Update v120123-1
If you're updating your current files MAKE A BACKUP
If you have an error : ".../steppers/steppers-basic.cfg' does not exist"
See the files in config/printing-profiles/ and select the good path for each one
To make it easier for our fresh new users, the last one is selected by default
I was using a Mainsail release older than some people install since 31/12/22. It's was a problem for the folder path so :
- New universal files path for [include] function in :
- printer.cfg
- /config/include.cfg
- /config/steppers/x.cfg files
- /config/drivers/x.cfg files - For printing-profile files (basic, stealthchop or performance if you use :
- the new path on a new install = NOTHING TO CHANGE
- the old path on an older install = go to /config/printing-profiles/ and select your path
Update v120123
If you're updating your current files MAKE A BACKUP
Changes and additions :
- This release use a new folder architecture that's not going to change in the future. You have to overwrite your actual files, printer.cfg included (don't forget to save it before and copy and paste your additions and saved parameter at the bottom of the file)
- 3 printing profile to choose on printer.cfg :
- Basic : activated by default, runing spreadcyle with no interpolation, 64 microsteps on axis
- Stealthchop : using stealthchop with interpolation, 16 microsteps on axis and lower current values
- Performance : (old speed_profile) runing spreadcyle with no interpolation, 32 microsteps on axis and higher current values
- TMC2209 : changed sensorless homing values on X and Y to prevent incorrect moves = driver_SGTHRS: 75 vs 81 before (the 81 value is still used for the perfomance profile in config/printing-profiles/performance.cfg)