diff --git a/arch/nrf52/nrf52.ini b/arch/nrf52/nrf52.ini
index d75f863064..778be55232 100644
--- a/arch/nrf52/nrf52.ini
+++ b/arch/nrf52/nrf52.ini
@@ -1,10 +1,11 @@
 [nrf52_base]
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-platform = platformio/nordicnrf52@^10.5.0
+platform = platformio/nordicnrf52@^10.6.0
 extends = arduino_base
 platform_packages =
   ; our custom Git version until they merge our PR
   framework-arduinoadafruitnrf52 @ https://github.com/geeksville/Adafruit_nRF52_Arduino.git
+  toolchain-gccarmnoneeabi@~1.90301.0
 
 build_type = debug
 build_flags =
diff --git a/src/main.cpp b/src/main.cpp
index 53a6622722..2357a00de5 100644
--- a/src/main.cpp
+++ b/src/main.cpp
@@ -409,13 +409,13 @@ void setup()
     digitalWrite(AQ_SET_PIN, HIGH);
 #endif
 
-#ifdef T_DECK
+#if defined(T_DECK)
     // enable keyboard
     pinMode(KB_POWERON, OUTPUT);
     digitalWrite(KB_POWERON, HIGH);
     // There needs to be a delay after power on, give LILYGO-KEYBOARD some startup time
     // otherwise keyboard and touch screen will not work
-    delay(800);
+    delay(200);
 #endif
 
     // Currently only the tbeam has a PMU
@@ -577,7 +577,6 @@ void setup()
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::INA3221, meshtastic_TelemetrySensorType_INA3221);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::MAX17048, meshtastic_TelemetrySensorType_MAX17048);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::MCP9808, meshtastic_TelemetrySensorType_MCP9808);
-    scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::MCP9808, meshtastic_TelemetrySensorType_MCP9808);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::SHT31, meshtastic_TelemetrySensorType_SHT31);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::SHTC3, meshtastic_TelemetrySensorType_SHTC3);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::LPS22HB, meshtastic_TelemetrySensorType_LPS22);
diff --git a/src/mesh/NodeDB.cpp b/src/mesh/NodeDB.cpp
index 90b3e07477..6ad1a953d5 100644
--- a/src/mesh/NodeDB.cpp
+++ b/src/mesh/NodeDB.cpp
@@ -541,7 +541,7 @@ void NodeDB::initConfigIntervals()
 
     config.display.screen_on_secs = default_screen_on_secs;
 
-#if defined(T_WATCH_S3) || defined(T_DECK) || defined(RAK14014)
+#if defined(T_WATCH_S3) || defined(T_DECK) || defined(MESH_TAB) || defined(RAK14014)
     config.power.is_power_saving = true;
     config.display.screen_on_secs = 30;
     config.power.wait_bluetooth_secs = 30;
@@ -1422,4 +1422,4 @@ void recordCriticalError(meshtastic_CriticalErrorCode code, uint32_t address, co
     LOG_ERROR("A critical failure occurred, portduino is exiting");
     exit(2);
 #endif
-}
\ No newline at end of file
+}
diff --git a/src/modules/Modules.cpp b/src/modules/Modules.cpp
index ad3f0ace45..9baed824c9 100644
--- a/src/modules/Modules.cpp
+++ b/src/modules/Modules.cpp
@@ -74,7 +74,7 @@
 #include "modules/StoreForwardModule.h"
 #endif
 #endif
-#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040)
+#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO)
 #if !MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION
 #include "modules/ExternalNotificationModule.h"
 #endif
@@ -223,7 +223,7 @@ void setupModules()
         storeForwardModule = new StoreForwardModule();
 #endif
 #endif
-#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040)
+#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO)
 #if !MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION
         externalNotificationModule = new ExternalNotificationModule();
 #endif
@@ -245,4 +245,4 @@ void setupModules()
     // NOTE! This module must be added LAST because it likes to check for replies from other modules and avoid sending extra
     // acks
     routingModule = new RoutingModule();
-}
\ No newline at end of file
+}