Programming Cable

To program the radio, you need a Kennwood cable with an integrated USB-SERIAL converter.

Please leave information about operating system / driver / UV-K5 family problems.

Manufacturer	Chiptyp	Class VCP
www.wch-ic.com	CH340/CH341	USB to UART
www.silabs.com	CP210x	USB to UART Bridge
ftdichip.com/drivers/vcp-drivers/	FT232x	Virtual COM port (VCP)
www.prolific.com.tw/US/	PL2303	Virtual COM port (VCP)

Please leave information about operating system / driver / UV-K5 family problems.

PTT-Button = Switch between GND and PTT (S to W) Speaker = (T, S), 8Ω on my Baofangdevice Micro = (V, W)