Simple test for RNode settings for use in Reticulum
Usage:
Configure Reticulum as required - disable all but tested interface
Start Receiver.py on receiving machine. Note "Server address: " line. This is your address.
Start Sender with "python3 Sender.py xxx" where xxx is the address noted above.
When Sender reports complete, press enter on receiving unit.
Notes:
- You may need to use "python" instead of "python3" depending on your system
- The address does not include <>
- If the "server address" line does not appear, set your Reticulum log level to at least 4
- Increasing the log level to 7 on Receiver will show received path requests