Plutosdr-fw: Submodule update

 * Linux, HDL: Switch to 2021_R2 branches
 * Buildroot update to master, which previously merged master-next

Submodule buildroot 6d681cb..0081bbc:
  > Merge pull request #79 from analogdevicesinc/master-next
  > board/pluto: Add support for Android USB Tethering
  > configs: zynq_[pluto|m2k]_defconfig: Switch to buildroot toolchain

Submodule hdl d09fc92...e5660db:
  > fmcadc5: Fix issue created by modifying ad_disconnect
  > projects/adrv9009zu11eg: Fix lane swap on tx1_c when used with fmcomms8
  > scripts: adi_board: Update ad_disconnect procedure
  > ad9081: vck190: Update default profile
  > projects: Fix intermitent timing violation on a10soc
  > Remove extra FIELD marker in regmap
  > regmap/adi_regmap_common.txt: Add missing RD_RAW_DATA field
  > docs/regmap: Added the new ADDRESS_HIGH registers to the DMAC regmap
  > axi_dmac: Add suport for 64 bit address width New improvements for the ADI DMAC IP: 1)The capability to manually overwrite the DMA_AXI_ADDR_WIDTH(from GUI or from tcl) 2)DMA_AXI_ADDR_WIDTH attribute is now visible in the Vivado GUI: -"Auto mode": Automatically calculated by the core tcl files based on the existing attached address segments. -"Manual mode": Specify the desired dma_width between 32-64 bits. 3)Added two new debug registers that return higher part of the current source/destination address.
  > ad9081_fmca_ebz_x_band:zcu102: X band project initial version
  > ad9083 based projects: Expose JESD parameters
  > ad9083_vna: Init commit
  > up_adc_common: Update IPs and adi_regmap_adc definition file to latest up_adc_common module
  > up_adc_common: Add register data reading/writing functionality
  > up_adc_channel: Update IPs and adi_regmap_adc definition file to latest up_adc_channel module
  > common/up_adc_channel: Add raw data reading functionality
  > projects/common: Add build files templates carriers. Modified Quartus Versions
  > cn0506: Update project's directory name in the README file
  > adrv9009zu11eg/common/adrv9009zu11eg_bd: Add logic for TX_JESD_L=4
  > adrv9009/common/adrv9009_bd: Add logic for TX_JESD_L=2
  > projects/fmcomms8: Expose jesd params, add support for TX_JESD_L=4
  > projects/cn0501: Updated with axi_ad7768 IP for Coraz7s
  > The memory interconnect was moved from HP0 to HP1 on Coraz7s projects (#1023)
  > ad719x_asdz/coraz7s: Initial commit
  > run_tb.sh:don't run xsim if previous commands fail
  > library/jesd204/ad_ip_jesd204_tpl_adc: Added support for PN7 and PN15 (#1019)
  > ad4630_fmc: Match project name with folder name
  > ad9783_ebz: Match project name with folder name
  > projects/adrv9009zu11eg: expose jesd params to make and add FMCOMMS8 parameter
  > library/scripts/library.mk: clean files form tb
  > coraz7s: Memory interconnect fix (#1014)
  > docs/regmap: Added ADI regmap_*.txt files (#1008)
  > axi_ltc2387: Update up_adc_common and up_adc_channel instances
  > axi_ltc2387: Make adc_valid to represent the current sample
  > cn0577/zed: Update xdc to diff_term true. Disable csn in system_top
  > projects/common: Add system_top _project templates
  > docs: Add common template for evaluation board specific fmc files
  > projects/scripts: Add fmc constraints generator script
  > projects: Add fmc connection files for eval boards
  > projects/common: Add fmc connection files for every platform
  > projects: starndadize the jesd make parameters
  > scripts/check_readme: Change search to be case insensitive
  > common/tb/ad_pack_tb: Add non random scenario as first test for easier debug
  > ad9082_fmca_ebz/zcu102: Make TPL width overwritable
  > axi_jesd204: Cleanup unused parameter
  > axi_jesd204_rx/jesd204_up_rx: Set buffer delay in beats of device clock
  > ad9081_fmca_ebz: Make TPL width overwritable
  > library/jesd204: Add support for a gearbox ratio in which the TPL width is smaller than the PHY interface
  > library/jesd204: Update the script which computes the TPL width to be able to assign custom values
  > ad9081_fmca_ebz/common: Use the script to compute the TPL width
  > adi_pd.tcl: Fix sysid branch string
  > projects: Fix some Makefiles
  > scripts:adi_env: Change the default version of Quartus Standard to 21.1 (#996)
  > Added axi_ad7768 IP Core (#989)
  > library/scripts/adi_ip_xilinx.tcl: remove duplicate adi_env.tcl source
  > scripts:adi_env: Change the default version of Quartus Pro to 21.4 (#988)
  > scripts: Set required Vivado version only in adi_env.tcl
  > scripts: Update Vivado version to 2021.2
  > library/common: Enable automatic logging of simulation output
  > library/common: Update the packing IPs to be more generic
  > AD777x support for ZedBoard and DE10Nano (#937)
  > axi_ltc2387: Update data formatter instance to use bits instead of octets
  > jesd204/ad_ip_jesd204_tpl_adc: Fix data formater for N'=12 if DMA interface is also 12
  > scripts: Merge adi_env.tcl into a single file
  > library/jesd204: Updated jesd to support more lanes Modified the maximum number of supported lanes up to 32 lanes for every JESD layer
  > ad9081_fmca_ebz/vck190: Expose ref clock parameter
  > ad9081_fmca_ebz/common/versal_transceiver: Separate lane rates for Tx and Rx
  > ad9082_fmca_ebz/zcu102: Make JESD_MODE overwritable
  > util_do_ram: Fix Rx path for interrupted transfers
  > util_axis_fifo_asym: Fixes for simulation
  > data_offload: Fix Tx bypass
  > adi_pd.tcl: Fix git_clean_string logic
  > cn0561_coraz7s: Fix gpio connections
  > sysid: Add sysid support for de10nano
  > ad9082_fmca_ebz/zc706: Fix parameters
  > ad9082_fmca_ebz/vcu118:  Fix default lane rate parameter
  > ad9082_fmca_ebz/zcu102: Fix default lane rate parameter
  > data_offload: Increase bypass FIFO size
  > ad9081_fmca_ebz: Reset cpack with Rx data offload
  > vcu128: Connect sys_mb_rstgen/ext_reset_in accordingly
  > ad_ip_jesd204_tpl_adc_hw.tcl: Add 14 bit option for converter resolution
  > scripts/adi_project_xilinx.tcl: Add new constraints file support
  > Merge CN0506 projects into a parameterized one
  < util_do_ram: Fix Rx path for interrupted transfers
  < util_axis_fifo_asym: Fixes for simulation
  < data_offload: Fix Tx bypass
  < sysid: Add sysid support for de10nano
  > action: Add workflow for github action to run check_guideline.py
  > script: Add Py script to check for guideline rules & README.md
  > projects: Update .v files according to guideline
  > libraries: Update modules according to guideline
  > lint: Update to run only in PRs. Change version for checkout action
  > ad9081_fmca_ebz: a10soc: Update resistor change comment
  > .gitignore: ignore files generated by Quartus & Platform Designer Added the files generated by Quartus Pro 21.2, 20.1 and Platform Designer for each of the versions. The files added are generated and removed by make.
  > ad_quadmxfe1_ebz/vcu118/system_project.tcl: Update  comments
  > ad_fmclidar1_ebz:a10soc Fixed problems with SPI communication with AD9094 (#951)
  > projects:daq2:common: fix adi_tpl_jesd204_rx_create error. (#952)
  > .gitignore: Fix to ignore imbricated bd.tcl files too
  > PN mismatch DAQ2, DAQ3 and FMCJESDADC1 fix (#950)

Submodule linux 9dfba10...3eae700:
  > ci: don't fail ci build over changed defconfig
  > ci: add new internal function to setup git account
  > arch: arm: configs: explicitly disable gcc-plugins
  > microblaze: dts: Update compatible xlnx,axi-iic-2.1
  > arch: arm64: adrv9009-zu11eg: Update hmc7044_ext
  > iio: adc: adrv9002: fix mixed declarations and code in the API
  > iio: adc: adrv9002: fix unused variable warning in the API
  > iio: adc: adrv9002: fix api usage of 'printf()'
  > firmware: Update firmware for adrv9002
  > iio: adc: adrv9002: Update API to 68.0.6
  > iio: adc: ad7124: fix sequencer support
  > iio: adc: ad4630: reset averaging on test_pattern mode
  > iio: adc: ad4630: add missing test_pattern channel
  > arch: arm: boot: dts: fix ad4630 hdl tag
  > iio: kconfig.adi: imply AD4630
  > arch: arm: boot: dts: Add ad4630-24 dts
  > Documentation: ABI: testing: Add ad4630 sysfs description
  > drivers: iio: adc: add support for ad4630
  > dt-bindings: iio: adc: Add docs for ad4630
  > hwmon: (ltc2947) fix temperature scaling
  > iio: dac: ltc2688: fix voltage scale read
  > arch: arm: boot: dts: Fix cn0506 socfpga DT
  > net: ethernet: stmicro: stmmac_main: Fix mode mask
  > net: phy: adin: add support for clock output
  > dt-bindings: net: adin: document phy clock output properties
  > arch: arm: dts: arria10_adrv9002: Devices names inconsistency
  > arch: arm: dts: add devicetree for ADAQ8092
  > drivers: iio: Kconfig.adi: add ADAQ8092
  > iio:adc:adaq8092: add support for ADAQ8092
  > dt-bindings: iio: adc: add ADAQ8092 doc
  > iio: frequency: ad9172: Fix jesd204-fsm final state transition
  > media: xilinx: xilinx-hdmirxss: fix 64bit division on 32bit archs
  > clkk: clk-xlnx-clock-wizard-v: fix 64bit division on 32bit archs
  > clk: clk-xlnx-clock-wizard: fix 64bit division on 32bit archs
  > include: linux: remoteproc: fix 'da_to_va()' type
  > pwm: pwm-sti: fix 64bit division on 32bit architectures
  > iio: adc: adi-axi-adc: fix compilation
  > spi: spi-bcm2835: fix compilation
  > usb: phy: phy-ulpi.c: sync with upstream
  > clk: clk-xlnx-clock-wizard-v: fix missing bitfield include
  > clk: clk-xlnx-clock-wizard: fix missing bitfield include
  > Kconfig.adi: imply AD74115
  > iio: addac: ad74115: remove unused ad74115_dac_slew_rate_hz_tbl
  > iio: addac: add AD74115 driver
  > dt-bindings: iio: addac: add AD74115
  > iio: addac: ad74413r: add support for reset-gpio
  > dt-bindings: iio: ad74413r: add optional reset-gpios
  > iio: addac: ad74413r: add spi_device_id table
  > watchdog: dw_wdt: stop on reboot
  > watchdog: stop wdd when watchdog hw running in reboot_notifier
  > iio: adc: adrv9002: add spi id_table support
  > iio: adc: adrv9002: add myself as MODULE_AUTHOR
  > iio: adc: adrv9002: move OF specific code to it's own file
  > iio: adc: adrv9002: Re-order function declarations
  > iio: adc: adrv9002: always select CF_AXI_ADC
  > iio: adc: adrv9002: constify where possible
  > iio: adc: adrv9002: add helper to get hop table
  > iio: adc: adrv9002: add helper to set carrier frequency
  > iio: adc: adrv9002: add helper to get/set hardware gain
  > iio: adc: adrv9002: improve IIO read/write() callbacks code flow
  > iio: adc: adrv9002: remove meaningless '__maybe_unused'
  > iio: adc: adrv9002: add macro to wrap api calls
  > iio: adc: adrv9002: drop custom, repeated macros
  > iio: adc: adrv9002: small improvement on profile read
  > iio: adc: adrv9002: remove sysfs bin attrs size check
  > iio: adc: adrv9002: add comment on why 'hop_tbl' is static
  > iio: adc: adrv9002: fix possible data race
  > iio: adc: adrv9002: properly return error code
  > iio: adc: adrv9002: properly set gain table type
  > net: usb: smsc95xx: fix external PHY reset
  > drivers: iio: accel: Add support for ADXL359 device
  > dt-bindings: iio: accel: Add docs for ADXL359
  > drivers: iio: accel: Use warning if invalid device id is detected
  > iio: adc: ad4130: depend on GPIOLIB
  > Documentation: ad4130: format list of in_voltage-voltage_filter_mode_available modes
  > iio: adc: ad4130: Fix spelling mistake "diffreential" -> "differential"
  > iio: temperature: ltc2983: support more parts
  > dt-bindings: iio: temperature: ltc2983: support more parts
  > dt-bindings: iio: temperature: ltc2983: use generic node name in example
  > dt-bindings: iio: temperature: ltc2983: describe broken mux delay property
  > dt-bindings: iio: temperature: ltc2983: refine descriptions
  > dt-bindings: iio: temperature: ltc2983: change default excitation for custom thermistors
  > dt-bindings: iio: temperature: ltc2983: require 4 wire rtd for current rotate
  > dt-bindings: iio: temperature: ltc2983: require custom sensor tables
  > dt-bindings: iio: temperature: ltc2983: describe matrix items
  > dt-bindings: iio: temperature: ltc2983: remove qutations from phandle ref
  > dt-bindings: iio: temperature: ltc2983: use hex for sensor address
  > dt-bindings: iio: temperature: ltc2983: add default values
  > iio: temperature: ltc2983: make bulk write buffer DMA-safe
  > iio: temperature: ltc2983: allocate iio channels once
  > dt-bindings: iio: adi,ltc2983: Fix 64-bit property sizes
  > iio: temperature: ltc2983: Make use of device properties
  > iio: temperature: ltc2983: Use single error path to put OF node
  > iio: temperature: ltc2983: Don't hard code defined constants in messages
  > iio: ltc2983: fail probe if no channels are given
  > iio: ltc2983: add support for optional reset gpio
  > iio: ltc2983: fix device probe
  > net: ethernet: adi: adin1110: Fix notifiers
  > Kconfig.adi: imply AD4130
  > iio: adc: ad4130: add AD4130 driver
  > dt-bindings: iio: adc: add AD4130
  > dt-bindings: net: adin1110: Document reset
  > net: ethernet: adi: adin1110: add reset GPIO
  > net: ethernet: adi: adin1110: Fix SPI transfers
  > net: ethernet: adi: adin1110: Add check in netdev_event
  > drivers: jesd204 :jesd204-core: copy_link_params() sysref param fix
  > iio: adis: add '__adis_enable_irq()' implementation Add '__adis_enable_irq()' implementation which is the unlocked version of 'adis_enable_irq()'. Call '__adis_enable_irq()' instead of 'adis_enable_irq()' from '__adis_intial_startup()' to keep the expected unlocked functionality.
  > iio: addac: ad74413r: fix integer promotion bug in ad74413_get_input_current_offset()
  > arch: arm: boot: dts: Add devicetree for ltc2387
  > drivers: iio: adc: Add support for LTC2387
  > dt-bindings: iio: adc: Add docs for ltc2387
  > arm: dts: Add ad9083_a10soc Development Kit support
  > arch: arm64: boot: dts: update stingray HDL tags
  > arch: microblaze: dts: Add sysid support vcu118
  > arch: arm: dts: de10nano: add sysid support
  > iio: kconfig.adi: imply MAX11410
  > Documentation: ABI: testing: add max11410 doc
  > dt-bindings: iio: adc: add adi,max11410.yaml
  > iio: adc: add max11410 adc driver
  > arm64: zynqmp-zcu102-rev10-stingray: Update ADAR1000s labels
  > arm64: zynqmp-zcu102-rev10-stingray: Disable the one shot mode
  > arm64: zynqmp-zcu102-rev10-stingray: Provide all 4 available options
  > arm64: zynqmp-zcu102-rev10-stingray: Update stingray_control
  > iio: adc: adrv9002: add support for external LOS
  > arch: arm64: dts: fix adrv9002 ref clock property
  > arch: arm: dts: fix adrv9002 ref clock property
  > arch: arm: dts: fix incorrect DMA address range
  > arch: arm: dts: add zedboard ad4134
  > Kconfig.adi: imply AD4134 driver
  > iio: adc: ad4134: add AD4134 driver
  > dt-bindings: iio: adc: add AD4134
  > kconfig.adi: make use of imply keyword
  > clk: kconfig.adi: make use of imply keyword
  > hwmon: kconfig: make use of imply keyword
  > iio: kconfig.adi: make use of imply keyword
  > input: kconfig.adi: make use of imply keyword
  > media: kconfig.adi: make use of imply keyword
  > usb: kconfig.adi: make use of imply keyword
  > soc: codecs: kconfig: make use of imply keyword
  > drivers: spi: spi-axi-spi-engine: Increase buffer
  > drivers: spi: spi-axi-spi-engine: Add word delay
  > drivers: spi: spi-axi-spi-engine: Add BPW mask
  > arch: arm64: dts: fmcbridge: update hdl tag
  > net: ethernet: adi: adin1110: sync with upstream
  > iio: adc: adrv9002: improve debugfs enablement delays reading
  > iio: adc: adrv9002: drop 'bin_attr_sz' variable
  > iio: adc: adrv9002: simplify probing
  > iio: adc: adrv9002: make use of read_poll_timeout()
  > iio: adc: adrv9002: fix enablement delays validations
  > arch/arm/boot/dts: a10soc_ad9136 dts: add hdl tag
  > arch: arm64: dts: xmicrowave: fix hdl tag
  > dts: xilinx/zynqmp-zcu102-rev10-adrv9009-tx-l2: Add dts for TX lanes=2
  > dts: zynqmp-adrv9009-zu11eg-fmcomms8-tx-l8: Add dts for TX lanes=8
  > dts: zynqmp-zcu102-rev10-adrv9009-fmcomms8-tx-l4: Add dts for TX lanes=4
  > dts: zynqmp-adrv9009-zu11eg-tx-l4: Add dts for TX lanes=4
  > dts: zynq-zc706-adv7511-adrv9009-tx-l2: Add dts for TX lanes=2
  > CI: install GitPython for checkpatch
  > iio: filter: admv8818: fix out-of-bounds read
  > iio: adc: adrv9002: remove check for "</table" in frequency hopping
  > CI:fix push to Artifactory
  > CI: update upload_to_artifactory.py
  > drivers: iio: adc: Rename the LTC2499 iio device
  > drivers: iio: adc: LTC2499 support
  > Add MAINTAINERS entries for LTC2497 and LTC2496
  > dt-bindings: iio: adc: Add docs for LTC2499
  > Remove duplicate matching entry
  > iio: ltc2497: Fix reading conversion results
  > dt-bindings: iio: adi,ad7923: add adi,range-double property
  > iio: adc: ad7923: support extended range
  > iio: adc: ad7923: fix channel readings for some variants
  > iio: dac: ad5593r: Fix i2c read protocol requirements
  > drivers: iio: accel: adxl312 and adxl314 support
  > dt-bindings: iio: accel: adxl313: Add compatibles for adxl312 and adxl314
  > iio: buffer: dmaengine: make iio_dmaengine_buffer_alloc() private
  > misc: mw_stream_iio_channel: make use of devm_iio_dmaengine_buffer_alloc()
  > iio: frequency: m2k-dac: move to device managed probe
  > iio: dac: cf_axi_dds: move to device managed probe
  > iio: adc: cf_axi_adc_core: move to device managed probe
  > iio: adc: admc_speed: move to device managed probe
  > iio: adc: admc_adc: move to device managed probe
  > iio: adc: ad_adc: move to device managed probe
  > iio: adc: ad7768-1: make use of devm_iio_dmaengine_buffer_alloc()
  > iio: adc: ad400x: move to device managed probe
  > iio: logic: m2k-logic-analyzer: make use of devm_iio_dmaengine_buffer_alloc()
  > iio: adc: ad7768-1: fix hardware buffer allocation
  > README: update links
  > dts: socfpga_arria10_socdk_cn0506: update HDL tag
  > dts: zynqmp-zcu102-rev10-cn0506: update HDL tag
  > dts: zynq-zed-adv7511-cn0506: update HDL tag
  > dts: zynq-zc706-adv7511-cn0506: update HDL tag
  > arch: arm64: config: update adi configuration
  > Merge tag 'xilinx-v2021.2' of https://github.com/Xilinx/linux-xlnx.git
  > CI:fix push to Artifactory
  > spi: spi-xilinx: Fix bits_per_word_mask
  > arch: arm64: dts: add adrv9003 devicetrees
  > arch: arm: dts: add adr9003 devicetrees
  > arch: arm64: adi_zynqmp_defconfig: add adrv9003 profiles
  > arch: arm: zynq_xcomm_adv7511_defconfig: add adrv9003 profiles
  > firmware: add adrv9003 default profiles
  > iio: adc: adrv9002: support adrv9003
  > dmaengine: axi-dmac: check cache coherency register
  > dts: zynqmp-zcu102-rev10-ad9082-204c-txmode36-rxmode28: New use case
  > drivers: iio: Kconfig.adi: add ADXL313
  > CI:change date format in rpi_git_properties.txt
  > iio: adc: ad9371: Fix device attribute calibrate read return value
  > iio: adc: adrv9009: Fix device attribute calibrate read return value
  > zcu102_ad9695.dts: update hdl tag
  > arch: arm64: dts: adrv9002: Fix/Update TX DMA interrupt
  > iio: adc: ad9467: don't prepare clk for ad9250
  > dts: zynq-zc706-adv7511-ad9081-np12.dts: Fix axi_jesd204_[rx|tx] clocks
  > spi: spi-zynzmp-gqspi: Increase timeout interval during data transfer
  > spi: spi-zynq-gqspi: Set appropriate tapdelay during driver initialization
  > spi: spi-zynqmp-gqspi: Fix the zynqmp qspi driver call to get the spi controller devdata
  > spi: spi-zynqmp-gqspi: Fix chipselect timeout issue
  > Revert "spi: spi-zynqmp-gqspi: Check for TXFIFO Empty before transfer complete"
  > adi-axi-data-offload: Deprecate sample counter
  > adi-axi-data-offload: Use one hot encoded states
  > arm: dts: add socfpga_cyclone5_de10_nano_hps
  > arch: arm64: dts: stingray: use custom model name
  > iio: adc: ad9081: API Version 1.3.1
  > dts: zynqmp-zcu102-rev10-ad9082-204c-txmode22-rxmode23-dual: Add example
  > iio: adc: ad9081: Devicetree support for SERDES controls
  > jesd204:axi_adxcvr.c Rate debug message
  > iio:jesd204:xilinx_transceiver.c: Fix function type (static function)
  > iio: adc: adrv9002: fix tdd rate calculation
  > iio: adc: adrv9002: refactor 'adrv9002_parse_dt()'
  > dt-bindings: iio: adrv9002: remove non existent defines
  > iio: adc: adrv9002: fix frequency hopping when no gpios are set
  > iio: adc: adrv9002: fix tdd clock export
  > arm64: dts: zynqmp-zcu102-rev10-ad9082-m4-l8.dts: Fix ref clock
  > arm: dts: arria10_ad9081: Fix device_clk linking
  > arm64: dts: adrv9009-zu11eg-fmcomms8: Added coarse delays
  > iio: adc :ad9081: Dual link support for bist_prbs_error_counters_jrx
  > drivers: pwm: axi-pwmgen: Add PWM ops
  > Documentation: ABI: testing: pwm: Add time_unit
  > drivers: pwm: axi-pwmgen: Add time unit support
  > Documentation: driver-api: pwm.rst: Add time_unit
  > drivers: pwm: core: Add PWM time unit
  > include: linux: pwm.h: Fix pwm_apply_args
  > Documentation: pwm: Add phase documentation
  > drivers: pwm: sysfs: Add phase sysfs
  > include: linux: pwm: Convert phase to u64
  > pwm: Convert period and duty cycle to u64
  > drivers: pwm: axi-pwmgen: Rename offset
  > include: linux: pwm.h: Rename offset
  > drivers: usb: chipidea: Let the PHY set VBUS
  > arch: arm: boot: dts: Remove unused usb-phy
  > iio: adc: adrv9009: Provide InitCal status upon error
  > iio: adc: talise: Fix corner case in reference clock handling
  < arch: arm: boot: dts: zed+ad4630: update hdl tag
  > serial: max310x: implement I2C support
  > serial: max310x: make accessing revision id interface-agnostic
  > serial: max310x: use a separate regmap for each port
  > serial: max310x: use regmap methods for SPI batch operations
  > serial: max310x: Make use of device properties
  > serial: max310x: unregister uart driver in case of failure and abort
  > Revert "serial: max310x: pass return value of spi_register_driver"
  > Revert "serial: max310x: rework RX interrupt handling"
  < dts: vcu118_ad9081.dts: Add axi-data-offload engine support
  < dts: vcu128_ad9081.dts: Fix axi-data-offload node names
  < iio: jesd204: xilinx_transceiver.c: Fix error handling
  < drivers: iio: addac: one-bit-adc-dac: Remove unused var
  < drivers: iio: addac: one-bit-adc-dac: Fix read_label()
  < arch: arm: boot: dts: Add ad4630-24 dts
  < drivers: iio: adc: AD4630
  < Documentation: ABI: testing: Add ad4630 sysfs description
  < dt-bindings: iio: adc: Add docs for ad4630
  < drivers: pwm: axi-pwmgen: Add PWM ops
  < Documentation: ABI: testing: pwm: Add time_unit
  < drivers: pwm: axi-pwmgen: Add time unit support
  < Documentation: driver-api: pwm.rst: Add time_unit
  < drivers: pwm: core: Add PWM time unit
  < include: linux: pwm.h: Fix pwm_apply_args
  < Documentation: pwm: Add phase documentation
  < drivers: pwm: sysfs: Add phase sysfs
  < include: linux: pwm: Convert phase to u64
  < pwm: Convert period and duty cycle to u64
  < drivers: pwm: axi-pwmgen: Rename offset
  < include: linux: pwm.h: Rename offset
  < drivers: usb: chipidea: Let the PHY set VBUS
  < arch: arm: boot: dts: Remove unused usb-phy
  > iio: adc: ad9081: Remove "adi_utils.h" include
  > iio: adc: ad9081: Updates for API v1.3.0
  > iio: adc: ad9081: API Version 1.3.0
  > iio: jesd204: xilinx_transceiver.c: Fix error handling
  > iio: frequency: ad9528: Support for GPIO trigger SYSREF requests
  < arch: arm : boot: dts: set vcxo to 100 MHz
  > arch: arm : boot: dts: set vcxo to 100 MHz
  < arch: arm: dts: de10nano: add sysid support
  < zynqmp-zcu102-rev10-ad9082: fix HDL project tag
  < arch: arm: boot: dts: rename SPI Engine AXI CLKGEN
  > microblaze: boot: dts: Remove redundant axi-dmac channel nodes
  > microblaze: dts: adi-fmcjesdadc1.dtsi: Fix reg format warning
  > dts: vcu118_quad_ad908*: Add HDL Synthesis Parameters comments
  > dts: microblaze: vcu118_quad_ad908*: Fix typo ADRF4360 -> ADF4371
  > dts: vcu128_ad9081.dts: Fix axi-data-offload node names
  > dts: vcu118_ad9081.dts: Add axi-data-offload engine support
  > dts: vcu118_ad9081.dts: Drop redundant axi-dmac channel nodes
  > drivers: iio: addac: one-bit-adc-dac: Remove unused var
  > drivers: iio: addac: one-bit-adc-dac: Fix read_label()
  > arch: arm: boot: dts: rename SPI Engine AXI CLKGEN
  > iio: adc: ad9371_conv: Remove useless variable
  > dts: adrv9009/8: Fix JESD204 ADC/DAC TPL Core mappings
  > dts: ad9371: Fix JESD204 ADC/DAC TPL Core mappings
  > iio: adc: ad9371_conv: Remove DAC Core settings from the ADC TPL Core
  > iio: adc: adrv9009_conv: Remove DAC Core settings from the ADC TPL Core
  > iio: adc: ad9371_conv.c: Remove unused ad9371_hdl_loopback function
  > iio: adc: adrv9009_conv.c: Remove unused adrv9009_hdl_loopback function
  > iio: adrv9002: api fix mixed code declarations warnings
  > iio: adrv9002: api: do no use floating points
  > iio: adrv9002: api: fix stdlib includes and misc warnings
  > firmware: Update firmware for adrv9002
  > iio: adrv9002: Update API to 67.1.1
  > zynqmp-zcu102-rev10-ad9082: fix HDL project tag
  > drivers: iio: ad9467: fix ad9625 scale handling
  > CI:set 'exit 1' if timestamp folder is not found
  > drivers: iio: ad9467: fix ad9649 scale handling
  > CI:add z option to tar archive
  > iio: frequency: adf4371: Fix Lock Detect bit reading

Signed-off-by: Michael Hennerich <[email protected]>