diff --git a/src/gps/GPS.cpp b/src/gps/GPS.cpp
index 7d4f41a55e..df1d40fdf9 100644
--- a/src/gps/GPS.cpp
+++ b/src/gps/GPS.cpp
@@ -1278,7 +1278,7 @@ bool GPS::lookForLocation()
 
 #ifndef TINYGPS_OPTION_NO_STATISTICS
     if (reader.failedChecksum() > lastChecksumFailCount) {
-        LOG_WARN("Warning, %u new GPS checksum failures, for a total of %u.\n", reader.failedChecksum() - lastChecksumFailCount,
+        LOG_WARN("%u new GPS checksum failures, for a total of %u.\n", reader.failedChecksum() - lastChecksumFailCount,
                  reader.failedChecksum());
         lastChecksumFailCount = reader.failedChecksum();
     }
diff --git a/src/main.cpp b/src/main.cpp
index fcd8d7f014..86e682abb0 100644
--- a/src/main.cpp
+++ b/src/main.cpp
@@ -644,7 +644,7 @@ void setup()
 #else
     // ESP32
     SPI.begin(LORA_SCK, LORA_MISO, LORA_MOSI, LORA_CS);
-    LOG_WARN("SPI.begin(SCK=%d, MISO=%d, MOSI=%d, NSS=%d)\n", LORA_SCK, LORA_MISO, LORA_MOSI, LORA_CS);
+    LOG_DEBUG("SPI.begin(SCK=%d, MISO=%d, MOSI=%d, NSS=%d)\n", LORA_SCK, LORA_MISO, LORA_MOSI, LORA_CS);
     SPI.setFrequency(4000000);
 #endif
 
diff --git a/src/mesh/MeshService.cpp b/src/mesh/MeshService.cpp
index 31eb082ec4..2df5d57976 100644
--- a/src/mesh/MeshService.cpp
+++ b/src/mesh/MeshService.cpp
@@ -359,7 +359,7 @@ int MeshService::onGPSChanged(const meshtastic::GPSStatus *newStatus)
         LOG_DEBUG("onGPSchanged() - lost validLocation\n");
 #endif
     }
-    // Used fixed position if configured regalrdless of GPS lock
+    // Used fixed position if configured regardless of GPS lock
     if (config.position.fixed_position) {
         LOG_WARN("Using fixed position\n");
         pos = TypeConversions::ConvertToPosition(node->position);
diff --git a/src/mesh/NodeDB.cpp b/src/mesh/NodeDB.cpp
index f65fe0da35..3734309be5 100644
--- a/src/mesh/NodeDB.cpp
+++ b/src/mesh/NodeDB.cpp
@@ -195,7 +195,7 @@ bool NodeDB::factoryReset()
     // first, remove the "/prefs" (this removes most prefs)
     rmDir("/prefs");
     if (FSCom.exists("/static/rangetest.csv") && !FSCom.remove("/static/rangetest.csv")) {
-        LOG_WARN("Could not remove rangetest.csv file\n");
+        LOG_ERROR("Could not remove rangetest.csv file\n");
     }
     // second, install default state (this will deal with the duplicate mac address issue)
     installDefaultDeviceState();
@@ -527,7 +527,7 @@ void NodeDB::pickNewNodeNum()
         LOG_WARN("NOTE! Our desired nodenum 0x%x is invalid or in use, so trying for 0x%x\n", nodeNum, candidate);
         nodeNum = candidate;
     }
-    LOG_WARN("Using nodenum 0x%x \n", nodeNum);
+    LOG_DEBUG("Using nodenum 0x%x \n", nodeNum);
 
     myNodeInfo.my_node_num = nodeNum;
 }
@@ -934,7 +934,7 @@ meshtastic_NodeInfoLite *NodeDB::getOrCreateMeshNode(NodeNum n)
         if ((numMeshNodes >= MAX_NUM_NODES) || (memGet.getFreeHeap() < meshtastic_NodeInfoLite_size * 3)) {
             if (screen)
                 screen->print("Warn: node database full!\nErasing oldest entry\n");
-            LOG_INFO("Warn: node database full!\nErasing oldest entry\n");
+            LOG_WARN("Node database full! Erasing oldest entry\n");
             // look for oldest node and erase it
             uint32_t oldest = UINT32_MAX;
             int oldestIndex = -1;
diff --git a/src/mesh/RF95Interface.cpp b/src/mesh/RF95Interface.cpp
index 72e0f823f9..adc512ae2c 100644
--- a/src/mesh/RF95Interface.cpp
+++ b/src/mesh/RF95Interface.cpp
@@ -19,7 +19,7 @@ RF95Interface::RF95Interface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIO
                              RADIOLIB_PIN_TYPE busy)
     : RadioLibInterface(hal, cs, irq, rst, busy)
 {
-    LOG_WARN("RF95Interface(cs=%d, irq=%d, rst=%d, busy=%d)\n", cs, irq, rst, busy);
+    LOG_DEBUG("RF95Interface(cs=%d, irq=%d, rst=%d, busy=%d)\n", cs, irq, rst, busy);
 }
 
 /** Some boards require GPIO control of tx vs rx paths */
diff --git a/src/mesh/SX126xInterface.cpp b/src/mesh/SX126xInterface.cpp
index 7220dd3e5c..104d0a5edc 100644
--- a/src/mesh/SX126xInterface.cpp
+++ b/src/mesh/SX126xInterface.cpp
@@ -17,7 +17,7 @@ SX126xInterface<T>::SX126xInterface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs
                                     RADIOLIB_PIN_TYPE busy)
     : RadioLibInterface(hal, cs, irq, rst, busy, &lora), lora(&module)
 {
-    LOG_WARN("SX126xInterface(cs=%d, irq=%d, rst=%d, busy=%d)\n", cs, irq, rst, busy);
+    LOG_DEBUG("SX126xInterface(cs=%d, irq=%d, rst=%d, busy=%d)\n", cs, irq, rst, busy);
 }
 
 /// Initialise the Driver transport hardware and software.
diff --git a/src/mesh/SX128xInterface.cpp b/src/mesh/SX128xInterface.cpp
index f2220dbcf1..45325f3397 100644
--- a/src/mesh/SX128xInterface.cpp
+++ b/src/mesh/SX128xInterface.cpp
@@ -17,7 +17,7 @@ SX128xInterface<T>::SX128xInterface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs
                                     RADIOLIB_PIN_TYPE busy)
     : RadioLibInterface(hal, cs, irq, rst, busy, &lora), lora(&module)
 {
-    LOG_WARN("SX128xInterface(cs=%d, irq=%d, rst=%d, busy=%d)\n", cs, irq, rst, busy);
+    LOG_DEBUG("SX128xInterface(cs=%d, irq=%d, rst=%d, busy=%d)\n", cs, irq, rst, busy);
 }
 
 /// Initialise the Driver transport hardware and software.
diff --git a/src/platform/esp32/SimpleAllocator.cpp b/src/platform/esp32/SimpleAllocator.cpp
index ed44722c5b..63f3b02de0 100644
--- a/src/platform/esp32/SimpleAllocator.cpp
+++ b/src/platform/esp32/SimpleAllocator.cpp
@@ -58,7 +58,7 @@ void *operator new(size_t sz) throw(std::bad_alloc)
 void operator delete(void *ptr) throw()
 {
     if (activeAllocator)
-        LOG_DEBUG("Warning: leaking an active allocator object\n"); // We don't properly handle this yet
+        LOG_WARN("Leaking an active allocator object\n"); // We don't properly handle this yet
     else
         free(ptr);
 }