diff --git a/src/Power.cpp b/src/Power.cpp
index dc8a43d46e..daec82407a 100644
--- a/src/Power.cpp
+++ b/src/Power.cpp
@@ -418,11 +418,6 @@ bool Power::setup()
 
 void Power::shutdown()
 {
-    screen->setOn(false);
-#if defined(USE_EINK) && defined(PIN_EINK_EN)
-    digitalWrite(PIN_EINK_EN, LOW); // power off backlight first
-#endif
-
     LOG_INFO("Shutting down\n");
 
 #ifdef HAS_PMU
diff --git a/src/graphics/Screen.cpp b/src/graphics/Screen.cpp
index fb27e3c016..073819e2f0 100644
--- a/src/graphics/Screen.cpp
+++ b/src/graphics/Screen.cpp
@@ -961,6 +961,9 @@ void Screen::doDeepSleep()
     static const int sleepFrameCount = sizeof(sleepFrames) / sizeof(sleepFrames[0]);
     ui->setFrames(sleepFrames, sleepFrameCount);
     ui->update();
+#ifdef PIN_EINK_EN
+    digitalWrite(PIN_EINK_EN, LOW); // power off backlight
+#endif
 #endif
     setOn(false);
 }
diff --git a/src/sleep.cpp b/src/sleep.cpp
index 464486d00c..c48003acf8 100644
--- a/src/sleep.cpp
+++ b/src/sleep.cpp
@@ -192,6 +192,12 @@ void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false)
 
     nodeDB.saveToDisk();
 
+#ifdef TTGO_T_ECHO
+#ifdef PIN_EINK_PWR_ON
+    pinMode(PIN_EINK_PWR_ON, INPUT); // power off peripherals
+#endif
+#endif
+
     // Kill GPS power completely (even if previously we just had it in sleep mode)
     if (gps)
         gps->setGPSPower(false, false, 0);
diff --git a/variants/rak10701/variant.h b/variants/rak10701/variant.h
index 5ff12a7de0..d15149248d 100644
--- a/variants/rak10701/variant.h
+++ b/variants/rak10701/variant.h
@@ -133,10 +133,6 @@ static const uint8_t SCK = PIN_SPI_SCK;
 #define PIN_EINK_SCLK (0 + 3)
 #define PIN_EINK_MOSI (0 + 30) // also called SDI
 
-// Controls power for the eink display - Board power is enabled either by VBUS from USB or the CPU asserting PWR_ON
-// FIXME - I think this is actually just the board power enable - it enables power to the CPU also
-// #define PIN_EINK_PWR_ON (-1)
-
 // #define USE_EINK
 
 // RAKRGB
diff --git a/variants/rak4631/variant.h b/variants/rak4631/variant.h
index cc18a901f6..e4116e42da 100644
--- a/variants/rak4631/variant.h
+++ b/variants/rak4631/variant.h
@@ -133,10 +133,6 @@ static const uint8_t SCK = PIN_SPI_SCK;
 #define PIN_EINK_SCLK (0 + 3)
 #define PIN_EINK_MOSI (0 + 30) // also called SDI
 
-// Controls power for the eink display - Board power is enabled either by VBUS from USB or the CPU asserting PWR_ON
-// FIXME - I think this is actually just the board power enable - it enables power to the CPU also
-// #define PIN_EINK_PWR_ON (-1)
-
 // #define USE_EINK
 
 // RAKRGB
diff --git a/variants/rak4631_epaper/variant.h b/variants/rak4631_epaper/variant.h
index d8a5e55977..b1bd84d217 100644
--- a/variants/rak4631_epaper/variant.h
+++ b/variants/rak4631_epaper/variant.h
@@ -133,10 +133,6 @@ static const uint8_t SCK = PIN_SPI_SCK;
 #define PIN_EINK_SCLK (0 + 3)
 #define PIN_EINK_MOSI (0 + 30) // also called SDI
 
-// Controls power for the eink display - Board power is enabled either by VBUS from USB or the CPU asserting PWR_ON
-// FIXME - I think this is actually just the board power enable - it enables power to the CPU also
-// #define PIN_EINK_PWR_ON (-1)
-
 #define USE_EINK
 
 // RAKRGB
diff --git a/variants/rak4631_epaper_onrxtx/variant.h b/variants/rak4631_epaper_onrxtx/variant.h
index 411e3eb171..ec53ebd33b 100644
--- a/variants/rak4631_epaper_onrxtx/variant.h
+++ b/variants/rak4631_epaper_onrxtx/variant.h
@@ -119,10 +119,6 @@ static const uint8_t SCK = PIN_SPI_SCK;
 #define PIN_EINK_SCLK (0 + 14) // SCL
 #define PIN_EINK_MOSI (0 + 13) // SDA
 
-// Controls power for the eink display - Board power is enabled either by VBUS from USB or the CPU asserting PWR_ON
-// FIXME - I think this is actually just the board power enable - it enables power to the CPU also
-// #define PIN_EINK_PWR_ON (-1)
-
 // RAKRGB
 #define HAS_NCP5623
 
diff --git a/variants/t-echo/variant.h b/variants/t-echo/variant.h
index 345091c2fa..cf56cf0b57 100644
--- a/variants/t-echo/variant.h
+++ b/variants/t-echo/variant.h
@@ -155,8 +155,7 @@ External serial flash WP25R1635FZUIL0
 #define PIN_EINK_SCLK (0 + 31)
 #define PIN_EINK_MOSI (0 + 29) // also called SDI
 
-// Controls power for the eink display - Board power is enabled either by VBUS from USB or the CPU asserting PWR_ON
-// FIXME - I think this is actually just the board power enable - it enables power to the CPU also
+// Controls power for all peripherals (eink + GPS + LoRa + Sensor)
 #define PIN_EINK_PWR_ON (0 + 12)
 
 #define USE_EINK