Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

65FZ802B no longer working in homebridge #111

Open
mike3177 opened this issue Jan 9, 2023 · 19 comments
Open

65FZ802B no longer working in homebridge #111

mike3177 opened this issue Jan 9, 2023 · 19 comments

Comments

@mike3177
Copy link

mike3177 commented Jan 9, 2023

My 65FZ802B no longer works in homebridge. I uninstalled and started over but get the message to check the TV is on and remote app settings are correctly set. The TV works fine with TV remote 3.

HB is running on a Synology NAS within docker. I recently upgraded to DSM 7 and it might have stopped working at that point but I’m not sure.
@AntonioMeireles
Copy link
Owner

hi

thanks for reporting.

when did this start to happening ?

i did some changes in v4.0.47 that may had unfortunate side impacts ...

can you check if v4.0.46 also fails?. (if yes, issue not related to my latest 'fixes')

thanks in advance!

António

@mike3177
Copy link
Author

mike3177 commented Jan 9, 2023

I think in the last week perhaps? I know I updated some HB plug ins when I installed DSM 7.

I’m running .47, how do in install an earlier build sorry?

Thanks!

@AntonioMeireles
Copy link
Owner

npm update [email protected] shoulds get you in previous release.

(FWIW 4.0.47 was released latest saturday (07/January))

All the best, and thansk for your patience!

@mike3177
Copy link
Author

mike3177 commented Jan 9, 2023

Partial success.

.46 allows me to go through the pairing process and I get onscreen confirmation that the pairing is successful after entering the code but the plug-in isn’t saving/remembering the TV!

thanks

AntonioMeireles added a commit that referenced this issue Jan 9, 2023
@AntonioMeireles
fix regression introduced in v4.0.47 in vieraFinder
559c565 
- spotted via #111

Signed-off-by: António Meireles <[email protected]>
@AntonioMeireles
Copy link
Owner

OK,

at least one issue found.

can you try please just released [email protected].

Hopefully will get things move forward.

And thanks yet again for your patience!

@mike3177
Copy link
Author

mike3177 commented Jan 9, 2023

Installed .48 but original problem returned, unable to edit message pops up.

@AntonioMeireles
Copy link
Owner

AntonioMeireles commented Jan 9, 2023 via email

@mike3177
Copy link
Author

mike3177 commented Jan 9, 2023

[1/9/2023, 10:43:13 PM] [Homebridge UI] Running Command: npm install --save [email protected]
[1/9/2023, 10:44:07 PM] [Homebridge UI] [homebridge-vieramatic] Incoming Request: /ping
[1/9/2023, 10:44:09 PM] [Homebridge UI] [homebridge-vieramatic] ---> (ping) 192.168.0.26 false
[1/9/2023, 10:44:31 PM] [Homebridge UI] [homebridge-vieramatic] Terminating child process...
[1/9/2023, 10:44:31 PM] [Homebridge UI] [homebridge-vieramatic] Child process ended
[1/9/2023, 10:45:30 PM] [Homebridge UI] [homebridge-vieramatic] Incoming Request: /ping
[1/9/2023, 10:45:31 PM] [Homebridge UI] [homebridge-vieramatic] ---> (ping) 192.168.0.26 false
[1/9/2023, 10:45:58 PM] [Homebridge UI] [homebridge-vieramatic] Terminating child process...
[1/9/2023, 10:45:58 PM] [Homebridge UI] [homebridge-vieramatic] Child process ended
[1/9/2023, 10:47:18 PM] [Homebridge UI] [homebridge-vieramatic] Incoming Request: /ping
[1/9/2023, 10:47:20 PM] [Homebridge UI] [homebridge-vieramatic] ---> (ping) 192.168.0.26 false
[1/9/2023, 10:48:26 PM] [Homebridge UI] [homebridge-vieramatic] Terminating child process...
[1/9/2023, 10:48:26 PM] [Homebridge UI] [homebridge-vieramatic] Child process ended

@AntonioMeireles
Copy link
Owner

OK, thanks. can you atatch here the full (container/homebridge) logs ?

BTW, Do you have any chance to run homebridge and the plugin locally to take the synology NAS out of the equation ?

Thanks in advance!

@mike3177
Copy link
Author

I only have it on the nas sorry

@AntonioMeireles
Copy link
Owner

can you check to see if the just released [email protected] moves things forwad ?

All the best, and a great weekend too!

António

@mike3177
Copy link
Author

Same as before unfortunately, it gets as far as tv confirmation of pairing complete but the plug-in isn’t saving/remembering the tv!

hope you also had a great weekend thanks.

@mike3177
Copy link
Author

Tried deleting all pairings from tv and deleted/reinstalled tv remote 3 without issue. Plug-in still not remembering the pairing.

@AntonioMeireles
Copy link
Owner

AntonioMeireles commented Jan 15, 2023 •
edited
Loading

@mike3177

thanks for getting back. trying to find a way to reproduce this. will get back to you soon!

@DEEJCUK
Copy link

DEEJCUK commented Feb 4, 2023 •
edited
Loading

pairing seemed to work once, then seeing the same issues but also

[2/4/2023, 9:48:05 PM] [PanasonicVieraTV] Initializing 'TV' first time ever.
homebridge | [2/4/2023, 9:48:05 PM] [PanasonicVieraTV] Unable to finish initial setup of TV. Unable to fetch Apps list from the TV: X_AppList returned originally:
homebridge |
homebridge | <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
homebridge | <s:Body>
homebridge | <u:X_EncryptedCommandResponse xmlns:u="urn:panasonic-com:service:p00NetworkControl:1">
homebridge |
homebridge | </u:X_EncryptedCommandResponse>
homebridge | </s:Body>
homebridge | </s:Envelope>
homebridge | .. This TV must be powered ON and NOT in stand-by.

this is in docker image: oznu/homebridge:2022-11-14
tried latest as well

@DEEJCUK
Copy link

DEEJCUK commented Feb 4, 2023

pairing seemed to work once, then seeing the same issues but also

[2/4/2023, 9:48:05 PM] [PanasonicVieraTV] Initializing 'TV' first time ever. homebridge | [2/4/2023, 9:48:05 PM] [PanasonicVieraTV] Unable to finish initial setup of TV. Unable to fetch Apps list from the TV: X_AppList returned originally: homebridge | homebridge | <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"> homebridge | <s:Body> homebridge | <u:X_EncryptedCommandResponse xmlns:u="urn:panasonic-com:service:p00NetworkControl:1"> homebridge | homebridge | </u:X_EncryptedCommandResponse> homebridge | </s:Body> homebridge | </s:Envelope> homebridge | .. This TV must be powered ON and NOT in stand-by.

this is in docker image: oznu/homebridge:2022-11-14 tried latest as well

of course i just did something in the UI (removed authentication) and it started working!

@mike3177
Copy link
Author

Updated to v4.0.50 but problem persists. It goes through the pairing process but the plug-in doesn’t remember the TV. As soon as the pairing is complete there’s nothing there.

@mike3177
Copy link
Author

Are there any updates on this? Seems like a few issues being reported where the plug in doesn’t remember the TV.

@recipriversexcluson
Copy link

Same issue here. I've had to open this up in Home Assistant to HomeKit instead as a remote* panasonic_tv entity which works for some reason but no luck in Homebridge.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
4 participants
@AntonioMeireles @recipriversexcluson @DEEJCUK @mike3177