Bahan untuk build custom ROM Android untuk STB Indihome B860H
- Root with SuperSU
- Remove preinstalled app and unused app
- SETTINGS APP (For setting wifi, etc)
- ADB Running via Wifi (Just adb connect IP)
- Youtube (Gapps) using SmartYoutube
- BootLogo Changer 'mklogo' binnary may can be used
| CMD | INFO |
|---|---|
| ? | alias for 'help' |
| aml_sysrecovery | Burning with amlogic format package from partition sysrecovery |
| amlmmc | AMLMMC sub system |
| amlnf | aml nand sub-system |
| amlnf_test | AMLPHYNAND sub-system |
| autoscr | run script from memory |
| base | print or set address offset |
| bmp | manipulate BMP image data |
| booti | boot arm64 Linux Image image from memory |
| bootm | boot application image from memory |
| bootp | boot image via network using BOOTP/TFTP protocol |
| bootsys | bootsys - boot system |
| cbusreg | cbus register read/write |
| clkmsr | measure PLL clock |
| cmp | memory compare |
| cp | memory copy |
| crc32 | checksum calculation |
| cvbs | CVBS sub-system |
| dcache | enable or disable data cache |
| defenv_reserv | reserve some specified envs after defaulting env |
| dhcp | boot image via network using DHCP/TFTP protocol |
| echo | echo args to console |
| efuse | efuse read/write data commands |
| efuse_user | efuse user space read write ops |
| emmc | EMMC sub system |
| env | environment handling commands |
| exit | exit script |
| false | do nothing, unsuccessfully |
| fatinfo | print information about filesystem |
| fatload | load binary file from a dos filesystem |
| fatls | list files in a directory (default /) |
| fatsize | determine a file's size |
| fdt | flattened device tree utility commands |
| forceupdate | forceupdate |
| get_rebootmode | get reboot mode |
| go | start application at address 'addr' |
| gpio | query and control gpio pins |
| hdmitx | HDMITX sub-system |
| help | print command description/usage |
| i2c | I2C sub-system |
| icache | enable or disable instruction cache |
| imgread | Read the image from internal flash with actual size |
| itest | return true/false on integer compare |
| jlogo | test jpeg logo |
| jpeg | manipulate jpeg image data |
| jtagoff | disable jtag |
| jtagon | enable jtag |
| keyman | Unify key ops interfaces based dts cfg |
| keyunify | key unify sub-system |
| loop | infinite loop on address range |
| macreg | ethernet mac register read/write/dump |
| md | memory display |
| mm | memory modify (auto-incrementing address) |
| mmc | MMC sub system |
| mmcinfo | display MMC info |
| mw | memory write (fill) |
| mwm | mw mask function |
| nm | memory modify (constant address) |
| normal | normal - enter norm mode |
| open_scp_log | print SCP messgage |
| osd | osd sub-system |
| phyreg | ethernet phy register read/write/dump |
| ping | send ICMP ECHO_REQUEST to network host |
| printenv | print environment variables |
| rarpboot | boot image via network using RARP/TFTP protocol |
| read_temp | cpu temp-system |
| readconf | readconf- read config from conf partition |
| reboot | set reboot mode and reboot system |
| reset | Perform RESET of the CPU |
| rsvmem | reserve memory |
| run | run commands in an environment variable |
| safe | safe - enter safe mode |
| saradc | saradc sub-system |
| saradc_12bit | saradc sub-system |
| saveenv | save environment variables to persistent storage |
| sdc_burn | Burning with amlogic format package in sdmmc |
| sdc_update | Burning a partition with image file in sdmmc card |
| set_trim_base | cpu temp-system |
| set_usb_boot | set usb boot mode |
| setenv | set environment variables |
| showvar | print local hushshell variables |
| silent | silent |
| sleep | delay execution for some time |
| store | STORE sub-system |
| systemoff | system off |
| temp_triming | cpu temp-system |
| test | minimal test like /bin/sh |
| tftpboot | boot image via network using TFTP protocol |
| true | do nothing, successfully |
| unpackimg | un pack logo image into pictures |
| update | Enter v2 usbburning mode |
| upgrade | burn image into flash |
| upgrade_d | burn image into flash |
| usb | USB sub-system |
| usb_burn | Burning with amlogic format package in usb |
| usb_update | Burning a partition with image file in usb host |
| usbboot | boot from USB device |
| version | print monitor, compiler and linker version |
| vout | VOUT sub-system |
| vpu | vpu sub-system |
| wipeisb | wipeisb |
| write_trim | cpu temp-system |
| write_version | cpu temp-system |
1080p_h=1050
1080p_w=1874
1080p_x=23
1080p_y=15
576i_h=551
576i_w=659
576i_x=32
576i_y=9
EnableSelinux=permissive
ab=0
aml_dt=gxl_p215_1g
baudrate=115200
bootargs=rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive logo=osd1,loaded,0x3d800000,576cvbs maxcpus=4 vout=576cvbs,enable hdmimode=1080p60hz cvbsmode=576cvbs hdmitx= rxsen1 cvbsdrv=0 androidboot.firstboot=0 jtag=apee androidboot.hardware=amlogic
bootcmd=run start_autoscript; run storeboot
bootdelay=3
cmdline_keys=if keyman init 0x1234; then if keyman read usid ${loadaddr} str; then setenv bootargs ${bootargs} androidboot.serialno=${usid};fi;if keyman read mac ${loadaddr} str; then setenv bootargs ${bootargs} mac=${mac} androidboot.mac=${mac};fi;if keyman read deviceid ${loadaddr} str; then setenv bootargs ${bootargs} androidboot.deviceid=${deviceid};fi;fi;
cvbs_drv=0
cvbsmode=576cvbs
display_bpp=24
display_color_bg=0
display_color_fg=0xffff
display_color_index=24
display_height=576
display_layer=osd1
display_width=720
dtb_mem_addr=0x1000000
ethact=dwmac.c9410000
ethaddr=00:15:18:01:81:31
factory_reset_poweroff_protect=echo wipe_data=${wipe_data}; echo wipe_cache=${wipe_cache};if test ${wipe_data} = failed; then run init_display; run storeargs;if mmcinfo; then run recovery_from_sdcard;fi;if usb start 0; then run recovery_from_udisk;fi;run recovery_from_flash;fi; if test ${wipe_cache} = failed; then run init_display; run storeargs;if mmcinfo; then run recovery_from_sdcard;fi;if usb start 0; then run recovery_from_udisk;fi;run recovery_from_flash;fi;
fb_addr=0x3d800000
fb_height=1080
fb_width=1920
fdt_high=0x20000000
filesize=2c5
firstboot=0
gatewayip=10.18.9.1
hdmimode=1080p60hz
hostname=arm_gxbb
init_display=exit
initargs=rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000
ipaddr=10.18.9.97
jtag=apee
loadaddr=1080000
maxcpus=4
netmask=255.255.255.0
outputmode=576cvbs
preboot=run init_display;run storeargs;run irremote_update;run upgrade_key;run switch_bootmode;
reboot_mode=cold_boot
recovery_from_flash=setenv bootargs ${bootargs} aml_dt=${aml_dt} recovery_part={recovery_part} recovery_offset={recovery_offset} androidboot.selinux=permissive;if imgread kernel ${recovery_part} ${loadaddr} ${recovery_offset}; then wipeisb; bootm ${loadaddr}; fi
recovery_from_sdcard=setenv bootargs ${bootargs} aml_dt=${aml_dt} recovery_part={recovery_part} recovery_offset={recovery_offset};if fatload mmc 0 ${loadaddr} aml_autoscript; then autoscr ${loadaddr}; fi;if fatload mmc 0 ${loadaddr} recovery.img; then if fatload mmc 0 ${dtb_mem_addr} dtb.img; then echo sd dtb.img loaded; fi;wipeisb; bootm ${loadaddr};fi;
recovery_from_udisk=setenv bootargs ${bootargs} aml_dt=${aml_dt} recovery_part={recovery_part} recovery_offset={recovery_offset};if fatload usb 0 ${loadaddr} aml_autoscript; then autoscr ${loadaddr}; fi;if fatload usb 0 ${loadaddr} recovery.img; then if fatload usb 0 ${dtb_mem_addr} dtb.img; then echo udisk dtb.img loaded; fi;wipeisb; bootm ${loadaddr};fi;
recovery_offset=0
recovery_part=recovery
sdc_burning=sdc_burn ${sdcburncfg}
sdcburncfg=aml_sdc_burn.ini
serverip=10.18.9.113
start_autoscript=if mmcinfo; then run start_mmc_autoscript; fi; if usb start; then run start_usb_autoscript; fi; run start_emmc_autoscript
start_emmc_autoscript=if fatload mmc 1 1020000 emmc_autoscript; then autoscr 1020000; fi;
start_mmc_autoscript=if fatload mmc 0 1020000 s905_autoscript; then autoscr 1020000; fi;
start_usb_autoscript=for usbdev in 0 1 2 3; do if fatload usb ${usbdev} 1020000 s905_autoscript; then autoscr 1020000; fi; done
stderr=serial
stdin=serial
stdout=serial
storeargs=setenv bootargs ${initargs} androidboot.selinux=${EnableSelinux} logo=${display_layer},loaded,${fb_addr},${outputmode} maxcpus=${maxcpus} vout=${outputmode},enable hdmimode=${hdmimode} cvbsmode=${cvbsmode} hdmitx=${cecconfig} rxsen1 cvbsdrv=${cvbs_drv} androidboot.firstboot=${firstboot} jtag=${jtag}; setenv bootargs ${bootargs} androidboot.hardware=amlogic;run cmdline_keys;
storeboot=if imgread kernel boot ${loadaddr}; then bootm ${loadaddr}; fi;run update;
switch_bootmode=exit
try_auto_burn=update 700 750;
update=run usb_burning; run sdc_burning; if mmcinfo; then run recovery_from_sdcard;fi;if usb start 0; then run recovery_from_udisk;fi;run recovery_from_flash;
upgrade_check=echo upgrade_step=${upgrade_step}; if itest ${upgrade_step} == 3; then run init_display; run storeargs; run update;else fi;
upgrade_key=if gpio input GPIOAO_2; then echo detect upgrade key;if gpio input GPIOAO_2; then run update; fi;fi;
upgrade_step=2
usb_burning=update 1000
wipe_cache=successful
wipe_data=successful
Environment size: 5006/65532 bytes
0: bootloader 0 400000 0
1: reserved 2400000 4000000 0
2: env 6500000 800000 0
3: logo 6e00000 1000000 1
4: recovery 7f00000 1800000 1
5: rsv 9800000 800000 1
6: tee a100000 800000 1
7: crypt aa00000 2000000 1
8: misc cb00000 400000 1
9: conf d000000 400000 1
10: boot d500000 1000000 1
11: cache e600000 37a00000 2
12: system 46100000 6cc00000 1
13: data b2e00000 11f200000 4