PCW_SMC_PERIPHERAL_VALID {0} \
CONFIG.PCW_SPI0_BASEADDR {0xE0006000} \
CONFIG.PCW_SPI0_GRP_SS0_ENABLE {0} \
CONFIG.PCW_SPI0_GRP_SS0_IO {<Select>} \
CONFIG.PCW_SPI0_GRP_SS1_ENABLE {0} \
CONFIG.PCW_SPI0_GRP_SS1_IO {<Select>} \
CONFIG.PCW_SPI0_GRP_SS2_ENABLE {0} \
CONFIG.PCW_SPI0_GRP_SS2_IO {<Select>} \
CONFIG.PCW_SPI0_HIGHADDR {0xE0006FFF} \
CONFIG.PCW_SPI0_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_SPI0_SPI0_IO {<Select>} \
CONFIG.PCW_SPI1_BASEADDR {0xE0007000} \
CONFIG.PCW_SPI1_GRP_SS0_ENABLE {0} \
CONFIG.PCW_SPI1_GRP_SS0_IO {<Select>} \
CONFIG.PCW_SPI1_GRP_SS1_ENABLE {0} \
CONFIG.PCW_SPI1_GRP_SS1_IO {<Select>} \
CONFIG.PCW_SPI1_GRP_SS2_ENABLE {0} \
CONFIG.PCW_SPI1_GRP_SS2_IO {<Select>} \
CONFIG.PCW_SPI1_HIGHADDR {0xE0007FFF} \
CONFIG.PCW_SPI1_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_SPI1_SPI1_IO {<Select>} \
CONFIG.PCW_SPI_PERIPHERAL_CLKSRC {IO PLL} \
CONFIG.PCW_SPI_PERIPHERAL_DIVISOR0 {1} \
CONFIG.PCW_SPI_PERIPHERAL_FREQMHZ {166.666666} \
CONFIG.PCW_SPI_PERIPHERAL_VALID {0} \
CONFIG.PCW_S_AXI_ACP_ARUSER_VAL {31} \
CONFIG.PCW_S_AXI_ACP_AWUSER_VAL {31} \
CONFIG.PCW_S_AXI_ACP_ID_WIDTH {3} \
CONFIG.PCW_S_AXI_GP0_ID_WIDTH {6} \
CONFIG.PCW_S_AXI_GP1_ID_WIDTH {6} \
CONFIG.PCW_S_AXI_HP0_DATA_WIDTH {64} \
CONFIG.PCW_S_AXI_HP0_ID_WIDTH {6} \
CONFIG.PCW_S_AXI_HP1_DATA_WIDTH {64} \
CONFIG.PCW_S_AXI_HP1_ID_WIDTH {6} \
CONFIG.PCW_S_AXI_HP2_DATA_WIDTH {64} \
CONFIG.PCW_S_AXI_HP2_ID_WIDTH {6} \
CONFIG.PCW_S_AXI_HP3_DATA_WIDTH {64} \
CONFIG.PCW_S_AXI_HP3_ID_WIDTH {6} \
CONFIG.PCW_TPIU_PERIPHERAL_CLKSRC {External} \
CONFIG.PCW_TPIU_PERIPHERAL_DIVISOR0 {1} \
CONFIG.PCW_TPIU_PERIPHERAL_FREQMHZ {200} \
CONFIG.PCW_TRACE_BUFFER_CLOCK_DELAY {12} \
CONFIG.PCW_TRACE_BUFFER_FIFO_SIZE {128} \
CONFIG.PCW_TRACE_GRP_16BIT_ENABLE {0} \
CONFIG.PCW_TRACE_GRP_16BIT_IO {<Select>} \
CONFIG.PCW_TRACE_GRP_2BIT_ENABLE {0} \
CONFIG.PCW_TRACE_GRP_2BIT_IO {<Select>} \
CONFIG.PCW_TRACE_GRP_32BIT_ENABLE {0} \
CONFIG.PCW_TRACE_GRP_32BIT_IO {<Select>} \
CONFIG.PCW_TRACE_GRP_4BIT_ENABLE {0} \
CONFIG.PCW_TRACE_GRP_4BIT_IO {<Select>} \
CONFIG.PCW_TRACE_GRP_8BIT_ENABLE {0} \
CONFIG.PCW_TRACE_GRP_8BIT_IO {<Select>} \
CONFIG.PCW_TRACE_INTERNAL_WIDTH {2} \
CONFIG.PCW_TRACE_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_TRACE_PIPELINE_WIDTH {8} \
CONFIG.PCW_TRACE_TRACE_IO {<Select>} \
CONFIG.PCW_TTC0_BASEADDR {0xE0104000} \
CONFIG.PCW_TTC0_CLK0_PERIPHERAL_CLKSRC {CPU_1X} \
CONFIG.PCW_TTC0_CLK0_PERIPHERAL_DIVISOR0 {1} \
CONFIG.PCW_TTC0_CLK0_PERIPHERAL_FREQMHZ {133.333333} \
CONFIG.PCW_TTC0_CLK1_PERIPHERAL_CLKSRC {CPU_1X} \
CONFIG.PCW_TTC0_CLK1_PERIPHERAL_DIVISOR0 {1} \
CONFIG.PCW_TTC0_CLK1_PERIPHERAL_FREQMHZ {133.333333} \
CONFIG.PCW_TTC0_CLK2_PERIPHERAL_CLKSRC {CPU_1X} \
CONFIG.PCW_TTC0_CLK2_PERIPHERAL_DIVISOR0 {1} \
CONFIG.PCW_TTC0_CLK2_PERIPHERAL_FREQMHZ {133.333333} \
CONFIG.PCW_TTC0_HIGHADDR {0xE0104fff} \
CONFIG.PCW_TTC0_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_TTC0_TTC0_IO {<Select>} \
CONFIG.PCW_TTC1_BASEADDR {0xE0105000} \
CONFIG.PCW_TTC1_CLK0_PERIPHERAL_CLKSRC {CPU_1X} \
CONFIG.PCW_TTC1_CLK0_PERIPHERAL_DIVISOR0 {1} \
CONFIG.PCW_TTC1_CLK0_PERIPHERAL_FREQMHZ {133.333333} \
CONFIG.PCW_TTC1_CLK1_PERIPHERAL_CLKSRC {CPU_1X} \
CONFIG.PCW_TTC1_CLK1_PERIPHERAL_DIVISOR0 {1} \
CONFIG.PCW_TTC1_CLK1_PERIPHERAL_FREQMHZ {133.333333} \
CONFIG.PCW_TTC1_CLK2_PERIPHERAL_CLKSRC {CPU_1X} \
CONFIG.PCW_TTC1_CLK2_PERIPHERAL_DIVISOR0 {1} \
CONFIG.PCW_TTC1_CLK2_PERIPHERAL_FREQMHZ {133.333333} \
CONFIG.PCW_TTC1_HIGHADDR {0xE0105fff} \
CONFIG.PCW_TTC1_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_TTC1_TTC1_IO {<Select>} \
CONFIG.PCW_TTC_PERIPHERAL_FREQMHZ {50} \
CONFIG.PCW_UART0_BASEADDR {0xE0000000} \
CONFIG.PCW_UART0_BAUD_RATE {115200} \
CONFIG.PCW_UART0_GRP_FULL_ENABLE {0} \
CONFIG.PCW_UART0_GRP_FULL_IO {<Select>} \
CONFIG.PCW_UART0_HIGHADDR {0xE0000FFF} \
CONFIG.PCW_UART0_PERIPHERAL_ENABLE {1} \
CONFIG.PCW_UART0_UART0_IO {MIO 14 .. 15} \
CONFIG.PCW_UART1_BASEADDR {0xE0001000} \
CONFIG.PCW_UART1_BAUD_RATE {115200} \
CONFIG.PCW_UART1_GRP_FULL_ENABLE {0} \
CONFIG.PCW_UART1_GRP_FULL_IO {<Select>} \
CONFIG.PCW_UART1_HIGHADDR {0xE0001FFF} \
CONFIG.PCW_UART1_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_UART1_UART1_IO {<Select>} \
CONFIG.PCW_UART_PERIPHERAL_CLKSRC {IO PLL} \
CONFIG.PCW_UART_PERIPHERAL_DIVISOR0 {10} \
CONFIG.PCW_UART_PERIPHERAL_FREQMHZ {100} \
CONFIG.PCW_UART_PERIPHERAL_VALID {1} \
CONFIG.PCW_UIPARAM_ACT_DDR_FREQ_MHZ {525.000000} \
CONFIG.PCW_UIPARAM_DDR_ADV_ENABLE {0} \
CONFIG.PCW_UIPARAM_DDR_AL {0} \
CONFIG.PCW_UIPARAM_DDR_BANK_ADDR_COUNT {3} \
CONFIG.PCW_UIPARAM_DDR_BL {8} \
CONFIG.PCW_UIPARAM_DDR_BOARD_DELAY0 {0.223} \
CONFIG.PCW_UIPARAM_DDR_BOARD_DELAY1 {0.212} \
CONFIG.PCW_UIPARAM_DDR_BOARD_DELAY2 {0.085} \
CONFIG.PCW_UIPARAM_DDR_BOARD_DELAY3 {0.092} \
CONFIG.PCW_UIPARAM_DDR_BUS_WIDTH {16 Bit} \
CONFIG.PCW_UIPARAM_DDR_CL {7} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_0_LENGTH_MM {25.8} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_0_PACKAGE_LENGTH {80.4535} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_0_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_1_LENGTH_MM {25.8} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_1_PACKAGE_LENGTH {80.4535} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_1_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_2_LENGTH_MM {0} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_2_PACKAGE_LENGTH {80.4535} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_2_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_3_LENGTH_MM {0} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_3_PACKAGE_LENGTH {80.4535} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_3_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_CLOCK_STOP_EN {0} \
CONFIG.PCW_UIPARAM_DDR_COL_ADDR_COUNT {10} \
CONFIG.PCW_UIPARAM_DDR_CWL {6} \
CONFIG.PCW_UIPARAM_DDR_DEVICE_CAPACITY {4096 MBits} \
CONFIG.PCW_UIPARAM_DDR_DQS_0_LENGTH_MM {15.6} \
CONFIG.PCW_UIPARAM_DDR_DQS_0_PACKAGE_LENGTH {105.056} \
CONFIG.PCW_UIPARAM_DDR_DQS_0_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_DQS_1_LENGTH_MM {18.8} \
CONFIG.PCW_UIPARAM_DDR_DQS_1_PACKAGE_LENGTH {66.904} \
CONFIG.PCW_UIPARAM_DDR_DQS_1_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_DQS_2_LENGTH_MM {0} \
CONFIG.PCW_UIPARAM_DDR_DQS_2_PACKAGE_LENGTH {89.1715} \
CONFIG.PCW_UIPARAM_DDR_DQS_2_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_DQS_3_LENGTH_MM {0} \
CONFIG.PCW_UIPARAM_DDR_DQS_3_PACKAGE_LENGTH {113.63} \
CONFIG.PCW_UIPARAM_DDR_DQS_3_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_0 {0.040} \
CONFIG.PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_1 {0.058} \
CONFIG.PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_2 {-0.009} \
CONFIG.PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_3 {-0.033} \
CONFIG.PCW_UIPARAM_DDR_DQ_0_LENGTH_MM {16.5} \
CONFIG.PCW_UIPARAM_DDR_DQ_0_PACKAGE_LENGTH {98.503} \
CONFIG.PCW_UIPARAM_DDR_DQ_0_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_DQ_1_LENGTH_MM {18} \
CONFIG.PCW_UIPARAM_DDR_DQ_1_PACKAGE_LENGTH {68.5855} \
CONFIG.PCW_UIPARAM_DDR_DQ_1_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_DQ_2_LENGTH_MM {0} \
CONFIG.PCW_UIPARAM_DDR_DQ_2_PACKAGE_LENGTH {90.295} \
CONFIG.PCW_UIPARAM_DDR_DQ_2_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_DQ_3_LENGTH_MM {0} \
CONFIG.PCW_UIPARAM_DDR_DQ_3_PACKAGE_LENGTH {103.977} \
CONFIG.PCW_UIPARAM_DDR_DQ_3_PROPOGATION_DELAY {160} \
CONFIG.PCW_UIPARAM_DDR_DRAM_WIDTH {16 Bits} \
CONFIG.PCW_UIPARAM_DDR_ECC {Disabled} \
CONFIG.PCW_UIPARAM_DDR_ENABLE {1} \
CONFIG.PCW_UIPARAM_DDR_FREQ_MHZ {525} \
CONFIG.PCW_UIPARAM_DDR_HIGH_TEMP {Normal (0-85)} \
CONFIG.PCW_UIPARAM_DDR_MEMORY_TYPE {DDR 3} \
CONFIG.PCW_UIPARAM_DDR_PARTNO {Custom} \
CONFIG.PCW_UIPARAM_DDR_ROW_ADDR_COUNT {15} \
CONFIG.PCW_UIPARAM_DDR_SPEED_BIN {DDR3_1066F} \
CONFIG.PCW_UIPARAM_DDR_TRAIN_DATA_EYE {1} \
CONFIG.PCW_UIPARAM_DDR_TRAIN_READ_GATE {1} \
CONFIG.PCW_UIPARAM_DDR_TRAIN_WRITE_LEVEL {1} \
CONFIG.PCW_UIPARAM_DDR_T_FAW {40.0} \
CONFIG.PCW_UIPARAM_DDR_T_RAS_MIN {35.0} \
CONFIG.PCW_UIPARAM_DDR_T_RC {50.625} \
CONFIG.PCW_UIPARAM_DDR_T_RCD {13.125} \
CONFIG.PCW_UIPARAM_DDR_T_RP {13.125} \
CONFIG.PCW_UIPARAM_DDR_USE_INTERNAL_VREF {0} \
CONFIG.PCW_UIPARAM_GENERATE_SUMMARY {NA} \
CONFIG.PCW_USB0_BASEADDR {0xE0102000} \
CONFIG.PCW_USB0_HIGHADDR {0xE0102fff} \
CONFIG.PCW_USB0_PERIPHERAL_ENABLE {1} \
CONFIG.PCW_USB0_PERIPHERAL_FREQMHZ {60} \
CONFIG.PCW_USB0_RESET_ENABLE {0} \
CONFIG.PCW_USB0_RESET_IO {<Select>} \
CONFIG.PCW_USB0_USB0_IO {MIO 28 .. 39} \
CONFIG.PCW_USB1_BASEADDR {0xE0103000} \
CONFIG.PCW_USB1_HIGHADDR {0xE0103fff} \
CONFIG.PCW_USB1_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_USB1_PERIPHERAL_FREQMHZ {60} \
CONFIG.PCW_USB1_RESET_ENABLE {0} \
CONFIG.PCW_USB1_RESET_IO {<Select>} \
CONFIG.PCW_USB1_USB1_IO {<Select>} \
CONFIG.PCW_USB_RESET_ENABLE {0} \
CONFIG.PCW_USB_RESET_POLARITY {Active Low} \
CONFIG.PCW_USB_RESET_SELECT {<Select>} \
CONFIG.PCW_USE_AXI_FABRIC_IDLE {0} \
CONFIG.PCW_USE_AXI_NONSECURE {0} \
CONFIG.PCW_USE_CORESIGHT {0} \
CONFIG.PCW_USE_CROSS_TRIGGER {0} \
CONFIG.PCW_USE_CR_FABRIC {1} \
CONFIG.PCW_USE_DDR_BYPASS {0} \
CONFIG.PCW_USE_DEBUG {0} \
CONFIG.PCW_USE_DEFAULT_ACP_USER_VAL {0} \
CONFIG.PCW_USE_DMA0 {0} \
CONFIG.PCW_USE_DMA1 {0} \
CONFIG.PCW_USE_DMA2 {0} \
CONFIG.PCW_USE_DMA3 {0} \
CONFIG.PCW_USE_EXPANDED_IOP {0} \
CONFIG.PCW_USE_EXPANDED_PS_SLCR_REGISTERS {0} \
CONFIG.PCW_USE_FABRIC_INTERRUPT {1} \
CONFIG.PCW_USE_HIGH_OCM {0} \
CONFIG.PCW_USE_M_AXI_GP0 {1} \
CONFIG.PCW_USE_M_AXI_GP1 {0} \
CONFIG.PCW_USE_PROC_EVENT_BUS {0} \
CONFIG.PCW_USE_PS_SLCR_REGISTERS {0} \
CONFIG.PCW_USE_S_AXI_ACP {0} \
CONFIG.PCW_USE_S_AXI_GP0 {0} \
CONFIG.PCW_USE_S_AXI_GP1 {0} \
CONFIG.PCW_USE_S_AXI_HP0 {1} \
CONFIG.PCW_USE_S_AXI_HP1 {0} \
CONFIG.PCW_USE_S_AXI_HP2 {0} \
CONFIG.PCW_USE_S_AXI_HP3 {0} \
CONFIG.PCW_USE_TRACE {0} \
CONFIG.PCW_USE_TRACE_DATA_EDGE_DETECTOR {0} \
CONFIG.PCW_VALUE_SILVERSION {3} \
CONFIG.PCW_WDT_PERIPHERAL_CLKSRC {CPU_1X} \
CONFIG.PCW_WDT_PERIPHERAL_DIVISOR0 {1} \
CONFIG.PCW_WDT_PERIPHERAL_ENABLE {0} \
CONFIG.PCW_WDT_PERIPHERAL_FREQMHZ {133.333333} \
CONFIG.PCW_WDT_WDT_IO {<Select>} \
 ] $processing_system7_0

  # Create instance: processing_system7_0_axi_periph, and set properties
  set processing_system7_0_axi_periph [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_interconnect:2.1 processing_system7_0_axi_periph ]
  set_property -dict [ list \
   CONFIG.NUM_MI {8} \
 ] $processing_system7_0_axi_periph

  # Create instance: rgbleds_gpio, and set properties
  set rgbleds_gpio [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_gpio:2.0 rgbleds_gpio ]
  set_property -dict [ list \
CONFIG.C_ALL_OUTPUTS {1} \
CONFIG.C_GPIO_WIDTH {6} \
CONFIG.GPIO_BOARD_INTERFACE {rgb_led} \
CONFIG.USE_BOARD_FLOW {true} \
 ] $rgbleds_gpio

  # Create instance: rst_processing_system7_0_100M, and set properties
  set rst_processing_system7_0_100M [ create_bd_cell -type ip -vlnv xilinx.com:ip:proc_sys_reset:5.0 rst_processing_system7_0_100M ]

  # Create instance: swsleds_gpio, and set properties
  set swsleds_gpio [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_gpio:2.0 swsleds_gpio ]
  set_property -dict [ list \
CONFIG.C_ALL_INPUTS {1} \
CONFIG.C_ALL_OUTPUTS_2 {1} \
CONFIG.C_GPIO2_WIDTH {4} \
CONFIG.C_GPIO_WIDTH {2} \
CONFIG.C_INTERRUPT_PRESENT {1} \
CONFIG.C_IS_DUAL {1} \
CONFIG.GPIO2_BOARD_INTERFACE {leds_4bits} \
CONFIG.GPIO_BOARD_INTERFACE {sws_2bits} \
CONFIG.USE_BOARD_FLOW {true} \
 ] $swsleds_gpio

  # Create instance: system_interrupts, and set properties
  set system_interrupts [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_intc:4.1 system_interrupts ]
  set_property -dict [ list \
CONFIG.C_IRQ_CONNECTION {1} \
 ] $system_interrupts

  # Create instance: xlconcat_0, and set properties
  set xlconcat_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlconcat:2.1 xlconcat_0 ]

  # Create interface connections
  connect_bd_intf_net -intf_net AxisQueue_0_io_m_axis [get_bd_intf_pins AxisQueue_0/io_m_axis] [get_bd_intf_pins axi_dma_0/S_AXIS_S2MM]
  connect_bd_intf_net -intf_net axi_dma_0_M_AXIS_MM2S [get_bd_intf_pins AxisQueue_0/io_s_axis] [get_bd_intf_pins axi_dma_0/M_AXIS_MM2S]
  connect_bd_intf_net -intf_net axi_dma_0_M_AXI_MM2S [get_bd_intf_pins axi_dma_0/M_AXI_MM2S] [get_bd_intf_pins axi_mem_intercon/S01_AXI]
  connect_bd_intf_net -intf_net axi_dma_0_M_AXI_S2MM [get_bd_intf_pins axi_dma_0/M_AXI_S2MM] [get_bd_intf_pins axi_mem_intercon/S00_AXI]
  connect_bd_intf_net -intf_net axi_mem_intercon_M00_AXI [get_bd_intf_pins axi_mem_intercon/M00_AXI] [get_bd_intf_pins processing_system7_0/S_AXI_HP0]
  connect_bd_intf_net -intf_net btns_gpio_GPIO [get_bd_intf_ports btns_4bits] [get_bd_intf_pins btns_gpio/GPIO]
  connect_bd_intf_net -intf_net processing_system7_0_DDR [get_bd_intf_ports DDR] [get_bd_intf_pins processing_system7_0/DDR]
  connect_bd_intf_net -intf_net processing_system7_0_FIXED_IO [get_bd_intf_ports FIXED_IO] [get_bd_intf_pins processing_system7_0/FIXED_IO]
  connect_bd_intf_net -intf_net processing_system7_0_M_AXI_GP0 [get_bd_intf_pins processing_system7_0/M_AXI_GP0] [get_bd_intf_pins processing_system7_0_axi_periph/S00_AXI]
  connect_bd_intf_net -intf_net processing_system7_0_axi_periph_M00_AXI [get_bd_intf_pins btns_gpio/S_AXI] [get_bd_intf_pins processing_system7_0_axi_periph/M00_AXI]
  connect_bd_intf_net -intf_net processing_system7_0_axi_periph_M01_AXI [get_bd_intf_pins processing_system7_0_axi_periph/M01_AXI] [get_bd_intf_pins rgbleds_gpio/S_AXI]
  connect_bd_intf_net -intf_net processing_system7_0_axi_periph_M02_AXI [get_bd_intf_pins processing_system7_0_axi_periph/M02_AXI] [get_bd_intf_pins swsleds_gpio/S_AXI]
  connect_bd_intf_net -intf_net processing_system7_0_axi_periph_M03_AXI [get_bd_intf_pins processing_system7_0_axi_periph/M03_AXI] [get_bd_intf_pins system_interrupts/s_axi]
  connect_bd_intf_net -intf_net processing_system7_0_axi_periph_M04_AXI [get_bd_intf_pins axi_dma_0/S_AXI_LITE] [get_bd_intf_pins processing_system7_0_axi_periph/M04_AXI]
  connect_bd_intf_net -intf_net processing_system7_0_axi_periph_M05_AXI [get_bd_intf_pins AxiLiteReadOneConstant_0/io] [get_bd_intf_pins processing_system7_0_axi_periph/M05_AXI]
  connect_bd_intf_net -intf_net processing_system7_0_axi_periph_M06_AXI [get_bd_intf_pins AxiLiteReadDifferentConstants_0/io] [get_bd_intf_pins processing_system7_0_axi_periph/M06_AXI]
  connect_bd_intf_net -intf_net processing_system7_0_axi_periph_M07_AXI [get_bd_intf_pins AxiLiteLoopBack_0/io] [get_bd_intf_pins processing_system7_0_axi_periph/M07_AXI]
  connect_bd_intf_net -intf_net rgbled_gpio_GPIO [get_bd_intf_ports rgb_led] [get_bd_intf_pins rgbleds_gpio/GPIO]
  connect_bd_intf_net -intf_net swsleds_gpio_GPIO [get_bd_intf_ports sws_2bits] [get_bd_intf_pins swsleds_gpio/GPIO]
  connect_bd_intf_net -intf_net swsleds_gpio_GPIO2 [get_bd_intf_ports leds_4bits] [get_bd_intf_pins swsleds_gpio/GPIO2]

  # Create port connections
  connect_bd_net -net axi_dma_0_mm2s_introut [get_bd_pins axi_dma_0/mm2s_introut] [get_bd_pins xlconcat_0/In0]
  connect_bd_net -net axi_dma_0_s2mm_introut [get_bd_pins axi_dma_0/s2mm_introut] [get_bd_pins xlconcat_0/In1]
  connect_bd_net -net inv_Res [get_bd_pins AxisQueue_0/reset] [get_bd_pins inv/Res]
  connect_bd_net -net iop_interrupts_irq [get_bd_pins processing_system7_0/IRQ_F2P] [get_bd_pins system_interrupts/irq]
  connect_bd_net -net processing_system7_0_FCLK_CLK0 [get_bd_pins AxiLiteLoopBack_0/clock] [get_bd_pins AxiLiteReadDifferentConstants_0/clock] [get_bd_pins AxiLiteReadOneConstant_0/clock] [get_bd_pins AxisQueue_0/clock] [get_bd_pins axi_dma_0/m_axi_mm2s_aclk] [get_bd_pins axi_dma_0/m_axi_s2mm_aclk] [get_bd_pins axi_dma_0/s_axi_lite_aclk] [get_bd_pins axi_mem_intercon/ACLK] [get_bd_pins axi_mem_intercon/M00_ACLK] [get_bd_pins axi_mem_intercon/S00_ACLK] [get_bd_pins axi_mem_intercon/S01_ACLK] [get_bd_pins btns_gpio/s_axi_aclk] [get_bd_pins processing_system7_0/FCLK_CLK0] [get_bd_pins processing_system7_0/M_AXI_GP0_ACLK] [get_bd_pins processing_system7_0/S_AXI_HP0_ACLK] [get_bd_pins processing_system7_0_axi_periph/ACLK] [get_bd_pins processing_system7_0_axi_periph/M00_ACLK] [get_bd_pins processing_system7_0_axi_periph/M01_ACLK] [get_bd_pins processing_system7_0_axi_periph/M02_ACLK] [get_bd_pins processing_system7_0_axi_periph/M03_ACLK] [get_bd_pins processing_system7_0_axi_periph/M04_ACLK] [get_bd_pins processing_system7_0_axi_periph/M05_ACLK] [get_bd_pins processing_system7_0_axi_periph/M06_ACLK] [get_bd_pins processing_system7_0_axi_periph/M07_ACLK] [get_bd_pins processing_system7_0_axi_periph/S00_ACLK] [get_bd_pins rgbleds_gpio/s_axi_aclk] [get_bd_pins rst_processing_system7_0_100M/slowest_sync_clk] [get_bd_pins swsleds_gpio/s_axi_aclk] [get_bd_pins system_interrupts/s_axi_aclk]
  connect_bd_net -net processing_system7_0_FCLK_RESET0_N [get_bd_pins processing_system7_0/FCLK_RESET0_N] [get_bd_pins rst_processing_system7_0_100M/ext_reset_in]
  connect_bd_net -net rst_processing_system7_0_100M_interconnect_aresetn [get_bd_pins axi_mem_intercon/ARESETN] [get_bd_pins processing_system7_0_axi_periph/ARESETN] [get_bd_pins rst_processing_system7_0_100M/interconnect_aresetn]
  connect_bd_net -net rst_processing_system7_0_100M_peripheral_aresetn [get_bd_pins axi_dma_0/axi_resetn] [get_bd_pins axi_mem_intercon/M00_ARESETN] [get_bd_pins axi_mem_intercon/S00_ARESETN] [get_bd_pins axi_mem_intercon/S01_ARESETN] [get_bd_pins btns_gpio/s_axi_aresetn] [get_bd_pins inv/Op1] [get_bd_pins processing_system7_0_axi_periph/M00_ARESETN] [get_bd_pins processing_system7_0_axi_periph/M01_ARESETN] [get_bd_pins processing_system7_0_axi_periph/M02_ARESETN] [get_bd_pins processing_system7_0_axi_periph/M03_ARESETN] [get_bd_pins processing_system7_0_axi_periph/M04_ARESETN] [get_bd_pins processing_system7_0_axi_periph/M05_ARESETN] [get_bd_pins processing_system7_0_axi_periph/M06_ARESETN] [get_bd_pins processing_system7_0_axi_periph/M07_ARESETN] [get_bd_pins processing_system7_0_axi_periph/S00_ARESETN] [get_bd_pins rgbleds_gpio/s_axi_aresetn] [get_bd_pins rst_processing_system7_0_100M/peripheral_aresetn] [get_bd_pins swsleds_gpio/s_axi_aresetn] [get_bd_pins system_interrupts/s_axi_aresetn]
  connect_bd_net -net rst_processing_system7_0_100M_peripheral_reset [get_bd_pins AxiLiteLoopBack_0/reset] [get_bd_pins AxiLiteReadDifferentConstants_0/reset] [get_bd_pins AxiLiteReadOneConstant_0/reset] [get_bd_pins rst_processing_system7_0_100M/peripheral_reset]
  connect_bd_net -net xlconcat_0_dout [get_bd_pins system_interrupts/intr] [get_bd_pins xlconcat_0/dout]

  # Create address segments
  create_bd_addr_seg -range 0x20000000 -offset 0x00000000 [get_bd_addr_spaces axi_dma_0/Data_MM2S] [get_bd_addr_segs processing_system7_0/S_AXI_HP0/HP0_DDR_LOWOCM] SEG_processing_system7_0_HP0_DDR_LOWOCM
  create_bd_addr_seg -range 0x20000000 -offset 0x00000000 [get_bd_addr_spaces axi_dma_0/Data_S2MM] [get_bd_addr_segs processing_system7_0/S_AXI_HP0/HP0_DDR_LOWOCM] SEG_processing_system7_0_HP0_DDR_LOWOCM
  create_bd_addr_seg -range 0x00010000 -offset 0x43C20000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs AxiLiteLoopBack_0/io/reg0] SEG_AxiLiteLoopBack_0_reg0
  create_bd_addr_seg -range 0x00010000 -offset 0x43C10000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs AxiLiteReadDifferentConstants_0/io/reg0] SEG_AxiLiteReadDifferentConstants_0_reg0
  create_bd_addr_seg -range 0x00010000 -offset 0x43C00000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs AxiLiteReadOneConstant_0/io/reg0] SEG_AxiLiteReadOneConstant_0_reg0
  create_bd_addr_seg -range 0x00010000 -offset 0x40000000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs axi_dma_0/S_AXI_LITE/Reg] SEG_axi_dma_0_Reg
  create_bd_addr_seg -range 0x00010000 -offset 0x41200000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs btns_gpio/S_AXI/Reg] SEG_btns_gpio_Reg
  create_bd_addr_seg -range 0x00010000 -offset 0x41210000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs rgbleds_gpio/S_AXI/Reg] SEG_rgbleds_gpio_Reg
  create_bd_addr_seg -range 0x00010000 -offset 0x41220000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs swsleds_gpio/S_AXI/Reg] SEG_swsleds_gpio_Reg
  create_bd_addr_seg -range 0x00010000 -offset 0x41800000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs system_interrupts/S_AXI/Reg] SEG_system_interrupts_Reg


  # Restore current instance
  current_bd_instance $oldCurInst

  save_bd_design
}
# End of create_root_design()


##################################################################
# MAIN FLOW
##################################################################

create_root_design ""

# Additional steps to get to bitstream
# from https://github.com/Xilinx/PYNQ and https://github.com/PeterOgden/overlay_tutorial
# generate toplevel
add_files -norecurse [make_wrapper -files [get_files "[current_bd_design].bd"] -top]
update_compile_order -fileset sources_1
set_property top system_wrapper [current_fileset]