Container images to be used with kubeflow on the AAW platform for Data Science & other workloads.
- Introduction
- List of maintained images in this github repository
- Using
- General Development Workflow
- Other Development Notes
- Structure
Our Container images are based on the community driven jupyter/docker-stacks. We chose those images because they are continuously updated and install the most common utilities. This enables us to focus only on the additional toolsets that we require to enable our data scientists. These customized images are maintained by the AAW team and are the default images available on the kubeflow UI.
This is different from the aaw-contrib-containers as those images are built by AAW user-base.
These are often created when a user's workload is more specific and our generic images are not suitable for them.
Those images can be used via the custom-image feature in kubeflow and do not populate the default images drop-down.
Additionally, the AAW team is not responsible for maintaining those images.
| Image Name | Notes | Extra Installations |
|---|---|---|
| docker-stacks-datascience-notebook | Debugging Dockerfile that builds quicker than other images | |
| jupyterlab-cpu | The base experience. A jupyterlab notebook with various installations. | VsCode, R, Julia |
| jupyterlab-pytorch | For users looking to leverage a GPU machine. Comes installed with pytorch | pytorch, torchvision |
| jupyterlab-tensorflow | For users looking to leverage a GPU machine. Comes installed with tensorflow | tensorflow-gpu |
| remote-desktop | For users looking to have a desktop-like experience. | Open M++, QGIS |
| rstudio | For users looking to have a rstudio tuned experience. | |
| sas | Similar to our jupyterlab-cpu image, except with SAS. This is only available to Statistics Canada employees as that is what our license allows. |
Use make generate-dockerfiles to generate all Dockerfiles.
These will be written to ./output/imagename,
along with any required files for the build context
Use make build/IMAGENAME to build an already generated (see above) Dockerfile.
This by default generates images with:
repo=k8scc01covidacr.azurecr.iotag=BRANCH_NAMEFor example:k8scc01covidacr.azurecr.io/IMAGENAME:BRANCH_NAME.
make build also accepts arguments for REPO and TAG to override these behaviours.
For example, make build/jupyterlab-cpu REPO=myrepo TAG=notLatest.
make post-build/IMAGENAME is meant for anything that is commonly done after building an image, but currently only adds common tags.
It adds tags of SHA, SHORT_SHA, and BRANCH_NAME to the given image,
and accepts a SOURCE_FULL_IMAGE_NAME argument if you're trying to tag an existing image that has a non-typical name.
For example:
make post-build/IMAGENAMEwill apply SHA, SHORT_SHA, and BRANCH_NAME tags tok8scc01covidacr.azurecr.io/IMAGENAME:BRANCH_NAME(eg: using the default REPO and TAG names)make post-build/IMAGENAME SOURCE_FULL_IMAGE_NAME=oldRepo/oldImage:oldTag REPO=newRepowill make the following new aliases foroldRepo/oldImage:oldTag REPO=newRepo:newRepo/IMAGENAME:SHAnewRepo/IMAGENAME:SHORT_SHAnewRepo/IMAGENAME:BRANCH_NAME
make pull/IMAGENAME and make push/IMAGENAME work similarly to make build/IMAGENAME.
REPO and TAG arguments are available to override their default values.
Note: To use make pull or make push,
you must first log in to ACR (az acr login -n k8scc01covidacr)
Note: make push by default does docker push --all-tags in order to push the SHA, SHORT_SHA, etc., tags.
To test an image interactively, use make dev/IMAGENAME.
This docker run's a built image,
automatically forwarding ports to your local machine and providing a link to connect to.
Automated tests are included for the generated Docker images using pytest.
This testing suite is modified from the docker-stacks test suite.
Image testing is invoked through make test/IMAGENAME (with optional REPO and TAG arguments like make build).
Testing of a given image consists of general and image-specific tests:
└── tests
├── general # General tests applied to all images
│ └── some_general_test.py
├── jupyterlab-cpu # Test applied to a specific image
│ └── some_jupyterlab-cpu-specific_test.py
└── jupyterlab-tensorflow
Where tests/general tests are applied to all images,
and tests/IMAGENAME are applied only to a specific image.
Pytest will start the image locally and then run the provided tests to determine if Jupyterlab is running, python packages are working properly, etc.
Tests are formatted using typical pytest formats (python files with def test_SOMETHING() functions).
conftest.py defines some standard scaffolding for image management, etc.
- Clone the repository with
git clone https://github.com/StatCan/aaw-kubeflow-containers. - Generate Dockerfiles through
make generate-dockerfiles - Run
make install-python-dev-venvto build a development Python virtual environment. - Build your image using
make build/IMAGENAME, e.g. runmake build/jupyterlab-tensorflow. - Test your image using automated tests through
make test/IMAGENAME, e.g. runmake test/jupyterlab-tensorflow. - Veiw your images with
docker images. You should see a table printed in the console with your images. For example you may see:
username@hostname:~$ docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
k8scc01covidacr.azurecr.io/jupyterlab-tensorflow master 13f8dc0e4f7a 26 minutes ago 14.6GB
k8scc01covidacr.azurecr.io/jupyterlab-pytorch master 2b9acb795079 19 hours ago 15.5GB
jupyter/datascience-notebook 9ed3b8de5de1 9a0c8d86de1a 5 weeks ago 4.25GB
- Run your image with
docker run -p 8888:8888 REPO/IMAGENAME:TAG, e.g.docker run -p 8888:8888 k8scc01covidacr.azurecr.io/jupyterlab-tensorflow:master. - Open http://localhost:8888 or
<ip-address-of-server>:8888.
- Clone the repo
- (optional)
make pull/IMAGENAME TAG=SOMEEXISTINGTAGto pull an existing version of the image you are working on (this could be useful as a build cache to reduce development time below) - Edit an image via the docker-bits that are used to create it,
not the files in the output/ folder.
Same goes for the shell scripts and json files - they should be modified from the resources folder.
- For quick-iteration debugging you can directly edit the
./outputfiles, but make sure you commit any changes you want to keep back to the./docker-bits
- For quick-iteration debugging you can directly edit the
- Generate new Dockerfiles through
make generate-dockerfiles - Build your edited image using
make build/IMAGENAME(if you pulled a version of it above, you can usemake build/IMAGENAME DARGS="--cache-from SOMEOLDREPO/SOMEOLDIMAGE:SOMETAG", which will speed up your build by using layers from the pulled image as cached layers if possible) - Test your image:
- using automated tests through
make test/IMAGENAME - manually by
docker run -it -p 8888:8888 REPO/IMAGENAME:TAG, then opening it in http://localhost:8888
- using automated tests through
GitHub Actions CI is enabled to do building, scanning, automated testing, and (optionally) pushing of our images to ACR.
Build, test, and scan CI triggers on:
- any push to master
- any push to an open PR This allows for easy scanning and automated testing for images.
Pushing images to ACR triggers on:
- any push to master
- any push to an open PR that also has the
auto-deploylabel
Pushes to the master branch will push to the k8scc01covidacr.azurecr.io ACR and these are accessible from both the dev and prod cluster.
You can access these images using any of the following:
- k8scc01covidacr.azurecr.io/IMAGENAME:SHA
- k8scc01covidacr.azurecr.io/IMAGENAME:SHORT_SHA
- k8scc01covidacr.azurecr.io/IMAGENAME:latest
- k8scc01covidacr.azurecr.io/IMAGENAME:v1
Pushes to an open PR that also has the auto-deploy label on the PR are accessible only from the dev cluster
You can access these images using any of the following:
- k8scc01covidacrdev.azurecr.io/IMAGENAME:SHA
- k8scc01covidacrdev.azurecr.io/IMAGENAME:SHORT_SHA
- k8scc01covidacrdev.azurecr.io/IMAGENAME:BRANCHNAME
- k8scc01covidacrdev.azurecr.io/IMAGENAME:dev (for convenience in testing)
Images pushed to the dev acr are only available to the DEV cluster, attempting to use them in prod will fail.
NOTE: ACR has an image retention policy
The files in the docker-bits directory each make up a part of the final dockerfile and are combined depending on what type of dockerfile is being generated.
You can see which "docker-bits" go into the dockerfile under their respective 'target'.
For example for the remote-desktop image you can see the following in the makefile
mkdir -p $(OUT)/$@
echo "REMOTE DESKTOP"
cp -r scripts/remote-desktop $(OUT)/$@
cp -r resources/common/. $(OUT)/$@
cp -r resources/remote-desktop/. $(OUT)/$@
## HERE IS WHAT GOES INTO THE DOCKERFILE
$(CAT) \
$(SRC)/0_Rocker.Dockerfile \
$(SRC)/3_Kubeflow.Dockerfile \
$(SRC)/4_CLI.Dockerfile \
$(SRC)/6_remote-desktop.Dockerfile \
$(SRC)/7_remove_vulnerabilities.Dockerfile \
$(SRC)/∞_CMD_remote-desktop.Dockerfile \
> $(OUT)/$@/Dockerfile
The first portion sets up and copies locally what scripts or utilities the final Dockerfile will need.
The second portion then creates the Dockerfile using the listed dockerbits.
In this example it begins with 0_Rocker.Dockerfile and ends with ∞_CMD_remote-desktop.Dockerfile.
The Makefile sits in the root level of this directory and orchestrates the final dockerfile using the make generate-dockerfiles command.
The segments of Dockerfiles are assembled.
Each docker-bit can be identified from it's opening comment in the Dockerfile.
All output images should meet the following criteria:
- be generated by calling
make generate-dockerfiles - have outputs written to
output/imagename, whereimagenameis a valid Docker image name (eg: all lowercase, no special characters)
Before pushing to a branch ensure you run make generate-dockerfiles,
because if the output dockerfiles are out of sync from the make generate-dockerfiles the CI will fail.
Software needs to be added by modifying the relevant docker-bit,
then following the normal build instructions starting with the Generate Dockerfiles step.
Be selective with software installation as image sizes are already quite big (8Gb plus), and increasing that size would negatively impact the time it takes up for a workspace server to come up (as well as first time image pulls to a node). In such cases it may be more relevant to make an image under aaw-contrib-containers as mentioned earlier.
To add new images, edit the makefile such that it generates the ./output/imagename directory.
You can usually follow the existing recipes (or even add an extra piece to them),
or you can add a whole new make target (but make sure to add your new target to make generate-dockerfiles as well).
If making changes to CI that cannot be done on a branch (eg: changes to issue_comment triggers), you can:
- fork the 'kubeflow-containers' repo
- Modify the CI with
- REGISTRY: (your own dockerhub repo, eg: "j-smith" (no need for the full url))
- Change
to
- uses: azure/docker-login@v1 with: login-server: ${{ env.REGISTRY_NAME }}.azurecr.io username: ${{ secrets.REGISTRY_USERNAME }} password: ${{ secrets.REGISTRY_PASSWORD }}- uses: docker/login-action@v1 with: username: ${{ secrets.REGISTRY_USERNAME }} password: ${{ secrets.REGISTRY_PASSWORD }}
- In your forked repo, define secrets for REGISTRY_USERNAME and REGISTRY_PASSWORD with your dockerhub credentials (you should use an API token, not your actual dockerhub password)
Note: Since pushing comes right at the end of the CI, in many cases you don't need to have a valid registry to test the CI on a fork. It will fail on the push step, but all other steps will clearly work and you can know it should safely merge back into the main repo.
These tags are intended to be long-lived in that they will not change.
Subsequent pushes will clobber the previous IMAGENAME:latest image.
This means that IMAGENAME:latest will be updated automatically as changes are made,
so updates to the tag are not needed.
The v1 tag is intended for when we encounter a breaking change,
but still want to support the features of that current image.
A new v2 tag will be created for adding these breaking changes.
The Dockerfiles in this repo are intended to construct compute environments for a non-root user jovyan to ensure the end user has the least privileges required for their task,
but installation of some of the software needed by the user must be done as the root user.
This means that installation of anything that should be user editable (eg: pip and conda installs, additional files in /home/$NB_USER, etc.) will by default be owned by root and not modifiable by jovyan.
Therefore we must change the permissions of these files to allow the user specific access for modification.
For example, most pip install/conda install commands occur as the root user and result in new files in the $CONDA_DIR directory that will be owned by root and cause issues if user jovyan tried to update or uninstall these packages (as they by default will not have permission to change/remove these files).
To fix this issue, end any RUN command that edits any user-editable files with:
fix-permissions $CONDA_DIR && \
fix-permissions /home/$NB_USER
This fix edits the permissions of files in these locations to allow user access. Note that if these are not applied in the same layer as when the new files were added it will result in a duplication of data in the layer because the act of changing permissions on a file from a previous layer requires a copy of that file into the current layer. So something like:
RUN add_1GB_file_with_wrong_permissions_to_NB_USER.sh && \
fix-permissions /home/$NB_USER
would add a single layer of about 1GB, whereas
RUN add_1GB_file_with_wrong_permissions_to_NB_USER.sh
RUN fix-permissions /home/$NB_USER
would add two layers, each about 1GB (2GB total).
If running using a VM and RStudio image was built successfully but is not opening correctly on localhost (error 5000 page), change your CPU allocation in your Linux VM settings to >= 3. You can also use your VM's system monitor to examine if all CPUs are 100% being used as your container is running. If so, increase CPU allocation. This was tested on Linux Ubuntu 20.04 virtual machine.
.
├── Makefile # Cats the docker-bits together
│
├── docker-bits # The docker snippets. Numbering indicates the DAG.
│ ├── 0_CPU.Dockerfile
│ ├── 1_CUDA-11.6.Dockerfile
│ ├── 1_CUDA-11.7.Dockerfile
│ ├── 2_PyTorch.Dockerfile
│ ├── 2_Tensorflow.Dockerfile
│ ├── 3_Kubeflow.Dockerfile
│ ├── 4_CLI.Dockerfile
│ ├── 5_DB-Drivers.Dockerfile
│ ├── 6_JupyterLab.Dockerfile
│ ├── 6_RStudio.Dockerfile
│ ├── 6_JupyterLab-OL-compliant.Dockerfile
│ ├── 6_RemoteDesktop.Dockerfile
│ ├── ∞_CMD.Dockerfile
│ └── ∞_CMD_RemoteDesktop.Dockerfile
│
├── make_helpers # Scripts used by makefile
│ ├── get_branch_name.sh
│ └── post-build-hook.sh
│
├── output # Staging area for a `docker build .`
│ ├── docker-stacks-datascience-notebook/
│ ├── jupyterlab-cpu/
│ ├── jupyterlab-pytorch/
│ ├── jupyterlab-tensorflow/
│ ├── remote-desktop/
│ ├── rstudio/
│ └── sas/
│
├── resources # the Docker context (files for COPY)
│ ├── common # files required by all images
│ │ ├── jupyter-ompp-proxy/
│ │ ├── aaw-suspend-server.sh
│ │ ├── clean-layer.sh
│ │ ├── jupyterlab-overrides.json
│ │ ├── languagepacks.json
│ │ ├── mc-tenant-wrapper.sh
│ │ ├── pip.conf
│ │ ├── README.md
│ │ ├── restart-oms.sh
│ │ ├── Rprofile.site
│ │ ├── shell_helpers.sh
│ │ ├── start-custom.sh
│ │ ├── start-oms.sh
│ │ ├── trino-wrapper.sh
│ │ └── vscode-overrides.json
│ ├── remote-desktop # directory containing files only for the remote desktop
│ │ ├── desktop-files/ # desktop configuration
│ │ ├── French/ # files to support i18n of remote desktop
│ │ ├── novnc/
│ │ ├── qgis-2022.gpg.key # expires annually aug ~8
│ │ ├── README.md
│ │ └── start-remote-desktop.sh
│ └── sas
│ ├── G-CONFID107003ELNX6494M7/
│ ├── jupyter-sasstudio-proxy/
│ ├── sascfg.py
│ ├── sasv9_local.cfg
│ └── spawner_usermods.sh
│
├── scripts # Helper Scripts (NOT automated.)
│ ├── remote-desktop # Scripts installing applications on remote desktop
│ │ ├── firefox.sh
│ │ ├── fix-permissions
│ │ ├── minio-launcher.py
│ │ ├── pspp.sh
│ │ ├── qgis.sh
│ │ ├── r-studio-desktop.sh
│ │ ├── README.md
│ │ └── vs-code-desktop.sh
│ ├── CHECKSUMS
│ ├── checksums.sh
│ ├── get-nvidia-stuff.sh
│ ├── get-spark-stuff.sh
│ └── README.md
│
└── tests
├── general/ # General tests applied to all images
├── jupyterlab-cpu/ # Test applied to a specific image
├── jupyterlab-pytorch/
├── jupyterlab-tensorflow/
└── README.md