This repository (abougouffa/dotfiles) contains my configuration files for Bash, Zsh, MinEmacs, Neovim, Alacritty and other Linux related stuff.
If you want to reuse some of these configurations, you will need to modify some directories and add some user specific information (usernames, passwords…).
This is the main configuration file, it contains the literal personal configuration for MinEmacs, and I use it to generate some other Linux configuration files (define aliases, environment variables, user tools, Git configuration…).
I’ve been using Linux exclusively since 2010, GNU Emacs was always installed on my machine, but I didn’t discover the real Emacs until 2020. In the beginning, I started my vanilla Emacs configuration from scratch, but after a while, it had become a real mess. As a new Emacs user, I didn’t understand in the beginning how to optimize my configuration and how to do things correctly, which resulted in a configuration that takes 30s to load.
I discovered then Spacemacs, which made things much easier, but it was a little slow, and just after, I found the awesome Doom Emacs, which helped me progress and learn more about Emacs and Lisp, but at some point, I faced multiple problems with Doom, so I started my own configuration framework, MinEmacs.
MinEmacs is intended to be a minimal configuration framework. In the beginning,
I planned to use only necessary packages. However, it is starting to grow to
respond to my daily needs.
This block will be tangled in the file bootstrap.sh, which will be used as a
script to conditionally install and configure some system features.
#!/bin/env bash
# NOTE: This file is generated from "config-literate.org".
# This shell script has been generated from the litterate Org configuration.
# It helps installing required tools (for Arch/Manjaro Linux) and tweak some
# system settings;;; early-config.el -*- coding: utf-8-unix; lexical-binding: t; -*-
;; NOTE: This file is generated from "config-literate.org".
;; MinEmacs specific stuff
(unless minemacs-verbose-p
(setq minemacs-msg-level 3))
;; Force loading lazy packages immediately, not in idle time
;; (setq minemacs-not-lazy t)
;; Enable full screen at startup
;; (if-let ((fullscreen (assq 'fullscreen default-frame-alist)))
;; (setcdr fullscreen 'fullboth)
;; (push '(fullscreen . fullboth) default-frame-alist))
;; Setup a `debug-on-message' to catch a wired message!
;; (setq debug-on-message "\\(?:error in process filter: \\(?:\\(?:mu4e-warn: \\)?\\[mu4e] No message at point\\)\\)")
;; (setq debug-on-message "Package cl is deprecated")
;; (setenv "MINEMACS_IGNORE_VERSION_CHECK" "1");;; modules.el -*- coding: utf-8-unix; lexical-binding: t; -*-
;; NOTE: This file is generated from "config-literate.org".
;; This file can be used to override `minemacs-modules'
(setq
;;; MinEmacs modules
minemacs-modules
'(me-god
me-completion
me-ai
me-calendar
me-checkers
me-daemon
me-debug
me-docs
me-editor
me-emacs-lisp
me-email
me-embedded
me-extra
me-files
me-fun
me-gtd
me-lifestyle
me-math
me-media
me-multi-cursors
me-natural-langs
me-notes
me-org
me-prog
me-project
me-robot
me-rss
me-search
me-services
me-tags
me-tools
me-tty
me-ui
me-vc
me-window)
;;; MinEmacs disabled packages
minemacs-disabled-packages
'(super-save gcmh));;; config.el -*- coding: utf-8-unix; lexical-binding: t; -*-
;; NOTE: This file is generated from "config-literate.org".
;; (with-eval-after-load 'tab-bar
;; (setq tab-bar-show t));; Personal info
(setq user-full-name "Abdelhak Bougouffa"
user-mail-address (rot13 "[email protected]"))(setq-default
;; Encrypt files to my self by default
epa-file-encrypt-to '("F808A020A3E1AC37"))This combo should speedup opening files:
(setq-default
;; Better support for files with long lines
bidi-paragraph-direction 'left-to-right
;; Speeds redisplay, may break paranthesis rendering for bidirectional files
bidi-inhibit-bpa t)(defvar +biblio-notes-path (expand-file-name "~/Research/bibliography/notes/"))
(defvar +biblio-styles-path (expand-file-name "~/Zotero/styles/"))
(defvar +biblio-storage-path (expand-file-name "~/Zotero/storage/"))
(defvar +biblio-libraries-path (expand-file-name "~/Zotero/library.bib"))
(setq org-directory "~/Dropbox/Org/"
source-directory "~/Softwares/aur/emacs-git/src/emacs-git/")(setq +binary-hexl-enable t
browse-url-chromium-program (or (executable-find "brave")
(executable-find "chromium")
(executable-find "chromium-browser"))
browse-url-chrome-program browse-url-chromium-program)(when (featurep 'me-lifestyle)
(+with-delayed-1!
;; Calendar settings (from `solar')
(setq calendar-latitude 48.86
calendar-longitude 2.35
calendar-location-name "Paris, FR"
calendar-time-display-form '(24-hours ":" minutes))
(awqat-display-prayer-time-mode 1)
(awqat-set-preset-french-muslims)))Automatically scan for projects under +project-scan-dir-paths at startup:
(+with-delayed-1!
(setq +project-scan-dir-paths
'("~/Research/papers/"
"~/Research/workspace/"
"~/Research/workspace-no/"
"~/Research/workspace-no/ez-wheel/swd-starter-kit-repo/"
"~/Projects/foss/packages/"
"~/Projects/foss/repos/"))
(+shutup!
(+project-scan-for-projects)))(setq minemacs-theme 'doom-one-light)(with-eval-after-load 'me-writing-mode
(setq +writing-mixed-pitch-enable nil
+writing-text-scale 2.0))The lexic package needs sdcv to be installed, it needs also some StarDict
dictionaries to be installed, see M-x lexic-dictionary-help. You can download
some dictionaries from:
(with-eval-after-load 'spell-fu
(+spell-fu-register-dictionaries! "en" "fr"))Set RSS news feeds
(with-eval-after-load 'elfeed
(setq elfeed-feeds
'(("https://arxiv.org/rss/cs.RO" robotics academic)
("https://interstices.info/feed" science academic)
("https://spectrum.ieee.org/rss/robotics/fulltext" robotics academic)
("https://spectrum.ieee.org/rss/aerospace/fulltext" academic aerospace)
("https://spectrum.ieee.org/rss/computing/fulltext" academic computing)
("https://spectrum.ieee.org/rss/blog/automaton/fulltext" academic automation robotics)
("https://www.technologyreview.com/feed" tech science)
("https://interrupt.memfault.com/feed.xml" embedded prog rust c cpp)
("https://itsfoss.com/feed" linux foss)
("https://lwn.net/headlines/rss" linux foss)
("https://linuxhandbook.com/feed" linux foss)
("https://www.omgubuntu.co.uk/feed" linux foss)
("https://this-week-in-rust.org/rss.xml" rust prog)
("https://planet.emacslife.com/atom.xml" emacs prog foss)
("https://developers.redhat.com/blog/feed" linux foss))))Configuring mu4e as email client needs three parts:
- Incoming mail configuration IMAP (using
mbsync) - Outgoing mail configuration SMTP (using
smtpmailormsmtp) - Email indexer and viewer (via
muandmu4e)
You will need to:
- Install
muandisync(sudo pacman -S mu isync) - Set up a proper configuration file for your accounts at
~/.mbsyncrc - Run
mu init --maildir=~/Maildir --my-address=user@host1 --my-address=user@host2 - Run
mbsync -c ~/.mbsyncrc -a - For sending mails from
mu4e, add a~/.authinfofile, file contains a line in this formatmachine MAIL.DOMAIN.TLD login USER port 587 password PASSWD - Encrypt the
~/.authinfofile using GPGgpg -c ~/.authinfoand delete the original unencrypted file.
I use a mbsyncrc file for multi-accounts, with some hacks for Gmail accounts (to
rename the [Gmail]/... folders). Here is an explained configuration example.
In the configuration file, there is a parameter named Pass which should be set
to the password in plain text. Most of the examples you can find online uses
this parameter, but in real life, nobody uses it, it is extremely unsafe to put
the password in plain text configuration file. Instead, mbsync configuration
file provides the alternative PassCmd parameter, which can be set to an
arbitrary shell command which gets the password for you. You can set it for
example to call the pass password manager to output the account password, or to
bw command (for Bitwarden users). For me, I’m using it with Emacs’
~/.authinfo.gpg, the PassCmd in my configuration uses GPG and awk to decrypt and
filter the file content to find the required account’s password. I set PassCmd
to something like this:
gpg -q --for-your-eyes-only --no-tty --logger-file /dev/null --batch -d ~/.authinfo.gpg | awk '/machine smtp\.googlemail\.com login username@gmail\.com/ {print $NF}'Remember the line format in the ~/.authinfo.gpg file:
machine smtp.googlemail.com login [email protected] port 587 password YOUR_P455w0rd
This PassCmd command above, decrypts the ~/.authinfo.gpg, passes it to awk to
search the line containing "machine smtp.googlemail.com login
[email protected]" and prints the last field (the last field $NF in the awk
command corresponds to the password, as you can see in the line format).
The whole ~/.mbsyncrc file should look like this:
# mbsync config file
# GLOBAL OPTIONS
BufferLimit 50mb # Global option: Default buffer size is 10M, too small for modern machines.
Sync All # Channels global: Sync everything "Pull Push New ReNew Delete Flags" (default option)
Create Both # Channels global: Automatically create missing mailboxes on both sides
Expunge Both # Channels global: Delete messages marked for deletion on both sides
CopyArrivalDate yes # Channels global: Propagate arrival time with the messages
# SECTION (IMAP4 Accounts)
IMAPAccount work # IMAP Account name
Host mail.host.ccc # The host to connect to
User [email protected] # Login user name
SSLVersions TLSv1.2 TLSv1.1 # Supported SSL versions
# Extract password from encrypted ~/.authinfo.gpg
# File format: "machine <SERVER> login <LOGIN> port <PORT> password <PASSWORD>"
# This uses sed to extract <PASSWORD> from line matching the account's <SERVER>
PassCmd "gpg2 -q --for-your-eyes-only --no-tty --logger-file /dev/null --batch -d ~/.authinfo.gpg | awk '/machine smtp.domain.tld/ {print $NF}'"
AuthMechs * # Authentication mechanisms
SSLType IMAPS # Protocol (STARTTLS/IMAPS)
CertificateFile /etc/ssl/certs/ca-certificates.crt
# END OF SECTION
# IMPORTANT NOTE: you need to keep the blank line after each section
# SECTION (IMAP Stores)
IMAPStore work-remote # Remote storage name
Account work # Associated account
# END OF SECTION
# SECTION (Maildir Stores)
MaildirStore work-local # Local storage (create directories with mkdir -p ~/Maildir/<ACCOUNT-NAME>)
Path ~/Maildir/work/ # The local store path
Inbox ~/Maildir/work/Inbox # Location of the INBOX
SubFolders Verbatim # Download all sub-folders
# END OF SECTION
# Connections specify links between remote and local folders
# they are specified using patterns, which match remote mail
# folders. Some commonly used patters include:
#
# - "*" to match everything
# - "!DIR" to exclude "DIR"
# - "DIR" to match DIR
#
# SECTION (Channels)
Channel work # Channel name
Far :work-remote: # Connect remote store
Near :work-local: # to the local one
Patterns "INBOX" "Drafts" "Sent" "Archives/*" "Spam" "Trash"
SyncState * # Save state in near side mailbox file ".mbsyncstate"
# END OF SECTION
# =================================================================================
IMAPAccount gmail
Host imap.gmail.com
User [email protected]
PassCmd "gpg2 -q --for-your-eyes-only --no-tty --logger-file /dev/null --batch -d ~/.authinfo.gpg | awk '/machine smtp.domain.tld/ {print $NF}'"
AuthMechs LOGIN
SSLType IMAPS
CertificateFile /etc/ssl/certs/ca-certificates.crt
IMAPStore gmail-remote
Account gmail
MaildirStore gmail-local
Path ~/Maildir/gmail/
Inbox ~/Maildir/gmail/Inbox
# For Gmail, I like to make multiple channels, one for each remote directory
# this is a trick to rename remote "[Gmail]/mailbox" to "mailbox"
Channel gmail-inbox
Far :gmail-remote:
Near :gmail-local:
Patterns "INBOX"
SyncState *
Channel gmail-trash
Far :gmail-remote:"[Gmail]/Trash"
Near :gmail-local:"Trash"
SyncState *
Channel gmail-drafts
Far :gmail-remote:"[Gmail]/Drafts"
Near :gmail-local:"Drafts"
SyncState *
Channel gmail-sent
Far :gmail-remote:"[Gmail]/Sent Mail"
Near :gmail-local:"Sent Mail"
SyncState *
Channel gmail-all
Far :gmail-remote:"[Gmail]/All Mail"
Near :gmail-local:"All Mail"
SyncState *
Channel gmail-starred
Far :gmail-remote:"[Gmail]/Starred"
Near :gmail-local:"Starred"
SyncState *
Channel gmail-spam
Far :gmail-remote:"[Gmail]/Spam"
Near :gmail-local:"Spam"
SyncState *
# GROUPS PUT TOGETHER CHANNELS, SO THAT WE CAN INVOKE
# MBSYNC ON A GROUP TO SYNC ALL CHANNELS
#
# FOR INSTANCE: "mbsync gmail" GETS MAIL FROM
# "gmail-inbox", "gmail-sent", and "gmail-trash"
#
# SECTION (Groups)
Group gmail
Channel gmail-inbox
Channel gmail-sent
Channel gmail-trash
Channel gmail-drafts
Channel gmail-all
Channel gmail-starred
Channel gmail-spam
# END OF SECTION
I was using the standard smtpmail to send mails; but recently, I’m getting
problems when sending mails. I passed a whole day trying to fix mail sending for
one of my accounts, at the end of the day, I got a working setup; BUT, sending
the first mail always ask me about password! I need to enter the password to be
able to send the mail, Emacs asks me then if I want to save it to
~/.authifo.gpg, when I confirm saving it, it got duplicated in the .authinfo.gpg
file.
This seems to be a bug; I also found somewhere that smtpmail is buggy, and that
msmtp seems to be a good alternative, so now I’m using a msmtp-based setup, and
it works like a charm!
For this, we will need an additional configuration file, ~/.msmtprc, I configure
it the same way as mbsync, specifying this time SMTP servers instead of IMAP
ones. I extract the passwords from ~/.authinfo.gpg using GPG and awk, the same
way we did in mbsync’s configuration.
The following is a sample file ~/.msmtprc.
# Set default values for all following accounts.
defaults
auth on
tls on
tls_starttls on
tls_trust_file /etc/ssl/certs/ca-certificates.crt
logfile ~/.msmtp.log
# Gmail
account gmail
auth plain
host smtp.googlemail.com
port 587
from [email protected]
user username
passwordeval "gpg -q --for-your-eyes-only --no-tty --logger-file /dev/null --batch -d ~/.authinfo.gpg | awk '/machine smtp.googlemail.com login .*@gmail.com/ {print $NF}'"
add_missing_date_header on
## Gmail - aliases
account alias-account : gmail
from [email protected]
account other-alias : gmail
from [email protected]
# Work
account work
auth on
host smtp.domaine.tld
port 587
from [email protected]
user username
passwordeval "gpg -q --for-your-eyes-only --no-tty --logger-file /dev/null --batch -d ~/.authinfo.gpg | awk '/machine smtp.domaine.tld/ {print $NF}'"
tls_nocertcheck # ignore TLS certificate errors
I configure my email accounts in a private file in private/mu4e-accounts.el,
which will be loaded after this common part:
;; To disable auto starting mu4e in background
(setq +mu4e-auto-start nil)
(with-eval-after-load 'mu4e
;; Custom files
(setq mail-personal-alias-file (concat minemacs-config-dir "private/mail-aliases.mailrc")
mu4e-icalendar-diary-file (concat org-directory "icalendar-diary.org"))
;; Add a unified inbox shortcut
(add-to-list
'mu4e-bookmarks
'(:name "Unified inbox" :query "maildir:/.*inbox/" :key ?i) t)
;; Add shortcut to view spam messages
(add-to-list
'mu4e-bookmarks
'(:name "Spams" :query "maildir:/.*\\(spam\\|junk\\).*/" :key ?s) t)
;; The `+mu4e-extras-ignore-spams-query' function is defined in
;; `me-mu4e-extras'.
(with-eval-after-load 'me-mu4e-extras
;; Add shortcut to view yesterday's messages
(add-to-list
'mu4e-bookmarks
`(:name "Yesterday's messages" :query ,(+mu4e-extras-ignore-spams-query "date:1d..today") :key ?y) t))
;; Load my accounts
(+load minemacs-config-dir "private/mu4e-accounts.el")
(+load minemacs-config-dir "private/mu4e-extra-commands.el"))The content of private/mu4e-accounts.el is something like:
;; An address to add automatically as BCC for all sent messages
(setq +mu4e-auto-bcc-address "Auto-BCC <[email protected]>")
;; Register multiple accounts using the `+mu4e-register-account' helper
(+mu4e-register-account
"Work account"
"my-work"
`(;; The main Email address for the account
(user-mail-address . "[email protected]")
;; The folders, as configured in your "~/.mbsyncrc" file
(mu4e-sent-folder . "/my-work/Sent")
(mu4e-drafts-folder . "/my-work/Drafts")
(mu4e-trash-folder . "/my-work/Trash")
(mu4e-refile-folder . "/my-work/Archive")
;; SMTP server settings (when using the "msmtp" based configuration, these
;; settings aren't required)
(smtpmail-smtp-server . "smtps.my-work.tld")
(smtpmail-smtp-service . 587)
;; If your Email have alises, put them to this list
(+mu4e-account-aliases . ("[email protected]"))
;; When `org-msg' is used, you can define templates for greeting and signature
(org-msg-greeting-fmt . "Hello%s,")
;; You can use the `+org-msg-make-signature' helper to generate a signature
(org-msg-signature . ,(+org-msg-make-signature
"Best regards," ; Closing phrase
"Firstname"
"Lastname"
;; The signatures, multiple lines
"/Cool R&D Engineer/"
"=+33 01 23 45 67 89="))
(message-signature . ,(+org-msg-make-signature
"Regards,"
"Firstname"
"Lastname"
"/Cool R&D Engineer/"
"=+33 01 23 45 67 89="))
;; Another account
(+mu4e-register-account
"Personal account"
"personal"
`((user-mail-address . "[email protected]")
(mu4e-sent-folder . "/personal/Sent")
(mu4e-drafts-folder . "/personal/Drafts")
(mu4e-trash-folder . "/personal/Trash")
(mu4e-refile-folder . "/personal/Archives")
(smtpmail-smtp-server . "smtp.personal-mail.tld")
(smtpmail-smtp-service . 587)
(+mu4e-account-aliases . ("[email protected]"
"[email protected]"))
(org-msg-greeting-fmt . "Hi%s,")
(org-msg-signature . ,(+org-msg-make-signature
"Regards,"
"My first name"
"My last name"))))(with-eval-after-load 'calfw-ical
(+load minemacs-config-dir "private/calfw-sources.el"))I like to use an MPD powered EMMS, so when I restart Emacs I do not lose my music.
;; Not sure if it is required!
(with-eval-after-load 'mpc
(setq mpc-host "localhost:6600"))I like to launch the music daemon mpd using Systemd, let’s define some commands
in Emacs to start/kill the server:
(defun +mpd-daemon-start ()
"Start MPD, connects to it and syncs the metadata cache."
(interactive)
(let ((mpd-daemon-running-p (+mpd-daemon-running-p)))
(unless mpd-daemon-running-p
;; Start the daemon if it is not already running.
(setq mpd-daemon-running-p (+systemd-start "mpd")))
(cond ((+mpd-daemon-running-p)
(+mpd-mpc-update)
(emms-player-mpd-connect)
(emms-cache-set-from-mpd-all)
(message "Connected to MPD!"))
(t
(warn "An error occured when trying to start Systemd mpd.service.")))))
(defun +mpd-daemon-stop ()
"Stops playback and kill the MPD daemon."
(interactive)
(emms-stop)
(+systemd-stop "mpd")
(message "MPD stopped!"))
(defun +mpd-daemon-running-p ()
"Check if the MPD service is running."
(+systemd-running-p "mpd"))
(defun +mpd-mpc-update ()
"Updates the MPD database synchronously."
(interactive)
(if (zerop (call-process "mpc" nil nil nil "update"))
(message "MPD database updated!")
(warn "An error occured when trying to update MPD database.")))Now, we configure EMMS to use MPD if it is present; otherwise, it uses whatever default backend EMMS is using.
(with-eval-after-load 'emms
;; EMMS basic configuration
(require 'emms-setup)
(when (executable-find "mpd")
(require 'emms-player-mpd))
(emms-all)
(emms-default-players)
(setq emms-source-file-default-directory "~/Music/"
;; Load cover images
emms-browser-covers 'emms-browser-cache-thumbnail-async
emms-seek-seconds 5)
(if MPD-P
;; If using MPD as backend
(setq emms-player-list '(emms-player-mpd)
emms-info-functions '(emms-info-mpd)
emms-player-mpd-server-name "localhost"
emms-player-mpd-server-port "6600"
emms-player-mpd-music-directory (expand-file-name "~/Music"))
;; Use whatever backend EMMS is using by default (VLC in my machine)
(setq emms-info-functions '(emms-info-tinytag))) ;; use Tinytag, or '(emms-info-exiftool) for Exiftool
;; Keyboard shortcuts
(global-set-key (kbd "<XF86AudioPrev>") 'emms-previous)
(global-set-key (kbd "<XF86AudioNext>") 'emms-next)
(global-set-key (kbd "<XF86AudioPlay>") 'emms-pause)
(global-set-key (kbd "<XF86AudioPause>") 'emms-pause)
(global-set-key (kbd "<XF86AudioStop>") 'emms-stop)
;; Try to start MPD or connect to it if it is already started.
(when MPD-P
(emms-player-set emms-player-mpd 'regex
(emms-player-simple-regexp
"m3u" "ogg" "flac" "mp3" "wav" "mod" "au" "aiff"))
(add-hook 'emms-playlist-cleared-hook 'emms-player-mpd-clear)
(+mpd-daemon-start))
;; Activate EMMS in mode line
(emms-mode-line 1)
;; More descriptive track lines in playlists
;; From: https://www.emacswiki.org/emacs/EMMS#h5o-15
(defun +better-emms-track-description (track)
"Return a somewhat nice track description."
(let ((artist (emms-track-get track 'info-artist))
(album (emms-track-get track 'info-album))
(tracknumber (emms-track-get track 'info-tracknumber))
(title (emms-track-get track 'info-title)))
(cond
((or artist title)
(concat
(if (> (length artist) 0) artist "Unknown artist") ": "
(if (> (length album) 0) album "Unknown album") " - "
(if (> (length tracknumber) 0) (format "%02d. " (string-to-number tracknumber)) "")
(if (> (length title) 0) title "Unknown title")))
(t
(emms-track-simple-description track)))))
(setq emms-track-description-function '+better-emms-track-description)
;; Manage notifications, inspired by:
;; https://www.emacswiki.org/emacs/EMMS#h5o-9
;; https://www.emacswiki.org/emacs/EMMS#h5o-11
(cond
;; Choose D-Bus to disseminate messages, if available.
((and (require 'dbus nil t) (dbus-ping :session "org.freedesktop.Notifications"))
(setq +emms-notifier-function '+notify-via-freedesktop-notifications)
(require 'notifications))
;; Try to make use of KNotify if D-Bus isn't present.
((and window-system (executable-find "kdialog"))
(setq +emms-notifier-function '+notify-via-kdialog))
;; Use the message system otherwise
(t (setq +emms-notifier-function '+notify-via-messages)))
(setq +emms-notification-icon "/usr/share/icons/Papirus/64x64/apps/enjoy-music-player.svg")
(defun +notify-via-kdialog (title msg icon)
"Send notification with TITLE, MSG, and ICON via `KDialog'."
(call-process "kdialog"
nil nil nil
"--title" title
"--passivepopup" msg "5"
"--icon" icon))
(defun +notify-via-freedesktop-notifications (title msg icon)
"Send notification with TITLE, MSG, and ICON via `D-Bus'."
(notifications-notify
:title title
:body msg
:app-icon icon
:urgency 'low))
(defun +notify-via-messages (title msg icon)
"Send notification with TITLE, MSG to message. ICON is ignored."
(message "%s %s" title msg))
(add-hook 'emms-player-started-hook
(lambda () (funcall +emms-notifier-function
"EMMS is now playing:"
(emms-track-description (emms-playlist-current-selected-track))
+emms-notification-icon))))(with-eval-after-load 'empv
(setq
;; Set the radio channels, you can get streams from https://www.radio-browser.info
empv-radio-channels
'(("El-Bahdja FM" . "http://webradio.tda.dz:8001/ElBahdja_64K.mp3")
("El-Chaabia" . "https://radio-dzair.net/proxy/chaabia?mp=/stream")
("Quran Radio" . "http://stream.radiojar.com/0tpy1h0kxtzuv")
("Algeria International" . "https://webradio.tda.dz/Internationale_64K.mp3")
("JOW Radio" . "https://str0.creacast.com/jowradio")
("France Iter" . "http://direct.franceinter.fr/live/franceinter-hifi.aac")
("France Info" . "http://direct.franceinfo.fr/live/franceinfo-hifi.aac")
("France Culture" . "http://icecast.radiofrance.fr/franceculture-hifi.aac")
("France Musique" . "http://icecast.radiofrance.fr/francemusique-hifi.aac")
("FIP" . "http://icecast.radiofrance.fr/fip-hifi.aac")
("Beur FM" . "http://broadcast.infomaniak.ch/beurfm-high.aac")
("Skyrock" . "http://icecast.skyrock.net/s/natio_mp3_128k"))))(use-package inspector
:straight (:host github :repo "mmontone/emacs-inspector")
:commands inspect-expression inspect-last-sexp)(with-eval-after-load 'tramp
(setq
;; Do not use a separate history file for tramp sessions (buggy!)
tramp-histfile-override nil
;; Use Bash as a default remote shell
tramp-default-remote-shell "/bin/bash"
;; Use bash for encoding and decoding commands on the local host
tramp-encoding-shell "/bin/bash"))(with-eval-after-load 'ros
(setq ros-workspaces
(list
(ros-dump-workspace
:tramp-prefix "/docker:ros@ros-machine:"
:workspace "~/ros_ws"
:extends '("/opt/ros/noetic/"))
(ros-dump-workspace
:tramp-prefix "/docker:ros@ros-machine:"
:workspace "~/ros2_ws"
:extends '("/opt/ros/foxy/")))))(with-eval-after-load 'org
(setq
;; Let's put our Org files here
org-directory "~/Dropbox/Org/"
;; Do not ask before tangling
org-confirm-babel-evaluate nil
;; The last level which is still exported as a headline
org-export-headline-levels 5
;; Default file for notes (for org-capture)
org-default-notes-file (concat org-directory "inbox.org")
+org-inbox-file (concat org-directory "inbox.org")
+org-projects-file (concat org-directory "projects.org")
;; Custom todo keyword faces
org-todo-keyword-faces
'(("IDEA" . (:foreground "goldenrod" :weight bold))
("NEXT" . (:foreground "IndianRed1" :weight bold))
("STRT" . (:foreground "OrangeRed" :weight bold))
("WAIT" . (:foreground "coral" :weight bold))
("KILL" . (:foreground "DarkGreen" :weight bold))
("PROJ" . (:foreground "LimeGreen" :weight bold))
("HOLD" . (:foreground "orange" :weight bold)))
;; Custom org-capture templates, see: https://orgmode.org/manual/Capture.html
org-capture-templates
`(("t" "Todo" entry (file+headline ,+org-inbox-file "Inbox")
"* TODO %?\n%i\n%a")
("i" "Idea" entry (file+headline ,+org-inbox-file "Ideas")
"* IDEA %?\n%T\n%i\n%a")
("p" "Project note" entry (file ,+org-projects-file)
"* %?\n%T\n%i\n%a")
("n" "Note" entry (file+headline ,+org-inbox-file "Notes")
"* NOTE %?\n%T\n%i\n%a")))
(setq org-tag-persistent-alist
'((:startgroup . nil)
("home" . ?h)
("research" . ?r)
("work" . ?w)
(:endgroup . nil)
(:startgroup . nil)
("tool" . ?o)
("dev" . ?d)
("report" . ?p)
(:endgroup . nil)
(:startgroup . nil)
("easy" . ?e)
("medium" . ?m)
("hard" . ?a)
(:endgroup . nil)
("urgent" . ?u)
("key" . ?k)
("bonus" . ?b)
("ignore" . ?i)
("noexport" . ?x)))
(setq org-tag-faces
'(("home" . (:foreground "goldenrod" :weight bold))
("research" . (:foreground "goldenrod" :weight bold))
("work" . (:foreground "goldenrod" :weight bold))
("tool" . (:foreground "IndianRed1" :weight bold))
("dev" . (:foreground "IndianRed1" :weight bold))
("report" . (:foreground "IndianRed1" :weight bold))
("urgent" . (:foreground "red" :weight bold))
("key" . (:foreground "red" :weight bold))
("easy" . (:foreground "green4" :weight bold))
("medium" . (:foreground "orange" :weight bold))
("hard" . (:foreground "red" :weight bold))
("bonus" . (:foreground "goldenrod" :weight bold))
("ignore" . (:foreground "Gray" :weight bold))
("noexport" . (:foreground "LimeGreen" :weight bold))))
;; stolen from https://github.com/yohan-pereira/.emacs#babel-config
;; (defun +org-confirm-babel-evaluate (lang body)
;; (not (string= lang "scheme"))) ;; Don't ask for scheme
;; (setq org-confirm-babel-evaluate #'+org-confirm-babel-evaluate)
(setq org-agenda-files (list +org-inbox-file
+org-projects-file
(concat org-directory "gcal-agenda.org"))
org-agenda-deadline-faces
'((1.001 . error)
(1.000 . org-warning)
(0.500 . org-upcoming-deadline)
(0.000 . org-upcoming-distant-deadline))
org-list-demote-modify-bullet
'(("+" . "-")
("-" . "+")
("*" . "+")
("1." . "a.")))
;; Needs to make a src_latex{\textsc{text}}?, with this hack you can write [[latex:textsc][Some text]].
(+shutup!
(org-add-link-type
"latex" nil
(lambda (path desc format)
(cond
((eq format 'html)
(format "<span class=\"%s\">%s</span>" path desc))
((eq format 'latex)
(format "{\\%s{%s}}" path desc))))))
(+setq-hook! org-mode
time-stamp-active t
time-stamp-format "%04Y-%02m-%02d"
time-stamp-start "#\\+lastmod:[ \t]*"
time-stamp-end "$")
(add-hook 'before-save-hook #'time-stamp))(with-eval-after-load 'ox-hugo
(setq org-hugo-auto-set-lastmod t))(with-eval-after-load 'ox-latex
(add-to-list 'org-latex-packages-alist '("svgnames" "xcolor")))(setq denote-directory "~/Dropbox/Org/notes/")
(with-eval-after-load 'recentf
(add-to-list 'recentf-exclude denote-directory))(with-eval-after-load 'oc
(setq org-cite-csl-styles-dir +biblio-styles-path
org-cite-global-bibliography (ensure-list +biblio-libraries-path)))(with-eval-after-load 'citar
(setq citar-library-paths (ensure-list +biblio-storage-path)
citar-notes-paths (ensure-list +biblio-notes-path)
citar-bibliography (ensure-list +biblio-libraries-path)))Org mode isn’t recognized as its own mime type by default, but that can easily
be changed with the following file. For system-wide changes try
/usr/share/mime/packages/org.xml.
<mime-info xmlns='http://www.freedesktop.org/standards/shared-mime-info'>
<mime-type type="text/org">
<comment>Emacs Org-mode File</comment>
<glob pattern="*.org"/>
<alias type="text/org"/>
</mime-type>
</mime-info>What’s nice is that Papirus now has an icon for text/org. One simply needs to
refresh their mime database:
update-mime-database ~/.local/share/mimeThen set Emacs as the default editor:
xdg-mime default emacs-client.desktop text/orgThe recommended method of registering a protocol is by registering a desktop application, which seems reasonable.
[Desktop Entry]
Name=Emacs Org-Protocol
Exec=emacsclient %u
Icon=/home/hacko/.doom.d/assets/org-mode.svg
Type=Application
Terminal=false
MimeType=x-scheme-handler/org-protocol
To associate org-protocol:// links with the desktop file:
xdg-mime default org-protocol.desktop x-scheme-handler/org-protocolAs specified in the official documentation, we would like to invoke the
org-protocol:// without confirmation. To do this, we need to add this
system-wide configuration.
unset INSTALL_CONFIRM
read -p "Do you want to set Chrome/Brave to show the 'Always open ...' checkbox, to be used with the 'org-protocol://' registration? [Y | N]: " INSTALL_CONFIRM
if [[ "$INSTALL_CONFIRM" == "Y" ]]
then
sudo mkdir -p /etc/opt/chrome/policies/managed/
sudo tee /etc/opt/chrome/policies/managed/external_protocol_dialog.json > /dev/null <<'EOF'
{
"ExternalProtocolDialogShowAlwaysOpenCheckbox": true
}
EOF
sudo chmod 644 /etc/opt/chrome/policies/managed/external_protocol_dialog.json
fiThen add a bookmarklet in your browser with this code:
javascript:location.href =
'org-protocol://roam-ref?template=r&ref='
+ encodeURIComponent(location.href)
+ '&title='
+ encodeURIComponent(document.title)
+ '&body='
+ encodeURIComponent(window.getSelection())[pull]
rebase = true
[init]
defaultBranch = main # there is no master!
[commit]
gpgsign = true
[format]
signoff = true
[color]
ui = auto
[filter "lfs"]
clean = git-lfs clean -- %f
smudge = git-lfs smudge -- %f
process = git-lfs filter-process
required = true
# Store passwords in-memory, ask every 24h (default 900s)
[credential]
helper = cache --timeout 86400
[url "ssh://[email protected]/"]
pushInsteadOf = https://github.com/Based on this gist and this article.
*.tex diff=tex
*.bib diff=bibtex
*.{c,h,c++,h++,cc,hh,cpp,hpp} diff=cpp
*.m diff=matlab
*.py diff=python
*.rb diff=ruby
*.php diff=php
*.pl diff=perl
*.{html,xhtml} diff=html
*.f diff=fortran
*.{el,lisp,scm,clj,cljc} diff=lisp
*.r diff=rlang
*.texi* diff=texinfo
*.org diff=org
*.rs diff=rust
*.odt diff=odt
*.odp diff=libreoffice
*.ods diff=libreoffice
*.doc diff=doc
*.xls diff=xls
*.ppt diff=ppt
*.docx diff=docx
*.xlsx diff=xlsx
*.pptx diff=pptx
*.rtf diff=rtf
*.{png,jpg,jpeg,gif} diff=exif
*.pdf diff=pdf
*.djvu diff=djvu
*.epub diff=pandoc
*.chm diff=tika
*.mhtml? diff=tika
*.{class,jar} diff=tika
*.{rar,7z,zip,apk} diff=tika
Then adding some regular expressions for it to ~/.config/git/config:
# ====== TEXT FORMATS ======
[diff "org"]
xfuncname = "^(\\*+ +.*|#\\+title:.*)$"
[diff "lisp"]
# https://protesilaos.com/codelog/2021-01-26-git-diff-hunk-elisp-org
xfuncname = "^(((;;;+ )|\\(|([ \t]+\\(((cl-|el-patch-)?def(un|var|macro|method|custom)|gb/))).*)$"
[diff "rlang"]
xfuncname = "^([a-zA-z.]+ <- function.*)$"
[diff "texinfo"]
# Taken from: git.savannah.gnu.org/gitweb/?p=coreutils.git;a=blob;f=.gitattributes;h=c3b2926c78c939d94358cc63d051a70d38cfea5d;hb=HEAD
xfuncname = "^@node[ \t][ \t]*\\([^,][^,]*\\)"
[diff "rust"]
xfuncname = "^[ \t]*(pub|)[ \t]*((fn|struct|enum|impl|trait|mod)[^;]*)$"
# ====== BINARY FORMATS ======And some tools to view diffs on binary files:
[diff "pdf"]
binary = true
textconv = sh -c 'pdftotext -layout "$0" -enc UTF-8 -nopgbrk -q -'
cachetextconv = true[diff "djvu"]
binary = true
textconv = djvutxt # yay -S djvulibre
cachetextconv = true[diff "odt"]
binary = true
textconv = odt2txt
# textconv = pandoc --standalone --from=odt --to=plain
cachetextconv = true[diff "doc"]
binary = true
# textconv = wvText
textconv = catdoc # yay -S catdoc
cachetextconv = true[diff "xls"]
binary = true
# textconv = in2csv
# textconv = xlscat -a UTF-8
# textconv = soffice --headless --convert-to csv
textconv = xls2csv # yay -S catdoc
cachetextconv = true[diff "ppt"]
binary = true
textconv = catppt # yay -S catdoc
cachetextconv = true[diff "docx"]
binary = true
# textconv = sh -c 'docx2txt.pl "$0" -'
textconv = pandoc --standalone --from=docx --to=plain
cachetextconv = true
[diff "epub"]
textconv = pandoc --standalone --from=epub --to=plain
binary = true
cachetextconv = true[diff "xlsx"]
binary = true
textconv = xlsx2csv # pip install xlsx2csv
# textconv = in2csv
# textconv = soffice --headless --convert-to csv
cachetextconv = true[diff "pptx"]
binary = true
# pip install --user pptx2md (currently not wotking with Python 3.10)
# textconv = sh -c 'pptx2md --disable_image --disable_wmf -i "$0" -o ~/.cache/git/presentation.md >/dev/null && cat ~/.cache/git/presentation.md'
# Alternative hack, convert PPTX to PPT, then use the catppt tool
textconv = sh -c 'soffice --headless --convert-to ppt --outdir /tmp "$0" && TMP_FILENAME=$(basename -- "$0") && catppt "/tmp/${TMP_FILENAME%.*}.ppt"'
cachetextconv = true
[diff "libreoffice"]
binary = true
textconv = soffice --cat
cachetextconv = true[diff "rtf"]
binary = true
textconv = unrtf --text # yay -S unrtf
cachetextconv = true[diff "tika"]
binary = true
textconv = tika --config=~/.local/share/tika/tika-conf.xml --text
cachetextconv = true[diff "exif"]
binary = true
textconv = exiftool # sudo apt install perl-image-exiftoolThis tool is taken from https://gist.github.com/nottrobin/5758221. It is
attributed to David Underhill. It is a script to permanently delete
files/folders from a Git repository. To use it, cd to your repository’s root,
then run the script with a list of paths you want to delete, e.g.,
git-prune-files path1 path2
#!/usr/bin/env bash
set -o errexit
if [ $# -eq 0 ]; then
echo "Usage: git prune-files <path1> [<path2> ...]" 1>&2
exit 0
fi
# make sure we're at the root of git repo
if [ ! -d .git ]; then
echo "Error: must run this script from the root of a git repository" 1>&2
exit 1
fi
# remove all paths passed as arguments from the history of the repo
files=$@
git filter-branch --index-filter "git rm -rf --cached --ignore-unmatch $files" HEAD
# remove the temporary history git-filter-branch otherwise leaves behind for a long time
rm -rf .git/refs/original/ && git reflog expire --all && git gc --aggressive --pruneOr, add an alias to the command to your Git configuration:
[alias]
prune-files = "git-prune-files"
WIP
#!/usr/bin/env bash
if [[ ! $# -eq 2 ]]; then
echo "Usage: git replace-email [email protected] [email protected] <new-name>"
fi
OLD_EMAIL="$1"
NEW_EMAIL="$2"
git filter-branch --env-filter '
OLD_EMAIL="[email protected]"
CORRECT_NAME="yourName"
CORRECT_EMAIL="yourEmail"
if [ "$GIT_COMMITTER_EMAIL" = "$OLD_EMAIL" ]
then
export GIT_COMMITTER_NAME="$CORRECT_NAME"
export GIT_COMMITTER_EMAIL="$CORRECT_EMAIL"
fi
if [ "$GIT_AUTHOR_EMAIL" = "$OLD_EMAIL" ]
then
export GIT_AUTHOR_NAME="$CORRECT_NAME"
export GIT_AUTHOR_EMAIL="$CORRECT_EMAIL"
fi
' --tag-name-filter cat -- --branches --tagsLet’s have git ignore <lang> to automatically generate .gitignore patterns for a
specific language.
[alias]
ignore = "!gi() { curl -sL https://www.gitignore.io/api/$@ ;}; gi"
Apache Tika is a content detection and analysis framework. It detects and extracts metadata and text from over a thousand different file types. We will be using the Tika App in command-line mode to show some meaningful diff information for some binary files.
First, let’s add a custom script to run tika-app:
#!/bin/sh
APACHE_TIKA_JAR="$HOME/.local/share/tika/tika-app.jar"
if [ -f "${APACHE_TIKA_JAR}" ]; then
exec java -Dfile.encoding=UTF-8 -jar "${APACHE_TIKA_JAR}" "$@" 2>/dev/null
else
echo "JAR file not found at ${APACHE_TIKA_JAR}"
fiAdd tika’s installation instructions to the bootstrap.sh file.
update_apache_tika () {
TIKA_JAR_PATH="$HOME/.local/share/tika"
if [ ! -d "${TIKA_JAR_PATH}" ]; then
mkdir -p "${TIKA_JAR_PATH}"
fi
TIKA_BASE_URL=https://archive.apache.org/dist/tika/
TIKA_JAR_LINK="${TIKA_JAR_PATH}/tika-app.jar"
echo -n "Checking for new Apache Tika App version... "
command -v pandoc >/dev/null || echo "Cannot check, pandoc is missing!"; return
# Get the lastest version
TIKA_VERSION=$(
curl -s "${TIKA_BASE_URL}" | # Get the page
pandoc -f html -t plain | # Convert HTML page to plain text.
awk '/([0-9]+\.)+[0-1]\// {print substr($1, 0, length($1)-1)}' | # Get the versions directories (pattern: X.X.X/)
sort -rV | # Sort versions, the newest first
head -n 1 # Get the first (newest) version
)
if [ -z "${TIKA_VERSION}" ]; then
echo "Failed, check your internet connection."
exit 1
fi
echo "Lastest version is ${TIKA_VERSION}"
TIKA_JAR="${TIKA_JAR_PATH}/tika-app-${TIKA_VERSION}.jar"
TIKA_JAR_URL="${TIKA_BASE_URL}${TIKA_VERSION}/tika-app-${TIKA_VERSION}.jar"
if [ ! -f "${TIKA_JAR}" ]; then
echo "New version available!"
unset INSTALL_CONFIRM
read -p "Do you want to download Apache Tika App v${TIKA_VERSION}? [Y | N]: " INSTALL_CONFIRM
if [[ "$INSTALL_CONFIRM" == "Y" ]]; then
curl -o "${TIKA_JAR}" "${TIKA_JAR_URL}" && echo "Apache Tika App v${TIKA_VERSION} downloaded successfully"
fi
else
echo "Apache Tika App is up-to-date, version ${TIKA_VERSION} already downloaded to '${TIKA_JAR}'"
fi
# Check the existance of the symbolic link
if [ -L "${TIKA_JAR_LINK}" ]; then
unlink "${TIKA_JAR_LINK}"
fi
# Create a symbolic link to the installed version
ln -s "${TIKA_JAR}" "${TIKA_JAR_LINK}"
}
update_apache_tikaWhen it detects that Tesseract is installed, Tika App will try to extract text
from some file types. For some reason, it tries to use Tesseract with some
compressed files like *.bz2, *.apk… etc. As a workaround, we disable this
feature by exporting an XML config file which will be used when launching the
Tika App (using --config=<tika-config.xml>).
<?xml version="1.0" encoding="UTF-8"?>
<properties>
<parsers>
<parser class="org.apache.tika.parser.DefaultParser">
<parser-exclude class="org.apache.tika.parser.ocr.TesseractOCRParser"/>
</parser>
</parsers>
</properties>Add auto-completion for jj.
if command -v jj &> /dev/null; then
source <(jj util completion bash)
fiautoload -Uz compinit
compinit
if command -v jj &> /dev/null; then
source <(jj util completion zsh)
fiA wrapper around emacsclient, stolen from tecosaur’s Emacs configuration.
- Accepting
stdinby putting it in a temporary file and immediately opening it. - Guessing that the
ttyis a good idea when$DISPLAYis unset (relevant with SSH sessions, among other things). - With a whiff of 24-bit color support, sets
TERMvariable to aterminfothat (probably) announces 24-bit color support. - Changes GUI
emacsclientinstances to be non-blocking by default (--no-wait), and instead take a flag to suppress this behavior (-w).
#!/usr/bin/env bash
force_tty=false
force_wait=false
stdin_mode=""
args=()
while :; do
case "$1" in
-t | -nw | --tty)
force_tty=true
shift
;;
-w | --wait)
force_wait=true
shift
;;
-m | --mode)
stdin_mode=" ($2-mode)"
shift 2
;;
-h | --help)
echo -e "\033[1mUsage: e [-t] [-m MODE] [OPTIONS] FILE [-]\033[0m
Emacs client convenience wrapper.
\033[1mOptions:\033[0m
\033[0;34m-h, --help\033[0m Show this message
\033[0;34m-t, -nw, --tty\033[0m Force terminal mode
\033[0;34m-w, --wait\033[0m Don't supply \033[0;34m--no-wait\033[0m to graphical emacsclient
\033[0;34m-\033[0m Take \033[0;33mstdin\033[0m (when last argument)
\033[0;34m-m MODE, --mode MODE\033[0m Mode to open \033[0;33mstdin\033[0m with
Run \033[0;32memacsclient --help\033[0m to see help for the emacsclient."
exit 0
;;
--*=*)
set -- "$@" "${1%%=*}" "${1#*=}"
shift
;;
*)
if [ "$#" = 0 ]; then
break
fi
args+=("$1")
shift
;;
esac
done
if [ ! "${#args[*]}" = 0 ] && [ "${args[-1]}" = "-" ]; then
unset 'args[-1]'
TMP="$(mktemp /tmp/emacsstdin-XXX)"
cat >"$TMP"
args+=(--eval "(let ((b (generate-new-buffer \"*stdin*\"))) (switch-to-buffer b) (insert-file-contents \"$TMP\") (delete-file \"$TMP\")${stdin_mode})")
fi
if [ -z "$DISPLAY" ] || $force_tty; then
# detect terminals with sneaky 24-bit support
if { [ "$COLORTERM" = truecolor ] || [ "$COLORTERM" = 24bit ]; } &&
[ "$(tput colors 2>/dev/null)" -lt 257 ]; then
if echo "$TERM" | grep -q "^\w\+-[0-9]"; then
termstub="${TERM%%-*}"
else
termstub="${TERM#*-}"
fi
if infocmp "$termstub-direct" >/dev/null 2>&1; then
TERM="$termstub-direct"
else
TERM="xterm-direct"
fi # should be fairly safe
fi
emacsclient --tty -create-frame --alternate-editor="$ALTERNATE_EDITOR" "${args[@]}"
else
if ! $force_wait; then
args+=(--no-wait)
fi
emacsclient -create-frame --alternate-editor="$ALTERNATE_EDITOR" "${args[@]}"
fiNow, to set an alias to use e with magit, and then for maximum laziness we can
set aliases for the terminal-forced variants.
# -*- mode: sh; -*-
# Aliases to run emacs+magit
alias magit='e --eval "(progn (magit-status) (delete-other-windows))"'
alias magitt='e -t --eval "(progn (magit-status) (delete-other-windows))"'
# Aliases to run emacs+mu4e
alias emu='e --eval "(progn (=mu4e) (delete-other-windows))"'
alias emut='e -t --eval "(progn (=mu4e) (delete-other-windows))"'And this to launch Emacs in terminal mode et, I use this as a default $EDITOR
#!/usr/bin/env bash
e -t "$@"And ev for use with $VISUAL:
#!/usr/bin/env bash
e -w "$@"export EDITOR="$HOME/.local/bin/et"
export VISUAL="$HOME/.local/bin/ev"Install/update the appimageupdatetool.AppImage tool:
update_appimageupdatetool () {
TOOL_NAME=appimageupdatetool
MACHINE_ARCH=$(uname -m)
APPIMAGE_UPDATE_TOOL_PATH="$HOME/.local/bin/${TOOL_NAME}"
APPIMAGE_UPDATE_TOOL_URL="https://github.com/AppImage/AppImageUpdate/releases/download/continuous/${TOOL_NAME}-${MACHINE_ARCH}.AppImage"
if [ -f "${APPIMAGE_UPDATE_TOOL_PATH}" ] && "$APPIMAGE_UPDATE_TOOL_PATH" -j "${APPIMAGE_UPDATE_TOOL_PATH}" 2&>/dev/null; then
echo "${TOOL_NAME} already up to date"
else
if [ -f "${APPIMAGE_UPDATE_TOOL_PATH}" ]; then
echo "Update available, downloading latest ${MACHINE_ARCH} version to ${APPIMAGE_UPDATE_TOOL_PATH}"
mv "${APPIMAGE_UPDATE_TOOL_PATH}" "${APPIMAGE_UPDATE_TOOL_PATH}.backup"
else
echo "${TOOL_NAME} not found, downloading latest ${MACHINE_ARCH} version to ${APPIMAGE_UPDATE_TOOL_PATH}"
fi
wget -O "${APPIMAGE_UPDATE_TOOL_PATH}" "${APPIMAGE_UPDATE_TOOL_URL}" && # 2&>/dev/null
echo "Downloaded ${TOOL_NAME}-${MACHINE_ARCH}.AppImage" &&
[ -f "${APPIMAGE_UPDATE_TOOL_PATH}.backup" ] &&
rm "${APPIMAGE_UPDATE_TOOL_PATH}.backup"
chmod a+x "${APPIMAGE_UPDATE_TOOL_PATH}"
fi
}
update_appimageupdatetoolPath to your oh-my-zsh installation.
# -*- mode: sh -*-
# When logging via Tramp it will look for patterns to detect if a shell is
# present. Fancy shell prompts aren't taken into account.
if [[ $TERM == "dumb" ]]; then
unsetopt zle
PS1='$ '
return
fi
export ZSH="$HOME/.oh-my-zsh"# Source extra commands
source "$HOME/.shell_extras"Set name of the theme to load, if set to "random", it will load a random theme
each time oh-my-zsh is loaded, in which case, to know which specific one was
loaded, run: echo $RANDOM_THEME See github.com/ohmyzsh/ohmyzsh/wiki/Themes.
# Typewritten customizations
TYPEWRITTEN_RELATIVE_PATH="adaptive"
TYPEWRITTEN_CURSOR="underscore"
ZSH_THEME="typewritten/typewritten"
# Set list of themes to pick from when loading at random
# Setting this variable when ZSH_THEME=random will cause zsh to load
# a theme from this variable instead of looking in $ZSH/themes/
# If set to an empty array, this variable will have no effect.
# ZSH_THEME_RANDOM_CANDIDATES=( "robbyrussell" "agnoster" )# Uncomment the following line to use case-sensitive completion.
# CASE_SENSITIVE="true"
# Uncomment the following line to use hyphen-insensitive completion.
# Case-sensitive completion must be off. _ and - will be interchangeable.
# HYPHEN_INSENSITIVE="true"
# Uncomment the following line to disable bi-weekly auto-update checks.
# DISABLE_AUTO_UPDATE="true"
# Uncomment the following line to automatically update without prompting.
DISABLE_UPDATE_PROMPT="true"
# Uncomment the following line to change how often to auto-update (in days).
export UPDATE_ZSH_DAYS=3
# Uncomment the following line if pasting URLs and other text is messed up.
# DISABLE_MAGIC_FUNCTIONS="true"
# Uncomment the following line to disable colors in ls.
# DISABLE_LS_COLORS="true"
# Uncomment the following line to disable auto-setting terminal title.
# DISABLE_AUTO_TITLE="true"
# Uncomment the following line to enable command auto-correction.
# ENABLE_CORRECTION="true"
# Uncomment the following line to display red dots whilst waiting for completion.
# COMPLETION_WAITING_DOTS="true"
# Uncomment the following line if you want to disable marking untracked files
# under VCS as dirty. This makes repository status check for large repositories
# much, much faster.
# DISABLE_UNTRACKED_FILES_DIRTY="true"
# Uncomment the following line if you want to change the command execution time
# stamp shown in the history command output.
# You can set one of the optional three formats:
# "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
# or set a custom format using the strftime function format specifications,
# see 'man strftime' for details.
# HIST_STAMPS="mm/dd/yyyy"# Would you like to use another custom folder than $ZSH/custom?
ZSH_CUSTOM=$HOME/.config/my_ohmyzsh_customizations
# Which plugins would you like to load?
# Standard plugins can be found in $ZSH/plugins/
# Custom plugins may be added to $ZSH_CUSTOM/plugins/
# Example format: plugins=(rails git textmate ruby lighthouse)
# Add wisely, as too many plugins slow down shell startup.
plugins=(
zsh-autosuggestions
zsh-navigation-tools
zsh-interactive-cd
archlinux
ssh-agent
sudo
docker
systemd
tmux
python
pip
rust
repo
cp
rsync
z
)source "$ZSH/oh-my-zsh.sh"# Aliases
alias zshconfig="vim $HOME/.zshrc"
alias ohmyzsh="ranger $ZSH"Path to your oh-my-bash installation.
# -*- mode: sh -*-
# When logging via Tramp it will look for patterns to detect if a shell is
# present. Fancy shell prompts aren't taken into account.
if [[ $TERM == "dumb" ]]; then
unsetopt zle
PS1='$ '
return
fi
# Enable the subsequent settings only in interactive sessions
case $- in
*i*) ;;
*) return;;
esac
# Path to your oh-my-bash installation.
export OSH="$HOME/.oh-my-bash"
# Which completions would you like to load? (completions can be found in ~/.oh-my-bash/completions/*)
# Custom completions may be added to ~/.oh-my-bash/custom/completions/
# Example format: completions=(ssh git bundler gem pip pip3)
# Add wisely, as too many completions slow down shell startup.
completions=(
git
composer
ssh
)
# Which aliases would you like to load? (aliases can be found in ~/.oh-my-bash/aliases/*)
# Custom aliases may be added to ~/.oh-my-bash/custom/aliases/
# Example format: aliases=(vagrant composer git-avh)
# Add wisely, as too many aliases slow down shell startup.
aliases=(
general
)
# Which plugins would you like to load? (plugins can be found in ~/.oh-my-bash/plugins/*)
# Custom plugins may be added to ~/.oh-my-bash/custom/plugins/
# Example format: plugins=(rails git textmate ruby lighthouse)
# Add wisely, as too many plugins slow down shell startup.
plugins=(
git
bashmarks
)
# Which plugins would you like to conditionally load? (plugins can be found in ~/.oh-my-bash/plugins/*)
# Custom plugins may be added to ~/.oh-my-bash/custom/plugins/
# Example format:
# if [ "$DISPLAY" ] || [ "$SSH" ]; then
# plugins+=(tmux-autoattach)
# fi
source "$OSH"/oh-my-bash.sh
# User configuration
# export MANPATH="/usr/local/man:$MANPATH"
# You may need to manually set your language environment
# export LANG=en_US.UTF-8
# Preferred editor for local and remote sessions
# if [[ -n $SSH_CONNECTION ]]; then
# export EDITOR='vim'
# else
# export EDITOR='mvim'
# fi
# Compilation flags
# export ARCHFLAGS="-arch x86_64"
# ssh
# export SSH_KEY_PATH="~/.ssh/rsa_id"
# Set personal aliases, overriding those provided by oh-my-bash libs,
# plugins, and themes. Aliases can be placed here, though oh-my-bash
# users are encouraged to define aliases within the OSH_CUSTOM folder.
# For a full list of active aliases, run `alias`.
#
# Example aliases
# alias bashconfig="mate ~/.bashrc"
# alias ohmybash="mate ~/.oh-my-bash"# Source extra commands
source "$HOME/.shell_extras"Set name of the theme to load. Optionally, if you set this to "random" it’ll
load a random theme each time that oh-my-bash is loaded.
OSH_THEME="font"# Uncomment the following line to use case-sensitive completion.
# OMB_CASE_SENSITIVE="true"
# Uncomment the following line to use hyphen-insensitive completion. Case
# sensitive completion must be off. _ and - will be interchangeable.
# OMB_HYPHEN_SENSITIVE="false"
# Uncomment the following line to disable bi-weekly auto-update checks.
# DISABLE_AUTO_UPDATE="true"
# Uncomment the following line to change how often to auto-update (in days).
# export UPDATE_OSH_DAYS=13
# Uncomment the following line to disable colors in ls.
# DISABLE_LS_COLORS="true"
# Uncomment the following line to disable auto-setting terminal title.
# DISABLE_AUTO_TITLE="true"
# Uncomment the following line to enable command auto-correction.
# ENABLE_CORRECTION="true"
# Uncomment the following line to display red dots whilst waiting for completion.
# COMPLETION_WAITING_DOTS="true"
# Uncomment the following line if you want to disable marking untracked files
# under VCS as dirty. This makes repository status check for large repositories
# much, much faster.
# DISABLE_UNTRACKED_FILES_DIRTY="true"
# Uncomment the following line if you don't want the repository to be considered dirty
# if there are untracked files.
# SCM_GIT_DISABLE_UNTRACKED_DIRTY="true"
# Uncomment the following line if you want to completely ignore the presence
# of untracked files in the repository.
# SCM_GIT_IGNORE_UNTRACKED="true"
# Uncomment the following line if you want to change the command execution time
# stamp shown in the history command output. One of the following values can
# be used to specify the timestamp format.
# * 'mm/dd/yyyy' # mm/dd/yyyy + time
# * 'dd.mm.yyyy' # dd.mm.yyyy + time
# * 'yyyy-mm-dd' # yyyy-mm-dd + time
# * '[mm/dd/yyyy]' # [mm/dd/yyyy] + [time] with colors
# * '[dd.mm.yyyy]' # [dd.mm.yyyy] + [time] with colors
# * '[yyyy-mm-dd]' # [yyyy-mm-dd] + [time] with colors
# If not set, the default value is 'yyyy-mm-dd'.
# HIST_STAMPS='yyyy-mm-dd'
# Uncomment the following line if you do not want OMB to overwrite the existing
# aliases by the default OMB aliases defined in lib/*.sh
# OMB_DEFAULT_ALIASES="check"
# Would you like to use another custom folder than $OSH/custom?
# OSH_CUSTOM=/path/to/new-custom-folder
# To disable the uses of "sudo" by oh-my-bash, please set "false" to
# this variable. The default behavior for the empty value is "true".
OMB_USE_SUDO=true
# To enable/disable display of Python virtualenv and condaenv
# OMB_PROMPT_SHOW_PYTHON_VENV=true # enable
# OMB_PROMPT_SHOW_PYTHON_VENV=false # disable# Which completions would you like to load? (completions can be found in ~/.oh-my-bash/completions/*)
# Custom completions may be added to ~/.oh-my-bash/custom/completions/
# Example format: completions=(ssh git bundler gem pip pip3)
# Add wisely, as too many completions slow down shell startup.
completions=(
git
composer
ssh
)
# Which aliases would you like to load? (aliases can be found in ~/.oh-my-bash/aliases/*)
# Custom aliases may be added to ~/.oh-my-bash/custom/aliases/
# Example format: aliases=(vagrant composer git-avh)
# Add wisely, as too many aliases slow down shell startup.
aliases=(
general
)
# Which plugins would you like to load? (plugins can be found in ~/.oh-my-bash/plugins/*)
# Custom plugins may be added to ~/.oh-my-bash/custom/plugins/
# Example format: plugins=(rails git textmate ruby lighthouse)
# Add wisely, as too many plugins slow down shell startup.
plugins=(
git
bashmarks
)
# Which plugins would you like to conditionally load? (plugins can be found in ~/.oh-my-bash/plugins/*)
# Custom plugins may be added to ~/.oh-my-bash/custom/plugins/
# Example format:
# if [ "$DISPLAY" ] || [ "$SSH" ]; then
# plugins+=(tmux-autoattach)
# fisource "$OSH/oh-my-bash.sh"Load private configuration when found:
[[ -f "$HOME/.shell_private" ]] && source "$HOME/.shell_private"# User configuration
# export MANPATH="/usr/local/man:$MANPATH"
# You may need to manually set your language environment
# export LANG=en_US.UTF-8
# Preferred editor for local and remote sessions
# if [[ -n $SSH_CONNECTION ]]; then
# export EDITOR='vim'
# else
# export EDITOR='mvim'
# fi
# Compilation flags
# export ARCHFLAGS="-arch x86_64"
# ssh
# export SSH_KEY_PATH="~/.ssh/rsa_id"
# Set personal aliases, overriding those provided by oh-my-bash libs,
# plugins, and themes. Aliases can be placed here, though oh-my-bash
# users are encouraged to define aliases within the OSH_CUSTOM folder.
# For a full list of active aliases, run `alias`.
#
# Example aliases
# alias bashconfig="mate ~/.bashrc"
# alias ohmybash="mate ~/.oh-my-bash"I like to define MacOS-like commands (pbcopy and pbpaste) to copy and paste in
terminal (from stdin, to stdout). The pbcopy and pbpaste are defined using
either xclip or xsel, you would need to install these tools, otherwise we wouldn’t
define the aliases.
# Define aliases to 'pbcopy' and 'pbpaste'
if command -v xclip &> /dev/null; then
# Define aliases using xclip
alias pbcopy='xclip -selection clipboard'
alias pbpaste='xclip -selection clipboard -o'
elif command -v xsel &> /dev/null; then
# Define aliases using xsel
alias pbcopy='xsel --clipboard --input'
alias pbpaste='xsel --clipboard --output'
fiDefine a netpaste command to paste to a Pastebin server.
alias netpaste='curl -F file=@- 0x0.st' # OR 'curl -F f:1=<- ix.io 'And then define gsuon and gsuoff aliases to run graphical apps from terminal
with root permissions, this requires xhost.
# To run GUI apps from terminal with root permissions
if command -v xhost &> /dev/null; then
alias gsuon='xhost si:localuser:root'
alias gsuoff='xhost -si:localuser:root'
fiUse Neovim instead of VIM to provide vi and vim commands.
# NeoVim
if command -v nvim &> /dev/null; then
alias vim="nvim"
alias vi="nvim"
fiAdd some aliases to work with the ESP-IDF framework.
if [[ -d "$HOME/Softwares/src/esp-idf/" ]]; then
alias esp-prepare-env='source $HOME/Softwares/src/esp-idf/export.sh'
alias esp-update='echo "Updating ESP-IDF framework..." && cd $HOME/src/esp-idf && git pull --all && echo "Updated successfully"'
else
alias esp-prepare-env='echo "esp-idf repo not found. You can clone the esp-idf repo using git clone https://github.com/espressif/esp-idf.git"'
alias esp-update=esp-prepare-env
fiDefine an alias to get weather information for my city:
alias wttrin='curl wttr.in/$WTTRIN_CITY'
alias wttrin2='curl v2.wttr.in/$WTTRIN_CITY'Enable Meta key and colors in minicom:
export MINICOM='--metakey --color=on'Define Rust sources path, and add packages installed from cargo to the PATH.
export RUST_SRC_PATH="$HOME/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src/"
export PATH="$PATH:$HOME/.cargo/bin"I don’t like Go creating stuff in my home directory, lets move the Go workspace
by setting the GOPATH environment variable.
# The default is $HOME/go
export GOPATH="$HOME/Projects/go"I’m using the AUR package clang-format-static-bin, which provide multiple
versions of Clang-format, I use it with some work projects requiring a specific
version of Clang-format.
[[ -d "/opt/clang-format-static" ]] && export PATH="$PATH:/opt/clang-format-static"Add my manually built libraries to CMake and PATH.
export CMAKE_PREFIX_PATH="$HOME/Softwares/src/install"
export PATH="$PATH:$HOME/Softwares/src/install/bin"Set NPM installation path to local:
if ! command -v nvm >/dev/null; then
unset INSTALL_CONFIRM
read -p "Do you want install nvm [Y | N]: " INSTALL_CONFIRM
if [[ "$INSTALL_CONFIRM" =~ "^[Yy]$" ]]; then
curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.5/install.sh | bash
fi
fiexport NVM_DIR="$([ -z "${XDG_CONFIG_HOME-}" ] && printf %s "${HOME}/.nvm" || printf %s "${XDG_CONFIG_HOME}/nvm")"
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh" # This loads nvm
[ -s "$NVM_DIR/bash_completion" ] && \. "$NVM_DIR/bash_completion" # This loads nvm bash_completionInstall and setup pyenv:
if ! command -v pyenv &>/dev/null; then
unset INSTALL_CONFIRM
read -p "Do you want install pyenv [Y | N]: " INSTALL_CONFIRM
if [[ "$INSTALL_CONFIRM" =~ "^[Yy]$" ]]; then
curl https://pyenv.run | bash
fi
fiexport PYENV_ROOT="$HOME/.pyenv"
export PATH="$PYENV_ROOT/bin:$PATH"
command -v pyenv &>/dev/null && eval "$(pyenv init -)"I like to use tmux by default, even on my local sessions, I like to start a tmux
in a default session on the first time I launch a terminal, and then, attach any
other terminal to this default session:
# If not running inside Emacs (via vterm/eshell...)
if [[ -z "${INSIDE_EMACS}" ]]; then
if command -v tmux &> /dev/null && [[ -z "${TMUX}" ]]; then
tmux attach -t default || tmux new -s default
fi
fiif ! command -v direnv &>/dev/null; then
unset INSTALL_CONFIRM
read -p "Do you want install direnv [Y | N]: " INSTALL_CONFIRM
if [[ "$INSTALL_CONFIRM" =~ "^[Yy]$" ]]; then
curl -sfL https://direnv.net/install.sh | bash
fi
ficommand -v direnv &>/dev/null && eval "$(direnv hook bash)"command -v direnv &>/dev/null && eval "$(direnv hook zsh)"command -v fzf &> /dev/null && eval "$(eval fzf --bash)"command -v fzf &> /dev/null && eval "$(eval fzf --zsh)"I’m currently experimenting both Nix and Guix as package managers to see which one fits my needs. I’m planning to move from Manjaro/Arch Linux to NixOS or Guix. Guix seems more robust, less hacky than NixOS and uses Guile Scheme for almost every aspect (the Nix language is definitely less powerful and non general purpose as Guile). However, the strict “libre” policy of Guix bothers me a bit, as well as the number of available packages for Guix compared to those available for Nix.
# if ! command -v nix &> /dev/null; then
# unset INSTALL_CONFIRM
# read -p "Do you want install Nix for all users? [Y | N]: " INSTALL_CONFIRM
# if [[ "$INSTALL_CONFIRM" == "Y" ]]; then
# sh <(curl -L https://nixos.org/nix/install) --daemon
# else
# read -p "Do you want install Nix for the current user only? [Y | N]: " INSTALL_CONFIRM
# if [[ "$INSTALL_CONFIRM" == "Y" ]]; then
# sh <(curl -L https://nixos.org/nix/install) --no-daemon
# fi
# fi
# fi# if ! command -v guix &>/dev/null; then
# unset INSTALL_CONFIRM
# read -p "Do you want install guix [Y | N]: " INSTALL_CONFIRM
# if [[ "$INSTALL_CONFIRM" =~ "^[Yy]$" ]]; then
# curl -sfL https://git.savannah.gnu.org/cgit/guix.git/plain/etc/guix-install.sh | sudo bash
# fi
# fi# # Automatically added by the Guix install script.
# if [ -n "$GUIX_ENVIRONMENT" ]; then
# if [[ $PS1 =~ (.*)"\\$" ]]; then
# PS1="${BASH_REMATCH[1]} [env]\\\$ "
# fi
# fi# # Automatically added by the Guix install script.
# if [ -n "$GUIX_ENVIRONMENT" ]; then
# if [[ $PS1 =~ (.*)"\\$" ]]; then
# PS1="${BASH_REMATCH[1]} [env]\\\$ "
# fi
# fiDefine some environment variables.
export PATH="${PATH}:${HOME}/.local/bin"Load my bitwarden-cli session, exported to BW_SESSION.
[[ -f "$HOME/.bitwarden-session" ]] && source "$HOME/.bitwarden-session"For Rust code base, the file $HOME/.rustfmt.toml contains the global format
settings, I like to set it to:
# Rust edition 2018
edition = "2018"
# Use Unix style newlines, with 2 spaces tabulation.
newline_style = "Unix"
tab_spaces = 2
hard_tabs = false
# Make one line functions in a single line
fn_single_line = true
# Format strings
format_strings = true
# Increase the max line width
max_width = 120
# Merge nested imports
merge_imports = true
# Enum and Struct alignement
enum_discrim_align_threshold = 20
struct_field_align_threshold = 20
# Reorder impl items: type > const > macros > methods.
reorder_impl_items = true
# Comments and documentation formating
wrap_comments = true
normalize_comments = true
normalize_doc_attributes = true
format_code_in_doc_comments = true
report_fixme = "Always"
todo = "Always"
#!/bin/sh -e
# This script mounts a user's confidential private folder
#
# Original by Michael Halcrow, IBM
# Extracted to a stand-alone script by Dustin Kirkland <[email protected]>
# Modified by: Abdelhak Bougouffa <[email protected]>
#
# This script:
# * interactively prompts for a user's wrapping passphrase (defaults to their
# login passphrase)
# * checks it for validity
# * unwraps a users mount passphrase with their supplied wrapping passphrase
# * inserts the mount passphrase into the keyring
# * and mounts a user's encrypted private folder
PRIVATE_DIR="Private"
PW_ATTEMPTS=3
MESSAGE=`gettext "Enter your login passphrase:"`
if [ -f $HOME/.ecryptfs/wrapping-independent ]; then
# use a wrapping passphrase different from the login passphrase
MESSAGE=`gettext "Enter your wrapping passphrase:"`
fi
WRAPPED_PASSPHRASE_FILE="$HOME/.ecryptfs/wrapped-passphrase"
MOUNT_PASSPHRASE_SIG_FILE="$HOME/.ecryptfs/$PRIVATE_DIR.sig"
# First, silently try to perform the mount, which would succeed if the appropriate
# key is available in the keyring
if /sbin/mount.ecryptfs_private >/dev/null 2>&1; then
exit 0
fi
# Otherwise, interactively prompt for the user's password
if [ -f "$WRAPPED_PASSPHRASE_FILE" -a -f "$MOUNT_PASSPHRASE_SIG_FILE" ]; then
tries=0
while [ $tries -lt $PW_ATTEMPTS ]; do
LOGINPASS=`zenity --password --title "eCryptFS: $MESSAGE"`
if [ $(wc -l < "$MOUNT_PASSPHRASE_SIG_FILE") = "1" ]; then
# No filename encryption; only insert fek
if printf "%s\0" "$LOGINPASS" | ecryptfs-unwrap-passphrase "$WRAPPED_PASSPHRASE_FILE" - | ecryptfs-add-passphrase -; then
break
else
zenity --error --title "eCryptfs" --text "Error: Your passphrase is incorrect"
tries=$(($tries + 1))
continue
fi
else
if printf "%s\0" "$LOGINPASS" | ecryptfs-insert-wrapped-passphrase-into-keyring "$WRAPPED_PASSPHRASE_FILE" -; then
break
else
zenity --error --title "eCryptfs" --text "Error: Your passphrase is incorrect"
tries=$(($tries + 1))
continue
fi
fi
done
if [ $tries -ge $PW_ATTEMPTS ]; then
zenity --error --title "eCryptfs" --text "Too many incorrect password attempts, exiting"
exit 1
fi
/sbin/mount.ecryptfs_private
else
zenity --error --title "eCryptfs" --text "Encrypted private directory is not setup properly"
exit 1
fi
if grep -qs "$HOME/.Private $PWD ecryptfs " /proc/mounts 2>/dev/null; then
zenity --info --title "eCryptfs" --text "Your private directory has been mounted."
fi
xdg-open "$HOME/Private"
exit 0[Desktop Entry]
Type=Application
Version=1.0
Name=eCryptfs Unlock Private Directory
Icon=unlock
Exec=/home/hacko/.ecryptfs/ecryptfs-mount-private-gui
Terminal=False
I like to disable the initial message (containing copyright info and other
stuff), the right way to do this is either by starting gdb with -q option, or
(since GDB v11 I think), by setting src_gdb-script{set startup-quietly} in
~/.gdbearlyinit.
# GDB early init file
# Abdelhak Bougouffa (c) 2022
# Disable showing the initial message
set startup-quietly
GDB loads $HOME/.gdbinit at startup, I like to define some default options in
this file, this is a WIP, but it won’t evolve too much, as it is recommended to
keep the .gdbinit clean and simple. For the moment, it does just enable pretty
printing, and defines the c and n commands to wrap continue and next with a post
refresh, which is helpful with the annoying TUI when the program outputs to the
standard output.
# GDB init file
# Abdelhak Bougouffa (c) 2022
# Save history
set history save on
set history filename ~/.gdb_history
set history remove-duplicates 2048
# When debugging my apps, debug information of system libraries
# aren't that important
set debuginfod enabled off
# Set pretty print
set print pretty on
# I hate stepping into system libraries when I'm debugging my
# crappy stuff, so lets add system headers to skipped files
skip pending on
python
import os
# Add paths here, they will be explored recursivly
LIB_PATHS = ["/usr/include" "/usr/local/include"]
for lib_path in LIB_PATHS:
for root, dirs, files in os.walk(lib_path):
for file in files:
cmd = f"skip file {os.path.join(root, file)}"
gdb.execute(cmd, True, to_string=True)
end
skip enable
# This fixes the annoying ncurses TUI gliches and saves typing C-l each time to refresh the screen
define cc
continue
refresh
end
define nn
next
refresh
end
I add this to my ~/.gnupg/gpg-agent.conf, to set the time-to-live to one day.
# Do not ask me about entered passwords for 24h (during the same session)
default-cache-ttl 86400
max-cache-ttl 86400
# As I'm using KDE, use Qt based pinentry tool instead of default GTK+
pinentry-program /usr/bin/pinentry-qt
# Allow pinentry in Emacs minibuffer (combined with epg-pinentry-mode)
allow-loopback-pinentry
allow-emacs-pinentry
This creates a script named ocrthis that can be bound to OS shortcut. When
triggered:
- it shows a selection tool to take a partial screenshot,
- it runs
tesseractto extract the text, - and then, it copies it to clipboard.
#!/bin/bash
IMG=$(mktemp -u --suffix=".png")
scrot -s "$IMG" -q 100
mogrify -modulate 100,0 -resize 400% "$IMG"
tesseract "$IMG" - -l eng 2> /dev/null | xsel -ibThis script is called at system startup.
#!/bin/bash
WEEK_DAY=$(date +%u)
HOUR=$(date +%H)
SLACK=$(which slack)
if [[ "$WEEK_DAY" != "6" ]] && [[ "$WEEK_DAY" != "7" ]] && [[ "$HOUR" -gt 7 ]] && [[ "$HOUR" -lt 18 ]]; then
$SLACK -u %U
else
echo "It is not work time!"
fiHere, we install Arch packages
check_and_install_pkg() {
PKG_NAME="$1"
if ! pacman -Qiq "${PKG_NAME}" &>/dev/null; then
echo "Package ${PKG_NAME} is missing, installing it using yay"
yay -S --noconfirm "${PKG_NAME}"
fi
}
PKGS_LIST=(
# System tools
git repo ripgrep fd gnupg fzf the_silver_searcher xsel xorg-xhost
neovim ecryptfs-utils libvterm binutils
# Fonts
ttf-martian-mono ttf-ttf-ibm-plex ttf-fira-code ttf-roboto-mono ttf-overpass
ttf-lato ttf-input ttf-cascadia-code ttf-jetbrains-mono
ttf-fantasque-sans-mono ttc-iosevka ttc-iosevka-slab ttc-iosevka-curly
ttc-iosevka-curly-slab
# Programming tools
ccls cppcheck clang gcc gcc-m2 gcc-rust gdb lldb valgrind rr openocd vls vlang
rustup semgrep-bin pylyzer-git zig
# Lisp/Scheme
sbcl cmucl clisp chez-scheme mit-scheme chibi-scheme chicken gcl
# Math
maxima octave scilab-bin graphviz jupyterlab jupyter-notebook r
# Media
mpc mpv mpd vlc yt-dlp poppler ffmpegthumbnailer mediainfo imagemagick
# Email
mu isync msmtp
# Documents
djvulibre catdoc unrtf perl-image-exiftool wkhtmltopdf pandoc hugo inkscape
imagemagick
# Natural languages
aspell aspell-en aspell-fr aspell-ar grammalecte language-tool ltex-ls-bin sdcv
# Apps
brave zotero
)
if command -v pacman >/dev/null; then
unset INSTALL_CONFIRM
read -p "Do you want to Arch Linux packages? [Y | N]: " INSTALL_CONFIRM
if [[ "$INSTALL_CONFIRM" =~ "^[Yy]$" ]]; then
for PKG in "${PKGS_LIST[@]}"; do
check_and_install_pkg "$PKG"
done
fi
else
echo "Not on Arch Linux or Manjaro"
fiOn KDE, there is a good support for HiDPI displays, however, I faced annoying
small icons in some contexts (for example, a right click on desktop). This can
be fixed by setting PLASMA_USE_QT_SCALING=1 before starting KDE Plasma. KDE
sources the files with .sh extension found on ~/.config/plasma-workspace/env, so
let’s create ours.
export PLASMA_USE_QT_SCALING=1