From 37bb28a4c0872dd42c913f65fd03dc4be70da92a Mon Sep 17 00:00:00 2001 From: Ben Meadors Date: Mon, 25 Nov 2024 05:14:48 -0600 Subject: [PATCH] Removing 1.0 legacy boards from releases and completely removing Heltec wireless capsule from support (#5436) Co-authored-by: Tom Fifield --- platformio.ini | 1 - .../heltec_capsule_sensor_v3/platformio.ini | 11 ---- variants/heltec_capsule_sensor_v3/variant.h | 53 ------------------- .../heltec_wireless_paper_v1/platformio.ini | 1 + .../platformio.ini | 3 +- 5 files changed, 2 insertions(+), 67 deletions(-) delete mode 100644 variants/heltec_capsule_sensor_v3/platformio.ini delete mode 100644 variants/heltec_capsule_sensor_v3/variant.h diff --git a/platformio.ini b/platformio.ini index 982848f412..7f4fbc3a5e 100644 --- a/platformio.ini +++ b/platformio.ini @@ -34,7 +34,6 @@ default_envs = tbeam ;default_envs = radiomaster_900_bandit_nano ;default_envs = radiomaster_900_bandit_micro ;default_envs = radiomaster_900_bandit -;default_envs = heltec_capsule_sensor_v3 ;default_envs = heltec_vision_master_t190 ;default_envs = heltec_vision_master_e213 ;default_envs = heltec_vision_master_e290 diff --git a/variants/heltec_capsule_sensor_v3/platformio.ini b/variants/heltec_capsule_sensor_v3/platformio.ini deleted file mode 100644 index f1aef925dc..0000000000 --- a/variants/heltec_capsule_sensor_v3/platformio.ini +++ /dev/null @@ -1,11 +0,0 @@ -[env:heltec_capsule_sensor_v3] -extends = esp32s3_base -board = heltec_wifi_lora_32_V3 -board_check = true - -build_flags = - ${esp32s3_base.build_flags} -I variants/heltec_capsule_sensor_v3 - -D HELTEC_CAPSULE_SENSOR_V3 - -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely. - ;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output - diff --git a/variants/heltec_capsule_sensor_v3/variant.h b/variants/heltec_capsule_sensor_v3/variant.h deleted file mode 100644 index 415de0559d..0000000000 --- a/variants/heltec_capsule_sensor_v3/variant.h +++ /dev/null @@ -1,53 +0,0 @@ -#define LED_PIN 33 -#define LED_PIN2 34 -#define EXT_PWR_DETECT 35 - -#define BUTTON_PIN 18 - -#define BATTERY_PIN 7 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage -#define ADC_CHANNEL ADC1_GPIO7_CHANNEL -#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider -#define ADC_MULTIPLIER (4.9 * 1.045) -#define ADC_CTRL 36 // active HIGH, powers the voltage divider. Only on 1.1 -#define ADC_CTRL_ENABLED HIGH - -#undef GPS_RX_PIN -#undef GPS_TX_PIN -#define GPS_RX_PIN 5 -#define GPS_TX_PIN 4 -#define PIN_GPS_RESET 3 -#define GPS_RESET_MODE LOW -#define PIN_GPS_PPS 1 -#define PIN_GPS_EN 21 -#define GPS_EN_ACTIVE HIGH - -#define USE_SX1262 -#define LORA_DIO0 -1 // a No connect on the SX1262 module -#define LORA_RESET 12 -#define LORA_DIO1 14 // SX1262 IRQ -#define LORA_DIO2 13 // SX1262 BUSY -#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled - -#define LORA_SCK 9 -#define LORA_MISO 11 -#define LORA_MOSI 10 -#define LORA_CS 8 - -#define SX126X_CS LORA_CS -#define SX126X_DIO1 LORA_DIO1 -#define SX126X_BUSY LORA_DIO2 -#define SX126X_RESET LORA_RESET - -#define SX126X_DIO2_AS_RF_SWITCH -#define SX126X_DIO3_TCXO_VOLTAGE 1.8 - -#define I2C_SDA 1 -#define I2C_SCL 2 -#define HAS_SCREEN 0 -#define SENSOR_POWER_CTRL_PIN 21 -#define SENSOR_POWER_ON 1 - -#define PERIPHERAL_WARMUP_MS 100 -#define SENSOR_GPS_CONFLICT - -#define ESP32S3_WAKE_TYPE ESP_EXT1_WAKEUP_ANY_HIGH \ No newline at end of file diff --git a/variants/heltec_wireless_paper_v1/platformio.ini b/variants/heltec_wireless_paper_v1/platformio.ini index 999f1586a2..c94bcaccaa 100644 --- a/variants/heltec_wireless_paper_v1/platformio.ini +++ b/variants/heltec_wireless_paper_v1/platformio.ini @@ -1,5 +1,6 @@ [env:heltec-wireless-paper-v1_0] extends = esp32s3_base +board_level = extra board = heltec_wifi_lora_32_V3 build_flags = ${esp32s3_base.build_flags} diff --git a/variants/heltec_wireless_tracker_V1_0/platformio.ini b/variants/heltec_wireless_tracker_V1_0/platformio.ini index 303e27dbf2..0e48c72f2f 100644 --- a/variants/heltec_wireless_tracker_V1_0/platformio.ini +++ b/variants/heltec_wireless_tracker_V1_0/platformio.ini @@ -1,14 +1,13 @@ [env:heltec-wireless-tracker-V1-0] extends = esp32s3_base +board_level = extra board = heltec_wireless_tracker upload_protocol = esptool - build_flags = ${esp32s3_base.build_flags} -I variants/heltec_wireless_tracker_V1_0 -D HELTEC_TRACKER_V1_0 -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely. ;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output - lib_deps = ${esp32s3_base.lib_deps} lovyan03/LovyanGFX@^1.1.8 \ No newline at end of file