Skip to content

Latest commit

 

History

History
31 lines (25 loc) · 768 Bytes

README.md

File metadata and controls

31 lines (25 loc) · 768 Bytes

A Quagga-Based RPKI-Enabled Router

Configure

Installing and running should be as easy as:

  1. Install VirtualBox
  2. Install Vagrant
  3. Clone this repository:
	# git clone https://github.com/carlosm3011/ops-quagga-rpki-router ops-quagga-rpki-router.git
  1. cd ops-quagga-rpki-router.git
  2. run "vagrant up"

Run the router

  1. Connect with "vagrant ssh" to the recently-created box
  2. Start bgpd with
	# bgpd -d &
  1. Check it's working correctly The bgpd daemon will take a few seconds to properly start up and connect to the RPKI Cache. After it has sucessfully booted, try the following commands (on the running virtual machine):
	# vtysh
	# show rpki prefix-table
	# show rpki cache-connection

Author and Contact Information