diff --git a/docs/admin/index.md b/docs/admin/index.md
index 4df7fb3375d22..a573ec2e5de4b 100644
--- a/docs/admin/index.md
+++ b/docs/admin/index.md
@@ -79,4 +79,6 @@ project](/docs/admin/salt).
 
 * **Authorization** [authorization](/docs/admin/authorization)
 
-* **Admission Controllers** [admission_controllers](/docs/admin/admission-controllers)
\ No newline at end of file
+* **Admission Controllers** [admission_controllers](/docs/admin/admission-controllers)
+
+* **Sysctls** [sysctls](/docs/admin/sysctls.md)
diff --git a/docs/admin/sysctls.md b/docs/admin/sysctls.md
new file mode 100644
index 0000000000000..dc62b8c3d10eb
--- /dev/null
+++ b/docs/admin/sysctls.md
@@ -0,0 +1,122 @@
+---
+assignees:
+- sttts
+
+---
+
+* TOC
+{:toc}
+
+This document describes how sysctls are used within a Kubernetes cluster.
+
+## What is a _Sysctl_?
+
+In Linux, the sysctl interface allows an administrator to modify kernel
+parameters at runtime. Parameters are available via the `/proc/sys/` virtual
+process file system. The parameters cover various subsystems such as:
+
+- kernel (common prefix: `kernel.`)
+- networking (common prefix: `net.`)
+- virtual memory (common prefix: `vm.`)
+- MDADM (common prefix: `dev.`)
+- More subsystems are described in [Kernel docs](https://www.kernel.org/doc/Documentation/sysctl/README).
+
+To get a list of all parameters, you can run
+
+```
+$ sudo sysctl -a
+```
+
+## Namespaced vs. Node-Level Sysctls
+
+A number of sysctls are _namespaced_ in today's Linux kernels. This means that
+they can be set independently for each pod on a node. Being namespaced is a
+requirement for sysctls to be accessible in a pod context within Kubernetes.
+
+The following sysctls are known to be _namespaced_:
+
+- `kernel.shm*`,
+- `kernel.msg*`,
+- `kernel.sem`,
+- `fs.mqueue.*`,
+- `net.*`.
+
+Sysctls which are not namespaced are called _node-level_ and must be set
+manually by the cluster admin, either by means of the underlying Linux
+distribution of the nodes (e.g. via `/etc/sysctls.conf`) or using a DaemonSet
+with privileged containers.
+
+**Note**: it is good practice to consider nodes with special sysctl settings as
+_tainted_ within a cluster, and only schedule pods onto them which need those
+sysctl settings. It is suggested to use the Kubernetes [_taints and toleration_
+feature](/docs/user-guide/kubectl/kubectl_taint.md) to implement this.
+
+## Safe vs. Unsafe Sysctls
+
+Sysctls are grouped into _safe_  and _unsafe_ sysctls. In addition to proper
+namespacing a _safe_ sysctl must be properly _isolated_ between pods on the same
+node. This means that setting a _safe_ sysctl for one pod
+
+- must not have any influence on any other pod on the node
+- must not allow to harm the node's health
+- must not allow to gain CPU or memory resources outside of the resource limits
+  of a pod.
+
+By far, most of the _namespaced_ sysctls are not necessarily considered _safe_.
+
+For Kubernetes 1.4, the following sysctls are supported in the _safe_ set:
+
+- `kernel.shm_rmid_forced`,
+- `net.ipv4.ip_local_port_range`,
+- `net.ipv4.tcp_syncookies`.
+
+This list will be extended in future Kubernetes versions when the kubelet
+supports better isolation mechanisms.
+
+All _safe_ sysctls are enabled by default.
+
+All _unsafe_ sysctls are disabled by default and must be allowed manually by the
+cluster admin on a per-node basis. Pods with disabled unsafe sysctls will be
+scheduled, but will fail to launch.
+
+**Warning**: Due to their nature of being _unsafe_, the use of _unsafe_ sysctls
+is at-your-own-risk and can lead to severe problems like wrong behavior of
+containers, resource shortage or complete breakage of a node.
+
+## Enabling Unsafe Sysctls
+
+With the warning above in mind, the cluster admin can allow certain _unsafe_
+sysctls for very special situations like e.g. high-performance or real-time
+application tuning. _Unsafe_ sysctls are enabled on a node-by-node basis with a
+flag of the kubelet, e.g.:
+
+```shell
+$ kubelet --experimental-allowed-unsafe-sysctls 'kernel.msg*,net.ipv4.route.min_pmtu' ...
+```
+
+Only _namespaced_ sysctls can be enabled this way.
+
+## Setting Sysctls for a Pod
+
+The sysctl feature is an alpha API in Kubernetes 1.4. Therefore, sysctls are set
+using annotations on pods. They apply to all containers in the same pod.
+
+Here is an example, with different annotations for _safe_ and _unsafe_ sysctls:
+
+```yaml
+apiVersion: v1
+kind: Pod
+metadata:
+  name: sysctl-example
+  annotations:
+    security.alpha.kubernetes.io/sysctls: kernel.shm_rmid_forced=1
+    security.alpha.kubernetes.io/unsafe-sysctls: net.ipv4.route.min_pmtu=1000,kernel.msgmax=1 2 3
+spec:
+  ...
+```
+
+**Note**: a pod with the _unsafe_ sysctls specified above will fail to launch on
+any node which has not enabled those two _unsafe_ sysctls explicitly. As with
+_node-level_ sysctls it is recommended to use [_taints and toleration_
+feature](/docs/user-guide/kubectl/kubectl_taint.md) or [labels on nodes](/docs
+/user-guide/labels.md) to schedule those pods onto the right nodes.