Logs/Data running, Value recording "stop" in between"? #3096
Unanswered
numberdotone
asked this question in
General
Replies: 2 comments
-
https://jomjol.github.io/AI-on-the-edge-device-docs/FAQs/#pre-value |
Beta Was this translation helpful? Give feedback.
0 replies
-
I did RTFM (which by the way is fabulous as the whole project). And checked the settings carefully (during installation and after the errors occurs). |
Beta Was this translation helpful? Give feedback.
0 replies
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
-
The Problem
The data file is stopping to record data at 06:54:
2024-05-26T06:48:04+0200,main,01104.9170,,1107.0092,,0.0018,Neg. Rate - Read: - Raw: 01104.9170 - Pre: 1107.0092 ,0.1,1.1,1.1,0.2,4.4,9.5,1.5,7.5,0.6
2024-05-26T06:51:04+0200,main,01107.2471,,1107.0092,,0.0018,Rate too high - Read: 1107.2471 - Pre: 1107.0092 - Rate: 0.2379,10.0,1.0,0.9,10.0,7.0,2.3,5.1,7.3,1.2
2024-05-26T06:54:04+0200,main,01107.0271,1107.0271,1107.0271,0.005967,0.0179,no error,0.0,1.1,1.1,0.3,7.3,9.8,2.7,7.7,1.1
2024-05-26T06:57:04+0200,main,01107.2471,,1107.0271,,0.0179,Rate too high - Read: 1107.2471 - Pre: 1107.0271 - Rate: 0.2200,10.0,1.0,0.9,9.9,7.0,2.4,5.2,7.3,1.2
2024-05-26T07:00:04+0200,main,01107.2471,,1107.0271,,0.0179,Rate too high - Read: 1107.2471 - Pre: 1107.0271 - Rate: 0.2200,10.0,1.0,1.0,10.0,7.0,2.5,5.0,7.3,1.2
...
but is still creating values until "now":
[2d00h39m49s] 2024-05-26T21:18:34 [POSTPROC] main: Raw: 01107.5183, Value: , Status: Rate too high - Read: 1107.5183 - Pre: 1107.0271 - Rate: 0.4912
[2d00h42m49s] 2024-05-26T21:21:34 [POSTPROC] main: Raw: 01107.5184, Value: , Status: Rate too high - Read: 1107.5184 - Pre: 1107.0271 - Rate: 0.4913
[2d00h45m49s] 2024-05-26T21:24:34 [POSTPROC] main: Raw: 01107.5185, Value: , Status: Rate too high - Read: 1107.5185 - Pre: 1107.0271 - Rate: 0.4914
[2d00h48m49s] 2024-05-26T21:27:34 [POSTPROC] main: Raw: 01107.5186, Value: , Status: Rate too high - Read: 1107.5186 - Pre: 1107.0271 - Rate: 0.4915
[2d00h51m49s] 2024-05-26T21:30:34 [POSTPROC] main: Raw: 01107.5187, Value: , Status: Rate too high - Read: 1107.5187 - Pre: 1107.0271 - Rate: 0.4916
[2d00h54m49s] 2024-05-26T21:33:34 [POSTPROC] main: Raw: 01107.5188, Value: , Status: Rate too high - Read: 1107.5188 - Pre: 1107.0271 - Rate: 0.4917
[2d00h57m49s] 2024-05-26T21:36:34 [POSTPROC] main: Raw: 01107.5188, Value: , Status: Rate too high - Read: 1107.5188 - Pre: 1107.0271 - Rate: 0.4917
Data after 2024-05-26T06:54:04 is not shown (and not transferred via MQTT)
Version
Firmware version: Release: v15.7.0 (Commit: 0d0b018+)
Logfile
Expected Behavior
Should be shown completely
Screenshots
No response
Additional Context
No response
Beta Was this translation helpful? Give feedback.
All reactions