Compiles LaTeX documents through an HTTP API.
See TUG2020 introduction to LaTeX-on-HTTP genesis.
Available on https://latex.ytotech.com as an open-alpha.
This alpha is open to everyone to test the API, collect as much feedbacks as possible and help develop the service. Feedbacks welcome! Mail me at [email protected]
Try the interactive demo: https://latex-http-demo.ytotech.com
As noted above, the API is likely to change along the way. There will be no special notice before changes are rolled out until the API is stabilized.
You can pass your LaTeX document to compile in a content GET parameter:
You can also pass your document by url using url parameter:
It is possible to specify the LaTeX compiler with compiler parameter:
When you need to add annex resources (for eg. other LaTeX files or image files), you can specify them using resource-path[], resource-value[] and resource-type[] parameters:
![https://latex.ytotech.com/builds/sync?content=content=\documentclass{article} \usepackage{graphicx} \begin{document} Hello World \includegraphics[height%3D2cm%2Cwidth%3D7cm%2Ckeepaspectratio%3Dtrue]{logo.png} \end{document}&resource-type[]=url&resource-path[]=logo.png&resource-value[]=https://www.ytotech.com/images/ytotech_logo.png](https://latex.ytotech.com/builds/sync?content=%5Cdocumentclass%7Barticle%7D%20%5Cusepackage%7Bgraphicx%7D%20%5Cbegin%7Bdocument%7D%20Hello%20World%20%5Cincludegraphics%5Bheight%3D2cm%2Cwidth%3D7cm%2Ckeepaspectratio%3Dtrue%5D%7Blogo.png%7D%20%5Cend%7Bdocument%7D&resource-type%5B%5D=url&resource-path%5B%5D=logo.png&resource-value%5B%5D=https://www.ytotech.com/images/ytotech_logo.png){kind=link}
With Curl:
curl -v -X POST https://latex.ytotech.com/builds/sync \
-H "Content-Type:application/json" \
-d '{
"compiler": "lualatex",
"resources": [
{
"main": true,
"content": "\\documentclass{article}\n \\usepackage{graphicx}\n \\begin{document}\n Hello World\\\\\n \\includegraphics[height=2cm,width=7cm,keepaspectratio=true]{logo.png}\n \\include{page2}\n \\end{document}"
},
{
"path": "logo.png",
"url": "https://www.ytotech.com/images/ytotech_logo.png"
},
{
"path": "page2.tex",
"file": "VGhpcyBpcyB0aGUgc2Vjb25kIHBhZ2UsIHdoaWNoIHdhcyBwYXNzZWQgYXMgYSBiYXNlNjQgZW5jb2RlZCBmaWxl"
}
]
}' \
> hello_world.pdfIn this example the main document is passed as a plain-string (Json-encoded content resource mode), the logo image file with an url (url resource mode)
and the second LaTeX file as a base64 encoded string (file resource mode, which expects the file content as base64).
Also note how the first document is flag with the main property and how the dependencies relative paths are specified to reconstruct the file arborescence server-side for the compilation with multiple files to work.
With HTTPie:
http --multipart --download --output hello.pdf -v POST https://latex.ytotech.com/builds/sync \
compiler=pdflatex \
resources='[{"main": true, "content": "\\documentclass{article}\n \\begin{document}\n Hello World\n \\end{document}"}]'This multi-part API allows to send resource files to be compiled in a multipart HTTP query.
Use https://latex.ytotech.com/packages and https://latex.ytotech.com/fonts to see currently available packages and fonts.
You miss something? Open a PR for adding font(s) or Latex/CTAN packages!
kpym has created a CLI tool named lol for using LaTeX-on-HTTP:
lol -s ytotech -c xelatex main.tex imgs/*.pngTo install it, download the latest release for your platform and add it to your PATH.
For eg. on most Linux distributions this should work (considering $HOME/.local/bin is in your PATH):
wget https://github.com/kpym/lol/releases/download/v0.1.3/lol_0.1.3_Linux_64bit.tar.gz
tar -xf lol_0.1.3_Linux_64bit.tar.gz
chmod +x ./lol
mv ./lol ~/.local/bin
lol -hThis project is in an experimental phase and the API is very likely to change.
Compile a LaTeX document, waiting for the end of the build to get back the file.
Request
POST:/builds/sync
Payload (json)
{
"compiler": "lualatex",
"resources": [
{
"main": true,
"content": "\\documentclass{article}\n \\usepackage{graphicx}\n \\begin{document}\n Hello World\\\\\n \\includegraphics[height=2cm,width=7cm,keepaspectratio=true]{logo.png}\n \\include{page2}\n \\end{document}"
},
{
"path": "logo.png",
"url": "https://www.ytotech.com/images/ytotech_logo.png"
},
{
"path": "page2.tex",
"file": "VGhpcyBpcyB0aGUgc2Vjb25kIHBhZ2UsIHdoaWNoIHdhcyBwYXNzZWQgYXMgYSBiYXNlNjQgZW5jb2RlZCBmaWxl"
}
]
}compilerdefaults topdflatex. Available compilers:pdflatex,xelatex,lualatex,platex,uplatexandcontext.resourcesentries:- These are the files uploaded and to be compiled;
- There must be an entry for the main LaTeX document, tagged with the
main: truevalue; if there is only one entry, it is considered the main document; - Resource entries that are not the main document must be specified a
path, relative to main document; these files can then been referred in the LaTeX sources; - There are several resource content formats:
- String format, with
content(value must be encoded as a valid Json string); - Inline file format, with
file(value must be base64 encoded) - URL to a file, with
url(the resource pointed by the URL will be downloaded and decoded with UTF-8).
- String format, with
optionsproperties:options.bibliography.commanddefaults tobibtex. Available bibliography commands:bibtexandbiber.
Response
A PDF file if the compilation succeeds, else a Json payload with the error logs.
See information on TeXLive installation used in LaTeX compilations.
Request
GET:/texlive/information
Response
A Json payload with a TeXLive installation specification.
Sample
{
"texlive": {
"installation_path": "/usr/local/texlive",
"modules": [
{
"name": "TLConfig",
"value": "52745"
},
["..."]
],
"version": "2019"
},
"tlmgr": {
"revision": "52931",
"revision_date": "2019-11-27 00:04:18 +0100"
}
}Explore available fonts that can be used directly in LaTeX compilations.
Request
GET:/fonts
Response
A Json payload with a list of fonts.
Sample
{
"fonts": [
{
"family": "Courier New",
"name": "Courier New",
"styles": [
"Regular"
]
},
["..."]
}Explore installed LaTeX packages that can be used in compilations.
Request
GET:/packages
Response
A Json payload with a list of packages.
Sample
{
"packages": [
{
"installed": true,
"name": "12many",
"shortdesc": "Generalising mathematical index sets",
"url_ctan": "https://ctan.org/pkg/12many",
"url_info": "/packages/12many"
},
["..."]
}Get information on a LaTeX package, including whether it is installed or not.
Request
GET:/packages/<packageName>
Response
A Json payload with information on the package.
Sample for /packages/12many
{
"package": {
"cat-date": [
"2016-06-24T19:18:15+02:00"
],
"cat-license": "lppl",
"cat-topics": [
"maths"
],
"cat-version": "0.3",
"category": "Package",
"collection": "collection-mathscience",
"installed": true,
"longdesc": "In the discrete branches of mathematics and the computer sciences, it will only take some seconds before you're faced with a set like {1,...,m}. Some people write $1\\ldotp\\ldotp m$, others $\\{j:1\\leq j\\leq m\\}$, and the journal you're submitting to might want something else entirely. The 12many package provides an interface that makes changing from one to another a one-line change.",
"package": "12many",
"relocatable": false,
"revision": "15878",
"shortdesc": "Generalising mathematical index sets",
"sizes": {
"run": "5k"
},
"url_ctan": "https://ctan.org/pkg/12many"
}
}Prebuilt Docker images exist to run the service on your own:
- The Python+TexLive near complete LaTeX-on-HTTP image: yoant/latexonhttp-python
- The base TexLive image: yoant/docker-texlive
You can use the default docker-compose.yml:
docker-compose upThe service will be available on http://localhost:2345.
Inspired by:
- Overleaf and Sharelatex for the idea that LaTeX can be made a web-accessible tool
- ... and for their open-source cloud LaTeX compiling architectures (clsi-sharelatex and clsi-overlead)
- Latex-Online from aslushnikov for a CLI-oriented online LaTeX compiler
- mrzool for its great LaTeX templates and integration with Pandoc