BX-bot

What is BX-bot?

BX-bot (Bex) is a simple Bitcoin trading bot written in Java for trading on cryptocurrency exchanges.

The project contains the basic infrastructure to trade on a cryptocurrency exchange... except for the trading strategies - you'll need to write those yourself! A simple example of a scalping strategy is included to get you started with the Trading API - take a look here for more ideas.

Exchange Adapters for using Bitstamp, Bitfinex, OKCoin, Huobi, GDAX, itBit, Kraken, and Gemini are included. Feel free to improve these or contribute new adapters to the project; that would be shiny!

The Trading API provides support for limit orders traded at the spot price; it does not support futures or margin trading.

Warning: Trading Bitcoin carries significant financial risk; you could lose money. This software is provided 'as is' and released under the MIT license.

Architecture

• Trading Engine - the execution unit. It provides a framework for integrating Exchange Adapters and executing Trading Strategies.
• Exchange Adapters - the data stream unit. They provide access to a given exchange.
• Trading Strategies - the decision or strategy unit. This is where the trading decisions happen.
• Trading API - Trading Strategies use this API to make trades. Exchange Adapters implement this to provide access to a given exchange.
• Strategy API - Trading Strategies implement this so the Trading Engine can execute them.

Trading Strategies and Exchange Adapters are injected by the Trading Engine on startup. The bot uses a crude XML based dependency injection framework to achieve this; the long term goal is to convert it into a fully configurable Spring Boot app.

The bot was designed to fail hard and fast if any unexpected errors occur in the Exchange Adapters or Trading Strategies: it will log the error, send an email alert (if configured), and then shut down.

Installation Guide

The Docker way

If you want to just play around with the ExampleScalpingStrategy and evaluate the bot, Docker is the way to go.

1. Install Docker on the machine you want to run the bot.
2. Fetch the BX-bot image from Docker Hub: docker pull gazbert/bxbot:x.x.x - replace x.x.x with the Release version of the bot you want to run, e.g. docker pull gazbert/bxbot:0.8.4
3. Run the Docker container: docker container run --name bxbot-x.x.x -it gazbert/bxbot:x.x.x bash
4. Change into the bot's directory: cd bxbot*
5. Configure the bot as required - see the main Configuration section. The bot's default configuration uses the ExampleScalpingStrategy, but you'll probably want to code your own! The TestExchangeAdapter is configured by default - it makes public API calls to Bitstamp, but stubs out the private API (order management) calls; it's good for testing your initial setup without actually sending orders to the exchange.
6. Usage: ./bxbot.sh [start|stop|status]
7. You can detach from the container and leave the bot running using the CTRL-p CTRL-q key sequence.
8. To re-attach to the Docker container, run docker container ls to get the CONTAINER ID. Then run: docker container attach <CONTAINER ID>

A Docker image for each release is available on Docker Hub.

The manual way

The Releases page has the stable releases, or you can grab the latest code from the head of the master branch.

The bot runs on Linux, macOS, and Windows. The Windows bxbot.bat script for starting/stopping the bot is elementary and needs further development.

BX-bot requires a Java 8 JDK (openjdk-8-jdk or Oracle JDK 8) to be installed on the machine you are going to use to build the bot.

You can use Maven or Gradle to build the bot and distribution artifact. The instructions below are for Linux and macOS, but equivalent Windows scripts are included.

Maven

1. Download the latest release. Unzip the bot.
2. If you plan on using your own Trading Strategies/Exchange Adapters packaged in separate jar files, you'll need to add the dependency in the bxbot-app/pom.xml - see the commented out dependency examples inside it.
3. From the project root, run ./mvnw clean assembly:assembly to produce the distribution artifacts bxbot-app-<version>-dist.tar.gz and bxbot-app-<version>-dist.zip in the ./target folder.
4. Copy either the bxbot-app-<version>-dist.tar.gz or the bxbot-app-<version>-dist.zip onto the machine you want to run the bot and unzip it someplace.
5. Configure the bot as required - see the main Configuration section. The bot's default configuration uses the ExampleScalpingStrategy, but you'll probably want to code your own! The TestExchangeAdapter is configured by default - it makes public API calls to Bitstamp, but stubs out the private API (order management) calls; it's good for testing your initial setup without actually sending orders to the exchange.
6. Usage: ./bxbot.sh [start|stop|status]

Gradle

1. Download the latest release. Unzip the bot.
2. If you plan on using your own Trading Strategies/Exchange Adapters packaged in separate jar files, you'll need to add the dependency in the bxbot-app/build.gradle - see the commented out dependency examples inside it.
3. From the project root, run ./gradlew clean build to build the bot.
4. Then run ./gradlew buildTarGzipDist or ./gradlew buildZipDist to build the distribution artifact: either bxbot-app-<version>.tar.gz or bxbot-app-<version>.zip respectively. It will be placed in the ./build/distributions folder.
5. Copy the artifact onto the machine you want to run the bot and unzip it someplace.
6. Configure the bot as required - see the main Configuration section. The bot's default configuration uses the ExampleScalpingStrategy, but you'll probably want to code your own! The TestExchangeAdapter is configured by default - it makes public API calls to Bitstamp, but stubs out the private API (order management) calls; it's good for testing your initial setup without actually sending orders to the exchange.
7. Usage: ./bxbot.sh [start|stop|status]

NOTE: You only need a Java 8 JRE (openjdk-8-jre or Oracle JRE 8) to be installed on the machine you want to run the bot.

Build Guide

BX-bot requires a Java 8 JDK (openjdk-8-jdk or Oracle JDK 8) for the development environment.

You can use Maven or Gradle to build the bot and pull down the dependencies; BX-bot depends on log4j, JavaMail, Google Gson, Google Guava, and Spring Boot. See the Maven pom.xml for details.

The instructions below are for Linux and macOS, but equivalent Windows scripts are included.

Maven

1. Clone the repo locally (master branch).
2. From the project root, run ./mvnw clean install. If you want to run the exchange integration tests, use ./mvnw clean install -Pint. To execute both unit and integration tests, use ./mvnw clean install -Pall.
3. Take a look at the Javadoc in the ./target/apidocs folders of the bxbot-trading-api, bxbot-strategy-api, and bxbot-exchange-api modules after the build completes.

Gradle

1. Clone the repo locally (master branch).
2. From the project root, run ./gradlew build. If you want to run the exchange integration tests, use ./gradlew integrationTests. To execute both unit and integration tests, use ./gradlew build integrationTests.
3. To generate the Javadoc, run ./gradlew javadoc and look in the ./build/docs/javadoc folders of the bxbot-trading-api, bxbot-strategy-api, and bxbot-exchange-api modules.

Issue & Change Management

Issues and new features are managed using the project Issue Tracker - submit bugs here.

You are welcome to take on new features or fix bugs! See here for how to get involved.

For help and general questions about BX-bot, check out the Gitter channel.

Testing

The bot has undergone basic unit testing on a best-effort basis.

There is a continuous integration build running on Travis CI.

The latest stable build can always be found on the Releases page. The SNAPSHOT builds on master are active development builds, but the tests should always pass and the bot should always be deployable.

User Guide

Configuration

The bot provides a simple plugin framework for:

• Exchanges to integrate with.
• Markets to trade on.
• Trading Strategies to execute.

It uses XML configuration files. These live in the config folder. Any config changes require a restart of the bot to take effect.

Sample configurations for running on different exchanges can be found in the config/samplesfolder.

Engine

The engine.xml file is used to configure the Trading Engine.

<engine>
    <bot-id>my-bitstamp-bot_1</bot-id>
    <bot-name>Bitstamp Bot</bot-name>
    <emergency-stop-currency>BTC</emergency-stop-currency>
    <emergency-stop-balance>1.0</emergency-stop-balance>
    <trade-cycle-interval>20</trade-cycle-interval>
</engine>

All elements are mandatory.

• The <bot-id> value is a unique identifier for the bot. This is used by BX-bot UI Server (work in progress) to identify and route configuration updates and commands to the bot. Value must be an alphanumeric string. Underscores and dashes are also permitted.

• The <bot-name> is a friendly name for the bot. The is used by BX-bot UI (work in progress) to display the bot's name. Value must be an alphanumeric string. Spaces are allowed.

• The <emergency-stop-currency> value must be set to prevent catastrophic loss on the exchange. This is normally the currency you intend to hold a long position in. It should be set to the currency short code for the wallet, e.g. BTC, LTC, USD. This value can be case sensitive for some exchanges - check the Exchange Adapter documentation.

• The <emergency-stop-balance> value must be set to prevent catastrophic loss on the exchange. The Trading Engine checks this value at the start of every trade cycle: if your <emergency-stop-currency> wallet balance on the exchange drops below this value, the Trading Engine will log it, send an Email Alert (if configured) and then shut down. If you set this value to 0, the bot will bypass the check - be careful.

• The <trade-cycle-interval> value is the interval in seconds that the Trading Engine will wait/sleep before executing each trade cycle. The minimum value is 1 second. Some exchanges allow you to hit them harder than others. However, while their API documentation might say one thing, the reality is you might get socket timeouts and 5xx responses if you hit it too hard. You'll need to experiment with the trade cycle interval for different exchanges.

Exchange Adapters

You specify the Exchange Adapter you want BX-bot to use in the exchange.xml file.

BX-bot only supports 1 Exchange Adapter per bot, but you could have multiple bots running on the same exchange.

<exchange>
    <name>Bitstamp</name>
    <adapter>com.gazbert.bxbot.exchanges.BitstampExchangeAdapter</adapter>
    <authentication-config>
        <config-item>
            <name>client-id</name>
            <value>your-client-id</value>
        </config-item>    
        <config-item>
            <name>key</name>
            <value>your-api-key</value>
        </config-item>
        <config-item>
            <name>secret</name>
            <value>your-secret-key</value>
        </config-item>
    </authentication-config>
    <network-config>
        <connection-timeout>30</connection-timeout>
        <non-fatal-error-codes>
            <code>502</code>
            <code>503</code>
            <code>520</code>
            <code>522</code>
            <code>525</code>            
        </non-fatal-error-codes>
        <non-fatal-error-messages>
            <message>Connection reset</message>
            <message>Connection refused</message>
            <message>Remote host closed connection during handshake</message>
            <message>Unexpected end of file from server</message>           
        </non-fatal-error-messages>
    </network-config>
    <optional-config>
        <config-item>
            <name>not-needed-on-bitstamp-1</name>
            <value>here for illustration purposes only</value>
        </config-item>
        <config-item>
            <name>not-needed-on-bitstamp-2</name>
            <value>here for illustration purposes only</value>
        </config-item>
    </optional-config>
</exchange>

All elements are mandatory unless stated otherwise.

• The <name> value is a friendly name for the Exchange. It is used in log statements and by BX-bot UI (work in progress) to display the Exchange's name. Value must be an alphanumeric string. Spaces are allowed.

• For the <adapter> value, you must specify the fully qualified name of the Exchange Adapter class for the Trading Engine to inject on startup. The class must be on the runtime classpath. See the How do I write my own Exchange Adapter? section for more details.

• The <authentication-config> section is optional. If present, at least 1 <config-item> must be set - these are repeating key/value pairs. This section is used by the inbuilt Exchange Adapters to configure their exchange trading API credentials - see the sample exchange.xml config files for details.

• The <network-config> section is optional. If present, the <connection-timeout>, <non-fatal-error-codes>, and <non-fatal-error-messages> sections must be set. This section is used by the inbuilt Exchange Adapters to set their network configuration as detailed below:

  • The <connection-timeout> is the timeout value that the exchange adapter will wait on socket connect/socket read when communicating with the exchange. Once this threshold has been breached, the exchange adapter will give up and throw an ExchangeNetworkException. The sample Exchange Adapters are single threaded: if a request gets blocked, it will block all subsequent requests from getting to the exchange. This timeout value prevents an indefinite block.

  • The <non-fatal-error-codes> section contains a list of HTTP status codes that will trigger the adapter to throw a non-fatal ExchangeNetworkException. This allows the bot to recover from temporary network issues. See the sample exchange.xml config files for status codes to use.

  • The <non-fatal-error-messages> section contains a list of java.io Exception message content that will trigger the adapter to throw a non-fatal ExchangeNetworkException. This allows the bot to recover from temporary network issues. See the sample exchange.xml config files for messages to use.

• The <optional-config> section is optional. It is not needed for Bitstamp, but shown above for illustration purposes. If present, at least 1 <config-item> must be set - these are repeating key/value String pairs. This section is used by the inbuilt Exchange Adapters to set any additional config, e.g. buy/sell fees.

Markets

You specify which markets you want to trade on in the markets.xml file.

<markets>      
    <market>
        <id>btcusd</id>    
        <name>BTC/USD</name>        
        <base-currency>BTC</base-currency>
        <counter-currency>USD</counter-currency>
        <enabled>true</enabled>
        <trading-strategy-id>scalping-strategy</trading-strategy-id>
    </market>
    <market>
        <id>ltcusd</id>
        <name>LTC/BTC</name>
        <base-currency>LTC</base-currency>
        <counter-currency>BTC</counter-currency>
        <enabled>false</enabled>
        <trading-strategy-id>scalping-strategy</trading-strategy-id>
    </market>        
</markets>

All elements are mandatory unless stated otherwise.

• The <id> value is the market id as defined on the exchange. E.g. the BTC/USD market id is btcusd on Bitstamp - see currency_pair values.

• The <name> value is a friendly name for the market. The is used in the logs and by BX-bot UI (work in progress) to display the market's name. Value must be an alphanumeric string.

• The <base-currency> value is the currency short code for the base currency in the currency pair. When you buy or sell a currency pair, you are performing that action on the base currency. The base currency is the commodity you are buying or selling. E.g. in a BTC/USD market, the first currency (BTC) is the base currency and the second currency (USD) is the counter currency.

• The <counter-currency> value is the currency short code for the counter currency in the currency pair. This is also known as the quote currency.

• The <enabled> value allows you to toggle trading on the market. Remember, config changes are only applied on startup.

• The <trading-strategy-id> value must match a strategy <id> defined in your strategies.xml config. Currently, BX-bot only supports 1 <strategy> per <market>.

Strategies

You specify the Trading Strategies you wish to use in the strategies.xml file.

<trading-strategies>
    <strategy>
        <id>scalping-strategy</id>
        <name>Basic Scalping Strat</name>
        <description>
         A simple trend following scalper that buys at the current BID price, holds until current market 
         price has reached a configurable minimum percentage gain, and then sells at current ASK price, thereby 
         taking profit from the spread. Don't forget to factor in the exchange fees!
        </description>
        <class-name>com.gazbert.bxbot.strategies.ExampleScalpingStrategy</class-name>
        <optional-config>
            <config-item>
                <name>counter-currency-buy-order-amount</name>
                <value>20</value>
            </config-item>
            <config-item>
                <name>minimum-percentage-gain</name>
                <value>2</value>
            </config-item>
        </optional-config>
    </strategy>
    <strategy>
        <id>macd-strategy</id>
        <name>MACD Based Strat</name>
        <description>Strat uses MACD data to take long position in USD.</description>
        <class-name>com.gazbert.bxbot.strategies.YourMacdStrategy</class-name>
        <optional-config>
            <config-item>
                <name>counter-currency-buy-order-amount</name>
                <value>20</value>
            </config-item>
            <config-item>
                <name>shortEmaInterval</name>
                <value>12</value>
            </config-item>
            <config-item>
                <name>longEmaInterval</name>
                <value>26</value>
            </config-item>
        </optional-config>
    </strategy>
</trading-strategies>

All elements are mandatory unless stated otherwise.

• The <id> value is a unique identifier for the strategy. The markets.xml <trading-strategy-id> entries cross-reference this. Value must be an alphanumeric string. Underscores and dashes are also permitted.

• The <name> value is a friendly name for the strategy. The is used in the logs and by BX-bot UI (work in progress) to display the strategy's name. Value must be an alphanumeric string. Spaces are allowed.

• The <description> value is optional, and used by BX-bot UI (work in progress) to display the strategy's description.

• For the <class-name> value, you must specify the fully qualified name of your Trading Strategy class for the Trading Engine to inject on startup. The class must be on the runtime classpath.

• The <optional-config> section is optional. It allows you to set key/value pair config items. This config is passed to your Trading Strategy when the bot starts up; see the How do I write my own Trading Strategy? section.

Email Alerts

You specify the Email Alerts config in the email-alerts.xml file.

This config is used to send email alerts when the bot is forced to shut down due to an unexpected error occurring in the Trading Strategies or Exchange Adapters. The email is sent to the SMTP host using TLS.

<email-alerts>
    <enabled>false</enabled>
    <smtp-config>
        <smtp-host>smtp.gmail.com</smtp-host>
        <smtp-tls-port>587</smtp-tls-port>
        <account-username>[email protected]</account-username>
        <account-password>your.account.password</account-password>
        <from-addr>[email protected]</from-addr>
        <to-addr>[email protected]</to-addr>
    </smtp-config>
</email-alerts>

All elements are mandatory unless stated otherwise.

• If <enabled> is set to 'true', the bot will send email alerts to the <to-addr> if it needs to shut down due to a critical error.

• The <smtp-config> config is optional and only required if <enabled> is set to 'true'. Sample SMTP config for using a Gmail account is shown above - all elements within <smtp-config> are mandatory.

How do I write my own Trading Strategy?

"Battle not with monsters, lest ye become a monster, and if you gaze into the abyss, the abyss gazes also into you." - Friedrich Nietzsche

The best place to start is with the ExampleScalpingStrategy - more ideas can be found here. There is also a Trading Strategy specific channel on Gitter.

Your strategy must implement the TradingStrategy interface. This allows the Trading Engine to:

• Inject your strategy on startup.
• Pass any configuration (set in the strategies.xml) to your strategy.
• Invoke your strategy at each trade cycle.

The Trading Engine will only send 1 thread through your Trading Strategy; you do not have to code for concurrency.

Making Trades

You use the TradingApi to make trades etc. The API is passed to your Trading Strategy implementation init method when the bot starts up. See the Javadoc for full details of the API.

Error Handling

Your Trading Strategy implementation should throw a StrategyException whenever it 'breaks'. BX-bot's error handling policy is designed to fail hard and fast; it will log the error, send an Email Alert (if configured), and shut down.

Note that the inbuilt Exchange Adapters will (some more often than others!) throw an ExchangeNetworkException if they encounter network issues connecting with the exchange. Your strategy should always catch this exception and choose what to do next, e.g. retry the previous Trading API call, or 'swallow' the exception and wait until the Trading Engine invokes the strategy again at the next trade cycle.

Configuration

You specify the Trading Strategies you wish to use in the strategies.xml file - see the Strategies Configuration section for full details.

The <optional-config> section in the strategies.xml allows you to set key/value pair config items to pass to your Trading Strategy implementation. On startup, the Trading Engine will pass the config to your Trading Strategy's init(TradingApi tradingApi, Market market, StrategyConfig config) method.

Dependencies

Your Trading Strategy implementation has a compile-time dependency on the Strategy API and the Trading API.

The inbuilt ExampleScalpingStrategy also has a compile-time dependency on log4j and Google Guava.

Packaging & Deployment

To get going fast, you can code your Trading Strategy and place it in the bxbot-strategies module alongside the example strategy. When you build the project, your Trading Strategy will be included in the BX-bot jar. You can also create your own jar for your strats, e.g. my-strats.jar, and include it on BX-bot's runtime classpath - see the Installation Guide for how to do this.

How do I write my own Exchange Adapter?

"I was seldom able to see an opportunity until it had ceased to be one." - Mark Twain

The best place to start is with one of the inbuilt Exchange Adapters - see the latest BitstampExchangeAdapter for example. There is also an Exchange Adapter specific channel on Gitter.

Your adapter must implement the TradingApi and the ExchangeAdapter interfaces. This allows the:

• Trading Engine to inject your adapter on startup.
• Trading Engine to pass any configuration (set in the exchange.xml) to your adapter.
• Trading Strategies to invoke your adapter's implementation of the TradingApi at each trade cycle.

AbstractExchangeAdapter is a handy base class that all the inbuilt Exchange Adapters extend - it could be useful.

The Trading Engine will only send 1 thread through your Exchange Adapter; you do not have to code for concurrency.

Error Handling

Your Exchange Adapter implementation should throw a TradingApiException whenever it breaks; the Trading Strategies should catch this and decide how they want to proceed.

The Trading API provides an ExchangeNetworkException for adapters to throw when they cannot connect to the exchange to make Trading API calls. This allows for Trading Strategies to recover from temporary network failures. The exchange.xml config file has an optional <network-config> section, which contains <non-fatal-error-codes> and <non-fatal-error-messages> elements - these can be used to tell the adapter when to throw the exception.

The first release of the bot is single-threaded for simplicity. The downside to this is that if an API call to the exchange gets blocked on IO, BX-bot will get stuck until your Exchange Adapter frees the block. The Trading API provides an ExchangeNetworkException for your adapter to throw if it times-out connecting to the exchange. It is your responsibility to free up any blocked connections - see the AbstractExchangeAdapter for an example how to do this.

The Trading Engine will also call your adapter directly when performing the Emergency Stop check to see if the <emergency-stop-currency> wallet balance on the exchange drops below the configured <emergency-stop-value> value. If this call to the TradingApi getBalanceInfo() fails and is not due to a ExchangeNetworkException, the Trading Engine will log the error, send an Email Alert (if configured), and shut down. If the API call failed due to an ExchangeNetworkException, the Trading Engine will log the error and sleep until the next trade cycle.

Configuration

You provide your Exchange Adapter details in the exchange.xml file - see the Exchange Adapters Configuration section for full details.

The <optional-config> section in the exchange.xml allows you to set key/value pair config items to pass to your Exchange Adapter implementation. On startup, the Trading Engine will pass the config to your Exchange Adapter's init(ExchangeConfig config) method.

Dependencies

Your Exchange Adapter implementation has a compile-time dependency on the Trading API.

The inbuilt Exchange Adapters also have compile-time dependencies on log4j, Google Gson, and Google Guava.

Packaging & Deployment

To get going fast, you can code your Exchange Adapter and place it in the bxbot-exchanges module alongside the other inbuilt adapters. When you build the project, your Exchange Adapter will be included in the BX-bot jar. You can also create your own jar for your adapters, e.g. my-adapters.jar, and include it on BX-bot's runtime classpath - see the Installation Guide for how to do this.

Logging

Logging for the bot is provided by log4j. The log file is written to logs/bxbot.log using a rolling policy. When a log file size reaches 100 MB or a new day is started, it is archived and a new log file is created. BX-bot will create up to 7 archives on the same day; these are stored in a directory based on the current year and month. Only the last 90 archives are kept. Each archive is compressed using gzip. The logging level is set at info. You can change this default logging configuration in the config/log4j2.xml file.

I recommend running at info level, as debug level logging will produce a lot of output from the Exchange Adapters; it's very handy for debugging, but not so good for your disk space!

Coming Soon

The following features are in the pipeline:

• A REST API for administering the bot. It's being developed on the bxbot-restapi branch.
• An admin server for proxying commands and config updates to BX-bots in the cloud. It will consume the bot's REST API.
• A Web UI written in Angular for administering multiple bots in the cloud. It will integrate with the admin server.

See the main project Issue Tracker for timescales and progress.