Charging‐Cable

About USB-C Charging

The USB-C charging function is described by Quansheng as an emergency charging function. This is due to the fact that the device is not 100% charged via USB for security reasons. However, the actual charge is only a few percent below the maximum charge - no problem from my point of view.

1. USB-A to USB-C Cable These cables always apply 5 V charging voltage

2. USB-C chargers, mostly older ones that are only labeled with 5V. USB-C PD that also handle other voltages (9V, <12V>,15V, 20V) only work with the HardwareMod under point 3.

3. USB-C PD with Hardware-Mod see
A very difficult modification, it is better to use the options before.

https://github.com/ludwich66/Quansheng_UV-K5_Wiki/wiki/Hardware_Mods#2-add-possiblity-to-use-usb-pd-cable-usb-c-to-usb-c--or-usb-a-to-usb-c-cable