Added cjose library. #44

siepkes · 2019-03-14T20:33:25Z

cjose is a C library implementing the Javascript Object Signing and Encryption (JOSE).

I need this library so I can add mod_auth_openidc. I'm not a pkgsrc pro so I would appreciate it if someone could take a good look before merging 😉

iamleot · 2019-03-14T20:43:04Z

Hello Jasper, Jasper Siepkes writes:

cjose is a C library implementing the Javascript Object Signing and Encryption (JOSE). I need this library so I can add [mod_auth_openidc](https://github.com/zmartzone/mod_auth_openidc). I'm not a pkgsrc pro so I would appreciate it if someone could take a good look before merging 😉

Sure! Possible comments directly inline! (mostly just cosmetic to simplify a bit)

--- /dev/null +++ b/textproc/cjose/Makefile @@ -0,0 +1,24 @@ +# $NetBSD$ + +DISTNAME= cjose-0.6.1 +GITHUB_PROJECT= cjose +PKGNAME= ${GITHUB_PROJECT}-${DISTNAME} +CATEGORIES= textproc +MASTER_SITES= ${MASTER_SITE_GITHUB:=cisco/} +DIST_SUBDIR= ${GITHUB_PROJECT} +

You can probably just set DISTNAME to `cjose-0.6.1' and remove GITHUB_PROJECT (it is already cjose by default), PKGNAME and DIST_SUBDIR. After that please rerun `make checksum' because it will result in changes to `distinfo' too.

+WRKSRC= ${WRKDIR}/cjose-0.6.1

WRKSRC redefinition can be removed as well with the previous suggested change. Thank you!

iamleot · 2019-03-14T20:53:34Z

Jasper Siepkes writes:

cjose is a C library implementing the Javascript Object Signing and Encryption (JOSE). I need this library so I can add [mod_auth_openidc](https://github.com/zmartzone/mod_auth_openidc). I'm not a pkgsrc pro so I would appreciate it if someone could take a good look before merging 😉

Possible side-note - especially when packaging a particular software involves packaging several libraries - it is usually easier to directly commit them to pkgsrc-wip and then ask for a review on tech-pkg@ mailing list! :) To learn more about pkgsrc-wip please give a look to: <https://www.pkgsrc.org/wip/users/>

siepkes · 2019-03-14T21:15:44Z

@iamleot You people are fast!

You can probably just set DISTNAME to cjose-0.6.1' and remove GITHUB_PROJECT (it is already cjose by default), PKGNAME and DIST_SUBDIR. After that please rerun make checksum' because it will result in changes to `distinfo' too.

Done!

WRKSRC redefinition can be removed as well with the previous suggested change.

Done!

I'll take a look at pkgsrc-wip. Though luckily for me cjose was the only un-packaged dependency for mod_auth_openidc. Thanks for the feedback!

krytarowski · 2019-03-14T22:56:21Z

textproc/cjose/Makefile

+
+PKGCONFIG_OVERRIDE+=	cjose.pc.in
+
+.include "../../textproc/jansson/buildlink3.mk"


It's a nit, but long term we prefer to maintain sorted includes (with exception of mk/bsd.pkg.mk that comes the last).

Fair enough! Ordered them alphabetically (I assume that's what you mean, right?).

Maybe this would also be something that could be integrated in to pkglint?

Right. It would be a valuable addition to pkglint. Feel free to report it to the maintainer (or contribute a patch which would be even better).

iamleot · 2019-03-15T09:41:03Z

Jasper Siepkes writes:

[...] Maybe this would also be something that could be integrated in to `pkglint`?

Most of the times sorting them is okay but sometimes can be problematic too, I'm not sure if this can be good to add such "linting" (maybe it can be a `NOTE:' but sorting them without testing can leads to possible problems). E.g. on vim-gtk3 by sorting the gtk3 bl3 inclusion before libXpm and libXt bl3 inclusions led to a failure at link time while previously it was accidentally built fine but without GTK3+ support. If you are curious about that please give a look to: <https://mail-index.NetBSD.org/pkgsrc-changes/2019/01/14/msg185746.html>

krytarowski · 2019-03-15T09:44:46Z

E.g. on vim-gtk3 by sorting the gtk3 bl3 inclusion before libXpm and libXt bl3 inclusions led to a failure at link time while previously it was accidentally built fine but without GTK3+ support.

Isn't that a bug in blk3.mk files? Anyway it has to be done diligently.

siepkes · 2019-03-15T10:56:39Z

@iamleot I just noticed that after removing the suggested headers pkgsrc can't find the package on Github (curl get's a 404). The only way I could get it to work is if I do it like this:

DISTNAME=       cjose-${GITHUB_TAG}
CATEGORIES=     textproc
MASTER_SITES=   ${MASTER_SITE_GITHUB:=cisco/}
GITHUB_TAG=     0.6.1

Is this correct om am I missing something?

iamleot · 2019-03-15T11:11:39Z

Jasper Siepkes writes:

@iamleot I just noticed that after removing the suggested headers pkgsrc can't find the package on Github (curl get's a 404). The only way I could get it to work is if I do it like this: ``` DISTNAME= cjose-${GITHUB_TAG} CATEGORIES= textproc MASTER_SITES= ${MASTER_SITE_GITHUB:=cisco/} GITHUB_TAG= 0.6.1 ``` Is this correct om am I missing something?

Just setting DISTNAME to `cjose-0.6.1' and removing GITHUB_TAG should be enough. If this doesn't work can you please share the logs and share the output of `make show-all-github'? Thanks!

cjose is a C library implementing the Javascript Object Signing and Encryption (JOSE).

siepkes · 2019-03-15T12:19:37Z

Just setting DISTNAME to `cjose-0.6.1' and removing GITHUB_TAG should be enough.

Actually it seems it is. Don't know what went wrong when I was testing...Probably need more coffee.

So as far as I can tell this thing is pretty complete now?

2.62.0 (stable): Glib: * Add ustring::make_valid() (Krzysztof Piecuch) Bug #780075 (Martin Ejdestig) Merge request !11 Issue #40 (Tanu Kaskinen) * Use convert_return_gchar_ptr_to_*() in a couple of ustring methods (Martin Ejdestig) Merge request !11 * Add ustring::sprintf(), wrapping g_strdup_printf() (Daniel Boles) Issue #21 * Fix callback races in glibmm when GSource is destructed (Dainis Jonitis) Issue #41 * Checksum, Datetime, TimeZone: Add Glib::Value specializations (Kjell Ahlstedt) * Property: Add const get_proxy() returning ReadOnly Getting Proxy from ReadOnly is const (Daniel Boles) Issue #44 * Property: Update for compatibility with Gtk::Builder (Kjell Ahlstedt) * Fix memory leak in Variant<std::tuple<>>::create() (Van de Bugger, Kjell Ahlstedt) Issue #48 * Deprecate TimeVal (Kjell Ahlstedt) Gio: * Add Application::add_option_group() (Kjell Ahlstedt Issue #46 (Patrick Storz) * DBus::Object: Fix refcounts in some vfuncs (Kjell Ahlstedt) * Gio::DBus: Add ObjectProxy, ObjectSkeleton, ObjectManager, ObjectManagerClient, ObjectManagerServer (Kjell Ahlstedt) Issue #43 (Martin Ejdestig) * Drive, MountOperation, ThemedIcon, TlsDatabase, VolumeMonitor: Fix ownership of some lists and arrays (Fixes memory leaks and dangling pointers) (Kjell Ahlstedt) * Add SocketControlMessage::add_deserialize_func() (Kjell Ahlstedt) Issue #52 (Ankur deep jaiswal) gmmproc: * Update for new glib deprecation macros (Kjell Ahlstedt) Build: * Require glib-2.0 >= 2.61.2 (Kjell Ahlstedt) Documentation: * Glib::init(), Gio::init(): Improve the documentation (Kjell Ahlstedt) Issue #49 (Van de Bugger) * Glib::ustring can't always replace std::string (Kjell Ahlstedt) Issue #47 (Patrick Storz)

0.33 2019-03-09 15:18:15 PST - Removed dependency to Digest::SHA1 #45 - Added explicit dep to HTTP::Request::Common #44 - Add t/lib to INC for Perl 5.26+ - Fix POD link 0.32 2019-02-26 14:36:19 MST - Fix dependency for Cookie::Baker 0.31 2019-02-26 12:01:00 MST - Documentation fix - Support samesite cookie attributes #42

@ramhoj

update ruby-arel-helpers to 2.11.0. 2.11.0 * Allow consumers of ArelHelpers::QueryBuilder to chain on falsy return (@ramhoj #44). - Add not_nil in front of builder methods to opt-in. 2.10.0 * Add support for Rails 6 rc2.

## 0.4.0 / 2020-01-18 ### Major Enhancements * Drop Ruby 2.3 support ### Minor Enhancements * Remove parent command's flags from subcommand usage (#44) ### Development Fixes * Adopt Jekyll's rubocop config for consistency ### Documentation * fixes the readme (#52)

Changelog: 3 December 2019: Wouter - Fix #52: do not log transient network full errors unless higher verbosity is set. - Fix checkconf test for new error output string. - tag for 4.2.4rc1 release. 27 November 2017 Jeroen - Fix regressions in configparser.y 22 November 2019: Wouter - Fix #48: Add make distclean that removes config.h made by configure. And add maintainer-clean that removes bison and flex output. 18 November 2019: Wouter - Detect fixed time memcmp for openssl 0.9.8 compatibility. - Detect EC_KEY_new_by_curve_name for openssl 0.9.8. - include limits.h for UINT_MAX. - If no recvmmsg, dont use msg_flags member, but errno for error, where our fallback function left it, msg_flags also does not exist on some systems. - Remove unused variable warning for portability. 14 November 2019: Wouter - Fix checkconf test with filenames that sort in the same order. - Tag for 4.2.3rc1. Branch master is 4.2.4 in development. 11 November 2019: Wouter - Fix #44: document that remote-control is a top-level nsd.conf attribute. - Fix compile on OSX. - Fix for #44: nicer top-level clause documentation. 22 October 2019: Jeroen - Number of different UDP handlers has been reduced to one. recvmmsg and sendmmsg implementations are now used on all platforms. Compatible implementations are in place for systems that lack the system calls. - Socket options are now set in designated functions for easy reuse. - Socket setup has been simplified for easy reuse. - Configuration parser is now aware of the context in which an option was specified. 21 October 2019: Wouter - For #21 add contrib/patch_for_s6_startup_and_other_service_supervisors.diff that adds support for readiness notification with READY_FD from Cameron Nemo. 17 October 2019: Jeroen - Fix #40: Merge small fixes for confine-to-zone by Greg Bock. 15 October 2019: Jeroen - For #39: Merge confine-to-zone feature contributes by Greg Bock. 26 September 2019: Wouter - Fix #38: log address and failure reason with tls handshake errors, squelches (the same as unbound) some unless high verbosity is used. - Fixup clang analysis warning in xfrd_parse_received_xfr_packet master dereference. 25 September 2019: Wouter - The nsd.conf includes are sorted ascending, for include statements with a '*' from glob. 16 September 2019: Wouter - Fixup warnings during --disable-ipv6 compile. - Fixup unit test executable to run without IPv6. 4 September 2019: Wouter - Fix #35: excessive logging of ixfr failures, it stops the log when fallback to axfr is possible. log is enabled at high verbosity. 2 September 2019: Wouter - For #21: pidfile "" allows to run NSD without a pidfile, for startup management tools like daemontools. 28 August 2019: Wouter - In tests check for tls test tool availability.

v3.1.0 ====== #47: ``.open`` now raises ``FileNotFoundError`` and ``IsADirectoryError`` when appropriate. v3.0.0 ====== #44: Merge with v1.2.0. v1.2.0 ====== #44: ``zipp.Path.open()`` now supports a compatible signature as ``pathlib.Path.open()``, accepting text (default) or binary modes and soliciting keyword parameters passed through to ``io.TextIOWrapper`` (encoding, newline, etc). The stream is opened in text-mode by default now. ``open`` no longer accepts ``pwd`` as a positional argument and does not accept the ``force_zip64`` parameter at all. This change is a backward-incompatible change for that single function. v2.2.1 ====== #43: Merge with v1.1.1. v1.1.1 ====== #43: Restored performance of implicit dir computation. v2.2.0 ====== #36: Rebuild package with minimum Python version declared both in package metadata and in the python tag. v2.1.0 ====== #32: Merge with v1.1.0. v1.1.0 ====== #32: For read-only zip files, complexity of ``.exists`` and ``joinpath`` is now constant time instead of ``O(n)``, preventing quadratic time in common use-cases and rendering large zip files unusable for Path. Big thanks to Benjy Weinberger for the bug report and contributed fix (#33). v2.0.1 ====== #30: Corrected version inference (from jaraco/skeleton#12). v2.0.0 ====== Require Python 3.6 or later.

v1.2.0 ====== #44: ``zipp.Path.open()`` now supports a compatible signature as ``pathlib.Path.open()``, accepting text (default) or binary modes and soliciting keyword parameters passed through to ``io.TextIOWrapper`` (encoding, newline, etc). The stream is opened in text-mode by default now. ``open`` no longer accepts ``pwd`` as a positional argument and does not accept the ``force_zip64`` parameter at all. This change is a backward-incompatible change for that single function. v1.1.1 ====== #43: Restored performance of implicit dir computation.

Update ruby-mixlib-authentication to 3.0.6. 3.0.6 (2019-12-30) * Test on Ruby 2.7 + random testing improvements #51 (tas50) * Substitute require for require_relative #52 (tas50) 3.0.4 (2019-10-31) * Add BuildKite PR Testing #47 (tas50) * Update project owner + Remove Travis CI #48 (tas50) * Update mixlib-log requirement from ~> 2 to ~> 3 #50 (dependabot-preview[bot]) 3.0.1 (2019-04-23) * remove hashrocket syntax #40 (lamont-granquist) * Update testing boilerplate #41 (tas50) * Update codeowners and add github PR template #43 (tas50) * Only ship the required libraries in the gem artifact #44 (tas50) * update travis, drop ruby < 2.5, major version bump #45 (lamont-granquist) * Add back Ruby 2.4 support / update testing #46 (tas50)

Update ruby-mixlib-cli to 2.1.5. 2.1.5 (2019-12-22) * Use our standard rakefile #68 (tas50) * Fix chef-style #71 (vsingh-msys) * Add windows PR testing with Buildkite #73 (tas50) * Test on Ruby 2.7 + random testing improvements #75 (tas50) 2.1.1 (2019-06-10) * Don't explode when there are unknown keys in 'config' #66 (marcparadise) 2.1.0 (2019-06-07) * Setup BuildKite for PR testing #61 (tas50) * Disable Travis testing & Update codeowners #62 (tas50) * Fix gem homepage url #64 (tsub) * [MIXLIB-CLI-63] Add deprecated_option support #65 (marcparadise) 2.0.6 (2019-05-14) * Add additional github templates and update codeowners #58 (tas50) * Improve the --help text output of 'in:' #59 (btm) * Print out human readable lists of allowed CLI options #60 (tas50) 2.0.3 (2019-03-20) * fix global state pollution issues across examples #54 (lamont-granquist) * Add back support for Ruby 2.4 #56 (tas50) 2.0.1 (2019-01-04) * Don't ship the test files in the gem artifact #51 (tas50) 2.0.0 (2019-01-04) * remove hashrockets syntax #43 (lamont-granquist) * Remove require rubygems #44 (tas50) * Update testing and contributing boilerplate #45 (tas50) * More testing / release boilerplate #46 (tas50) * Update codeowners and add github PR template #47 (tas50) * Lint the example code #49 (tas50) * update travis, drop ruby < 2.5, major version bump #52 (lamont-granquist) * actually do the major version bump #53 (lamont-granquist)

Update ruby-mercenary to 0.4.0. ## 0.4.0 / 2020-01-18 ### Major Enhancements * Drop Ruby 2.3 support ### Minor Enhancements * Remove parent command's flags from subcommand usage (#44) ### Development Fixes * Adopt Jekyll's rubocop config for consistency ### Documentation * fixes the readme (#52)

Update ruby-diff-lcs to 1.4.4. ## 1.4.4 / 2020-07-01 - Fixed an issue reported by Jun Aruga in the Diff::LCS::Ldiff binary text detection. [#44][] - Fixed a theoretical issue reported by Jun Aruga in Diff::LCS::Hunk to raise a more useful exception. [#43][] - Added documentation that should address custom object issues as reported in [#35][]. - Fixed more diff errors, in part reported in [#65][]. - The use of `Numeric#abs` is incorrect in `Diff::LCS::Block#diff_size`. The diff size _must_ be accurate for correct change placement. - When selecting @max_diff_size in Diff::LCS::Hunk, choose it based on `block.diff_size.abs`. - Made a number of changes that will, unfortunately, increase allocations at the cost of being safe with frozen strings. - Add some knowledge that when `Diff::LCS::Hunk#diff` is called, that we are processing the _last_ hunk, so some changes will be made to how the output is generated. - `old`, `ed`, and `reverse_ed` formats have no differences. - `unified` format will report `\ No newline at end of file` given the correct conditions, at most once. Unified range reporting also differs for the last hunk such that the `length` of the range is reduced by one. - `context` format will report `\No newline at end of file` given the correct conditions, up to once per "file". Context range reporting also differs for the last hunk such that the `end` part of the range is reduced by one to a minimum of one. - Added a bunch more tests for the cases above, and fixed `hunk_spec.rb` so that the phrase being compared isn't nonsense French. - Updated formatting. - Added a Rake task to assist with manual testing on Ruby 1.8. ## 1.4.3 / 2020-06-29 - Fixed several issues with the 1.4 on Rubies older than 2.0. Some of this was providing useful shim functions to Hoe 3.x (which dropped these older Rubies a while ago). Specifically: - Removed Array#lazy from a method in Diff::LCS::Hunk. - Changed some unit tests to use old-style Symbol-keyed hashes. - Changed some unit test helper functions to no longer use keyword parameters, but only a trailing options hash. - Made the use of `psych` dependent on `RUBY_VERSION >= 1.9`. Resolves [#63][]. ## 1.4.2 / 2020-06-23 - Camille Drapier fixed a small issue with RuboCop configuration. [#59][] - Applied another fix (and unit test) to fix an issue for the Chef team. [#60][], [#61][] ## 1.4.1 / 2020-06-23 - Fix an issue where diff sizes could be negative, and they should be. [#57][], [#58][] ## 1.4 / 2020-06-23 - Ruby versions lower than 2.4 are soft-deprecated and will not be run as part of the CI process any longer. - Akinora MUSHA (knu) added the ability for Diff::LCS::Change objects to be implicitly treated arrays. Originally provided as pull request [#47][], but it introduced a number of test failures as documented in [#48][], and remediation of Diff::LCS itself was introduced in [#49][]. - Resolved [#5][] with some tests comparing output from `system` calls to `bin/ldiff` with some pre-generated output. Resolved [#6][] with these tests. - Resolved a previously undetected `bin/ldiff` issue with `--context` output not matching `diff --context` output. - Resolved an issue with later versions of Ruby not working with an `OptParse` specification of `Numeric`; this has been changed to `Integer`. - Brandon Fish added truffleruby in [#52][]. - Fixed two missing classes as reported in [#53]

2.0.3 (2020-08-22) ~~~~~~~~~~~~~~~~~~ - Fix issues when building re2c as a CMake subproject (`#302 <https://github.com/skvadrik/re2c/pull/302>`_: - Final corrections in the SIMPA article "RE2C: A lexer generator based on lookahead-TDFA", https://doi.org/10.1016/j.simpa.2020.100027 2.0.2 (2020-08-08) ~~~~~~~~~~~~~~~~~~ - Enable re2go building by default. - Package CMake files into release tarball. 2.0.1 (2020-07-29) ~~~~~~~~~~~~~~~~~~ - Updated version for CMake build system (forgotten in release 2.0). - Added a short article about re2c for the Software Impacts journal. 2.0 (2020-07-20) ~~~~~~~~~~~~~~~~ - Added new code generation backend for Go and a new ``re2go`` program (`#272 <https://github.com/skvadrik/re2c/issues/272>`_: Go support). Added option ``--lang <c | go>``. - Added CMake build system as an alternative to Autotools (`#275 <https://github.com/skvadrik/re2c/pull/275>`_: Add a CMake build system (thanks to ligfx), `#244 <https://github.com/skvadrik/re2c/issues/244>`_: Switching to CMake). - Changes in generic API: + Removed primitives ``YYSTAGPD`` and ``YYMTAGPD``. + Added primitives ``YYSHIFT``, ``YYSHIFTSTAG``, ``YYSHIFTMTAG`` that allow to express fixed tags in terms of generic API. + Added configurations ``re2c:api:style`` and ``re2c:api:sigil``. + Added named placeholders in interpolated configuration strings. - Changes in reuse mode (``-r, --reuse`` option): + Do not reset API-related configurations in each `use:re2c` block (`#291 <https://github.com/skvadrik/re2c/issues/291>`_: Defines in rules block are not propagated to use blocks). + Use block-local options instead of last block options. + Do not accumulate options from rules/reuse blocks in whole-program options. + Generate non-overlapping YYFILL labels for reuse blocks. + Generate start label for each reuse block in storable state mode. - Changes in start-conditions mode (``-c, --start-conditions`` option): + Allow to use normal (non-conditional) blocks in `-c` mode (`#263 <https://github.com/skvadrik/re2c/issues/263>`_: allow mixing conditional and non-conditional blocks with -c, `#296 <https://github.com/skvadrik/re2c/issues/296>`_: Conditions required for all lexers when using '-c' option). + Generate condition switch in every re2c block (`#295 <https://github.com/skvadrik/re2c/issues/295>`_: Condition switch generated for only one lexer per file). - Changes in the generated labels: + Use ``yyeof`` label prefix instead of ``yyeofrule``. + Use ``yyfill`` label prefix instead of ``yyFillLabel``. + Decouple start label and initial label (affects label numbering). - Removed undocumented configuration ``re2c:flags:o``, ``re2c:flags:output``. - Changes in ``re2c:flags:t``, ``re2c:flags:type-header`` configuration: filename is now relative to the output file directory. - Added option ``--case-ranges`` and configuration ``re2c:flags:case-ranges``. - Extended fixed tags optimization for the case of fixed-counter repetition. - Fixed bugs related to EOF rule: + `#276 <https://github.com/skvadrik/re2c/issues/276>`_: Example 01_fill.re in docs is broken + `#280 <https://github.com/skvadrik/re2c/issues/280>`_: EOF rules with multiple blocks + `#284 <https://github.com/skvadrik/re2c/issues/284>`_: mismatched YYBACKUP and YYRESTORE (Add missing fallback states with EOF rule) - Fixed miscellaneous bugs: + `#286 <https://github.com/skvadrik/re2c/issues/286>`_: Incorrect submatch values with fixed-length trailing context. + `#297 <https://github.com/skvadrik/re2c/issues/297>`_: configure error on ubuntu 18.04 / cmake 3.10 - Changed bootstrap process (require explicit configuration flags and a path to re2c executable to regenerate the lexers). - Added internal options ``--posix-prectable <naive | complex>``. - Added debug option ``--dump-dfa-tree``. - Major revision of the paper "Efficient POSIX submatch extraction on NFA". ---- 1.3x ---- 1.3 (2019-12-14) ~~~~~~~~~~~~~~~~ - Added option: ``--stadfa``. - Added warning: ``-Wsentinel-in-midrule``. - Added generic API primitives: + ``YYSTAGPD`` + ``YYMTAGPD`` - Added configurations: + ``re2c:sentinel = 0;`` + ``re2c:define:YYSTAGPD = "YYSTAGPD";`` + ``re2c:define:YYMTAGPD = "YYMTAGPD";`` - Worked on reproducible builds (`#258 <https://github.com/skvadrik/re2c/pull/258>`_: Make the build reproducible). ---- 1.2x ---- 1.2.1 (2019-08-11) ~~~~~~~~~~~~~~~~~~ - Fixed bug `#253 <https://github.com/skvadrik/re2c/issues/253>`_: re2c should install unicode_categories.re somewhere. - Fixed bug `#254 <https://github.com/skvadrik/re2c/issues/254>`_: Turn off re2c:eof = 0. 1.2 (2019-08-02) ~~~~~~~~~~~~~~~~ - Added EOF rule ``$`` and configuration ``re2c:eof``. - Added ``/*!include:re2c ... */`` directive and ``-I`` option. - Added ``/*!header:re2c:on*/`` and ``/*!header:re2c:off*/`` directives. - Added ``--input-encoding <ascii | utf8>`` option. + `#237 <https://github.com/skvadrik/re2c/issues/237>`_: Handle non-ASCII encoded characters in regular expressions + `#250 <https://github.com/skvadrik/re2c/issues/250>`_ UTF8 enoding - Added include file with a list of definitions for Unicode character classes. + `#235 <https://github.com/skvadrik/re2c/issues/235>`_: Unicode character classes - Added ``--location-format <gnu | msvc>`` option. + `#195 <https://github.com/skvadrik/re2c/issues/195>`_: Please consider using Gnu format for error messages - Added ``--verbose`` option that prints "success" message if re2c exits without errors. - Added configurations for options: + ``-o --output`` (specify output file) + ``-t --type-header`` (specify header file) - Removed configurations for internal/debug options. - Extended ``-r`` option: allow to mix multiple ``/*!rules:re2c*/``, ``/*!use:re2c*/`` and ``/*!re2c*/`` blocks. + `#55 <https://github.com/skvadrik/re2c/issues/55>`_: allow standard re2c blocks in reuse mode - Fixed ``-F --flex-support`` option: parsing and operator precedence. + `#229 <https://github.com/skvadrik/re2c/issues/229>`_: re2c option -F (flex syntax) broken + `#242 <https://github.com/skvadrik/re2c/issues/242>`_: Operator precedence with --flex-syntax is broken - Changed difference operator ``/`` to apply before encoding expansion of operands. + `#236 <https://github.com/skvadrik/re2c/issues/236>`_: Support range difference with variable-length encodings - Changed output generation of output file to be atomic. + `#245 <https://github.com/skvadrik/re2c/issues/245>`_: re2c output is not atomic - Authored research paper "Efficient POSIX Submatch Extraction on NFA" together with Dr Angelo Borsotti. - Added experimental libre2c library (``--enable-libs`` configure option) with the following algorithms: + TDFA with leftmost-greedy disambiguation + TDFA with POSIX disambiguation (Okui-Suzuki algorithm) + TNFA with leftmost-greedy disambiguation + TNFA with POSIX disambiguation (Okui-Suzuki algorithm) + TNFA with lazy POSIX disambiguation (Okui-Suzuki algorithm) + TNFA with POSIX disambiguation (Kuklewicz algorithm) + TNFA with POSIX disambiguation (Cox algorithm) - Added debug subsystem (``--enable-debug`` configure option) and new debug options: + ``-dump-cfg`` (dump control flow graph of tag variables) + ``-dump-interf`` (dump interference table of tag variables) + ``-dump-closure-stats`` (dump epsilon-closure statistics) - Added internal options: + ``--posix-closure <gor1 | gtop>`` (switch between shortest-path algorithms used for the construction of POSIX closure) - Fixed a number of crashes found by American Fuzzy Lop fuzzer: + `#226 <https://github.com/skvadrik/re2c/issues/226>`_, `#227 <https://github.com/skvadrik/re2c/issues/227>`_, `#228 <https://github.com/skvadrik/re2c/issues/228>`_, `#231 <https://github.com/skvadrik/re2c/issues/231>`_, `#232 <https://github.com/skvadrik/re2c/issues/232>`_, `#233 <https://github.com/skvadrik/re2c/issues/233>`_, `#234 <https://github.com/skvadrik/re2c/issues/234>`_, `#238 <https://github.com/skvadrik/re2c/issues/238>`_ - Fixed handling of newlines: + correctly parse multi-character newlines CR LF in ``#line`` directives + consistently convert all newlines in the generated file to Unix-style LF - Changed default tarball format from .gz to .xz. + `#221 <https://github.com/skvadrik/re2c/issues/221>`_: big source tarball - Fixed a number of other bugs and resolved issues: + `#2 <https://github.com/skvadrik/re2c/issues/2>`_: abort + `#6 <https://github.com/skvadrik/re2c/issues/6>`_: segfault + `#10 <https://github.com/skvadrik/re2c/issues/10>`_: lessons/002_upn_calculator/calc_002 doesn't produce a useful example program + `#44 <https://github.com/skvadrik/re2c/issues/44>`_: Access violation when translating the attached file + `#49 <https://github.com/skvadrik/re2c/issues/49>`_: wildcard state \000 rules makes lexer behave weard + `#98 <https://github.com/skvadrik/re2c/issues/98>`_: Transparent handling of #line directives in input files + `#104 <https://github.com/skvadrik/re2c/issues/104>`_: Improve const-correctness + `#105 <https://github.com/skvadrik/re2c/issues/105>`_: Conversion of pointer parameters into references + `#114 <https://github.com/skvadrik/re2c/issues/114>`_: Possibility of fixing bug 2535084 + `#120 <https://github.com/skvadrik/re2c/issues/120>`_: condition consisting of default rule only is ignored + `#167 <https://github.com/skvadrik/re2c/issues/167>`_: Add word boundary support + `#168 <https://github.com/skvadrik/re2c/issues/168>`_: Wikipedia's article on re2c + `#180 <https://github.com/skvadrik/re2c/issues/180>`_: Comment syntax? + `#182 <https://github.com/skvadrik/re2c/issues/182>`_: yych being set by YYPEEK () and then not used + `#196 <https://github.com/skvadrik/re2c/issues/196>`_: Implicit type conversion warnings + `#198 <https://github.com/skvadrik/re2c/issues/198>`_: no match for ‘operator!=’ in ‘i != std::vector<_Tp, _Alloc>::rend() [with _Tp = re2c::bitmap_t, _Alloc = std::allocator<re2c::bitmap_t>]()’ + `#210 <https://github.com/skvadrik/re2c/issues/210>`_: How to build re2c in windows? + `#215 <https://github.com/skvadrik/re2c/issues/215>`_: A memory read overrun issue in s_to_n32_unsafe.cc + `#220 <https://github.com/skvadrik/re2c/issues/220>`_: src/dfa/dfa.h: simplify constructor to avoid g++-3.4 bug + `#223 <https://github.com/skvadrik/re2c/issues/223>`_: Fix typo + `#224 <https://github.com/skvadrik/re2c/issues/224>`_: src/dfa/closure_posix.cc: pack() tweaks + `#225 <https://github.com/skvadrik/re2c/issues/225>`_: Documentation link is broken in libre2c/README + `#230 <https://github.com/skvadrik/re2c/issues/230>`_: Changes for upcoming Travis' infra migration + `#239 <https://github.com/skvadrik/re2c/issues/239>`_: Push model example has wrong re2c invocation, breaks guide + `#241 <https://github.com/skvadrik/re2c/issues/241>`_: Guidance on how to use re2c for full-duplex command & response protocol + `#243 <https://github.com/skvadrik/re2c/issues/243>`_: A code generated for period (.) requires 4 bytes + `#246 <https://github.com/skvadrik/re2c/issues/246>`_: Please add a license to this repo + `#247 <https://github.com/skvadrik/re2c/issues/247>`_: Build failure on current Cygwin, probably caused by force-fed c++98 mode + `#248 <https://github.com/skvadrik/re2c/issues/248>`_: distcheck still looks for README + `#251 <https://github.com/skvadrik/re2c/issues/251>`_: Including what you use is find, but not without inclusion guards - Updated documentation and website.

Change log: 1.5.4 ====== - Update configure.ac.in syntax - Fix #53: taskmanager translations - Translation Updates: Albanian, Basque, Belarusian, Bulgarian, Catalan, Chinese (China), Chinese (Taiwan), Czech, Danish, Dutch, Estonian, French, Galician, German, Greek, Hebrew, Indonesian, Italian, Japanese, Kazakh, Korean, Lithuanian, Norwegian Bokmål, Polish, Portuguese, Portuguese (Brazil), Russian, Serbian, Slovak, Spanish, Swedish, Thai, Turkish, Ukrainian 1.5.3 ====== - Fix rendering bug (Fixes #44) - Fix rendering bug for swap graph (relates to #44) - Fix bindings related to the "show-legend" setting - Allow to copy full process command line (#33) - Rename Private to Resident Bytes (#7) - Avoid grabbing the filter entry if it is not realized - Fix intltool lock file problem during make distcheck - `uid_name` has been removed from `task` struct - Fix invalid casts for "About" and "Help" (Fixes #43) - Show localized website label - Update COPYING (Issue #49) - Updated copyright year, authors, and project links - Translation Updates: Albanian, Arabic, Armenian (Armenia), Asturian, Azerbaijani, Basque, Belarusian, Bulgarian, Catalan, Chinese (China), Chinese (Hong Kong), Chinese (Taiwan), Croatian, Czech, Danish, Dutch, Eastern Armenian, English (Australia), English (United Kingdom), Estonian, Finnish, French, Galician, German, Greek, Hebrew, Hungarian, Icelandic, Indonesian, Interlingue, Italian, Japanese, Kazakh, Korean, Lithuanian, Malay, Norwegian Bokmål, Occitan (post 1500), Persian (Iran), Polish, Portuguese, Portuguese (Brazil), Russian, Serbian, Slovak, Spanish, Swedish, Telugu, Thai, Turkish, Ukrainian, Uyghur

@Builditluc

Breaking Changes Move Parser Configuration into a Feature Option by @Builditluc in #63 Exciting New Features Add option to change the keybindings via configuration by @Builditluc in #38 Add AUR install option by @ThomasFrans in #42 Add a desktop-entry for packaging by @ThomasFrans in #44 Add checksums for the release assets by @Builditluc in #59 Bug Fixes Fix Header Selection by @Builditluc in #41 Fix Keybinding Crash by @Builditluc in #46 Add missing element after line split by @ThomasFrans in #48 Disable stdout logging for release builds by @ThomasFrans in #47 Fix publish action in the cd workflow by @Builditluc in #60 Fix toc not having scrollbars by @Builditluc in #64 Other Changes Update Bug Report Issue Template by @Builditluc in #40 Add label requirement to ci workflow by @Builditluc in #52 Add documentation job to ci workflow by @Builditluc in #55 Fix typo in search.rs by @eltociear in #56 Add yashinghcodes/wik project to similar projects by @Builditluc in #58 Increase Stale Days to 365 by @Builditluc in #61

[0.9.1] - 2022-08-18 Added Support setting the detail level via config or args (#44) Changed Enable GitHub Sponsors for funding Apply clippy lints for tests Bump dependencies Set MSRV to 1.57.0 Fixed Apply clippy lints Update test preparation script about gpg directories Removed Remove broken link from README.md

0.1.35 (2022-04-05) * Land #42, Add ruby 3.1.1 to test matrix 0.1.36 (2022-05-03) * Land #45, Allow explicitly setting peer hostname 0.1.37 (2022-05-03) * Land #46, fixes a bug caused by a missing require statement 0.1.38 (2022-05-03) * Land #44, Ignore trailing commas in range walker 0.1.39 (2022-05-09) * Land #48, Fix typo in ssl_tcp.rb Fixes #47 0.1.40 (2022-06-13) * Fix typo in README.md 0.1.41 (2022-08-02) * Land #50, Run ubuntu 22.04 in test matrix

0.2.37 (2021-09-16) * Land #42, Update Ubuntu version & Ruby setup 0.2.38 (2022-06-29) * Land #44, Fix rex-text split string crash 0.2.39 (2022-08-08) * Land #47, Run ubuntu 22.04 in test matrix

What's New - color config option (#43) - allows use a "plain"'(white) color for weather - display of current time (#44) - visual indicator of the current time in the forecast graph

pkgsrc change: Add PKG_SKIP_REASON if ruby*-base has the same version. 0.3.2 (2022-09-28) * Make exception API compatible with what Ruby expects #42 0.3.3 (2022-10-29) * No timeout library required #44 * Make the digest library optional #45

@arthurhenrique

v1.0.1 What's Changed - Revert "feat(:nail-care:): dracula-theme" by @arthurhenrique in #51 - revert for color blind by @arthurhenrique in #52 v1.0.0 What's Changed - Add NetBSD by @0323pin in #39 - chore: add performance checker by @arthurhenrique in #42 - Refactor count_leap_years() and add test cases by @elliotwutingfeng in #40 - Refactor count_leap_years() and add test cases (#40) by @arthurhenrique in #43 - Configure Renovate by @renovate in #44 - feat: show today by @arthurhenrique in #46 - chore: update by @arthurhenrique in #47 - feat(:nail-care:): dracula-theme by @arthurhenrique in #48 - chore: release 🚀 by @arthurhenrique in #49

From the upstream ChangeLog: FIX: fix build with libressl >= 2.7.0 NEW: Added Ignore Directories Feature UPD: Generate Unicode source code based on the latest https://www.unicode.org/Public/UNIDATA/UnicodeData.txt FIX: Protect against removing AFP metadata xattr FIX: avoid setting adouble entries on symlinks FIX: add handling for cases where ad_entry() returns NULL FIX: Fix setting of LD_LIBRARY_FLAGS ($shlibpath_var). FIX: Fedora migrating away from IO::Socket::INET6 to IO::Socket::IP FIX: afpd: check return values from setXXid() functions FIX: afpd: drop groups in become_user_permanently() FIX: Fix use after free in get_tm_used() FIX: Fix sign extension problem in bsd_attr_list() FIX: Fix garbage read in bsd_attr_list FIX: make afpstats python 3 compatible UPD: docs: manual: Remove wrong TCP-over-TCP info; minor copy editing FIX: configure.ac: fix macro ordering for CentOS 6 FIX: configure.ac: fix typo Reviewed-by: Ralph Boehme [email protected] FIX: configure.ac: remove some trailing whitespace Reviewed-by: Ralph Boehme [email protected] FIX: configure.ac: fix deprecated macro invocation Reviewed-by: Ralph Boehme [email protected] FIX: configure.ac: replace obsolete macro Reviewed-by: Ralph Boehme [email protected] FIX: libatalk/dsi/Makefile.am: fix deprecation warning FIX: Store AutoMake helper script in build-aux/ FIX: configure.ac: define a dir for macros FIX: configure.ac: AM_CONFIG_HEADER is deprecated FIX: autotools: Fix another deprecation warning FIX: libgcrypt typo in configuration error message UPD: Various CI improvements FIX: libatalk/conf: re-generation of afp_voluuid.conf UPD: libatalk/conf: code cleanup and add locking to get_vol_uuid() UPD: add documentation for the lv_flags_t FIX: No need to check for attropen on Solaris #44 GC unused PLIST options.

@wishdev

1.7.0 (2022-11-17) What's Changed * Extract creation of Net::HTTP in httpproxy by @wishdev in #41 * Fix httpd error in CJK directory by @jeremyevans in #42 * Use GitHub Actions instead of Travis CI (retry) by @deivid-rodriguez in #40 * Skip env-locale-sensitive CGI test on the "java" platform by @headius in #46 * Make readpartial limit chunk to appropriate size by @wishdev in #45 * Do not use ensure in a block without begin by @jeremyevans in #49 * Allow empty POST and PUT requests without content length by @jeremyevans in #50 * Only run test_big_bodies test on Ruby 2.5+ by @jeremyevans in #51 * Fix test when run with US-ASCII encoding by @jeremyevans in #52 * Allow shutdown_pipe to be passed in via @config by @wishdev in #44 * Ensure server port numbers are numeric and ensure they are stored as ... by @wishdev in #55 * Fix shutdown_pipe test issue by @wishdev in #54 * Allow EPROTOTYPE error when writing junk to a socket by @jeremyevans in #56 * Use ruby/setup-ruby instead of actions/setup-ruby by @hsbt in #58 * Refix test_shutdown_pipe by @wishdev in #59 * add mime type of extention mjs by @paulownia in #60 * Make it more strict to interpret some headers by @mame in #61 1.8.0 (2023-01-27) What's Changed * Use frozen strings by @kirs in #65 * Use test-unit by @hsbt in #66 * More rubies on CI, deprecating ruby 2.3 due to test failure by @mathieujobin in #68 * Adds common mime types by @gotoken in #75 * add mime type for .webmanifest extension by @olleolleolle in #76 * CI: use bundler-cache: true by @olleolleolle in #79 * Typo by @printfinn in #78 * s/RubyVM::JIT/RubyVM::MJIT/g by @k0kubun in #82 * Fix invalid use of IP addresses in SNI by @jeremyevans in #83 * Bump actions/checkout from 2 to 3 by @dependabot in #91 * remove unneeded bin/console and bin/setup files from gemspec by @Benjamin-L in #94 * Accept put requests by @bharjr01 in #70 * Move the host request parsing to a separate method. by @wishdev in #85 * Only output prime information to $stderr if $VERBOSE by @jeremyevans in #88 * Better support for connection upgrade and bi-directional streaming. by @ioquatix in #101 1.8.1 (2023-01-27) What's Changed * Body should be non-frozen by default. by @ioquatix in #103 * Join test thread. by @ioquatix in #104 * Fix several regexp warnings. by @ioquatix in #105

@0323pin

What's Changed - Add NetBSD by @0323pin in #3 - Migrate from tui-rs to ratatui by @AmmarAbouZor in #4 - settings improvements by @AmmarAbouZor in #13 - [Documentation] Create README Badges by @kevinmatthes in #14 - CI Improvements by @AmmarAbouZor in #15 - Changed: Help popup improvements by @AmmarAbouZor in #17 - Added: Export current journal's content by @AmmarAbouZor in #18 - Increase Version by @AmmarAbouZor in #19 - Fixed setting backend path from CLI by @AmmarAbouZor in #22 - Added: Release CD action by @AmmarAbouZor in #24 - Fixed: Export journal extension by @AmmarAbouZor in #25 - Changed: Enhance render loop by @AmmarAbouZor in #28 - Added: CITATION.cff by @kevinmatthes in #26 - Added: Edit current journal content in external editor by @AmmarAbouZor in #29 - Added: configure CHANGELOG maintenance utilities by @kevinmatthes in #16 - Added: Tabs and scrolling to help popup by @AmmarAbouZor in #32 - Fixed: bugs in fragment creation by @kevinmatthes in #33 - Added: Multi-selection for journals by @AmmarAbouZor in #34 - Changed: bump baptiste0928/cargo-install to v2.1.0 by @kevinmatthes in #36 - [Aeruginous] Create CHANGELOG Fragment by @github-actions in #37 - Added: Export Import functions for multiple journals by @AmmarAbouZor in #39 - [Aeruginous] Create CHANGELOG Fragment by @github-actions in #40 - Fixed: Synchronizing problems with sqlite back-end by @AmmarAbouZor in #41 - [Aeruginous] Create CHANGELOG Fragment by @github-actions in #42 - Changed: improve GHA linting speed dramatically by @kevinmatthes in #43 - [Aeruginous] Create CHANGELOG Fragment by @github-actions in #44 - Addd: Option to Use Git Configured Editor as External editor by @AmmarAbouZor in #45 - [Aeruginous] Create CHANGELOG Fragment by @github-actions in #46 - [Aeruginous] Create Missing CHANGELOG Fragments by @AmmarAbouZor in #48 - Chore: Add dependabot by @AmmarAbouZor in #50 - [Aeruginous] Assemble CHANGELOG by @github-actions in #52

Upstream changes: 2.044 2022-11-16 - Added support for QR codes. - [GH-44] The X coordinate returned by $text->position() or (deprecated) $text->textpos() was incorrect when read after being set twice (report by Johan Vromans). - [GH-45] Renamed transform's "relative" option to "repeat" and fixed the documentation describing what it does (report by Johan Vromans). - [GH-49] Fix page_layout storing its value as page_mode (report by Johan Vromans). - [GH-50] Fix $pdf->viewer_preferences to return the same values it accepts for non_full_screen_page_mode (report by Johan Vromans). - Minor doc clarifications and improved error messages.

Upstream changes: 0.036 2023-05-10 17:09:48+02:00 - Add option -dumpcode to turn of dumping coderefs in YAML::PP::Schema::Perl - ci updates 0.035 2022-09-30 21:16:16+02:00 - Fix parsing alias as mapping key - Support emitting folded block scalars. Now any input should be able to output as a folded block scalar correctly. Preserving scalar styles will now also preserve those 0.034 2022-06-30 10:31:56+02:00 - Fix parsing empty folded block scalars with trailing linebreaks - Fix error handling (remaining tokens on invalid input) - Support experimental v5.36 booleans - Allow to specify multiple boolean classes (issue #37) 0.033 2022-06-27 16:31:32+02:00 - Fix add_mapping_resolver + on_create (tie existing data) 0.032 2022-03-08 19:02:00+01:00 - Add missing '~' to allowed chars in tags - Restructure directive parsing a bit - Support YAML::PP::Ref in yamlpp-* utility scripts - Add -P to yaml-load-dump --preserve - Add --dump option to yamlpp-parse-emit - yamlpp-load-dump -D JSON::PP: don't output space before colon - Add export tags to YAML::PP::Common - Update yaml-test-suite to 2022-01-17 0.031 2021-12-25 23:43:19+01:00 - Fix several rare test cases: - Support literal escaped tabs - Allow only one digit for block scalar indent indicator - Allow comments at the end of directives - Match word boundary after '%YAML' - Allow tabs and multiple spaces between directive elements - Forbid lines starting with tabs in block mode - After tabs no further indentation elements allowed 0.030 2021-11-07 21:57:28+01:00 - preserve: Keep existing data (issue #44) - Forbid directive without directive end marker - Support explicit empty key/value pairs in flow mappings - Enforce EOL after end of flow context - Forbid multiple question marks in flow mappings

@ioquatix

1.19.0 (2023-08-03) * Add adapter module for external gems. 1.20.0 (2023-08-02) What's Changed * Modernize gem. by @ioquatix in #45 * Encode serialized output to avoid encoding errors. by @ioquatix in #44 * This release drops support for Ruby 2.7.

pkgsrc changes: - Remove patch-line.c: was a backport from upstream, no longer needed - Add patch-edit.c because several <signal.h> definitions are actually accessed on non-OS2 codepaths as well (noticed on NetBSD but should be relevant for all non-OS2 platforms) Changes: Major changes between "less" versions 633 and 643 * Fix problem when a program piping into less reads from the tty, like sudo asking for password (github #368). * Fix search modifier ^E after ^W. * Fix bug using negated (^N) search (github #374). * Fix erroneous EOF when terminal window size changes (github #372). * Fix compile error with some definitions of ECHONL (github #395). * Fix regression in exit code when stdin is /dev/null and output is a file (github #373). * Add lesstest test suite to production release (github #344). * Change lesstest output to conform with automake Simple Test Format (github #399). Major changes between "less" versions 632 and 633 * Fix build on systems which have ncurses/termcap.h or ncursesw/termcap.h but not termcap.h. Major changes between "less" versions 608 and 632 * Add LESSUTFCHARDEF environment variable (github #275). * Add # command (github #330). * Add ^S search modifier (github #196). * Add --wordwrap option (github #113). * Add --no-vbell option (github #304). * Add --no-search-headers option (github #44). * Add --modelines option (github #89). * Add --intr option (github #224). * Add --proc-backspace, --proc-tab and --proc-return options (github #335). * Add --show-preproc-errors option (github #258). * Add LESS_LINES and LESS_COLUMNS environment variables (github #84). * Add LESS_DATA_DELAY environment variable (github #337). * Allow empty "lines" field in --header option. * Update Unicode tables. * Improve ability of ^X to interrupt F command (github #49). * Status column (-J) shows off-screen matches. * Parenthesized sub-patterns in searches are colored with unique colors, if supported by the regular expression library (github #196). * Don't allow opening a tty as file input unless -f is set (github #309). * Don't require newline input after +&... option (github #339). * Fix incorrect handling of some Private Use Unicode characters. * Fix ANSI color bug when overstriking with colored chars (github #276). * Fix compiler const warning (github #279). * Fix signal race in iread (github #280). * Fix reading procfs files on Linux (github #282). * Fix --ignore-case with ctrl-R (no regex) search (github #300). * Fix bug doing repeat search after setting & filter (github #299). * Fix bug doing repeat search before non-repeat search. * Fix crash with -R and certain line lengths (github #338). * Don't retain search options from a cancelled search (github #302). * Don't call realpath on fake filenames like "-" (github #289). * Implement lesstest test suite. * Convert function parameter definitions from K&R to C89 (github #316).

@bensie

3.0.0 (2023-08-25) What's Changed * Breaking: Drop support for Ruby < 2.5. * Added: Support for ECDSA (@bensie, @rchekaluk) #43, #44, #46, #49 * Added: OpenSSL 3.x support by @rchekaluk in #48 * Added: Test against Ruby 2.5, 2.6, 2.7, 3.0, 3.1, 3.2, 3.3, jruby-9.3, jruby-9.4 with GitHub Actions * Fixed: SSH public keys not validated/parsed if contain comments by @MangyCoyote in #39 New Contributors * @djberg96 made their first contribution in #40 * @MangyCoyote made their first contribution in #39 * @gogainda made their first contribution in #42 * @rchekaluk made their first contribution in #43

- Patch release to pick up the fix for #44 which was a regression introduced in 0.7.0.

4.2.2 * Adding rate limit for RST_STREAM to work around CVE-2023-44487. #94 4.2.1 * This version is identical to v4.2.0 by accident. 4.2.0 * Treating HALF_CLOSED_LOCAL correctly. #90 * Ensuring that GOAWAY is sent after DATA in the client side. #89 * Test uses a random port instead of 8080. * Breaking change: adding two optional SockAddrs to Config to be copied into Aux. * Close all streams on termination. #83 * Introducing OutBodyStreamingUnmask #80 * Introducing KilledByHttp2ThreadManager instead of ThreadKilled. #79 #81 #82 * Handle RST_STREAM with NO_ERROR. #78 * Internal changes: #74 * Breaking change: Client is generalized into (forall b. Request -> (Response -> IO b) -> IO b) -> IO a. The RankNTypes language extension is required. #72 4.1.3 * Using crypton instead of cryptonite. 4.1.2 * Removing the race of frameSender and frameReceiver in the server side. This fixes the loss of RST_Stream and TLS bad MAC error. #67 4.1.1 * Fixing memory-blow-up due to no flow control. #62 #66 4.1.0 * Implementing streaming from the client side. #41 * Making use of SettingsMaxFrameSize #44 #57 * Disabling flow control #55 * Fixing buffer overrun by trailers #52 * Proper use of settings * Breaking change: the data structure of Next was changed. The http3 package is influenced. 4.0.0 * Breaking change: HTTP2Error is redefined. * Breaking change: FrameTypeId, SettingsKeyId and ErrorCodeId are removed. Use FrameType, SettingsKey and ErrorCode instead. * A client can receive a concrete HTTP2Error. * Catching up RFC 9113. Host: and :authority cannot disagree. * Breaking change: Network.HTTP2 and Network.HTTP2.Priority are removed. * Breaking change: obsoleted stuff are removed.

@TheRustyPickle

Updates - Home page now shows a breakdown of total expense/income per transaction method Changes - Show detailed income expense info on the home page by @TheRustyPickle in #43 - Update version by @TheRustyPickle in #44

23.0.0 (2022-03-30) Changed * Update messages to v18.0.0 * [Java] Replaced Gherkin with a GherkinParser that uses a builder to construct. * [Java] Made all internal classes package private * [Java] Removed unused stopAtFirstError property from Parser * [PHP] Implemented Gherkin * [JavaScript] @cucumber/message-streams has been removed from the dependencies. If you are using @cucumber/gherkin-streams v5.0.0 or later, you have to add @cucumber/message-streams in your dependencies in addition to @cucumber/gherkin. Removed * [Java] the io.cucumber.gherkin.Main class is no longer part of the jar. 23.0.1 (2022-03-31) Fixed * [PhP] Fix dependency of messages (#1943) 24.0.0 (2022-05-31) Added * [Java], [JavaScript], [PHP], [Perl], [Python], [Go], [C], [DotNet], [Ruby] Support new messages keyword types fields an added with #1966 (#1741) Changed * [Java] the GherkinDialect constructor is no longer public (it's only used internally) * [Go] the gherkin.GherkinDialectsBuildin id renamed to gherkin.DialectsBuiltin * [Go] the gherkin.GherkinDialect id renamed to gherkin.Dialect * [Go] the gherkin.GherkinDialectProvider id renamed to gherkin.DialectProvider * The ne (Nepali) and translation changed from अनी to अनि * The uz (Uzbek) given translation changed from Агар to Belgilangan * The en-old (Old English) when translation changed from Tha / Þa / Ða to Bæþsealf / Bæþsealfa / Bæþsealfe / Ciricæw / Ciricæwe / Ciricæwa Fixed * [Java] remove shaded dependency on com.eclipsesource.minimal-json:minimal-json (#1957 #1959) 24.1.0 (2022-10-10) Added * [Java] Added support for reading directly from input (files, streams, paths, ect) * [C] The C implementation re-enabled and made up to date. (#1989) Fixed * [Javascript] Include tags from rules in scenario outlines (#2091) * [Python] Fix gherkin-python for compiling example values with trailing backslash (#2048, #1954) * [PHP] Disallow installation of Messages 18.x (#2034) 25.0.0 (2022-11-09) Added * Additional ja (Japanese) translations for and, but * Added amh (Amharic) translation * Add Фича and Шаблон примера as more convenient translations (#2078) Changed * ja (Japanese) Rule translation changed from Rule to ルール Fixed * Translations fixed for ka (Georgian) locale 25.0.1 (2022-11-09) Fixed * Fix release process for perl and elixir 25.0.2 (2022-11-09) Fixed * Fix half-glyph in Georgian translations (#44) 26.0.0 (2022-12-17) Added * [Java] Enabled reproducible builds Changed * Upgraded messages to v21 * [.NET] Update target frameworks fo .NET 6, .NET Framework 4.6.2, .NET Standard 2.0 Fixed * Link to the correct repository in various package meta-data. * [Perl] Specify version range for Cucumber::Messages dependency (#50) 26.0.1 (2022-12-17) Fixed * [Go] Fix module names 26.0.2 (2022-12-27) Fixed * [Go] Fix module names (again) 26.0.3 (2023-01-03) Fixed * [Javascript, PHP, Ruby] Allow messages v19.1.4 to v20.0.1 to be used * [Java] Improve text trim performance (#84) 26.2.0 (2023-04-07) Changed * Upgraded messages to v22 26.1.0 (2023-03-23) Added * (i18n) Add Belarusian localization 27.0.0 (2023-09-15) Added * (i18n) Added Malayalam localization * (i18n) Added 'ed' to Italian (#31) * (i18n) Added Danish translation of "Rule" * (i18n) Added Dutch translation of "Rule" * (i18n) Added Esperanto translation of "Rule" * [Ruby] Added Gherkin::Query#parent_locations for determining a scenario's parents' line numbers (#89) * C++ implementation #117 Changed * [.NET] Bump sdk to .net 8. Added .net 8 to test platforms * [Go, Perl, Ruby] Upgraded messages to v22 * [Go] Improve performance - don't compile regex on matcher create * [Perl] Fix release packaging * [Perl] Include CHANGELOG.md in tarball * [Perl] Harmonized error reporting with mainstream implementations - errors are now converted to messages and reported in the message stream (#31) * [Ruby] Update minimum ruby requirement from 2.3 to 2.5

3.5.0: - Added the - force option - Allows a user to force the generation of digests for strings down to 50 characters long 3.5.1: - Fixed the error in the Python extension 3.5.2: - Added the BlackHat Asia tool (presented at Arsenal) 3.7.0: - merged in various fixes - ifdef for SPARC and RH73 - corrected TLSH_CTC_final.pdf - added a SHA1 to the NOTICE.txt file - improved the make.sh so that it calls the test.sh (and does regression tests) - improved regression tests to confirm that the hash is calculated correctly in your environment - fixed the header file C++ standard violation (reserved identifier violation #21) 3.7.1: - resolved issue #29 - the force option for Python Step 1 - adding a regression test for strings approx of length 50 Step 2 - add python code 3.7.2: - added code to set the distance parameters for ROC analysis 3.7.3: - resolving issue #44 - making static library the default 3.7.4: - resolving issue #45 - add a timing test for TLSH 3.7.5: - resolving issue #46 - in include/tlsh_impl.h #define SLIDING_WND_SIZE 5 this can be varied between 4 to 8 3.8.0: - Adding // access functions - required by tools using TLSH library - int Lvalue(); - int Q1ratio(); - int Q2ratio(); 3.9.0: - resolving issue #48 - tlsh_pattern program 3.9.1: - resolving issue #38 - putting in fix in rand_tags.cpp so that it generates identical output to previous version while safely working with pointers 3.9.2: - Also merged the contents of NOTICE.txt into LICENSE. This was done because NOTICE.txt is sometimes accidently removed when people clone this repository. And the LICENSE specifically states that NOTICE.txt should NOT be removed. - Also added command line option -notice which displays the NOTICE.txt file 3.9.3: - currently tlsh_pattern returns all the matches modify tlsh_pattern to return the best match - remove the newline from the input fields when reading in the tlsh_pattern file 3.9.4: - check in order_bug program which demonstrates issue #50 - resolved issue #50 - added code to tlsh_impl.cpp to check for invalid call sequences to update() and final() 3.9.5: - issue #61: added a command line option -notest - do not do any testing 3.9.6: - Have a cmake option to build tlsh with a zero byte checksum (development / research option) - Default build has 1 byte checksum - which is strongly recommended 3.9.7: - resolving issue #50 for bin/timing_unittest 3.9.8: - timing_unittest measures the time taken to do distance calculations - add a command line option -size - so that you can measure the time taken to evaluate different sizes of string 3.9.9: - resolve issue #62 - remove dependancy on GNUInstallDirs 3.10.0: - Adding // access function - required by tools using TLSH library - int BucketValue(int bucket); - int Checksum(int k); 3.11.0: - Make calculation of TLSH digests approx 7 times faster (for large files), done by - inline functions - unrolling loops - fixing the -O2 optimization option 3.11.1: - tidy up: 1. use fast_b_mapping() instead of b_mapping() 2. remove declaration of unsigned r which is never used 3. remove #include which is not required 3.12.0: - remove floating point calculations such as log() function use alookup table instead 3.13.0: - .vcproj files and instructions for builing TLSH on Windows using Visual Studio 3.13.1: - fixing setup.py so that you can install Python Extension on Windows 3.14.0: - adding sliding window size to tlsh_version - changing test.sh to read the sliding window size 3.14.1: - fixing error in test script for -xlen option (print statements about considering length were incorrect) - improved test.sh - tests for existance of expected output files 3.15.0: - Refactor code - so that input of directory or digest is in a struct. The code to process input is in library code (input_desc.cpp, shared_file_functions.cpp). The input routines can be used by myultiple programs. Also, preparing for things like csv input files. 3.15.1: - added command line option -help to show full help information 3.15.2: - tlsh_pattern uses refactored code introduced in 3.15.0 3.16.0: - improved tlsh_pattern functionality - added regression tests for tlsh_pattern 3.16.1: - improved tlsh functionality - add options 3.16.2: - added regression tests for 3.16.1 3.17.0: - Make command line option -force (50 char limit) the default behaviour - Add a command line option -conservative (256 char limit) 3.17.3: - add checking to confirm that TLSH digests are the correct length in - -c option - -d option - the appropriate column of -l listfile options 3.18.0: - resolve issue #72 - remove tlsh_version 3.19.0: - preperation for Windows build remove ../Testing/ from test.sh script and from regression test results 3.19.1: - in test.sh and testlen.sh - make TLSH_PROG a variable 4.0.0: - version 4: adding version identifier to each digest: 'T1' - adding command line option -old to generate old style digests - In this version - the showvers is defaulted to off - so this will pass the old regression tests 4.0.1: - turing on T1 functionality by setting showvers=1 in main - updating regression tests to have T1 at the start of digests 4.1.0: - adding -o option for output filename (output will go to stdout if no output file given) - changed test scripts to use -o option - adding -ojson option for json output - added regression test for -ojson option - adding -onull option to output empty files / files too small as TNULL 4.2.0: - Windows version using minGW 4.2.1: - resolve issue #78 json objects do not validate on windows 4.2.2: - resolve issue #81 - Pass regression tests 4.2.3: - add regression tests that are compatible with https://github.com/glaslos/tlsh 4.3.0: - issue #79 - divide by 0 if q3 == 0 solution. if (q3 == 0) return invalid hash 4.4.0: - Fixing Python Extension - updated python extension to T1 hashes (4.0.0) - fixed python_test.sh (which attempted to access old expected results files) - added license information to py_ext/tlshmodule.cpp 4.4.1: - Command line options to tlsh_digest.py -conservative enforce 256 byte limit -old generate old style hash (without "T1") - added python functions to tlsh package (for backwards compatibility) tlsh.oldhash(data) tlsh.conservativehash(data) tlsh.oldconservativehash(data) 4.5.0: - Checking in files to create pypi package 4.6.0: - Add architecture ppc64le to travis build (Thanks ddeka2910) 4.7.0: - Release updated package py-tlsh on Pypi.org - Merging in pull request that adds functions to Python package lvalue, q1ratio, q2ratio, checksum, bucket_value and is_valid - resolve issue #102 - correct Python version numbers 4.7.2: - regression tests for C++ and Python functions for: lvalue, q1ratio, q2ratio, checksum, bucket_value - resolve issue #95 - allow Requires-Python: >=2.7 4.8.0: - Fix the make install target by adding the version.h in the installed files 4.8.1: - Improve portability, add shared library build, install tlsh_unittest 4.8.2: - fixed tlsh_win_version.h

Based on PR 58426 by jonathan buschmann. ## 2.4.7 2024-05-05 ### Fixed - docs(pop): clarify --spill behavior (#445) - fix(branch): disallow branch before subcommand (#447) ### Changed - refactor: get gix-command via gix with command feature - Update gix to version 0.62 ## 2.4.6 2024-04-07 ### Fixed - fix(bash): fix completion for "committish" ### Changed - docs: Update copyright year - chore: update gix to 0.61.1 - ci: update to wix 4.0.5 ## 2.4.5 2024-02-18 ### Fixed - fix: stdout from hooks (#418) ### Changed - chore: add category and keywords to Cargo.toml - build: exclude some paths from crate - docs(readme): enumerate more package repositories - chore: update dependencies ## 2.4.4 2024-02-11 ### Fixed - fix: pass stdio for interactive editing (#415) - fix: update gix-tempfile and gix-lock to 13.1.0 (#413) ### Changed - chore: update dependencies ## 2.4.3 2024-02-04 ### Added - feat(branch): allow delete of current branch ### Fixed - fix(branch): delete branch config with branch - fix: use gix-command for interactive edit (#407) - fix: improved interactive editor diagnostics - chore: update gix to 0.58.0 (#407) - docs: fix dates in changelog ### Changed - refactor(branch): use gix to rename config section - refactor: use gix to remove stgit branch config - refactor: use gix-command for hooks - refactor: use non-deprecated indexmap methods - ci: update cargo-generate-rpm to 0.14.0 - ci: update to upload-artifact@v4 - ci: restore use of IO::Pty in MacOS build ## 2.4.2 2023-12-26 ### Changed - feat(pop): allow unescaped negative patch offsets - feat(show): allow unescaped negative patch offsets - chore: update dependencies ## 2.4.1 2023-12-10 ### Fixed - fix(zsh): short -r opt for `stg series` ### Changed - chore: update gix to 0.56.0 - chore: update transient dependencies ## 2.4.0 2023-10-08 ### Added - feat(delete): --all -A -U -H options - feat(sink): -T/--above option - feat(branch): short opts for clone and delete ## 2.3.3 2023-10-04 ### Fixed - fix(zsh): -S option for float, import, and sync - build: avoid non-portable install options - test: improved test script portability ### Changed - update dependencies ## [2.3.2] 2023-08-19 ### Fixed - fix!(uncommit): check for HEAD/top mismatch (#360) - docs: docstring spelling and formatting fixes ### Changed - feat(uncommit): print uncommited patches - pin serde to avoid using precompiled binary - update dependencies ## [2.3.1] 2023-07-25 ### Fixed - fix(zsh): typo in completion help for stg commit --all - fix: use canonical Message-ID spelling - fix(stgit.el): recognize new empty patch marker - fix(import): Keep first line break in body ### Changed - update dependencies ## [2.3.0] 2023-05-25 ### Removed - import-compressed is always enabled, no longer a feature ### Added - unofficial deb and rpm packages - msi package for Windows ### Fixed - fix(import): would panic without import-url feature - fix(import): patch numbers not stripped from name ### Changed - use bzip2-rs instead of bzip2 crate - update dependencies ## [2.2.4] 2023-05-15 ### Added - feat: Upgrade from ancient stack state formats (#235) ### Fixed - fix(branch): create based on remote branch (#317) - fix(import): lost subject lines resembling header (#321) - fix(import): subject line may be discarded ### Changed - chore: update dependencies ## [2.2.3] 2023-04-26 ### Fixed - fix: error using on Windows (#273) - fix: path handling for Windows compatibility - fix: commit-msg hook run from work root - fix: avoid "stg.exe" in usage on Windows - fix: use gitattributes to force LF endings on Windows - fix: wrap hooks with sh on Windows ### Changed - chore: update to gix 0.44.0 - chore: update other dependencies ## [2.2.2] 2023-04-01 ### Fixed - fix: rebase with '@' in ref names (#306) - fix: improved error messages for unrecognized commands ## [2.2.1] 2023-03-29 ### Changed - chore: update to clap 4.2.0 - chore: update to gix 0.43.0 - chore: pin clap minor version ### Fixed - fix(branch): allow reuse of partially deleted branch names (#290) - fix(branch): branch list alignment - fix: running hooks from worktree subdir (#295) - fix: running from linked worktree (#297) - fix(float): correct -S in usage string - fix: correctly show bold command/subcommand in overidden usage ## [2.2.0] 2023-02-24 ### Removed - feat!: remove short -s option for --submodules - fix!: patch name cannot be {base} or @ ### Added - feat: patch locator syntax - feat: locate branches using @{-N} syntax - feat(series): Add --reverse option - feat(series): options for patch offsets and indices - feat(series): --no-xxx options to override display options - feat(series): optional value for --short - feat!: short -s option for --signoff (#245) - feat(init): add -b/--branch option ### Changed - fix!: use -S as short opt for --series - feat!: constrain refresh -p to visible patches - feat(series)!: empty patch prefix changed to * - feat!: spell errors in lowercase - refactor: use gitoxide instead of git2 - refactor: use time crate instead of chrono - feat!: update to clap 4.1 - chore: update to latest dependencies ### Fixed - fix: Error if author or committer is not configured - fix: Use correct base directory for core.hooksPaths - fix(rename): colliding patch names - fix(rebase): repair rebasing to a tag (#265) - fix(branch): switch branch with detached head - docs: Repair docstrings being confused as html - docs: normalized spelling for --branch value ## [2.1.0] 2022-12-12 ### Added - feat: Configurable push conflict policy (#60) - feat: Add --committer-date-is-author-date option (#47) - feat(import): Add --3way option (#36) - feat(import): Add --directory option (#36) ### Changed - feat!: Relaxed stack initialization (#238) - feat!: Only sign stack based on stgit.gpgsign (#238) - fix!: Allow "---" separator in messages (#243) - feat: More descriptive push conflict message (#60) - feat: Avoid post-edit commits when no change - chore: Update dependencies to latest versions ### Fixed - fix: Improved error message for uninitialized stack - fix: Improve error for re-initialization attempt - fix(prev): Different error message for empty stack - fix: Accept full ref name for branches - fix(zsh): Complete --edit and --diff for stg new ## [2.0.4] 2022-11-30 ### Changed - docs: Document configuration variables - refactor: Use is-terminal instead of atty - chore: Update Cargo.lock with latest dependencies. ### Fixed - fix: Don't generate new patch name until after edit (#239) - fix: Run shell aliases from top-level of work tree - fix: Use GIT_PREFIX in built-in aliases ## [2.0.3] 2022-11-21 ### Changed - chore: Update Cargo.lock with latest dependencies. ### Fixed - fix: improved git version parsing on MacOS - fix: StGit-specific branch config handling - docs: fixed many typos ## [2.0.2] 2022-11-17 ### Changed - chore: Update Cargo.lock with latest dependencies. - docs(init): Add long help for `stg init`. ### Added - feat: Enable basic support for `extensions.worktreeconfig` to unblock sparse checkout with partial clone (#195). ### Fixed - docs: More inter-command links - docs: Normalize quoting ## [2.0.1] 2022-11-07 ### Changed - chore: Update to clap 4.0.22 ### Fixed - docs(readme): Clarify static versus dynamic linking (#230) - build: Improve Documentation build performance (#229) ## [2.0.0] 2022-11-06 ### Removed - `stg clone` is removed. Use `git clone` and `stg init` instead. - `stg mail` is replaced with `stg email format` and `stg email send`. - `stg refresh --spill` is replaced with dedicated `stg spill` command. - `stg edit` no longer accepts `-O/--diff-opts`. Custom diff options is in conflict with editable diffs since many (most?) diff options cause the diff to no long be applicable. - `stg files` no longer accepts `-O/--diff-opts`. This option was of marginal value since it only had a possible side effect when `--stat` was being used. ### Added - `stg id` now accepts the `-b/--branch` option. - `stg completion` command provides runtime support for shell completions. - `stg completion bash` generates bash shell completion script. - `stg completion fish` generates fish shell completion script. - `stg completion zsh` outputs zsh shell completion script. - `stg completion list` shows StGit commands and aliases and is used at completion-time by shell completion scripts. - `stg completion man` generates man pages in asciidoc format. - `stg email format` wraps `git format-patch` and provides a mechanism to generate patch emails and optional cover letter in mbox format. - `stg email send` wraps `git send-email` and allows sending patch emails, either from files generated by `stg email format` or by specifying patches directly. - `stg new --refresh` allows a new patch to be refreshed with changes in one step. The `-i/--index`, `-F/--force`, `-s/--submodules`, and `--no-submodules` options from `stg refresh` are also available to `stg new` when using `-r/--refresh`. - `stg series` gains the `-i/--commit-id` option to display patches' commit ids. - `stg show` diff output can now be limited to certain paths by specifying path limits on the command line. - `stg spill` replaces `stg refresh --spill`. - `stg version` gains `-s/--short` flag to show shortened version info. - Added documentation for patch range syntax to stg(1) man page. - Added `install-all` target to top-level Makefile that installs the executable, man pages, html pages, and shell completions. ### Changed - StGit is now implemented entirely in Rust instead of Python. - StGit is generally much faster; many commands are up to 4x faster. There was an emphasis on making informational commands such as `stg id`, `stg series`, and `stg top` as fast as possible to make their use in interactive contexts (shell prompts, IDE extensions) more comfortable. - StGit error messages have been updated; many have different, and hopefully better, wording. Error messages are also use color (when color is enabled). Scripts relying on exact error messages from StGit will need to be updated. - StGit output to stdout is generally more terse. Commands that change the stack such as `push`, `pop`, and `commit`, use sigils to denote the changes made to the stack. E.g. `stg commit p0..p3` will output `$ p0..p3` where the "$" sigil means that a patch, or patch range, has been committed. These are all the currently used stack change sigils: - `+` patch was pushed - `-` patch was popped - `>` patch became the current topmost patch - `&` patch was updated - `$` patch was committed - `#` patch was deleted - `@` patch was rolled-back - `!` patch was hidden - StGit aliases are now more like Git aliases. Normal aliases refer to StGit subcommands, but aliases prefixed with '!' are shell aliases that may run arbitrary commands. An example normal alias would be `git config stgit.alias.list 'series --description --empty'`. An example shell alias would be `git config stgit.alias.st '!git status --short'`. - Commands such as `stg goto`, `stg push`, and `stg pop` now require full/correct patch names on the command line and no longer accept unambiguous patch name prefixes. When an inexact patch name is provided on the command line, the error message will now suggest similar valid patch names. - Additional template search paths were added. In addition to looking for template files in .git/, also look in `$XDG_CONFIG_HOME/stgit/templates/` and `$HOME/.stgit/templates`. This search strategy is consistent with how git looks for the global config file. - The new `--signoff` patch edit option supersedes the deprecated `--sign` and `--sign-by` options. `--signoff` without its optional value does the same thing as `--sign`, while `--signoff=<value>` does the same thing as `--sign-by=<value>`. - The `--ack` and `--review` patch edit options now optionally take a value. The `--ack-by` and `--review-by` options are deprecated. - `stg branch` output is now generally less verbose. - `stg branch --describe` replaces `stg branch --description`. The `--description` subcommand remains supported as a hidden alias to `--describe`, but the description string must now be provided as its own argument; i.e. `--description="description string"` is no longer supported. - `stg branch --list` now produces colorized output. The `--color` option or `NO_COLOR` environment variable may be used to affect this behavior. - `stg branch --rename` now supports renaming regular git branches in addition to StGit-enabled branches. - `stg clean` now uses `-A` and `-U` short options for `--applied` and `--unapplied` instead of `-a` and `-u`. This is done for consistency with `stg series` and `stg show`. - `stg import` now only recognizes compressed patches by their file extension (`.bz2` or `.gz`) and no longer proactively attempts to decompress using all known decompressors. - `stg import` support for compressed input files is selectable at compile time using the `import-compressed` feature. - `stg import` support for importing from a URL is selectable at compile time using the `import-url` feature. **N.B.** there is a measurable runtime performance impact of building with `import-url` due to the unconditional, pre-main initialization of `curl` which affects **all** `stg` commands. - `stg log` now colorizes output by default. The `--color` option or `NO_COLOR` environment variable may be used to affect this behavior. - `stgit.new.verbose` changed to `stgit.edit.verbose` and now also affects edit behavior for `edit`, `refresh`, and `squash` along with `new`. - `stg new` now accepts `-e/--edit` and `-d/--diff` instead of `-v/--verbose` - `stg pick` now allows a mix of commits and patches to be picked whereas previously only a single commit xor multiple patches could be picked. - `stg pick` now performs a single stack transaction for all the picked patches/commits instead of one transaction per pick. - `stg push` now attempts to perform three-way merges, which may improve conflict resolution in some cases. This feature is enabled by default when git >= 2.32.0 is detected. - `stg rebase --interactive` the "squash" and "fixup" instructions may no longer be applied to the first patch in the instruction list. The stated semantics of both "squash" and "fixup" is that they squash the labeled patch with the preceding patch, which is not possible/valid when there is no preceding patch. - `stg refresh` no longer has a `--spill` flag. Use `stg spill` instead. - `stg series` has updated colorized output. - `stg series` now requires patch range arguments to be both in-order and contiguous. Constraining patch ranges in this manner ensures that the output from `stg series` is always a valid/correct view of a subset of the series. - `stg show` diff output respects the `--color` option. - `stg squash` now allows the full suite of patch edit options, including `-d/--diff`. Previously only a few message-related options were available. - `stg version` now displays copyright and license statements. ### Fixed - `stg branch --create` inherits the current branch's remote branch configuration, if available. The Python implementation had an apparent bug that prevented inheriting the remote branch configuration when creating from the current branch. - Avoid case insensitive patch name collisions. On operating systems with case-insensitive paths, patch names that only differ by case lead to patch reference collisions. StGit now ensures that patch names are distinct under case insensitive comparisons. - `stg pull` and `stg rebase` record updated stack state instead of deferring until the next stack-modifying command to do so. ### Changed since 2.0.0-rc.2 #### Changed - chore: Update Cargo.lock #### Fixed - fix(zsh): Repair broken completion of --git-opt - fix(zsh): Add missing `stg email send --branch` - fix(email): Send using --branch option - fix: Avoid duplicate signoff with stgit.autosign - fix: Do not use 3way for merged checks ## [2.0.0-rc.2] 2022-10-23 ### Changed - The `--diff-opts` option is renamed to `--diff-opt`. `--diff-opts` remains available as an alias. - The `--diff-opt` option no longer allows multiple git options per occurrence. This allows git diff options with spaces in their values. - The `--git-opts` option for `stg email format` and `stg email send` is renamed `--git-opt`. - The `--git-opt` option no longer allows multiple git options per occurrence. This allows git options with spaces in their values. - Zsh completion for `--diff-opt` and `--git-opt` leverage the full-featured git completion capability. ### Fixed - Repair check for modifications to stack by external tools. - `stg pull` and `stg rebase` record updated stack state instead of deferring until the next stack-modifying command to do so. - Improve patch application with `git apply --3way` when pushing` (#225) - Zsh completion for `--diff-opt` accommodates multiple occurrences ## [2.0.0-rc.1] 2022-09-30 ### Added - Added `--annotate` flag to `stg email send`. - Added `-p`/`--patch` option to `stg show` as alternative way to select patch ranges (#216). - Added `-n`/`--name` option to `stg new` as alternative way to specify new patch name (#216). ### Changed - Update `git2` to 0.15.0, which may further help compatibility with sparse checkouts and multiple worktrees (#195). - Update to `clap` 4.0, which changes the help formatting and coloring. - Update other dependencies to latest versions in Cargo.lock. - No longer depend on `lazy_static` crate. - Use `std::thread::scope` instead of custom mechanism. This brings the total number of uses of `unsafe` in StGit to zero. - Minimum rustc requirement is set to 1.63.0. - The '$' sigil used for committed patches is now yellow instead of white. - Patch names beginning with a hyphen '-' may be disambiguated from command line options by escaping the leading '-' with a backslash. - `stg email format` and `stg email send` now use `-G`/`--git-opts` to pass additional options to `git format-patch` and `git send-email`. - Patch name arguments to `stg email format` and `stg email-send` can now be placed after a `--` separator (#216). - Update top-level usage help for `stg`. ### Fixed - Various errors that may occur when executing a stack transaction are now handled more robustly such that the changes from the transaction are rolled-back so that the stack, repository, and worktree are all in a consistent state (#205). - The `stg uncommit -h` usage indentation is repaired. - The `stg float` usage now shows the two distinct usage modes. - `stg squash --name` allows patch names with leading '-'. - `stg diff --range` allows patch names and ranges with leading '-'. - Fix some pre-indented paragraphs in help/about strings. - Zsh completion for `stg edit` incorrectly included -O/--diff-opts. - Zsh completion for `stg files` incorrectly included -O/--diff-opts. ## [2.0.0-beta.3] 2022-08-28 ### Added - Add install targets for `contrib/` directory. ### Changed - Use `git` executable instead of `libgit2` for all status and index operations to improve compatibility with sparse index checkouts (#195). - Show commit hash in `stg version` output when not built from tag. - Use `cargo --locked` consistently in Makefiles. - Use "patch" extension in temp file name when editing a patch with a diff. - Updated transient dependencies in Cargo.lock. ### Fixed - Repair `stg branch --describe` panic when run without arguments - Repair zsh completions for `git branch` - Repair `stgit.el` to use compatible `stg show` commands (#202). - Repair `stg uncommit --to` to work with annotated tags (#203). - Repair `make install` to not install cargo tracking files. ## [2.0.0-beta.2] 2022-08-05 ### Changed - Improved error when push conflicts with untracked files (#193) - Removed a few transitive dependencies by turning-off features in bstr and chrono. - Update Cargo.lock with latest dependencies - Update to clap 3.2 and only use non-deprecated interfaces ### Fixed - Repair `stg spill` when spilling newly added files and using path limits. ## [2.0.0-beta.1] 2022-07-28 ### Removed - Removed Python implementation of StGit. ### Added - Man page generation in asciidoc format with `stg completion man`. This was needed for feature parity with the Python implementation. - Added documentation for patch range syntax to stg(1) man page. - Added `install-all` target to top-level Makefile that installs the executable, man pages, html pages, and shell completions. ### Changed - Additional template search paths were added. In addition to looking for template files in .git/, also look in `$XDG_CONFIG_HOME/stgit/templates/` and `$HOME/.stgit/templates`. This search strategy is consistent with how git looks for the global config file. - Makefile targets are updated such that they are all applicable to the Rust implementation. - Argument value names are now all lowercase in help and man pages. - Updated Cargo.lock with latest versions of dependencies. - Release checklist is updated for Rust implementation. ### Fixed - Minor typo fixes in help strings - Improved documentation for top-level `stg` options. - Improve error message in edge case of attempting to push a hidden patch by name when there are no unapplied patches. ## [2.0.0-alpha.2] 2022-07-07 ### Added - `stg email format` wraps `git format-patch` and provides a mechanism to generate patch emails and optional cover letter in mbox format. - `stg email send` wraps `git send-email` and allows sending patch emails, either from files generated by `stg email format` or by specifying patches directly. ### Changed - Bash completions for shell aliases now fallback to filename completions (#191). - Help options listings now ensure --color and --help are shown last. - Various zsh completion improvements: - Add descriptions for --color values - Complete -O/--diff-opts values (using `git diff-tree --git-completion-helper`) - Comprehend `stg -C <dir>` options - Improved/corrected alias expansion - Improved error messages when completion is attempted outside git repo and/or StGit-initialized branch - Patch name completions now look and feel like output from `stg series` - Complete patch range syntax ('patch0..patchN') for all relevant commands - Completion for `stg squash` no longer allows duplicate patch name arguments - Removed completions for removed `stg mail` command - Completion for `stg sink` no longer offers hidden patches - Completion for `stg rename` comprehends second, new patch name argument - Completion for `stg diff --range` now works ### Fixed - Compatibility with git versions prior to 2.35.0 is repaired by avoiding using `git apply --allow-empty` (#192). - Fish completions for -O/--diff-opts are repaired ## [2.0.0-alpha.1] 2022-06-17 ### Added - `stg series` gains the `-i/--commit-id` option to display patches' commit ids. - `stg series` colorized output is modified. The main change is that patch descriptions are no longer yellow. - `stg version` now displays copyright and license statements. - `stg version` gains `-s/--short` flag to show shortened version info. - The `stgit.diff-opts` configuration variable is now respected as it was in the Python implementation. - `stg completion` command provides runtime support for shell completions. - `stg completion bash` generates bash shell completion script. - `stg completion fish` generates fish shell completion script. - `stg completion zsh` outputs zsh shell completion script. - `stg completion list` shows StGit commands and aliases and is used at completion-time by shell completion scripts. ### Changed - The `-O/--diff-opts` flag now allows both multiple space separated opts in one value as well as multiple occurrences of `-O/--diff-opts` on the same command line. This behavior is compatible with the Python implementation. - `stg series` help output splits options into a few sections. - Dependencies are updated to more recent versions in Cargo.lock. ### Fixed - `stg edit --set-tree` no longer causes the interactive editor to be implicitly invoked. - Repair build for non-Linux unix targets (including MacOS) and Windows targets. - Avoid case insensitive patch name collisions. On operating systems with case-insensitive paths, patch names that only differ by case lead to patch reference collisions. StGit now ensures that patch names are distinct under case insensitive comparisons. - Add missing `-t` short option for `--set-tree` for `stg edit`. - Add missing `-k` short option for `--keep`. ## [2.0.0-alpha.0] 2022-05-17 ### Removed - `stg edit` no longer accepts `-O/--diff-opts`. Custom diff options is in conflict with editable diffs since many (most?) diff options cause the diff to no long be applicable. - `stg files` no longer accepts `-O/--diff-opts`. This option was of marginal value since it only had a possible side effect when `--stat` was being used. - `stg clone` is removed (at least for the time being). Use `git clone` and `stg init` instead. - `stg mail` is removed, but will be re-added or replaced prior to the 2.0.0 release. ### Added - `stg new --refresh` allows a new patch to be refreshed with changes in one step. The `-i/--index`, `-F/--force`, `-s/--submodules`, and `--no-submodules` options from `stg refresh` are also available to `stg new`. - `stg id` now accepts the `-b/--branch` option. - `stg spill` replaces `stg refresh --spill`. ### Changed - StGit aliases are now more like Git aliases. Normal aliases refer to StGit subcommands, but aliases prefixed with '!' are shell aliases that may run arbitrary commands. An example normal alias would be `git config stgit.alias.list 'series --description --empty'`. An example shell alias would be `git config stgit.alias.st '!git status --short'`. - The `--ack` and `--review` options now optionally take a value. The `--ack-by` and `--review-by` options are deprecated. - Commands such as `stg goto`, `stg push`, and `stg pop` now require full/correct patch names on the command line and no longer accept unambiguous patch name prefixes. When an inexact patch name is provided on the command line, the error message will now indicate similar valid patch names. - `stg branch` output is now generally less verbose. - `stg branch --describe` replaces `stg branch --description`. The `--description` subcommand remains supported as a hidden alias to `--describe`, but the description string must now be provided as its own argument; i.e. `--description="description string"` is no longer supported. - `stg branch --list` now produces colorized output. The `--color` option or `NO_COLOR` environment variable may be used to affect this behavior. - `stg branch --rename` now supports renaming regular git branches in addition to StGit-enabled branches. - `stg clean` now uses `-A` and `-U` short options for `--applied` and `--unapplied` instead of `-a` and `-u`. This is done for consistency with `stg series` and `stg show`. - `stg import` now only recognizes compressed patches by their file extension (`.bz2` or `.gz`) and no longer attempts to decompress using all known decompressors. - `stg import` support for compressed input files is selectable at compile time using the `import-compressed` feature. - `stg import` support for importing from a URL is selectable at compile time using the `import-url` feature. - `stg log` now colorizes output by default. The `--color` option or `NO_COLOR` environment variable may be used to affect this behavior. - `stgit.new.verbose` changed to `stgit.edit.verbose` and now affects edit behavior for `edit`, `refresh`, and `squash` along with `new`. - `stg new` now accepts `-e/--edit` and `-d/--diff` instead of `-v/--verbose` - `stg pick` now allows a mix of commits and patches to be picked whereas previously only a single commit xor multiple patches could be picked. - `stg pick` now performs a single stack transaction for all the picked patches/commits instead of one transaction per pick. - `stg rebase --interactive` the "squash" and "fixup" instructions may no longer be applied to the first patch in the instruction list. The stated semantics of both "squash" and "fixup" is that they squash the labeled patch with the preceding patch, which is not possible/valid when there is no preceding patch. - `stg refresh` no longer has the `--spill` flag. Use `stg spill` instead. - Updated colorized output for `stg series`. - `stg series` now requires patch range arguments to be both in-order and contiguous. Constraining patch ranges in this manner ensures that the output from `stg series` is always a valid/correct view of a subset of the series. - `stg show` diff can now be limited to certain paths by specifying path limits on the command line. - `stg show` diff output respects the `--color` option. - The new `--signoff` patch edit option supersedes the deprecated `--sign` and `--sign-by` options. `--signoff` without its optional value does the same thing as `--sign`, while `--signoff=<value>` does the same thing as `--sign-by=<value>`. - `stg squash` now allows the full suite of patch edit options, including `-d/--diff`. Previously only a few message-related options were available. ### Fixed - `stg branch --create` inherits the current branch's remote branch configuration, if available. The Python implementation had an apparent bug that prevented inheriting the remote branch configuration when creating from the current branch. ## [1.5] 2022-01-28 ### Removed ### Added - Add Makefile targets for installing shell completions - `stg rebase --interactive` learns 'hide' instruction ### Changed - Picked patch names are preserved when possible (#175) - Replace `--unapplied` option with `--noapply` for `stg pick` (#174) - `stg pick --noapply` no longer reverses patch order (#174) - Use `stg version` uses `sys.executable` to get Python version. ### Fixed - Repair `stg repair` with amended first patch (#163) - Repair corner cases where invalid patchnames could be generated by `stg new`, `stg uncommit`, etc. (#176) - `stg mail` could crash due to a misspelled reference (#178) - Zsh completion for `stg refresh -p` now completes against all patches (not just applied patches). - Zsh gains missing completion for `stg push --noapply` - Minor repair to help for `stg float --noapply` and `stg push --noapply` - Restore `stg sink --nopush` capability. ## [1.4] 2021-10-27 ### Removed - Python 3.5, which became EOL 2020-09-13, support is deprecated and will be removed in a future StGit release - Python 3.6, which will be EOL 2021-12-23, support is deprecated and will be removed in a future StGit release ### Added - The new `stg import --message-id` option causes the Message-ID from imported emails to be included as the Message-Id trailer in the patch description (#42) - The new 'stgit.import.message-id' config option also enables the Message-Id trailer (#42) ### Changed - `stg import` no longer creates "Message-Id" trailer by default when importing patches from email (#42) - StGit works with Python 3.10 - `stg version` prints a more abbreviated Python version - `stg commit` will no longer commit empty patches by default; the `--allow-empty` option may be used to override this behavior (#158) - The `stgit.main.main()` function now takes an argv parameter and returns an int return code in most cases instead of calling sys.exit(), thus making main() a bit easier to use as an API. ### Fixed - Repair stack upgrade with `stg branch --list` (#155) - Repair crash in `stg squash` with out of order patches and no name specified (#157) - Zsh completions learn `stg float --noapply` option - Zsh completion for `stg sink` now allows multiple patches ## [1.3] 2021-09-26 ### Removed ### Added ### Changed ### Fixed - Repair crash regression when using `stgit.autosign` ## [1.2] 2021-09-26 ### Removed ### Deprecated - Python 3.5, which became EOL 2020-09-13, support is deprecated and will be removed in a future StGit release - Python 3.6, which will be EOL 2021-12-23, support is deprecated and will be removed in a future StGit release ### Added - `stg rebase ` learns `--interactive`; easily re-order, edit, squash, fixup, or delete patches via your editor - `stg rebase` learns `--autostash`; stash changes before the rebase and apply them after. Also configurable with the `stgit.autostash` configuration option - `stg edit` can now rename patches (#119) - `stg edit` gains helpful instructions (#138) - `stg new` learns `--verbose`, which includes a diff in the editor window (similar to `git commit --verbose`). This behavior is also configurable with the `stgit.new.verbose` configuration option - `stg push` and `stg float` learn `--noapply` option; allows patches to be reordered without updating worktree and deferring merge conflict resolution (#144) - `stg edit`, `stg refresh`, and `stg new` learn the `--sign-by`, `--ack-by`, and `--review-by` options which allow those respective trailers' values to be specified by the user on the command line (#92) ### Changed - Stack metadata version 5; stack metadata is moved from `refs/heads/<branch>.stgit` to `refs/stacks/<branch>` and the stack metadata file now uses a JSON format instead of the prior custom format; the stack metadata will be upgraded to v5 on first use of this version of StGit; like all stack metadata upgrades, **this is a one-way auto-upgrade for existing stacks** (#65) - Use setuptools instead of distutils for packaging - No git or python version checks in setup.py - Use different dynamic versioning system - Install `stg` executable as console_script entry point - More sophisticated search for bash.exe on Windows when running hooks - The editor window text for `stg squash` has been modified to mirror git's behavior -- the squash edit message now includes all commits (#71) - Binary diffs are no longer shown when with `stg edit -d` - Multiple trailers can now be added at once; this is now allowed, for example: `stg edit --sign --review --ack` - Update zsh completion for `stg rebase` to show local and remote heads (#102) - Zsh completions for commands with patch arguments now comprehend the effect of `-b/--branch` and `-B/--ref-branch` - Zsh completions now guard patch names--one less TAB press to complete patch names in certain contexts - `stg import` now extracts the `Message-ID` email header into the patch message (#42) ### Fixed - Repair crash when attempting to export empty patch (#112) - Exact command name matches are unambiguous (#110) - Exiting with an empty `stg edit` editor will now abort the edit; previously it would delete your commit message. (#138) - Repair completions when stg.series.description is enabled in config - Workaround child process reaping race on Windows (#78) - Repair crash with `stg float --series` when bad patch name in series - Repair zsh completion for `stg float` to accept multiple patch names - Repair zsh completion for changed files, affecting `stg refresh` and `stg diff` ### Internal - Add link to coverage.io project to CONTRIBUTING.md - Set smart `exclude_lines` default for 'coverage' - Expanded test suite for `stg edit` - Add pkgtest.py script to help test StGit packaging - Cleanup .gitignore files ## [1.1] 2021-04-30 ### Removed ### Added - StGit GPG-signs patches when `commit.gpgsign` is set (#12) - Support `core.hooksPath` in git config - Add `-C` option for `stg import` and `stg fold` (#18) ### Changed - Allow importing mail and series from urls (#94) - `stg refresh --edit` may also use `--diff` and `--diff-opts` (#98) - `stg goto` allows sha1 of a patch instead of patch name (#93) ### Fixed - Repair hang in `stg pull -m`, `stg goto -m`, and `stg push -m` - Repair `stg mail` to show diffstat of whole series (#104) - Repair MANIFEST.in to include AUTHORS.md and README.md files ## [1.0] 2021-02-07 ### Removed - Drop support for Python < 3.5 - Remove previously deprecated `stg publish` command - Removed contrib scripts: `stg-swallow`, `stg-fold-files-from`, `stg-dispatch`, `stg-whatchanged`, and `stg-show-old` ### Added - The pre-commit hook is now run for `stg refresh` - New `--spill` option for `stg refresh` - Add stgit.series.description config option (#88) - Official support for Python versions up to 3.9 ### Changed - Stack metadata format 4. All metadata now kept in Git objects; no more stack state files in .git/patches. **A one-way auto-upgrade to format version 4 will occur when StGit commands are run on an existing StGit branch.** - Use `python3` in shebangs instead of `python` - `contrib/stgbashprompt.sh` is no longer executable - Internal docstrings now use reStructuredText instead of Epytext ### Fixed - Importing large patches is much, much faster (#66) - Other performance improvements when dealing with large patches - Repair diffstat when outside work tree root (#62) - Use encoded (string) environment variables on Windows (#79) - Fix `stg pull` when no upstream is configured (#83) - Fix `refresh` crash with path limiting and files added to index (#85) - Repair `new` with patchdescr.template crash (#87) - Repair `log` from worktree subdir with patches specified - Repair `import` allowing/generating duplicate patch names (#64) - Repair `mail --auto` to strip comments after addrs (#91) ## [0.23] 2020-06-12 ### Removed - Drop support for Python 3.3; Python 2 (2.6 and 2.7) remain deprecated, but supported for one last release - Tutorial is removed; it now exists as part of the website ### Deprecated - Python 2.x support is deprecated and will be removed in a future release ### Added - Support html5 output of docs from asciidoc - Add `--expose` option for `stg pick` to allow picked commit message to be customized ### Changed - Limit mail diffstat to 72 columns - Added pyproject.toml file for black configuration - Minimum Git version is 2.2.0 - Quote stg and subcommand in man page synopsis - Replaced RELEASENOTES with this CHANGELOG.md - Replaces Documentation/SubmittingPatches with CONTRIBUTING.md ### Fixed - Repair MANIFEST.in and generated source dist - Repair importing mail with ": " (colon space) in subject - Fix mail cover letter shortlog - Fix mail cover letter diffstat - `stg series` now only outputs colors when `isatty()` - Repair mail SSL check (#57) - Repair `stg mail` with both `-a` and `-e` options (#58) - Remove empty short-opt for `--no-submodules` of `stg refresh` - Repair build.py for Python 2 with explicit `flush()` - `stgit.refreshsubmodules` added to sample gitconfig ### Internal - Update docs build system from upstream Git docs - Use coverage contexts to map commands to covered lines - Improve mail tests - Use GitHub Actions instead of TravisCI - Format StGit source using black formatter ## [0.22] - 2020-03-02 ### Removed - Remove debian packaging; downstream Debian uses its own anyway ### Deprecated - Python 2.x support is deprecated and will be removed in the next StGit release - `stg publish` is deprecated and will be removed in the next StGit release ### Added - `stg import` has new --keep-cr option, like `git mailsplit` ### Changed - `stg new` now includes patch name in log message - `stg branch --rename` can now rename the current branch - `stg branch --create` now works even if the workspace is dirty, consistent with `git checkout` - `stg branch --description` now works on both regular and stgit branches - `stg edit --diff` now implies `--edit` - `stg refresh` and `stg edit` now reset the committer information, consistent with `stg push` - git notes are now preserved when patches are modified - Tutorial improvements - Many additional tests and test improvements - All stgit commands now use "new" git library infrastructure ### Fixed - `stg branch --create` inherits remote correctly from parent committish - Patch names are checked earlier to avoid inconsistent stack states - Improved commit data parsing and handling of non-UTF8 encodings - Repair git error messages when checking stgit version from outside a git repo ## [0.21] - 2019-10-28 ### Changed - Faster handling of large patches (#44) ### Fixed - Build reproducibility repairs (Thanks reproducible-builds.org team!) - Python can now be run with optimizations (`python -O`) - `stg log` now prints trailing newline - Improved command line option parsing for `stg log` ## [0.20] - 2019-10-04 ### Added - `stg patches -d` can now output colored diffs. - `stg publish --overwrite` allows branch to be overwritten instead of creating new commits. - `stg log --clear` deletes the stack's log history. Use with caution. - Fish shell completions for stg. - Zsh completions for stg. - `stg mail --domain` option overrides the host's domain in the message ID. ### Changed - Branch protection metadata now captured in config instead of .git/patches/<branch>protect file. This updates stgit's metadata format from v2 to v3. - `stg diff` no longer shows binary diffs by default. Use `-O--binary` or add `--binary` to stgit.diff-opts in config. - Diagnostic output is now routed to stderr instead of stdout. Diagnostic output is also now sent to stderr unconditionally, i.e. no more isatty() test (#35). - Converted to "new" lib infrastructure: `show`, `patches`, `diff`, `pick`, `pull`, `rebase`, and `fold`. ### Fixed - `stg show` detects conflicting --applied and --unapplied options. - `stg show --stat` now shows commit headers. - `stg patches --diff` now shows proper diff instead of `b'...'` repr of diff. - `stg diff --range` detects some invalid values (e.g. `-r ..`). - Date parsing is now more portable, only use platform specific `date` as last parsing option. Affects, e.g., `stg refresh --authdate`. - Repaired search path for templates to avoid looking in Python site-packages directory. - Ensure stdout and stderr are flushed. Rarely affected `stg diff`. - `stg repair` will now fail if extra command line arguments are provided. - Bash completions are now generated in a reproducible manner. - `stg edit --diff` on an empty patch no longer crashes. - `stg pick` no longer fails when picked commit has empty message (#39). - `stg rebase` no longer crashes when there are conflicts (#34). - `stg pick` no longer crashes if --name is not provided when picking a regular commit object. - Improved test coverage for: branch, diff, pick, sync, - New tests for: files, patches, fold, series - Portable use of iconv, sort, and sed in tests. - Linting using flake8 and isort. - All Python code now conforms to PEP-8. - Updated test infrastructure from git 2.20. - Parallel tests with coverage (`make -j4 coverage`) now works. - Documentation build is not included in code coverage. - Repaired log end messages when using `STGIT_SUBPROCESS_LOG=debug`. - Renamed "dunder" instance attributes to improve debugging. - Fail faster when patch name has slash ('/') (#24). ## [0.19] 2018-11-05 ### Changed - Python 3 support. StGit supports Python 2.6, 2.7, 3.3, 3.4, 3.5, 3.6, and 3.7. PyPy interpreters are also supported. - Submodules are now ignored when checking if working tree is clean. Submodules are also not included by default when refreshing a patch. - Config booleans are now parsed similarly to git-config. - `contrib/stgit.el` is now licenced with GPLv2. - Add continuous integration (travis-ci) and code coverage (coveralls) support. - Many new test cases were added. ### Fixed - Repair handling of emails with utf-8 bodies containing latin-1 characters. Also correctly decode email headers containing quoted encoded words. - StGit's version is now correct/available in the release archive. ## [0.18] 2017-08-14 ### Added - `commit-msg` hook support for easier integration with Gerrit, allowing a Change-Id line to be inserted in the commit message - `stg mail` improvements for 'Suggested-by:' tag and auto generation of Cc for the cover letter based on all tags in the series - `stg mail` bash completion for the --to, --cc and --bcc options based on the content of the [mail "alias"] section of Git configuration - `stg edit --review` option to add a 'Reviewed-by:' tag - `stg pop --spill` functionality to allow popping a patch from the stack while keeping its modification in the tree ### Changed - Project page details updated (gna.org has been shut down) ### Fixed - Various fixes and test coverage improvements

0.1.40 (2024-07-04) * Land #44, Upversion Github actions

@alerque

- Save current MSRV in manifest by @alerque in #44 - Improve graph image calculation and add tests by @lusingander in #45 - Fix ci by @lusingander in #47 - Graph color config by @lusingander in #48 - Half-width graph support by @lusingander in #50 - Minor code cleanup by @lusingander in #51

@krlmlr

# debugme 1.2.0 * debugme now does not instrumented code multiple times, this could happen if environments were referenced from multiple places (#15). * debugme now correctly instruments functions with attributes, the attributes are kept now. Some packages, e.g. `assertthat` create such functions. * debugme now supports debug levels. Relatedly, `debugme()` has a `level` argument now (#49, @krlmlr). * debugme now correctly instruments functions with `NULL` body and functions with no arguments. * Nested calls are printed better now, with indentation (#44, @krlmlr). * `debugme()` now re-reads the `DEBUGME` environment variable (#45, @krlmlr). * New `DEBUGME_SHOW_TIMESTAMP` environment variable to hide timestamp output for reproducibility (#49, @krlmlr). * debugme now does not change the random seed (#50).

@t3chguy

Changes in [1.11.86](https://github.com/element-hq/element-web/releases/tag/v1.11.86) (2024-11-19) ================================================================================================== ## ✨ Features * Deduplicate icons using Compound Design Tokens ([#28419](element-hq/element-web#28419)). Contributed by @t3chguy. * Let widget driver send error details ([#28357](element-hq/element-web#28357)). Contributed by @AndrewFerr. * Deduplicate icons using Compound Design Tokens ([#28381](element-hq/element-web#28381)). Contributed by @t3chguy. * Auto approvoce `io.element.call.reaction` capability for element call widgets ([#28401](element-hq/element-web#28401)). Contributed by @toger5. * Show message type prefix in thread root \& reply previews ([#28361](element-hq/element-web#28361)). Contributed by @t3chguy. * Support sending encrypted to device messages from widgets ([#28315](element-hq/element-web#28315)). Contributed by @hughns. ## 🐛 Bug Fixes * Feed events to widgets as they are decrypted (even if out of order) ([#28376](element-hq/element-web#28376)). Contributed by @robintown. * Handle authenticated media when downloading from ImageView ([#28379](element-hq/element-web#28379)). Contributed by @t3chguy. * Ignore `m.3pid_changes` for Identity service 3PID changes ([#28375](element-hq/element-web#28375)). Contributed by @t3chguy. * Fix markdown escaping wrongly passing html through ([#28363](element-hq/element-web#28363)). Contributed by @t3chguy. * Remove "Upgrade your encryption" flow in `CreateSecretStorageDialog` ([#28290](element-hq/element-web#28290)). Contributed by @florianduros. Changes in [1.11.85](https://github.com/element-hq/element-web/releases/tag/v1.11.85) (2024-11-12) ================================================================================================== # Security - Fixes for [CVE-2024-51750](https://www.cve.org/CVERecord?id=CVE-2024-51750) / [GHSA-w36j-v56h-q9pc](GHSA-w36j-v56h-q9pc) - Fixes for [CVE-2024-51749](https://www.cve.org/CVERecord?id=CVE-2024-51749) / [GHSA-5486-384g-mcx2](GHSA-5486-384g-mcx2) - Update JS SDK with the fixes for [CVE-2024-50336](https://www.cve.org/CVERecord?id=CVE-2024-50336) / [GHSA-xvg8-m4x3-w6xr](GHSA-xvg8-m4x3-w6xr) Changes in [1.11.84](https://github.com/element-hq/element-web/releases/tag/v1.11.84) (2024-11-05) ================================================================================================== ## ✨ Features * Remove abandoned MSC3886, MSC3903, MSC3906 implementations ([#28274](element-hq/element-web#28274)). Contributed by @t3chguy. * Update to React 18 ([#24763](element-hq/element-web#24763)). Contributed by @t3chguy. * Deduplicate icons using Compound ([#28239](element-hq/element-web#28239)). Contributed by @t3chguy. * Replace legacy Tooltips with Compound tooltips ([#28231](element-hq/element-web#28231)). Contributed by @t3chguy. * Deduplicate icons using Compound Design Tokens ([#28219](element-hq/element-web#28219)). Contributed by @t3chguy. * Add reactions to html export ([#28210](element-hq/element-web#28210)). Contributed by @langleyd. * Remove feature\_dehydration ([#28173](element-hq/element-web#28173)). Contributed by @florianduros. ## 🐛 Bug Fixes * Remove upgrade encryption in `DeviceListener` and `SetupEncryptionToast` ([#28299](element-hq/element-web#28299)). Contributed by @florianduros. * Fix 'remove alias' button in room settings ([#28269](element-hq/element-web#28269)). Contributed by @Dev-Gurjar. * Add back unencrypted path in `StopGapWidgetDriver.sendToDevice` ([#28295](element-hq/element-web#28295)). Contributed by @florianduros. * Fix other devices not being decorated as such ([#28279](element-hq/element-web#28279)). Contributed by @t3chguy. * Fix pill contrast in invitation dialog ([#28250](element-hq/element-web#28250)). Contributed by @florianduros. * Close right panel chat when minimising maximised voip widget ([#28241](element-hq/element-web#28241)). Contributed by @t3chguy. * Fix develop changelog parsing ([#28232](element-hq/element-web#28232)). Contributed by @t3chguy. * Fix Ctrl+F shortcut not working with minimised room summary card ([#28223](element-hq/element-web#28223)). Contributed by @t3chguy. * Fix network dropdown missing checkbox \& aria-checked ([#28220](element-hq/element-web#28220)). Contributed by @t3chguy. Changes in [1.11.83](https://github.com/element-hq/element-web/releases/tag/v1.11.83) (2024-10-29) ================================================================================================== ## ✨ Features * Enable Element Call by default on release instances ([#28314](element-hq/element-web#28314)). Contributed by @t3chguy. Changes in [1.11.82](https://github.com/element-hq/element-web/releases/tag/v1.11.82) (2024-10-22) ================================================================================================== ## ✨ Features * Deduplicate more icons using Compound Design Tokens ([#132](element-hq/matrix-react-sdk#132)). Contributed by @t3chguy. * Always show link new device flow even if unsupported ([#147](element-hq/matrix-react-sdk#147)). Contributed by @t3chguy. * Update design of files list in right panel ([#144](element-hq/matrix-react-sdk#144)). Contributed by @t3chguy. * Remove feature\_dehydration ([#138](element-hq/matrix-react-sdk#138)). Contributed by @florianduros. * Upgrade emojibase-bindings and remove local handling of emoticon variations ([#127](element-hq/matrix-react-sdk#127)). Contributed by @langleyd. * Add support for rendering media captions ([#43](element-hq/matrix-react-sdk#43)). Contributed by @tulir. * Replace composer icons with Compound variants ([#123](element-hq/matrix-react-sdk#123)). Contributed by @t3chguy. * Tweak default right panel size to be 320px except for maximised widgets at 420px ([#110](element-hq/matrix-react-sdk#110)). Contributed by @t3chguy. * Add a pinned message badge under a pinned message ([#118](element-hq/matrix-react-sdk#118)). Contributed by @florianduros. * Ditch right panel tabs and re-add close button ([#99](element-hq/matrix-react-sdk#99)). Contributed by @t3chguy. * Force verification even for refreshed clients ([#44](element-hq/matrix-react-sdk#44)). Contributed by @dbkr. * Update emoji text, border and background colour in timeline ([#119](element-hq/matrix-react-sdk#119)). Contributed by @florianduros. * Disable ICE fallback based on well-known configuration ([#111](element-hq/matrix-react-sdk#111)). Contributed by @t3chguy. * Remove legacy room header and promote beta room header ([#105](element-hq/matrix-react-sdk#105)). Contributed by @t3chguy. * Respect `io.element.jitsi` `useFor1To1Calls` in well-known ([#112](element-hq/matrix-react-sdk#112)). Contributed by @t3chguy. * Use Compound close icon in favour of mishmash of x/close icons ([#108](element-hq/matrix-react-sdk#108)). Contributed by @t3chguy. ## 🐛 Bug Fixes * Correct typo in option documentation ([#28148](element-hq/element-web#28148)). Contributed by @AndrewKvalheim. * Revert #124 and #135 ([#139](element-hq/matrix-react-sdk#139)). Contributed by @dbkr. * Add aria-label to e2e icon ([#136](element-hq/matrix-react-sdk#136)). Contributed by @florianduros. * Fix bell icons on room list hover being black squares ([#135](element-hq/matrix-react-sdk#135)). Contributed by @dbkr. * Fix vertical overflow on the mobile register screen ([#137](element-hq/matrix-react-sdk#137)). Contributed by @langleyd. * Allow to unpin redacted event ([#98](element-hq/matrix-react-sdk#98)). Contributed by @florianduros.

@brownag

# wk 0.9.4 - Ensure package tests pass against sf 1.0-18 (#224, #225). # wk 0.9.3 - Ensure package compiles with `STRICT_R_HEADERS=1` (#222). # wk 0.9.2 - Add `wk_crs()` and `wk_set_crs()` methods for `bbox` (#213) - Fix wk_trans inconsistent meta flags handling (#217) - Ensure package builds on arm64 for Windows (#220) # wk 0.9.1 - Fix format strings/arguments for R-devel (#209). # wk 0.9.0 ## Breaking changes - The common well-known binary representation of POINT EMPTY (i.e., POINT (nan nan)) is now handled as POINT EMPTY allowing empty points to roundtrip through `wkb()` vectors (#196, #204). - `xy(NA, NA)` is now read as a null feature instead of POINT EMPTY. This preserves the invariant that null features can also be identified using `is.na()` (#205). - `xy(NaN, NaN)` is now read as POINT EMPTY and `is.na(xy(NaN, NaN))` now returns `FALSE`. This means that both EMPTY and null points can roundtrip through `xy()` (#205). ## Bugfixes and improvements - `wk_meta()` now contains a new column `is_empty`, which is `TRUE` for any feature that contains at least one non-empty coordinate. This allows more efficient detection of features with zero coordinates (#197, #199). - Updated PROJ data to use the latest pull of the database packaged with PROJ 9.3.0 (#201). - The wk package now compiles once again on gcc 4.8 (#203, #206). - Fixed `sfc_writer()` to correctly attach the `classes` attribute to sfc output with mixed geometry types (#195). - Function `sfc_writer()` now has an argument `promote_multi` to write any input as the MULTI variant. This makes it more likely that an input vector will be read as a single geometry type (#198). - The `wk_collection_filter()` now correctly increments the `part_id` when calling the child handler (@brownag, #194). # wk 0.8.0 * Added `wkb_to_hex()` (@anthonynorth, #183). * Implemented `vctrs::vec_proxy_equal()` for `wkb()` vctrs (@anthonynorth, #183). * Fixed `sfc_writer()`, which had returned NULL for some inputs (e.g., via `wk_collection()`) (@anthonynorth, #182, #186). * Added `wk_clockwise()` and `wk_counterclockwise()` to re-wind polygon rings (@anthonynorth, #188). * New replacement-function mode for `wk_coords<-()` for in-place modification of coordinates (@mdsumner, #187). * New function `wk_trans_explicit()` migrated from crs2crs (@mdsumner, #187). # wk 0.7.3 * Fix tests for updated waldo package (#178). # wk 0.7.2 * Fix use-after-free warnings. # wk 0.7.1 * Fix implicit reliance on error `as.data.frame.default()`, which no longer occurs in r-devel (#166). # wk 0.7.0 * Remove legacy headers that are no longer used by any downstream package (#146). * `validate_wk_wkt()` now errors for an object that does not inherit from 'wk_wkt' (#123, #146). * Added `wk_crs_projjson()` to get a JSON representation of a CRS object. To make lookup possible based on shortcut-style CRS objects (e.g., `"EPSG:4326"` or `4326`), added data objects `wk_proj_crs_view` and `wk_proj_crs_json` that contain cached versions of rendered PROJJSON based on the latest PROJ version (#147). * Added a `wk_crs_proj_definition()` method for `wk_crs_inherit()` (#136, #147). * Conversion to sf now uses the `sfc_writer()` for all wk classes, making conversions faster and fixing at least one issue with conversion of NA geometries to sf (#135). * `wk_plot()` now plots `NULL`/`NA` geometries and mixed geometry types more reliably (#142, #143, #149). * Exported EMPTY geometries to well-known text now include dimension (e.g., `POINT Z EMPTY`) (#141, #150). * Fixed bug where `wk_polygon()` doubled some points when the input contained closed rings (#134, #151). * Fixed bug where `wk_count()` exposed uninitialized values for empty input (#139, #153). * The `xy_writer()` now opportunistically avoids allocating vectors for Z or M values unless they are actually needed (#131, #154). * Added example WKT for all geometry types and dimensions plus helper `wk_example()` to access them and set various properties (#155). * Fixes warnings when compiling with `-Wstrict-prototypes` (#157, #158). * Removed `wk_chunk_map_feature()` in favour of using chunking strategies directly (#132, #159). * Optimized `wk_coords()` for `xy()` objects (#138, #160). * Added accessor methods for record-style vectors: `rct_xmin()`, `rct_xmax()`, `rct_ymin()`, `rct_ymax()`, `rct_width()`, `rct_height()`, `crc_center()`, `crc_x()`, `crc_y()`, `crc_r()`, `xy_x()`, `xy_y()`, `xy_z()`, and `xy_m()` (#144, #161). * Added rectangle operators `rct_intersects()`, `rct_contains()`, and `rct_intersection()` (#161). # wk 0.6.0 * Fixed `wk_affine_rescale()` to apply the translate and scale operations in the correct order (#94). * Add `wk_handle_slice()` and `wk_chunk_map_feature()` to support a chunk + apply workflow when working with large vectors (#101, #107). * C and R code was rewritten to avoid materializing ALTREP vectors (#103, #109). * Added a `wk_crs_proj_definition()` generic for foreign CRS objects (#110, #112). * Added `wk_crs_longlat()` helper to help promote authority-compliant CRS choices (#112). * Added `wk_is_geodesic()`, `wk_set_geodesic()`, and argument `geodesic` in `wkt()` and `wkb()` as a flag for objects whose edges must be interpolated along a spherical/ellipsoidal trajectory (#112). * Added `sf::st_geometry()` and `sf::st_sfc()` methods for wk geometry vectors for better integration with sf (#113, #114). * Refactored well-known text parser to be more reusable and faster (#115, #104). * Minor performance enhancement for `is.na()` and `validate_wk_wkb()` when called on a very long `wkb()` vector (#117). * Fixed issue with `validate_wk_wkb()` and `validate_wk_wkt()`, which failed for most valid objects (#119). * Added `wk_envelope()` and `wk_envelope_handler()` to compute feature-wise bounding boxes (#120, #122). * Fixed headers and tests to pass on big endian systems (#105, #122). * Incorporated the geodesic attribute into vctrs methods, data frame columns, and bbox/envelope calculation (#124, #125). * Fix `as_xy()` for nested data frames and geodesic objects (#126, #128). * Remove deprecated `wkb_problems()`, `wkt_problems()`, `wkb_format()`, and `wkt_format()` (#129). * `wk_plot()` is now an S3 generic (#130). # wk 0.5.0 * Fixed bugs relating to the behaviour of wk classes as vectors (#64, #65, #67, #70). * `crc()` objects are now correctly exported as polygons with a closed loop (#66, #70). * Added `wk_vertices()` and `wk_coords()` to extract individual coordinate values from geometries with optional identifying information. For advanced users, the `wk_vertex_filter()` can be used as part of a pipeline to export coordinates as point geometries to another handler (#69, #71). * Added `wk_flatten()` to extract geometries from collections. For advanced users, the `wk_flatten_filter()` can be used as part of a pipeline (#75, #78). * `options("max.print")` is now respected by all vector classes (#72, #74). * Moved implementation of plot methods from wkutils to wk to simplify the dependency structure of both packages (#80, #76). * Added `wk_polygon()`, `wk_linestring()`, and `wk_collection()` to construct polygons, lines, and collections. For advanced users, `wk_polygon_filter()`, `wk_linestring_filter()`, and `wk_collection_filter()` can be used as part of a pipeline (#77, #84). * Added a C-level transform struct that can be used to simplify the the common pattern of transforming coordinates. These structs can be created by other packages; however, the `wk_trans_affine()` and `wk_trans_set()` transforms are also built using this feature. These are run using the new `wk_transform()` function and power the new `wk_set_z()`, `wk_set_m()`, `wk_drop_z()`, `wk_drop_m()`, functions (#87, #88, #89). # wk 0.4.1 * Fix LTO and MacOS 3.6.2 check errors (#61). # wk 0.4.0 * Removed `wksxp()` in favour of improved `sf::st_sfc()` support (#21). * Rewrite existing readers, writers, and handlers, using a new C API (#13). * Use new C API in favour of header-only approach for all wk functions (#19, #22). * Use cpp11 to manage safe use of callables that may longjmp from C++. * Vector classes now propagate `attr(, "crs")`, and check that operations that involve more than one vector have compatable CRS objects as determined by `wk_crs_equal()`. * Added an R-level framework for other packages to implement wk readers and handlers: `wk_handle()`, `wk_translate()`, and `wk_writer()` (#37). * Added a native reader and writer for `sf::st_sfc()` objects and implemented R-level generics for sfc, sfg, sf, and bbox objects (#28, #29, #38, #45). * Implement `crc()` vector class to represent circles (#40). * Added a 2D cartesian bounding box handler (`wk_bbox()`) (#42). * Refactored unit tests reflecting use of the new API and for improved test coverage (#44, #45, #46). * Added `wk_meta()`, `wk_vector_meta()`, and `wk_count()` to inspect properties of vectors (#53). * Modified all internal handlers such that they work with vectors of unknown length (#54). # wk 0.3.4 * Fixed reference to `wkutils::plot.wk_wksxp()`, which no longer exists. # wk 0.3.3 * Fixed WKB import of ZM geometries that do not use EWKB. * Added `xy()`, `xyz()`, `xym()` and `xyzm()` classes to efficiently store point geometries. * Added the `rct()` vector class to efficiently store two-dimensional rectangles. * Fixed the CRAN check failure caused by a circular dependency with the wkutils package. * Added S3 methods to coerce sf objects to and from `wkt()`, `wkb()` and `wksxp()`. # wk 0.3.2 * Fixed EWKB output for collections and multi-geometries that included SRID (#3). * Fixed CRAN check errors related to exception handling on MacOS/R 3.6.2. # wk 0.3.1 * Added a `NEWS.md` file to track changes to the package.

# farver 2.1.2 * make sure output channels are always named (#23) * farver can now decode short version hex-code colours (#41) * Fix a bug in colour comparison that affected hcl input (#44)

@ducmtran

2.6.0 (2024-11-24) External changes * Expectation with never cardinality should display deprecation warning (#681) - thanks to @ducmtran for reporting and testing WARNING: This release results in some incorrect deprecation warnings: * The logic for displaying the deprecation warnings is fixed in v2.6.1 (#686). Internal changes * Simplify backtrace related assertions (#680) * Remove unused ExpectationList#match_but_out_of_order (f2fa9919) 2.6.1 (2024-11-28) External changes * Fix logic for displaying deprecation warning for expectation with never cardinality (#686) - thanks to @davidstosik for reporting 2.7.0 (2024-12-07) External changes * Fail fast if invocation matches never expectation (#679, #678, #490, #131 & #44) - thanks to @ducmtran & @davidstosik for reporting Internal changes * Workaround for JRuby jar-dependencies issue (#690) * Ruby v3.4 stacktrace uses single-quote vs backtick (#688 & #689) - thanks to Vít Ondruch WARNING: This release fixes a very old bug * The bug relates to the use of Expectation#never in combination with other expectations on the same method. * Please ensure you fix the relevant deprecation warnings when running against v2.6.1 before upgrading to v2.7.0. * Previously, the following test would have passed, but now it will fail with an unexpected invocation error on the foo.bar line. foo = mock('foo') foo.stubs(:bar) foo.expects(:bar).never foo.bar 2.7.1 (2024-12-09) External changes * Deprecate Configuration#stubbing_method_on_nil= (#694) * Indicate when parameter matcher logic is defined by block passed to Expectation#with (#698, b30e4434) * Improve documentation for Expectation#with, especially when it is passed a block (#698, #682, #606 & #681)

siepkes force-pushed the cjose_trunk branch from d84be31 to 5319a9a Compare March 14, 2019 20:47

siepkes force-pushed the cjose_trunk branch from 5319a9a to f9c22c8 Compare March 14, 2019 21:01

krytarowski reviewed Mar 14, 2019

View reviewed changes

siepkes force-pushed the cjose_trunk branch from f9c22c8 to b3eccc7 Compare March 15, 2019 09:26

siepkes force-pushed the cjose_trunk branch 2 times, most recently from 1b2fd5b to 93cffb7 Compare March 15, 2019 10:58

siepkes force-pushed the cjose_trunk branch from 93cffb7 to c836136 Compare March 15, 2019 12:17

Added cjose library.

1aae19b

cjose is a C library implementing the Javascript Object Signing and Encryption (JOSE).

siepkes force-pushed the cjose_trunk branch from c836136 to 1aae19b Compare March 15, 2019 12:18

netbsd-srcmastr closed this in a9bccef Mar 16, 2019

netbsd-srcmastr pushed a commit that referenced this pull request Aug 31, 2023

sysutils/bkt: update to 0.7.1

ce048d0

- Patch release to pick up the fix for #44 which was a regression introduced in 0.7.0.

netbsd-srcmastr pushed a commit that referenced this pull request Jul 19, 2024

security/ruby-rex-exploitation: update to 0.1.40

8d22f76

0.1.40 (2024-07-04) * Land #44, Upversion Github actions

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Added cjose library. #44

Added cjose library. #44

siepkes commented Mar 14, 2019

iamleot commented Mar 14, 2019 via email

iamleot commented Mar 14, 2019 via email

siepkes commented Mar 14, 2019

krytarowski Mar 14, 2019

siepkes Mar 15, 2019

krytarowski Mar 15, 2019

iamleot commented Mar 15, 2019 via email

krytarowski commented Mar 15, 2019

siepkes commented Mar 15, 2019

iamleot commented Mar 15, 2019 via email

siepkes commented Mar 15, 2019


		PKGCONFIG_OVERRIDE+= cjose.pc.in

		.include "../../textproc/jansson/buildlink3.mk"

Added cjose library. #44

Added cjose library. #44

Conversation

siepkes commented Mar 14, 2019

iamleot commented Mar 14, 2019 via email

iamleot commented Mar 14, 2019 via email

siepkes commented Mar 14, 2019

krytarowski Mar 14, 2019

Choose a reason for hiding this comment

siepkes Mar 15, 2019

Choose a reason for hiding this comment

krytarowski Mar 15, 2019

Choose a reason for hiding this comment

iamleot commented Mar 15, 2019 via email

krytarowski commented Mar 15, 2019

siepkes commented Mar 15, 2019

iamleot commented Mar 15, 2019 via email

siepkes commented Mar 15, 2019