Version: 1.0.0 (SemVer)
Date: 2016-03-25
Authors: Felix Geisendörfer, Kevin van
Zonneveld, Tim Koschützki,
Naren Venkataraman, Marius
Kleidl
Collaborators:
Bruno de Carvalho,
James Butler,
Øystein Steimler,
Sam Rijs,
Khang Toh,
Jacques Boscq,
Jérémy FRERE,
Pieter Hintjens,
Stephan Seidt,
Aran Wilkinson,
Svein Ove Aas,
Oliver Anan,
Tim,
j4james,
Julian Reschke,
Evert Pot,
Jochen Kupperschmidt,
Andrew Fenn,
Kevin Swiber,
Jan Kohlhof,
eno,
Luke Arduini,
Jim Schmid,
Jeffrey 'jf' Lim,
Daniel Lopretto,
Mark Murphy,
Peter Darrow,
Gargaj,
Tomasz Rydzyński,
Tino de Bruijn,
Jonas mg,
Christian Ulbrich,
Jon Gjengset,
Michael Elovskikh,
Rick Olson,
J. Ryan Stinnett,
Ifedapo Olarewaju
Robert Nagy,
Felix Schwarz
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119.
Following SemVer, as of 1.0.0 tus is ready for general adoption. We don't expect to make breaking changes, but if we do, those will have to be in a 2.0.0. Introducing a new extension or any backwards-compatible change adding new functionality will result in a bumped MINOR version.
This protocol is authored and owned by the tus community. We welcome patches and feedback via GitHub. All authors and collaborators will be listed as such in the protocol header.
Please also let us know about any implementations (open source or commercial) if you'd like to be listed on the implementations page.
The protocol provides a mechanism for resumable file uploads via HTTP/1.1 (RFC 7230) and HTTP/2 (RFC 7540).
Characters enclosed by square brackets indicate a placeholder (e.g. [size]).
The terms space, comma, and semicolon refer to their ASCII representations.
The core protocol describes how to resume an interrupted upload. It assumes that you already have a URL for the upload, usually created via the Creation extension.
All Clients and Servers MUST implement the core protocol.
This specification does not describe the structure of URLs, as that is left for the specific implementation to decide. All URLs shown in this document are meant for example purposes only.
In addition, the implementation of authentication and authorization is left for the Server to decide.
A HEAD request is used to determine the offset at which the upload should be
continued.
The example below shows the continuation of a 100 byte upload that was interrupted after 70 bytes were transferred.
Request:
HEAD /files/24e533e02ec3bc40c387f1a0e460e216 HTTP/1.1
Host: tus.example.org
Tus-Resumable: 1.0.0
Response:
HTTP/1.1 200 OK
Upload-Offset: 70
Tus-Resumable: 1.0.0
Given the offset, the Client uses the PATCH method to resume the upload:
Request:
PATCH /files/24e533e02ec3bc40c387f1a0e460e216 HTTP/1.1
Host: tus.example.org
Content-Type: application/offset+octet-stream
Content-Length: 30
Upload-Offset: 70
Tus-Resumable: 1.0.0
[remaining 30 bytes]
Response:
HTTP/1.1 204 No Content
Tus-Resumable: 1.0.0
Upload-Offset: 100
The Upload-Offset request and response header indicates a byte offset within a
resource. The value MUST be a non-negative integer.
The Upload-Length request and response header indicates the size of the entire
upload in bytes. The value MUST be a non-negative integer.
The Tus-Version response header MUST be a comma-separated list of protocol versions
supported by the Server. The list MUST be sorted by Server's preference
where the first one is the most preferred one.
The Tus-Resumable header MUST be included in every request and response except
for OPTIONS requests. The value MUST be the version of the protocol used by
the Client or the Server.
If the version specified by the Client is not supported by the Server, it
MUST respond with the 412 Precondition Failed status and MUST include the
Tus-Version header into the response.
In addition, the Server MUST NOT process the request.
The Tus-Extension response header MUST be a comma-separated list of the extensions
supported by the Server. If no extensions are supported, the Tus-Extension
header MUST be omitted.
The Tus-Max-Size response header MUST be a non-negative integer indicating the maximum
allowed size of an entire upload in bytes. The Server SHOULD set this header if
there is a known hard limit.
The X-HTTP-Method-Override request header MUST be a string which MUST be
interpreted as the request's method by the Server, if the header is presented.
The actual method of the request MUST be ignored. The Client SHOULD use this
header if its environment does not support the PATCH or DELETE methods.
The Server MUST always include the Upload-Offset header in the response for a
HEAD request, even if the offset is 0, or the upload is already considered
completed. If the size of the upload is known, the Server MUST include the
Upload-Length header in the response. If the resource is not found, the Server
SHOULD return either the 404 Not Found, 410 Gone or 403 Forbidden status
without the Upload-Offset header.
The Server MUST prevent the client and/or proxies from caching the response by
adding the Cache-Control: no-store header to the response while the upload is
not finished. After the upload has been finished, the Server MAY set or omit the
Cache-Control header as it desires.
The Server SHOULD accept PATCH requests against any upload URL and apply the
bytes contained in the message at the given offset specified by the
Upload-Offset header. All PATCH requests MUST use
Content-Type: application/offset+octet-stream, otherwise the server SHOULD
return a 415 Unsupported Media Type status.
The Upload-Offset header's value MUST be equal to the current offset of the
resource. In order to achieve parallel upload the
Concatenation extension MAY be used. If the offsets do not
match, the Server MUST respond with the 409 Conflict status without modifying
the upload resource. This response SHOULD include the upload's current offset
in the Upload-Offset header to enable the Client to resume the upload from
the correct offset without issuing an additional HEAD request first.
The Client SHOULD send all the remaining bytes of an upload in a single PATCH
request, but MAY also use multiple small requests successively for scenarios
where this is desirable. One example for these situations is when the
Checksum extension is used.
The Server MUST acknowledge successful PATCH requests with the
204 No Content status. It MUST include the Upload-Offset header containing
the new offset. The new offset MUST be the sum of the offset before the PATCH
request and the number of bytes received and processed or stored during the
current PATCH request.
If the server receives a PATCH request against a non-existent resource
it SHOULD return a 404 Not Found status.
Both Client and Server, SHOULD attempt to detect and handle network errors predictably. They MAY do so by checking for read/write socket errors, as well as setting read/write timeouts. A timeout SHOULD be handled by closing the underlying connection.
The Server SHOULD always attempt to store as much of the received data as possible.
An OPTIONS request MAY be used to gather information about the Server's current
configuration. A successful response indicated by the 204 No Content or 200 OK status
MUST contain the Tus-Version header. It MAY include the Tus-Extension and
Tus-Max-Size headers.
The Client SHOULD NOT include the Tus-Resumable header in the request and the
Server MUST ignore the header.
This example clarifies the response for an OPTIONS request. The version used
in the response is 1.0.0 while the Server is also capable of
handling 0.2.2 and 0.2.1. Uploads with a total size of up to 1GB are
allowed and the extensions for Creation and
Expiration are enabled.
Request:
OPTIONS /files HTTP/1.1
Host: tus.example.org
Response:
HTTP/1.1 204 No Content
Tus-Resumable: 1.0.0
Tus-Version: 1.0.0,0.2.2,0.2.1
Tus-Max-Size: 1073741824
Tus-Extension: creation,expiration
Clients and Servers are encouraged to implement as many of the extensions
as possible. Feature detection SHOULD be achieved by the Client sending an
OPTIONS request and the Server responding with the Tus-Extension header.
The Client and the Server SHOULD implement the upload creation extension. If
the Server supports this extension, it MUST add creation to the Tus-Extension
header.
An empty POST request is used to create a new upload resource. The
Upload-Length header indicates the size of the entire upload in bytes.
Request:
POST /files HTTP/1.1
Host: tus.example.org
Content-Length: 0
Upload-Length: 100
Tus-Resumable: 1.0.0
Upload-Metadata: filename d29ybGRfZG9taW5hdGlvbl9wbGFuLnBkZg==,is_confidential
Response:
HTTP/1.1 201 Created
Location: https://tus.example.org/files/24e533e02ec3bc40c387f1a0e460e216
Tus-Resumable: 1.0.0
The new resource has an implicit offset of 0 allowing the Client to use the
core protocol for performing the actual upload.
The Upload-Defer-Length request and response header indicates that the size of
the upload is not known currently and will be transferred later. Its value MUST
be 1. If the length of an upload is not deferred, this header MUST be omitted.
The Upload-Metadata request and response header MUST consist of one or more comma-separated
key-value pairs. The key and value MUST be separated by a space. The key
MUST NOT contain spaces and commas and MUST NOT be empty. The key SHOULD be
ASCII encoded and the value MUST be Base64 encoded. All keys MUST be unique.
The value MAY be empty. In these cases, the space, which would normally separate
the key and the value, MAY be left out.
Since metadata can contain arbitrary binary values, Servers SHOULD carefully validate metadata values or sanitize them before using them as header values to avoid header smuggling.
The Client MUST send a POST request against a known upload creation URL to
request a new upload resource. The request MUST include one of the following headers:
a) Upload-Length to indicate the size of an entire upload in bytes.
b) Upload-Defer-Length: 1 if upload size is not known at the time. Once it is
known the Client MUST set the Upload-Length header in the next PATCH request.
Once set the length MUST NOT be changed. As long as the length of the upload is
not known, the Server MUST set Upload-Defer-Length: 1 in all responses to
HEAD requests. If the Upload-Defer-Length header contains any other value
than 1 the server should return a 400 Bad Request status.
If the Server supports deferring length, it MUST add creation-defer-length to
the Tus-Extension header.
The Client MAY supply the Upload-Metadata header to add additional metadata to the
upload creation request. The Server MAY decide to ignore or use this information to
further process the request or to reject it. If an upload contains additional
metadata, responses to HEAD requests MUST include the Upload-Metadata header
and its value as specified by the Client during the creation.
If the length of the upload exceeds the maximum, which MAY be specified using
the Tus-Max-Size header, the Server MUST respond with the
413 Request Entity Too Large status.
The Server MUST acknowledge a successful upload creation with the 201 Created
status. The Server MUST set the Location header to the URL of the created
resource. This URL MAY be absolute or relative.
The Client MUST perform the actual upload using the core protocol.
The Client MAY include parts of the upload in the initial Creation request using the Creation With Upload extension.
If the Server supports this extension, it MUST advertise this by including
creation-with-upload in the Tus-Extension header. Furthermore, this extension
depends directly on the Creation extension. Therefore, if the Server does not
offer the Creation extension, it MUST NOT offer the Creation With Upload
extension either.
The Client MAY include either the entirety or a chunk of the upload data in the body of
the POST request. In this case, similar rules as for the PATCH request and
response apply. The Client MUST include the
Content-Type: application/offset+octet-stream header. The Server SHOULD accept
as many bytes as possible and MUST include the Upload-Offset header in the
response and MUST set its value to the offset of the upload after applying the
accepted bytes.
If the Client wants to use this extension, the Client SHOULD verify that it is
supported by the Server before sending the POST request.
In addition, the Client SHOULD include the Expect: 100-continue header in
the request to receive early feedback from the Server on whether it will accept
the creation request, before attempting to transfer the first chunk.
A non-empty POST request is used to create a new upload resource. The
Upload-Offset header in the response indicates how much data has been accepted.
Request:
POST /files HTTP/1.1
Host: tus.example.org
Content-Length: 5
Upload-Length: 100
Tus-Resumable: 1.0.0
Content-Type: application/offset+octet-stream
hello
Response:
HTTP/1.1 201 Created
Location: https://tus.example.org/files/24e533e02ec3bc40c387f1a0e460e216
Tus-Resumable: 1.0.0
Upload-Offset: 5
The Server MAY remove unfinished uploads once they expire. In order to indicate
this behavior to the Client, the Server MUST add expiration to the
Tus-Extension header.
The unfinished upload is available until the time specified in Upload-Expires.
After this date the upload can not be resumed.
Request:
PATCH /files/24e533e02ec3bc40c387f1a0e460e216 HTTP/1.1
Host: tus.example.org
Content-Type: application/offset+octet-stream
Content-Length: 30
Upload-Offset: 70
Tus-Resumable: 1.0.0
[remaining 30 bytes]
Response:
HTTP/1.1 204 No Content
Upload-Expires: Wed, 25 Jun 2014 16:00:00 GMT
Tus-Resumable: 1.0.0
Upload-Offset: 100
The Upload-Expires response header indicates the time after which the unfinished upload
expires. A Server MAY wish to remove incomplete uploads after a given
period of time to prevent abandoned uploads from taking up extra storage. The
Client SHOULD use this header to determine if an upload is still valid before
attempting to resume the upload.
This header MUST be included in every PATCH response if the upload is going
to expire. If the expiration is known at the creation, the Upload-Expires
header MUST be included in the response to the initial POST request.
Its value MAY change over time.
If a Client does attempt to resume an upload which has since been removed by the
Server, the Server SHOULD respond with the404 Not Found or 410 Gone status.
The latter one SHOULD be used if the Server is keeping track of expired uploads.
In both cases the Client SHOULD start a new upload.
The value of the Upload-Expires header MUST be in
RFC 7231 datetime format.
The Client and the Server MAY implement and use this extension to verify data
integrity of each PATCH request. If supported, the Server MUST add checksum
to the Tus-Extension header.
A Client MAY include the Upload-Checksum header in a PATCH request.
Once the entire request has been received, the Server MUST verify the uploaded
chunk against the provided checksum using the specified algorithm. Depending on
the result the Server MAY respond with one of the following status code:
400 Bad Requestif the checksum algorithm is not supported by the server,460 Checksum Mismatchif the checksums mismatch or204 No Contentif the checksums match and the processing of the data succeeded. In the first two cases the uploaded chunk MUST be discarded, and the upload and its offset MUST NOT be updated.
The Server MUST support at least the SHA1 checksum algorithm identified
by sha1. The names of the checksum algorithms MUST only consist of ASCII
characters with the modification that uppercase characters are excluded.
The Tus-Checksum-Algorithm header MUST be included in the response to an
OPTIONS request.
If the hash cannot be calculated at the beginning of the upload, it MAY be
included as a trailer. If the Server can handle trailers, this behavior MUST be
announced by adding checksum-trailer to the Tus-Extension header.
Trailers, also known as trailing headers, are headers which are sent after the
request's body has been transmitted already. Following
RFC 7230 they
MUST be announced using the Trailer header and are only allowed in chunked
transfers.
The Tus-Checksum-Algorithm response header MUST be a comma-separated list of
the checksum algorithms supported by the server.
The Upload-Checksum request header contains information about the checksum of
the current body payload. The header MUST consist of the name of the used
checksum algorithm and the Base64 encoded checksum separated by a space.
Request:
OPTIONS /files HTTP/1.1
Host: tus.example.org
Response:
HTTP/1.1 204 No Content
Tus-Resumable: 1.0.0
Tus-Version: 1.0.0
Tus-Extension: checksum
Tus-Checksum-Algorithm: md5,sha1,crc32
Request:
PATCH /files/17f44dbe1c4bace0e18ab850cf2b3a83 HTTP/1.1
Content-Length: 11
Upload-Offset: 0
Tus-Resumable: 1.0.0
Upload-Checksum: sha1 Kq5sNclPz7QV2+lfQIuc6R7oRu0=
hello world
Response:
HTTP/1.1 204 No Content
Tus-Resumable: 1.0.0
Upload-Offset: 11
This extension defines a way for the Client to terminate completed and unfinished uploads allowing the Server to free up used resources.
If this extension is supported by the Server, it MUST be announced by adding
termination to the Tus-Extension header.
When receiving a DELETE request for an existing upload the Server SHOULD free
associated resources and MUST respond with the 204 No Content status
confirming that the upload was terminated. For all future requests to this URL,
the Server SHOULD respond with the 404 Not Found or 410 Gone status.
Request:
DELETE /files/24e533e02ec3bc40c387f1a0e460e216 HTTP/1.1
Host: tus.example.org
Content-Length: 0
Tus-Resumable: 1.0.0
Response:
HTTP/1.1 204 No Content
Tus-Resumable: 1.0.0
This extension can be used to concatenate multiple uploads into a single one enabling
Clients to perform parallel uploads and to upload non-contiguous chunks. If the
Server supports this extension, it MUST add concatenation to the
Tus-Extension header.
A partial upload represents a chunk of a file. It is constructed by including the
Upload-Concat: partial header while creating a new upload using the
Creation extension. Multiple partial uploads are concatenated
into a final upload in the specified order. The Server SHOULD NOT process these
partial uploads until they are concatenated to form a final upload. The length of the
final upload MUST be the sum of the length of all partial uploads.
In order to create a new final upload, the Client MUST add the Upload-Concat header
to the upload creation request. The value MUST be final followed by a semicolon
and a space-separated list of the partial upload URLs that need to be concatenated.
The partial uploads MUST be concatenated as per the order specified in the list.
This concatenation request SHOULD happen after all of the corresponding partial uploads
are completed. The Client MUST NOT include the Upload-Length header in the final
upload creation.
The Client MAY send the concatenation request while the partial uploads are still
in progress. This feature MUST be explicitly announced by the Server by adding
concatenation-unfinished to the Tus-Extension header.
When creating a new final upload the partial uploads' metadata SHALL NOT be
transferred to the new final upload. All metadata SHOULD be included in the
concatenation request using the Upload-Metadata header.
The Server MAY delete partial uploads after concatenation. They MAY however be used multiple times to form a final resource.
The Server MUST respond with the 403 Forbidden status to PATCH requests against
a final upload URL and MUST NOT modify the final or its partial uploads.
The response to a HEAD request for a final upload SHOULD NOT contain the Upload-Offset
header unless the concatenation has been successfully finished. After successful
concatenation, the Upload-Offset and Upload-Length MUST be set and their values MUST be
equal. The value of the Upload-Offset header before concatenation is not defined for a
final upload.
The response to a HEAD request for a partial upload MUST contain the Upload-Offset header.
The Upload-Length header MUST be included if the length of the final resource can
be calculated at the time of the request. Response to HEAD request against partial
or final upload MUST include the Upload-Concat header and its value as received in
the upload creation request.
The Upload-Concat request and response header MUST be set in both partial and final upload creation
requests. It indicates whether the upload is either a partial
or final upload. If the upload is a partial one, the header value MUST be partial.
In the case of a final upload, its value MUST be final followed by a
semicolon and a space-separated list of partial upload URLs that will be
concatenated. The partial uploads URLs MAY be absolute or relative and MUST NOT contain
spaces as defined in RFC 3986.
In the following example, the Host and Tus-Resumable headers are omitted for
readability although they are required by the specification.
In the beginning two partial uploads are created:
POST /files HTTP/1.1
Upload-Concat: partial
Upload-Length: 5
HTTP/1.1 201 Created
Location: https://tus.example.org/files/a
POST /files HTTP/1.1
Upload-Concat: partial
Upload-Length: 6
HTTP/1.1 201 Created
Location: https://tus.example.org/files/b
You are now able to upload data to the two partial resources using PATCH
requests:
PATCH /files/a HTTP/1.1
Upload-Offset: 0
Content-Length: 5
hello
HTTP/1.1 204 No Content
PATCH /files/b HTTP/1.1
Upload-Offset: 0
Content-Length: 6
world
HTTP/1.1 204 No Content
In the first request, the string hello was uploaded while the second file now
contains world with a leading space.
The next step is to create the final upload consisting of the two earlier
generated partial uploads. In the following request, no Upload-Length header is
presented.
POST /files HTTP/1.1
Upload-Concat: final;/files/a /files/b
HTTP/1.1 201 Created
Location: https://tus.example.org/files/ab
The length of the final resource is now 11 bytes consisting of the string
hello world.
HEAD /files/ab HTTP/1.1
HTTP/1.1 200 OK
Upload-Length: 11
Upload-Concat: final;/files/a /files/b
With this extension, Clients can authenticate follow-up requests to a Creation, Creation With Upload or Concatenation
POST request using a high-entropy cryptographic random shared secret - and challenges
based thereon. The goal is that only the user, who created the upload, should be able to
obtain information about the upload and continue the upload.
If the Server supports this extension, it MUST add challenge to the Tus-Extension header.
The Client MAY add the Upload-Secret header to POST requests, if it wants to protect the
upload using the Challenge extension. All subsequent request targeting that upload resource MUST contain
the corresponding Upload-Challenge header. These requests include, but are not limited to:
HEADrequests to an upload URLPATCHrequests to an upload URLDELETErequests to an upload URLHEADrequests to the upload creation URL with anUpload-TagheaderPOSTrequests to the upload creation URL with anUpload-Concatheader
The Server MUST support at least the SHA256 challenge algorithm identified
by sha256. The names of the challenge algorithms MUST only consist of ASCII
characters with the modification that uppercase characters are excluded.
The Tus-Challenge-Algorithm header MUST be included in the response to an
OPTIONS request.
If the request includes a challenge algorithm which is not supported by the Server or an
otherwise syntactically invalid Upload-Challenge header, the Server MUST respond with
a 400 Bad Request status. Furthermore, Servers MUST respond with a 404 Not Found
status to requests with a missing or mismatching Upload-Challenge value if they
relate to an upload resource for which an Upload-Secret was provided upon creation.
The connection between the Client and the Server SHOULD be encrypted and protected against tampering and eavesdropping using HTTPS. Otherwise the protection provided by the Challenge extension can be undermined.
The Upload-Secret MUST be a high-entropy cryptographic random string consisting
of only following, printable ASCII characters:
!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
This list contains the ASCII characters with a decimal code in the range of [33, 126]. Be aware
that this list does neither contain the "space" character (decimal code: 32) nor the "delete" character
(decimal code: 127).
In addition, the length of the header's value MUST be between 48 and 256 characters.
The Upload-Secret header MUST NOT be included with anything but POST requests
that create a new upload resource. Servers receiving an Upload-Secret header with
any other request MUST respond with a 400 Bad Request status.
The value of Upload-Challenge MUST be computed as follows:
Upload-Challenge = [Hash Name] + " " + Hash([HTTP Method] + [Upload-Offset] + [Upload-Secret]))
with following replacements:
[Hash Name]MUST be replaced by the hashing algorithm used for computing the challenge value as contained in theTus-Challenge-Algorithmresponse header.[HTTP Method]MUST be replaced by the effective HTTP method of the request that theUpload-Challengeis sent with. If theX-HTTP-Method-Overrideheader is used in the same request, it MUST be replaced with the value ofX-HTTP-Method-Override. The HTTP method MUST be upper-case.[Upload-Offset]MUST be replaced with the value of the request'sUpload-Offsetheader, if the request includes this header (e.g. forPATCHrequests). If the request does not include theUpload-Offsetheader, it MUST be replaced with the character#.[Upload-Secret]MUST be replaced with the value of theUpload-Secretheader from thePOSTrequest that created the upload resource.
The input of the hash algorithm (denoted by Hash in the above formula) MUST be encoded as
an ASCII string. The raw output of the hash algorithm MUST then be Base64 encoded.
For requests that reference multiple upload resources (e.g. when using the Concatenation extension),
the Upload-Challenge is computed by concatenating the Upload-Challenges of the individual upload resources for the request in the
order they are referenced. The checksum computed over the concatenated Upload-Challenges
is then used as the Upload-Challenge for the request:
Upload-Challenge = [Hash Name] + " " + Hash([Upload-Challenge for resource 1] + … + [Upload-Challenge for resource n])
For upload resources that were created without an Upload-Secret, the path to the upload resource
MUST be used as Upload-Challenge for the purpose of computing the Upload-Challenge for
requests that reference multiple upload resources. The Upload-Challenge header SHOULD only be used
for requests referencing multiple upload resources if at least one of them has been created with
an Upload-Secret.
The Tus-Challenge-Algorithm response header MUST be a comma-separated list of
the challenge algorithms supported by the server.
An upload resource is created with Creation With Upload and an Upload-Secret:
POST /files HTTP/1.1
Upload-Length: 100
Upload-Secret: R290Y2hhISBVc2UgYW4gYWN0dWFsIGhpZ2gtZW50cm9weSBzb3
Content-Length: 5
Content-Type: application/offset+octet-stream
Tus-Resumable: 1.0.0
hello
The upload is continued with a PATCH request, including an Upload-Challenge computed as
Upload-Challenge = "sha256" + " " + SHA256("PATCH" + "5" + "R290Y2hhISBVc2UgYW4gYWN0dWFsIGhpZ2gtZW50cm9weSBzb3")
and included in the request:
PATCH /files/24e533e02ec3bc40c387f1a0e460e216 HTTP/1.1
Upload-Offset: 5
Upload-Challenge: sha256 B6KrLwZkX3ZLYk5AjZJ6aaOt9G90+h7k/f/0P2bDTDc=
Content-Length: 50
Content-Type: application/offset+octet-stream
Tus-Resumable: 1.0.0
[50 bytes of content]
Then, a DELETE request for the upload is sent, including an Upload-Challenge computed as
Upload-Challenge = "sha256" + " " + SHA256("DELETE" + "#" + "R290Y2hhISBVc2UgYW4gYWN0dWFsIGhpZ2gtZW50cm9weSBzb3")
and included in the request:
DELETE /files/24e533e02ec3bc40c387f1a0e460e216 HTTP/1.1
Content-Length: 0
Upload-Challenge: sha256 2ziZxDsTmDLSP2j84hrwUqnMpWfVd4bdiCTXdGNRmig=
Tus-Resumable: 1.0.0
Two uploads - each with its own Upload-Secret - are concatenated, including an Upload-Challenge. For /files/a, the Upload-Challenge is computed as:
Upload-Challenge A
= "sha256" + " " + SHA256("POST" + "#" + "VGhpcyBpc24ndCBoaWdoLWVudHJvcHkgZWl0aGVyLiBEb24ndC")
= "sha256 Visz7P4U/MLdQn1qqRTRZ7OUfhkiidxsAR2M14VcigY="
For /files/b, the Upload-Challenge is computed as:
Upload-Challenge B
= "sha256" + " " + SHA256("POST" + "#" + "M3JkIHRpbWUncyBhIGNoYXJtISBPciBzbyB0aGV5IHNheS4gRG")
= "sha256 vAIgwoKFKtNujEDNnk2zARj8oFQbuJLLzehLIQ9Q1iI="
Finally, the challenges of the two files are concatenated in the order they are referenced in the request, and then hashed:
Upload-Challenge
= "sha256" + " " + SHA256("sha256 Visz7P4U/MLdQn1qqRTRZ7OUfhkiidxsAR2M14VcigY=" + "sha256 vAIgwoKFKtNujEDNnk2zARj8oFQbuJLLzehLIQ9Q1iI=")
= "sha256 c1mU3n1Dn1qKFAgV08Tj6JPjfcDavuMBq15jM0j4svw="
The resulting Upload-Challenge is then sent with the request:
POST /files HTTP/1.1
Upload-Concat: final;/files/a /files/b
Upload-Challenge: sha256 c1mU3n1Dn1qKFAgV08Tj6JPjfcDavuMBq15jM0j4svw=
Content-Length: 0
Tus-Resumable: 1.0.0
Extending this example with a third file, /files/c - uploaded without Upload-Secret, the computation of Upload-Challenge uses the file's path:
Upload-Challenge
= "sha256" + " " + SHA256("sha256 Visz7P4U/MLdQn1qqRTRZ7OUfhkiidxsAR2M14VcigY=" + "sha256 vAIgwoKFKtNujEDNnk2zARj8oFQbuJLLzehLIQ9Q1iI=" + "/files/c")
= "sha256 kqefPn7i1b6q4TbGaE3gp5WWoRo/BF6KkmuuNqpBmg8="
The resulting Upload-Challenge is then sent with the request:
POST /files HTTP/1.1
Upload-Concat: final;/files/a /files/b /files/c
Upload-Challenge: sha256 kqefPn7i1b6q4TbGaE3gp5WWoRo/BF6KkmuuNqpBmg8=
Content-Length: 0
Tus-Resumable: 1.0.0
With this extension, Clients can provide a tag for an upload, with which they can later retrieve the upload URL for the created upload. This allows Clients to resume an upload they initiated, but for which they did not receive the response with the newly created upload's URL (for example due to a broken connection).
If the Server supports this extension, it MUST add upload-tag to the Tus-Extension
header.
To initiate an upload with Upload Tag, Clients MUST include an Upload-Tag
header with the initial POST request (as specified in the Creation,
Creation With Upload and Concatenation
extensions) made to the upload creation URL.
Clients MAY then send a HEAD request with the same Upload-Tag header to the
Upload Creation URL. Upon success, the Server MUST respond with the 200 OK or 204 No Content
status and the corresponding upload URL in the response's Location header. The
response MUST also include all other headers that a HEAD request to
the upload URL would also return, such as the Upload-Offset header.
Clients SHOULD then use the returned upload URL in the Location header to resume the upload.
If the upload tag in a HEAD request is unknown or no longer known by the Server, it MUST
respond with the 404 Not Found or 410 Gone status.
If the Upload-Tag header in a HEAD request to the upload creation URL is missing, the
Server MUST respond with the 400 Bad Request status.
If the Upload-Tag header is invalid in a POST or HEAD request, the Server MUST
respond with the 400 Bad Request status.
If the upload tag in a POST request is already in use for a different, ongoing upload, the Server
MUST respond with a 409 Conflict status.
The Upload-Tag request header MUST be an identifier created by the Client. The
identifier SHOULD be unique to avoid collisions with identifiers created by other Clients.
Clients can satisfy this requirement by generating and using a version 4 UUID.
The header's value MUST only consist of following, printable ASCII characters:
!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
This list contains the ASCII characters with a decimal code in the range of [33, 126]. Be aware
that this list does neither contain the "space" character (decimal code: 32) nor the "delete" character
(decimal code: 127).
In addition, the length of the header's value MUST NOT exceed 256 characters.
The Upload-Tag header MUST be included with the POST request that creates
the upload. It MUST also be sent with a follow-up HEAD request used to retrieve the
Location header of the newly created upload.
To protect against attackers trying to guess an upload tag and subsequently
use it to inject malicious content into an upload, Servers SHOULD take measures to
ensure that only the party that created a resource with an Upload-Tag header can use it
for subseqeuent HEAD requests.
One way servers can satisfy this recommendation is to leverage available authentication information to bind the upload tag to a particular user, so that only this specific user can use the upload tag.
Servers SHOULD respond with a 404 Not Found status to HEAD requests that include an
Upload-Tag header if the request can't be attributed to the original creator of the
referenced upload resource.
The Client attempts to create and upload a file that is 100 bytes in length:
Request:
POST /files HTTP/1.1
Authorization: …
Upload-Tag: 0CAF16BD-F7A6-47A9-B3D9-CA98BA7DF5EF
Upload-Length: 100
Content-Length: 100
Content-Type: application/offset+octet-stream
Tus-Resumable: 1.0.0
hello[connection breaks down]
The connection is then interrupted, so that only the first 5 bytes of the upload are
received by the Server. Meanwhile the Client could not receive the response with the
Location header.
To resume the upload, the Client sends a HEAD request to the same URL and includes
the same Upload-Tag as in the POST request:
Request:
HEAD /files HTTP/1.1
Authorization: …
Upload-Tag: 0CAF16BD-F7A6-47A9-B3D9-CA98BA7DF5EF
Tus-Resumable: 1.0.0
The Server responds with a 204 No Content status, the URL of the created resource in
the Location header and the number of received bytes in the Upload-Offset header:
Response:
HTTP/1.1 204 No Content
Location: https://tus.example.org/files/0e460e21624c387f1ae533e02ec3bc40
Upload-Offset: 5
Upload-Length: 100
Tus-Resumable: 1.0.0
The Client can now resume the upload using the Location URL and Upload-Offset header.
The FAQ is available online at https://tus.io/faq.html.
Licensed under the MIT license, see LICENSE.txt.
Copyright (c) 2013-2016 Transloadit Ltd and Contributors.