pod 'hyperswitch-sdk-ios'pod 'hyperswitch-sdk-ios/scancard'
pod 'hyperswitch-sdk-ios', :subspecs => ['subspec1', 'subspec2']This repository hosts the essential components of the Hyperswitch SDK iOS, it is a submodule repo for hyperswitch-client-core, in order to complete the setup please clone hyperswitch-client-core and follow the instruction given in the README.
The following table outlines the available configuration variables, their values, and descriptions:
| Key | Value | Description |
|---|---|---|
HyperswitchSource |
LocalHosted |
Load the bundle from the Metro server |
HyperswitchSource |
LocalBundle |
Load the bundle from a pre-compiled local bundle |
HyperswitchSource defaults to LocalHosted.
Note: To run the SDK on a physical iOS device, ensure that your Mac and the iOS device are connected to the same Wi-Fi network. Additionally, you'll need to provide your Mac's IP address as the value for the HyperswitchSourceIP key, as shown in the following table:
| Key | Value |
|---|---|
HyperswitchSourceIP |
10.0.0.1 |
Replace 10.0.0.1 with your actual Mac's IP address.
During local development, you may need to set specific variables to configure the SDK's behavior. You can set these variables using Xcode, command line interface (CLI), or any text editor.
Project > Targets > Info Custom iOS Target Properties
Alternatively, you can leverage the plutil command to modify the Info.plist file directly from the terminal. For example, to set the HyperswitchSource variable, execute the following command:
plutil -replace HyperswitchSource -string "LocalBundle" Info.plistInfo.plist is present in hyperswitch directory.
If you prefer a more manual approach, you can open the Info.plist file in a text editor and add or modify the required keys and their corresponding values. For instance:
<key>HyperswitchSource</key>
<string>LocalHosted</string>
<key>HyperswitchSourceIP</key>
<string>10.0.0.1</string>
Get started with our iOS 📚 integration guides