BoardConfig.mk

#
# Copyright (C) 2016 The CyanogenMod Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

BOARD_VENDOR := zte

LOCAL_PATH := device/zte/tulip

TARGET_SPECIFIC_HEADER_PATH := $(LOCAL_PATH)/include

# Assertions
#XXX
#TARGET_BOARD_INFO_FILE ?= $(LOCAL_PATH)/board-info.txt

# Architecture
TARGET_ARCH := arm64
TARGET_ARCH_VARIANT := armv8-a
TARGET_CPU_ABI := arm64-v8a
TARGET_CPU_ABI2 :=
TARGET_CPU_VARIANT := cortex-a53

TARGET_2ND_ARCH := arm
TARGET_2ND_ARCH_VARIANT := armv7-a-neon
TARGET_2ND_CPU_ABI := armeabi-v7a
TARGET_2ND_CPU_ABI2 := armeabi
TARGET_2ND_CPU_VARIANT := cortex-a53

TARGET_BOARD_PLATFORM := msm8952
TARGET_BOARD_PLATFORM_GPU := qcom-adreno405

TARGET_USES_64_BIT_BINDER := true

# Bootloader
TARGET_BOOTLOADER_BOARD_NAME := MSM8952
TARGET_NO_BOOTLOADER := true

# Kernel
BOARD_KERNEL_BASE := 0x80000000
BOARD_KERNEL_CMDLINE := console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 earlyprintk ramoops.mem_address=0x9fd00000 ramoops.mem_size=0x200000 ramoops.console_size=0x100000
BOARD_KERNEL_CMDLINE += androidboot.selinux=permissive
BOARD_KERNEL_IMAGE_NAME := Image.gz-dtb
BOARD_KERNEL_PAGESIZE := 4096
BOARD_RAMDISK_OFFSET := 0x01000000
#ENABLE_CPUSETS := true
#ENABLE_SCHEDBOOST := true
TARGET_KERNEL_APPEND_DTB := true
TARGET_KERNEL_ARCH := arm64
TARGET_KERNEL_SOURCE := kernel/zte/msm8952
TARGET_KERNEL_CONFIG := lineage_tulip_defconfig
#TARGET_USES_UNCOMPRESSED_KERNEL := true

# Audio
AUDIO_FEATURE_ENABLED_ACDB_LICENSE := true
AUDIO_FEATURE_ENABLED_KPI_OPTIMIZE := true
AUDIO_FEATURE_ENABLED_MULTI_VOICE_SESSIONS := true
AUDIO_USE_LL_AS_PRIMARY_OUTPUT := true
BOARD_USES_ALSA_AUDIO := true
USE_CUSTOM_AUDIO_POLICY := 1
USE_XML_AUDIO_POLICY_CONF := 1

# Bluetooth
BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := $(LOCAL_PATH)/bluetooth
BOARD_HAVE_BLUETOOTH := true
BOARD_HAVE_BLUETOOTH_QCOM := true
BLUETOOTH_HCI_USE_MCT := true

# Camera
TARGET_SPECIFIC_CAMERA_PARAMETER_LIBRARY := libcamera_parameters_ext
TARGET_USES_MEDIA_EXTENSIONS := true
USE_DEVICE_SPECIFIC_CAMERA := true

# CMHW
BOARD_USES_CYANOGEN_HARDWARE := true
BOARD_HARDWARE_CLASS += \
    hardware/cyanogen/cmhw \
    $(LOCAL_PATH)/cmhw

# Display
NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
SF_VSYNC_EVENT_PHASE_OFFSET_NS := 2000000
TARGET_FORCE_HWC_FOR_VIRTUAL_DISPLAYS := true
TARGET_USES_C2D_COMPOSITION := true
TARGET_USES_ION := true
TARGET_USES_OVERLAY := true
USE_OPENGL_RENDERER := true
VSYNC_EVENT_PHASE_OFFSET_NS := 6000000

MAX_EGL_CACHE_KEY_SIZE := 12*1024
MAX_EGL_CACHE_SIZE := 2048*1024

HAVE_ADRENO_SOURCE:= false
OVERRIDE_RS_DRIVER:= libRSDriver_adreno.so

# Encryption
TARGET_HW_DISK_ENCRYPTION := true

# Filesystem
BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_FLASH_BLOCK_SIZE := 262144 # (BOARD_KERNEL_PAGESIZE * 64)
TARGET_USERIMAGES_USE_EXT4 := true
TARGET_USERIMAGES_USE_F2FS := true

# Init
TARGET_PLATFORM_DEVICE_BASE := /devices/soc.0/

# Keymaster
TARGET_PROVIDES_KEYMASTER := true

# Lights
TARGET_PROVIDES_LIBLIGHT := true

# NFC
# XXX?
BOARD_NFC_CHIPSET := pn548

# Power
TARGET_POWERHAL_VARIANT := qcom

# Properties
TARGET_SYSTEM_PROP := $(LOCAL_PATH)/system.prop

# Qualcomm
BOARD_USES_QCOM_HARDWARE := true
BOARD_USES_QC_TIME_SERVICES := true
TARGET_USE_SDCLANG := true

# Recovery
TARGET_RECOVERY_FSTAB := $(LOCAL_PATH)/rootdir/etc/fstab.qcom

# TWRP
TW_INCLUDE_CRYPTO := true

# Releasetools
TARGET_RECOVERY_UPDATER_LIBS := librecovery_updater_tulip
TARGET_RELEASETOOLS_EXTENSIONS := $(LOCAL_PATH)

# RIL
TARGET_RIL_VARIANT := caf

# SELinux
include device/qcom/sepolicy/sepolicy.mk
BOARD_SEPOLICY_DIRS += $(LOCAL_PATH)/sepolicy

# Wifi
WPA_SUPPLICANT_VERSION      := VER_0_8_X
BOARD_HAS_QCOM_WLAN         := true
BOARD_HAS_QCOM_WLAN_SDK     := true
BOARD_WLAN_DEVICE           := qcwcn
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
BOARD_HOSTAPD_DRIVER        := NL80211
BOARD_HOSTAPD_PRIVATE_LIB   := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
TARGET_PROVIDES_WCNSS_QMI   := true
TARGET_USES_WCNSS_CTRL      := true
TARGET_USES_QCOM_WCNSS_QMI  := true
WIFI_DRIVER_FW_PATH_AP      := "ap"
WIFI_DRIVER_FW_PATH_STA     := "sta"
WIFI_DRIVER_MODULE_PATH     := "/system/lib/modules/wlan.ko"
WIFI_DRIVER_MODULE_NAME     := "wlan"

TARGET_OTA_ASSERT_DEVICE := tulip

# Filesystem
BOARD_BOOTIMAGE_PARTITION_SIZE := 67108864
BOARD_CACHEIMAGE_PARTITION_SIZE := 314572800
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 67108864
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 4294967296
BOARD_USERDATAIMAGE_PARTITION_SIZE := 25429515776

# inherit from the proprietary version
-include vendor/zte/tulip/BoardConfigVendor.mk