Hidden
- Cheat code for Portable Radio CPS V1.0.38 Windows-Program
Show special submenu "Advance para"
to show: type qs975gcms
to hide: type rmgcms
(found by @EDB88320)
Add possiblity to use USB-PD-Cable (USB-C-to-USB-C) or USB-A-to-USB-C-Cable
| USB-C Port | USB-C | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Soldersite | GND | Vbus | CC | SBU | bD- | aD+ | aD- | bD- | CC | SBU | Vbus | GND |
| ▮ ▮ | ▮ ▮ | ▮ | ▮ | ▮ | ▮ | ▮ | ▮ | ▮ | ▮ | ▮ ▮ | ▮ ▮ | |
| ┃ | ┃ | ┃ | ||||||||||
| ┃ | 5,1kΩ | 5,1kΩ | ||||||||||
| ┃ | ┃ | ┃ | ||||||||||
| ┗ | ━ | ┻ | ━━ | ━ | ━ | ━ | ━ | ┛ |
Insert 2 resistors of 5.1 kΩ each from ground to the CC pins (A5 / B5). This hack requires a good eye and good nerves ;-)
Wiring the two configuration pins CC (Pin3 / Pin10 with 5.1kΩ signals the PD charger that it can apply 5V. Without this resistor-combination, no voltage is applied.