bring up to date

MarlinFirmware · Jan 25, 2025 · c459289 · c459289
1 parent 1618683
commit c459289
Show file tree

Hide file tree

Showing 4 changed files with 25 additions and 5 deletions.
diff --git a/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration.h b/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration.h
@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -604,6 +604,10 @@
   #define MAX31865_SENSOR_OHMS_2      100
   #define MAX31865_CALIBRATION_OHMS_2 430
 #endif
+#if TEMP_SENSOR_IS_MAX_TC(BED)
+  #define MAX31865_SENSOR_OHMS_BED      100
+  #define MAX31865_CALIBRATION_OHMS_BED 430
+#endif
 
 #if HAS_E_TEMP_SENSOR
   #define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
@@ -2109,6 +2113,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Commands to execute at the start of G29 probing,
+ * after switching to the PROBING_TOOL.
+ */
+//#define EVENT_GCODE_BEFORE_G29 "M300 P440 S200"
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

diff --git a/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration_adv.h b/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration_adv.h
@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm

diff --git a/config/examples/Materia101/Configuration.h b/config/examples/Materia101/Configuration.h
@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -604,6 +604,10 @@
   #define MAX31865_SENSOR_OHMS_2      100
   #define MAX31865_CALIBRATION_OHMS_2 430
 #endif
+#if TEMP_SENSOR_IS_MAX_TC(BED)
+  #define MAX31865_SENSOR_OHMS_BED      100
+  #define MAX31865_CALIBRATION_OHMS_BED 430
+#endif
 
 #if HAS_E_TEMP_SENSOR
   #define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
@@ -2109,6 +2113,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Commands to execute at the start of G29 probing,
+ * after switching to the PROBING_TOOL.
+ */
+//#define EVENT_GCODE_BEFORE_G29 "M300 P440 S200"
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
@@ -2433,7 +2443,7 @@
  */
 #define EEPROM_SETTINGS       // Persistent storage with M500 and M501
 //#define DISABLE_M503        // Saves ~2700 bytes of flash. Disable for release!
-#define EEPROM_CHITCHAT       // Give feedback on EEPROM commands. Disable to save PROGMEM.
+#define EEPROM_CHITCHAT       // Give feedback on EEPROM commands. Disable to save flash.
 #define EEPROM_BOOT_SILENT    // Keep M503 quiet and only give errors during first load
 #if ENABLED(EEPROM_SETTINGS)
   //#define EEPROM_AUTO_INIT  // Init EEPROM automatically on any errors.

diff --git a/config/examples/Materia101/Configuration_adv.h b/config/examples/Materia101/Configuration_adv.h
@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm