values.yaml

# Default values for helm-ipfs-cluster.
# This is a YAML-formatted file.
# Declare variables to be passed into your templates.

replicaCount: 1

p2pNodePort:
  enabled: true
  nodePort: 32000
  initContainer:
    image:
      # -- Container image to fetch nodeport information
      repository: lachlanevenson/k8s-kubectl
      # -- Container tag
      tag: v1.25.4
      # -- Container pull policy
      pullPolicy: IfNotPresent

cluster:
  image:
    repository: ipfs/ipfs-cluster
    pullPolicy: IfNotPresent
    tag: "latest"
  imagePullSecrets: []
  nameOverride: ""
  podSecurityContext: {}
    # fsGroup: 2000
  # -- Additional env variables
  extraEnv: []
  resources: {}
    # We usually recommend not to specify default resources and to leave this as a conscious
    # choice for the user. This also increases chances charts run on environments with little
    # resources, such as Minikube. If you do want to specify resources, uncomment the following
    # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
    # limits:
    #   cpu: 100m
    #   memory: 128Mi
    # requests:
    #   cpu: 100m
    #   memory: 128Mi

  nodeSelector: {}

  tolerations: []

  affinity: {}

  storage:
    storageClassName: ""
    volumeSize: ""  # "1Gi"

  service:
    type: ""

ipfs:
  image:
    repository: ipfs/kubo
    pullPolicy: IfNotPresent
    tag: "latest"
  imagePullSecrets: []
  nameOverride: ""
  podSecurityContext: {}
    # fsGroup: 2000
  initScripts:
    # -- Scripts that will run in an init container before the ipfs node starts. This is useful to setup some configuration parameters
    # @default -- See `values.yaml`
    001-peers.sh: |-
      #!/bin/sh
      set -xe
      ipfs config Peering.Peers "[ { \"ID\": \"QmcFf2FH3CEgTNHeMRGhN7HNHU1EXAxoEk6EFuSyXCsvRE\", \"Addrs\": [ \"/dnsaddr/node-1.ingress.cloudflare-ipfs.com\" ] }, { \"ID\": \"QmcFmLd5ySfk2WZuJ1mfSWLDjdmHZq7rSAua4GoeSQfs1z\", \"Addrs\": [ \"/dnsaddr/node-2.ingress.cloudflare-ipfs.com\" ] }, { \"ID\": \"QmcfFmzSDVbwexQ9Au2pt5YEXHK5xajwgaU6PpkbLWerMa\", \"Addrs\": [ \"/dnsaddr/node-3.ingress.cloudflare-ipfs.com\" ] }, { \"ID\": \"QmcfJeB3Js1FG7T8YaZATEiaHqNKVdQfybYYkbT1knUswx\", \"Addrs\": [ \"/dnsaddr/node-4.ingress.cloudflare-ipfs.com\" ] }, { \"ID\": \"QmcfVvzK4tMdFmpJjEKDUoqRgP4W9FnmJoziYX5GXJJ8eZ\", \"Addrs\": [ \"/dnsaddr/node-5.ingress.cloudflare-ipfs.com\" ] }, { \"ID\": \"QmcfZD3VKrUxyP9BbyUnZDpbqDnT7cQ4WjPP8TRLXaoE7G\", \"Addrs\": [ \"/dnsaddr/node-6.ingress.cloudflare-ipfs.com\" ] }, { \"ID\": \"QmcfZP2LuW4jxviTeG8fi28qjnZScACb8PEgHAc17ZEri3\", \"Addrs\": [ \"/dnsaddr/node-7.ingress.cloudflare-ipfs.com\" ] }, { \"ID\": \"QmcfgsJsMtx6qJb74akCw1M24X1zFwgGo11h1cuhwQjtJP\", \"Addrs\": [ \"/dnsaddr/node-8.ingress.cloudflare-ipfs.com\" ] }, { \"ID\": \"Qmcfr2FC7pFzJbTSDfYaSy1J8Uuy8ccGLeLyqJCKJvTHMi\", \"Addrs\": [ \"/dnsaddr/node-9.ingress.cloudflare-ipfs.com\" ] }, { \"ID\": \"QmcfR3V5YAtHBzxVACWCzXTt26SyEkxdwhGJ6875A8BuWx\", \"Addrs\": [ \"/dnsaddr/node-10.ingress.cloudflare-ipfs.com\" ] }, { \"ID\": \"Qmcfuo1TM9uUiJp6dTbm915Rf1aTqm3a3dnmCdDQLHgvL5\", \"Addrs\": [ \"/dnsaddr/node-11.ingress.cloudflare-ipfs.com\" ] }, { \"ID\": \"QmcfV2sg9zaq7UUHVCGuSvT2M2rnLBAPsiE79vVyK3Cuev\", \"Addrs\": [ \"/dnsaddr/node-12.ingress.cloudflare-ipfs.com\" ] } ]" --json
    # 002-gc.sh: |-
    #   #!/bin/sh
    #   set -xe
    #   ipfs config Datastore.StorageGCWatermark 90 --json
    #   ipfs config Datastore.StorageMax "50GB"
    #   ipfs config Datastore.GCPeriod "6h"
  # -- Command replacement for the container
  customCommand: []
  # -- Additional args for the container
  extraArgs: []
  # -- Additional volume mounts
  extraVolumeMounts: []
  # -- Additional volumes
  extraVolumes: []
  # -- Additional env variables
  extraEnv: []
  # -- Additional init containers
  initContainers: []
  resources: {}
    # We usually recommend not to specify default resources and to leave this as a conscious
    # choice for the user. This also increases chances charts run on environments with little
    # resources, such as Minikube. If you do want to specify resources, uncomment the following
    # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
    # limits:
    #   cpu: 100m
    #   memory: 128Mi
    # requests:
    #   cpu: 100m
    #   memory: 128Mi

  nodeSelector: {}

  tolerations: []

  affinity: {}

  storage:
    storageClassName: ""
    volumeSize: ""  # "1Gi"

  service:
    type: ClusterIP

fullnameOverride: ""

sharedSecret: ""

serviceAccount:
  # Specifies whether a service account should be created
  create: true
  # Annotations to add to the service account
  annotations: {}
  # The name of the service account to use.
  # If not set and create is true, a name is generated using the fullname template
  name: ""

podAnnotations: {}

securityContext: {}
  # capabilities:
  #   drop:
  #   - ALL
  # readOnlyRootFilesystem: true
  # runAsNonRoot: true
  # runAsUser: 1000

# `service.type` may be overridden by `cluster.service.type` and/or `ipfs.sercive.type`.
service:
  type: ClusterIP

ingress:
  enabled: false
  className: ""
  annotations: {}
    # kubernetes.io/ingress.class: nginx
    # kubernetes.io/tls-acme: "true"
  hosts:
    - host: chart-example.local
      paths:
        - path: /
          pathType: ImplementationSpecific
  tls: []
  #  - secretName: chart-example-tls
  #    hosts:
  #      - chart-example.local


rbac:
  # -- Specifies whether RBAC resources are to be created
  create: true
  # -- Required ClusterRole rules
  # @default -- See `values.yaml`
  clusterRules:
     # Required to obtain the nodes external IP
    - apiGroups: [""]
      resources:
      - "nodes"
      verbs:
      - "get"
      - "list"
      - "watch"
  # -- Required ClusterRole rules
  # @default -- See `values.yaml`
  rules:
    # Required to get information about the serices nodePort.
    - apiGroups: [""]
      resources:
      - "services"
      verbs:
      - "get"
      - "list"
      - "watch"