links on index.html are not clear #23
Assignees
Labels
Comments
|
Yeah, that's true. Change is added to this branch: https://github.com/analogdevicesinc/buildroot/tree/index-html-update |
|
I think this is resolved - so closing. |
mhennerich
added a commit
that referenced
this issue
Jul 3, 2019
Submodule linux c2041af...387d584:
> iio: m2k-fabric: fix coding style issues
> iio: m2k-fabric: Merge m2k branch
> iio: m2k-trigger-ad: fix coding style issues
> iio: m2k-trigger-ad: Merge m2k branch
> iio: m2k-logic-analyzer: fix coding style issues
> iio: m2k-logic-analyzer: Merge m2k branch
> drivers: iio: remove adi,spi-3wire-enable & handling
> arch: arm{64},microblaze: use upstream/SPI's spi-3wire definition
> iio: adc: ad9963: fix codying style warnings
> iio: ad9963: Fix the info_mask_separate for the adc channel
> iio: adc: ad9963: Get m2k branch changes
> arm: dts: Add device trees for ADRV9008-1 and ADRV9008-2 on ZC706
> spi: spi-axi-engine: Fix buffer increment
> iio: m2k-dac: Fix checkpatch warnings
> iio: Add support for the dual channel M2K DAC interpolation core
> include: iio: buffer-dma: Include buffer_impl.h
> iio: include: ad9523: remove enum comments
> iio: ad9523: check and return on error when configuring channels
> travis: Added m2k build
> dtb: m2k: Fix dma controller nodes
> dtb: m2k: Add m2k device trees
> iio: adc: ad9963: Update Kconfig
> configs: arm: Added zynq_m2k_defconfig
> dts: zynq-zc706-adv7511-fmcomms11: Update AD9162 TPL address
> iio: adc: mykonos: mykonos: Add some sleep to relax this busy loop.
> drivers: iio: frequency: ad7192: Fix failed clocks warning
> dts:zynq-zc706-adv7511-ad9172-fmc-ebz.dts: fix TXEN gpios
> dts: adi-ad9172-fmc-ebz.dtsi: Change to Mode 4
> ad9172: fix multiplication for 32 bit systems
> arm: boot: dts: Add ad9172 device tree
> arm: configs: Add ad9172 configuration
> Replaced new const with a cast.
> Fix initial bank selection for IS25WP256D
> dmaengine: axi-dmac: remove old device-tree bindings support
> Documentation: devicetree: bindings: iio: frequency: hmc7044: Update
> iio: frequency: hmc7044: Add option to select the output-mux-mode
> include: dt-bindings: iio: frequency: hmc7044: Add dt-bindings include
> iio: hmc7044: Add read support for debugfs_reg_access
> iio: frequency: hmc7044: Disable all channels during initialization
> iio: frequency: hmc7044: Add support for channel coarse/fine delay
> iio: frequency: hmc7044: Add support for Pulse Generator Mode (SYSREF)
> iio: frequency: hmc7044: Add option to disable the high performace mode
> iio: adc: ad9371: Add support for RX or TX/ORx only configurations.
> iio: adc: mykonos: mykonos.c: Fix TX/OBsRX only operation
> staging: iio: adc: ad7192: Use read_avail for available attributes
> arch: microblaze: vcu118.dtsi: enable internal phy hack
> net: xilinx: axienet: add internal-phy auto-neg hack
> net: axienet: Fix double deregister of mdio
> arch: microblaze: vcu118.dtsi: enable 6-wire SGMII mode
> net: phy: dp83867: Add support for 6-wire mode in SGMII configuration
> net: phy: dp83867: Add binding for the CLK_OUT pin muxing option
> arch: microblaze: adi_mb_defconfig: enable TI DP83867 PHY driver
> arch: microblaze: dts: Add VCU118 device tree examples
> iio: jesd204: adxi_xcvr: Fix naming mismatch for GTH4
> iio: jesd204: Add support for GTY4
> dt-bindings: iio: adc: Add AD7616 ADC documentation
> iio: adc: ad7616: Add support for AD7616 ADC
> iio: adc: ad7606: Move oversampling options in chip info
> iio: adc: ad7768-1: Align with upstream version
> Merge pull request #353 from analogdevicesinc/master-xilinx-2018.3
> Documentation: devicetree: bindings: iio: frequency: adi,ad9172.txt: Add
> dts: adi-ad9172-fmc-ebz.dtsi: Add AD9172 device tree and config
> iio: frequency: cf_axi_dds: AD917x add support for different configurations
> iio: frequency: cf_axi_dds: [write|read]_raw forward to the converter
> iio: frequency: ad9172: Add AD9171/72/73/74/75/76 Dual 16-bit DAC driver
> iio: frequency: ad917x: Add AD936x API driver source
> clk: clk-adjustable-rate: clamp min and max rate to avoid overflows
> iio: jesd204: xilinx_transceiver: refclk use round closest
> net: xilinx: emaclite: add minimal ethtool ops
> net: xilinx: emaclite: add minimal ndo_do_ioctl hook
> ARM: dts: imageon-bridge: Set output mode to YCbCr 4:2:2
> media: imageon-loopback: call init before register
> iio: cf_axi_tdd: Typo fix
> iio: imu: adis16480: Validate the CRC when burst read function is used
> iio: imu: adis16480: Use the IIO_FLAGS channel to read diagnostic data
> iio: Implement flags channel type
> dt-bindings: iio: imu: Add ADIS16490 IMU documentation
> iio: imu: adis16480: Add support for ADIS16490
> input: adp5589: Add gpio_set_multiple interface
> iio: frequency: ad9523: sync with upstream
> arm: configs: zynq_xcomm_adv7511_defconfig: Enable ADR9009
> arm:dts:adrv9009: Make SPI addresses consistent
> arm: dts: zynq-zc706-adv7511-adrv9009.dts: update jesd204 node name
> arm: dts: adrv9009: Update default configuration
> arm: dts: adrv9009: Update tx-pa-protection-thresholds
> arm: dts: adrv9009: Enable dual observation channels
> iio: imu: adis16480: Add the option to enable/disable burst mode
> iio: imu: adis16480: Add support for burst read function
> iio: imu: adis: Add delay for burst function
> Revert "scatterlist: introduce sg_nents_for_dma() helper"
> dmaengine: axi-dmac: remove use of sg_nents_for_dma()
> dmaengine: axi-dmac: remove parantheses in if block
> iio: imu: adis16400: move adis16400.h into adis16400.c
> iio: imu: adis16400: rename adis16400_core.c -> adi16400.c
> iio: imu: adis16400: move burst logic to ADIS lib
> iio: imu: adis: generalize burst mode support
> iio: imu: adis16400: move trigger handler into adis16400_core
> staging: iio: adc: ad7192: Report error directly in ad7192_setup
> staging: iio: adc: ad7192: Convert platform data to DT properties
> staging: iio: adc: ad7192: Fix identation
> staging: iio: adc: ad7192: Use DT clock binding
> Revert "staging: iio: adc: ad7192: Added devicetree support."
> staging: iio: adc: ad7192: disable burnout currents on misconfig
> staging: iio: remove unnecessary parentheses
> staging: iio: adc: ad7192: use driver private lock to protect hardware state changes
> Revert "staging: iio: adc: ad7192: Add clock for external clock reference"
> Revert "staging: iio: adc: ad7192: Add clock output option"
> iio: dac: ad5758: Modifications for new revision
> Revert "Revert "Revert "dmaengine: remove DMA_SG as it is dead code in kernel"""
> arm: dts: adi-fmcomms11.dtsi: Fix location of fixed-factor-clock
> dmaengine: dma-axi-dmac: Fix cyclic transfers descriptors length
> dmaengine: dma-axi-dmac: Call callback for each period
> iio: imu: adis16480: Add support for external clock
> spi: spi-axi-engine: Fix buffer address incrementation
> iio: imu: adis16480: Align with upstream changes
> iio: adc: talise: Fix unused variable warnings
> iio: jesd204: axi_adxcvr: Fix PCORE version major
> clk: Revert "drivers/clk/clk: fix CLK_GET_RATE_NOCACHE"
> ASoC: adau1977: Add support for setting MICBIAS via DT
> ASoC: adau1977: Add MICBIAS example in DT bindings
> ASoC: adau1977: Fix reset-gpios typo
> ASoC: dt-bindings: add dt bindings for adau1977 audio codec
> staging: iio: ad7192: Fix ad7193 channel address
> iio: imu: adis16480: Add docs for ADIS16480 IMU
> iio: imu: adis16480: Add support for ADIS1649x family of devices
> iio: imu: adis16480: Treat temperature scale in a generic way
> iio: imu: adis16480: Add OF device ID table
> iio: imu: adis16480: Add support for configurable drdy indicator
> iio: imu: adis16480: Use the default data ready pin configuration
> clk: Fix clk_core_get_rate() warning
> iio: adc: ad6676: Fix warning
> iio: adc: ad9680: Fix warning
> iio: jesd204: axi_xcvr: Fix warnings
> arch: arm: update zynq_xcomm_adv7511_defconfig
> iio: adc: ad9361: Fix max filter HB rates and update the available attr.
> firmware/TaliseStream.bin: Update Talise stream
> iio: adc: adrv9009: Update for Filter Wizard Ver. 2.3
> firmware/Talise*: Update Firmware to ARM Revision: 6.0.2
> iio: adc: talise: Update Talise API version: 3.6.0.5
> iio: adc: talise: Remove unused files
> iio: jesd204: axi_xcvr: Add support for fpga info
> clk: clk-axi-clkgen: Add support for FPGA info
> fpga: adi-axi-common: Add common AXI register header
> arm: configs: zynq_pluto_defconfig: Enable USB_NET_CDCETHER and RNDIS_HOST
> README.md: reference wiki for building the kernel
> ci/travis: implement basic branch sync-ing mechanism for master
> ci/travis: remove tracing
> drivers: staging: ad9834: sync to upstreamed versions
> microblaze: dts: Remove the entries for the internal PHYs
> microblaze: dts: Add support for the base design projects
> net: ethernet: xilinx: Revert ADI's fixes
> dts: adi-adrv9371: Fix the previous commit
> dmaengine: xilinx_dma: sync driver back to Xilinx's version
> Revert "dmaengine: xilinx_dma: Move enum xdma_ip_type to driver file"
> arch: remove XILINX_DMA Kconfig symbols from ADI defconfigs
> arch: arm: zynq-zc706-imageon.dts: drop file
> arch: arm: zynq-zed-adv7511-pmod-ad1-da1.dts: include zed base dt
> drm: adi_axi_hdmi: compile Xilinx DMA logic only if driver is enabled
> staging: iio: frequency: ad9833: Load clock using clock framework
> staging: iio: frequency: ad9833: Get frequency value statically
> arch: arm64: update adi_zynqmp_defconfig
> iio: adc: ad9361: Fix bug in ad9361_gt_bin_read()
> iio: adc: ad9361: Fix open brace placement
> spi: spi-axi-engine: fix write buffer value to register
> iio: adc: ad400x: Add offset mask
> iio: adc: ad400x: Fix register read
> iio: frequency: ad9528: Fix device tree readings for missing attributes
> iio: frequency: ad9528: Fix PLL1_CTRL bit definition
> dt-bindings: iio: adc: Add AD7606B ADC documentation
> iio: adc: ad7606: Add support for AD7606B ADC
> iio: adc: ad7606: Rework *_avail attributes in a generic way
< arm: configs: zynq_pluto_defconfig: Enable ext4 filesystem support
> README.md: add our own readme that should be picked up by the Github markdown engine
> iio: adc: ad7768-1: Add support for setting the sampling frequency
> dt-bindings: iio: adc: Add docs for AD7768-1
> iio: adc: Add AD7768-1 ADC basic support
> dt-bindings: iio: adc: Add docs for AD7606 ADC
> staging: iio: adc: ad7606: Move out of staging
> staging: iio: adc: ad7606: Misc style fixes (no functional change)
> staging: iio: adc: ad7606: Add support for threaded irq
> staging: iio: adc: ad7606: Use SPDX identifier
> staging: iio: adc: ad7606: Simplify the Kconfing menu
> staging: iio: adc: ad7606: Add OF device ID table
> staging: iio: adc: ad7606: Use vendor prefix for DT properties
> staging: iio: adc: ad7606: Use find_closest() macro
> staging: iio: adc: ad7606: Use devm functions in probe
> staging: iio: adc: ad7606: Use wait-for-completion handler
> Staging:iio:adc:ad7606: Match parenthesis alignment
> staging:iio:ad7606: Add support for the ad7605-4
> staging:iio:ad7606: update structs with doc annotations
> staging:iio:ad7606: Remove incorrect kernel doc annotations
> staging:iio:ad7606: fix voltage scales
> staging: iio: adc: ad7606: fix function pointer parameter names missing.
> iio: ad9528: read clock-output-names from dt if available
> iio: ad9528: break clk registration into own function
> iio: adc: ad9371: Fix compilation in case CONFIG_OF is not defined
< arm64: dts: zynqmp-zcu102-rev10-adrv9375.dts: Add devicetree for AD9375
< iio: adc: ad9680: avoid duplicated error message (Sync with master)
> arm64: dts: zynqmp-zcu102-rev10-adrv9375.dts: Add devicetree for AD9375
> power: supply: adp5061: Fix a couple off by ones
< iio: adc: ad9361: Fix to prevent invalid RFBW setting during enable FIR
< iio: adc: adrv9009: Add missing FHM API to set the next hop frequency
> iio: adc: ad9361: Fix to prevent invalid RFBW setting during enable FIR
> iio: adc: adrv9009: Add missing FHM API to set the next hop frequency
> iio: dac: ad5686: Add support for AD5674R/AD5679R
> iio: dac: ad5686: Fix bit shift read register
> iio: adc: ad9680: maintain current sysref rate in case it's a fit
< iio: adc: ad9680: maintain current sysref rate in case it's a fit
< arm: dts: zynq-e310.dts: Fix VCRX_V1,V2 GPIO inversion
> iio:dac:ad5686: Add AD5310R support
> dmaengine: dmatest: use `buf_size` in all places of dmatestfunc
> dmaengine: dmatest: make DMA test selection dynamic
> .travis.yml: exclude xcomm_zynq & adi-4.14.0 from Travis-CI build
> arm: dts: zynq-e310.dts: Fix VCRX_V1,V2 GPIO inversion
> iio:dac:ad5686: Add AD5311R support
> iio:dac:ad5686: Add AD5681R/AD5682R/AD5683/AD5683R support
> iio:dac:ad5686: Add AD5691R/AD5692R/AD5693/AD5693R support
> iio:dac:ad5686: Add AD5671R/75R/94/94R/95R/96/96R support
> iio:dac:ad5686: Refactor the driver
> iio:dac:ad5686: Add AD5672R/76/76R/84R/86R support
> iio:dac:ad5686: Add support for AD5685R
> iio:dac:ad5686: Add support for various number of channels
> iio:dac:ad5686: Change license description
> iio:dac:ad5686: Style fixes no functional changes
> iio: adxl345: move null check for i2c id at start of probe
> iio: adxl345: Add support for the ADXL375
> mux: adgs1408: use the correct MODULE_LICENSE
> mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
> dt-bindings: mux: add adi,adgs1408
> dmaengine: dmatest: move DMA transaction start in own function
> dmaengine: dmatest: move DMA desc prep in own function
> dmaengine: dmatest: move test init sizes into function
> dmaengine: dmatest: unify DMA map code into function
> dmaengine: dmatest: wrap src & dst data into a struct
> iio: buffer-dmaengine: adjust `bytes_used` with residue info
> staging: iio: adc: ad7192: Add low_pass_3db_filter_frequency
> Revert "Revert "dmaengine: remove DMA_SG as it is dead code in kernel""
> staging: iio: adc: ad7192: Add clock output option
> staging: iio: adc: ad7192: Add clock for external clock reference
> staging: iio: adc: ad7192: fix external frequency setting
> iio: adc: ad7124: Align with upstream version
> dmaengine: dmatest: unmap data on a single code-path when xfer done
> dmaengine: dmatest: use dmaengine_terminate_sync() instead
> dmaengine: dmatest: move size checks earlier in function
< arch/arm64/configs/adi_zynqmp_defconfig: Add ADRV9008 firmware
> arch/arm64/configs/adi_zynqmp_defconfig: Add ADRV9008 firmware
Submodule hdl 401395c..28df754:
> axi_dmac: infer interrupt line for Xilinx projects
> Revert "axi_dmac: assert xfer_request only when ready"
> axi_ad9162: Add DDS_DISABLE to the core
> fmcomms11/zc706: Slightly over constrain the design
> axi_ad9162: Update the DDS instances
> fmcomms11: Initial commit
> adrv9371/daq2/daq3:kcu105: patch GTH3 CPLL parameters
Submodule buildroot 325c7b2..3af8648:
> Add Nios II support for ADI's platforms
> board: analogdevicesinc: microblaze -> common
> dropbear: Host - enable linking with the shared libraries
> zynq_{pluto,m2k,sidekiqz2}_defconfig: add host mtools dependency
> Revert "host-genimage: add host-mtools to dependency list"
> board/[pluto|m2k]/post-build.sh: Deploy all HTML files to /www for httpd
> board/pluto/S41network: Fix udhcpd restart PID file issue
> package: ad936x_ref_cal: add hash file with sha256 signatures
> Merge pull request #25 from analogdevicesinc/master-2019.02.2
> Merge pull request #27 from analogdevicesinc/rgetz-index.html-listcompiler
> package: busybox: remove leftover busybox-1.25.0.config
> Merge pull request #23 from analogdevicesinc/merge-pluto
> board/pluto: Remove references to nonexistent language html pages
> package: jesd204b_status: Add JESD204B Status Monitoring Utility
> Merge pull request #18 from analogdevicesinc/update-libiio-v018-v2
> package/libiio/libiio.mk: Update to Version 0.18
> linux: strip white-spaces from KERNEL_DTS_NAME
> adi_mb_defconfig: allow buildroot to override the system rootfs
> microblaze_adi_defconfig: include ADI kernel, ethtool, phy-tool & mii-diag
> microblaze_adi_rootfs_defconfig: split rootfs-only build
> board: adi: microblaze: Include SSH keys
> dropbear: add host dropbearkey
> Add MicroBlaze support for ADI's platforms
> package: libaio: Add MicroBlaze support
> Merge pull request #15 from analogdevicesinc/rgetz-m2k-html-updates
> configs/zynq_m2k_defconfig: Update gcc version for 2018.2 toolchain
Submodule u-boot-xlnx 89d0754..a2f86f3:
> Fixed variable definition separators for sidekiqz2
Signed-off-by: Michael Hennerich <[email protected]>
mhennerich
added a commit
that referenced
this issue
Jul 3, 2019
Submodule linux c2041af...387d584:
> iio: m2k-fabric: fix coding style issues
> iio: m2k-fabric: Merge m2k branch
> iio: m2k-trigger-ad: fix coding style issues
> iio: m2k-trigger-ad: Merge m2k branch
> iio: m2k-logic-analyzer: fix coding style issues
> iio: m2k-logic-analyzer: Merge m2k branch
> drivers: iio: remove adi,spi-3wire-enable & handling
> arch: arm{64},microblaze: use upstream/SPI's spi-3wire definition
> iio: adc: ad9963: fix codying style warnings
> iio: ad9963: Fix the info_mask_separate for the adc channel
> iio: adc: ad9963: Get m2k branch changes
> arm: dts: Add device trees for ADRV9008-1 and ADRV9008-2 on ZC706
> spi: spi-axi-engine: Fix buffer increment
> iio: m2k-dac: Fix checkpatch warnings
> iio: Add support for the dual channel M2K DAC interpolation core
> include: iio: buffer-dma: Include buffer_impl.h
> iio: include: ad9523: remove enum comments
> iio: ad9523: check and return on error when configuring channels
> travis: Added m2k build
> dtb: m2k: Fix dma controller nodes
> dtb: m2k: Add m2k device trees
> iio: adc: ad9963: Update Kconfig
> configs: arm: Added zynq_m2k_defconfig
> dts: zynq-zc706-adv7511-fmcomms11: Update AD9162 TPL address
> iio: adc: mykonos: mykonos: Add some sleep to relax this busy loop.
> drivers: iio: frequency: ad7192: Fix failed clocks warning
> dts:zynq-zc706-adv7511-ad9172-fmc-ebz.dts: fix TXEN gpios
> dts: adi-ad9172-fmc-ebz.dtsi: Change to Mode 4
> ad9172: fix multiplication for 32 bit systems
> arm: boot: dts: Add ad9172 device tree
> arm: configs: Add ad9172 configuration
> Replaced new const with a cast.
> Fix initial bank selection for IS25WP256D
> dmaengine: axi-dmac: remove old device-tree bindings support
> Documentation: devicetree: bindings: iio: frequency: hmc7044: Update
> iio: frequency: hmc7044: Add option to select the output-mux-mode
> include: dt-bindings: iio: frequency: hmc7044: Add dt-bindings include
> iio: hmc7044: Add read support for debugfs_reg_access
> iio: frequency: hmc7044: Disable all channels during initialization
> iio: frequency: hmc7044: Add support for channel coarse/fine delay
> iio: frequency: hmc7044: Add support for Pulse Generator Mode (SYSREF)
> iio: frequency: hmc7044: Add option to disable the high performace mode
> iio: adc: ad9371: Add support for RX or TX/ORx only configurations.
> iio: adc: mykonos: mykonos.c: Fix TX/OBsRX only operation
> staging: iio: adc: ad7192: Use read_avail for available attributes
> arch: microblaze: vcu118.dtsi: enable internal phy hack
> net: xilinx: axienet: add internal-phy auto-neg hack
> net: axienet: Fix double deregister of mdio
> arch: microblaze: vcu118.dtsi: enable 6-wire SGMII mode
> net: phy: dp83867: Add support for 6-wire mode in SGMII configuration
> net: phy: dp83867: Add binding for the CLK_OUT pin muxing option
> arch: microblaze: adi_mb_defconfig: enable TI DP83867 PHY driver
> arch: microblaze: dts: Add VCU118 device tree examples
> iio: jesd204: adxi_xcvr: Fix naming mismatch for GTH4
> iio: jesd204: Add support for GTY4
> dt-bindings: iio: adc: Add AD7616 ADC documentation
> iio: adc: ad7616: Add support for AD7616 ADC
> iio: adc: ad7606: Move oversampling options in chip info
> iio: adc: ad7768-1: Align with upstream version
> Merge pull request #353 from analogdevicesinc/master-xilinx-2018.3
> Documentation: devicetree: bindings: iio: frequency: adi,ad9172.txt: Add
> dts: adi-ad9172-fmc-ebz.dtsi: Add AD9172 device tree and config
> iio: frequency: cf_axi_dds: AD917x add support for different configurations
> iio: frequency: cf_axi_dds: [write|read]_raw forward to the converter
> iio: frequency: ad9172: Add AD9171/72/73/74/75/76 Dual 16-bit DAC driver
> iio: frequency: ad917x: Add AD936x API driver source
> clk: clk-adjustable-rate: clamp min and max rate to avoid overflows
> iio: jesd204: xilinx_transceiver: refclk use round closest
> net: xilinx: emaclite: add minimal ethtool ops
> net: xilinx: emaclite: add minimal ndo_do_ioctl hook
> ARM: dts: imageon-bridge: Set output mode to YCbCr 4:2:2
> media: imageon-loopback: call init before register
> iio: cf_axi_tdd: Typo fix
> iio: imu: adis16480: Validate the CRC when burst read function is used
> iio: imu: adis16480: Use the IIO_FLAGS channel to read diagnostic data
> iio: Implement flags channel type
> dt-bindings: iio: imu: Add ADIS16490 IMU documentation
> iio: imu: adis16480: Add support for ADIS16490
> input: adp5589: Add gpio_set_multiple interface
> iio: frequency: ad9523: sync with upstream
> arm: configs: zynq_xcomm_adv7511_defconfig: Enable ADR9009
> arm:dts:adrv9009: Make SPI addresses consistent
> arm: dts: zynq-zc706-adv7511-adrv9009.dts: update jesd204 node name
> arm: dts: adrv9009: Update default configuration
> arm: dts: adrv9009: Update tx-pa-protection-thresholds
> arm: dts: adrv9009: Enable dual observation channels
> iio: imu: adis16480: Add the option to enable/disable burst mode
> iio: imu: adis16480: Add support for burst read function
> iio: imu: adis: Add delay for burst function
> Revert "scatterlist: introduce sg_nents_for_dma() helper"
> dmaengine: axi-dmac: remove use of sg_nents_for_dma()
> dmaengine: axi-dmac: remove parantheses in if block
> iio: imu: adis16400: move adis16400.h into adis16400.c
> iio: imu: adis16400: rename adis16400_core.c -> adi16400.c
> iio: imu: adis16400: move burst logic to ADIS lib
> iio: imu: adis: generalize burst mode support
> iio: imu: adis16400: move trigger handler into adis16400_core
> staging: iio: adc: ad7192: Report error directly in ad7192_setup
> staging: iio: adc: ad7192: Convert platform data to DT properties
> staging: iio: adc: ad7192: Fix identation
> staging: iio: adc: ad7192: Use DT clock binding
> Revert "staging: iio: adc: ad7192: Added devicetree support."
> staging: iio: adc: ad7192: disable burnout currents on misconfig
> staging: iio: remove unnecessary parentheses
> staging: iio: adc: ad7192: use driver private lock to protect hardware state changes
> Revert "staging: iio: adc: ad7192: Add clock for external clock reference"
> Revert "staging: iio: adc: ad7192: Add clock output option"
> iio: dac: ad5758: Modifications for new revision
> Revert "Revert "Revert "dmaengine: remove DMA_SG as it is dead code in kernel"""
> arm: dts: adi-fmcomms11.dtsi: Fix location of fixed-factor-clock
> dmaengine: dma-axi-dmac: Fix cyclic transfers descriptors length
> dmaengine: dma-axi-dmac: Call callback for each period
> iio: imu: adis16480: Add support for external clock
> spi: spi-axi-engine: Fix buffer address incrementation
> iio: imu: adis16480: Align with upstream changes
> iio: adc: talise: Fix unused variable warnings
> iio: jesd204: axi_adxcvr: Fix PCORE version major
> clk: Revert "drivers/clk/clk: fix CLK_GET_RATE_NOCACHE"
> ASoC: adau1977: Add support for setting MICBIAS via DT
> ASoC: adau1977: Add MICBIAS example in DT bindings
> ASoC: adau1977: Fix reset-gpios typo
> ASoC: dt-bindings: add dt bindings for adau1977 audio codec
> staging: iio: ad7192: Fix ad7193 channel address
> iio: imu: adis16480: Add docs for ADIS16480 IMU
> iio: imu: adis16480: Add support for ADIS1649x family of devices
> iio: imu: adis16480: Treat temperature scale in a generic way
> iio: imu: adis16480: Add OF device ID table
> iio: imu: adis16480: Add support for configurable drdy indicator
> iio: imu: adis16480: Use the default data ready pin configuration
> clk: Fix clk_core_get_rate() warning
> iio: adc: ad6676: Fix warning
> iio: adc: ad9680: Fix warning
> iio: jesd204: axi_xcvr: Fix warnings
> arch: arm: update zynq_xcomm_adv7511_defconfig
> iio: adc: ad9361: Fix max filter HB rates and update the available attr.
> firmware/TaliseStream.bin: Update Talise stream
> iio: adc: adrv9009: Update for Filter Wizard Ver. 2.3
> firmware/Talise*: Update Firmware to ARM Revision: 6.0.2
> iio: adc: talise: Update Talise API version: 3.6.0.5
> iio: adc: talise: Remove unused files
> iio: jesd204: axi_xcvr: Add support for fpga info
> clk: clk-axi-clkgen: Add support for FPGA info
> fpga: adi-axi-common: Add common AXI register header
> arm: configs: zynq_pluto_defconfig: Enable USB_NET_CDCETHER and RNDIS_HOST
> README.md: reference wiki for building the kernel
> ci/travis: implement basic branch sync-ing mechanism for master
> ci/travis: remove tracing
> drivers: staging: ad9834: sync to upstreamed versions
> microblaze: dts: Remove the entries for the internal PHYs
> microblaze: dts: Add support for the base design projects
> net: ethernet: xilinx: Revert ADI's fixes
> dts: adi-adrv9371: Fix the previous commit
> dmaengine: xilinx_dma: sync driver back to Xilinx's version
> Revert "dmaengine: xilinx_dma: Move enum xdma_ip_type to driver file"
> arch: remove XILINX_DMA Kconfig symbols from ADI defconfigs
> arch: arm: zynq-zc706-imageon.dts: drop file
> arch: arm: zynq-zed-adv7511-pmod-ad1-da1.dts: include zed base dt
> drm: adi_axi_hdmi: compile Xilinx DMA logic only if driver is enabled
> staging: iio: frequency: ad9833: Load clock using clock framework
> staging: iio: frequency: ad9833: Get frequency value statically
> arch: arm64: update adi_zynqmp_defconfig
> iio: adc: ad9361: Fix bug in ad9361_gt_bin_read()
> iio: adc: ad9361: Fix open brace placement
> spi: spi-axi-engine: fix write buffer value to register
> iio: adc: ad400x: Add offset mask
> iio: adc: ad400x: Fix register read
> iio: frequency: ad9528: Fix device tree readings for missing attributes
> iio: frequency: ad9528: Fix PLL1_CTRL bit definition
> dt-bindings: iio: adc: Add AD7606B ADC documentation
> iio: adc: ad7606: Add support for AD7606B ADC
> iio: adc: ad7606: Rework *_avail attributes in a generic way
< arm: configs: zynq_pluto_defconfig: Enable ext4 filesystem support
> README.md: add our own readme that should be picked up by the Github markdown engine
> iio: adc: ad7768-1: Add support for setting the sampling frequency
> dt-bindings: iio: adc: Add docs for AD7768-1
> iio: adc: Add AD7768-1 ADC basic support
> dt-bindings: iio: adc: Add docs for AD7606 ADC
> staging: iio: adc: ad7606: Move out of staging
> staging: iio: adc: ad7606: Misc style fixes (no functional change)
> staging: iio: adc: ad7606: Add support for threaded irq
> staging: iio: adc: ad7606: Use SPDX identifier
> staging: iio: adc: ad7606: Simplify the Kconfing menu
> staging: iio: adc: ad7606: Add OF device ID table
> staging: iio: adc: ad7606: Use vendor prefix for DT properties
> staging: iio: adc: ad7606: Use find_closest() macro
> staging: iio: adc: ad7606: Use devm functions in probe
> staging: iio: adc: ad7606: Use wait-for-completion handler
> Staging:iio:adc:ad7606: Match parenthesis alignment
> staging:iio:ad7606: Add support for the ad7605-4
> staging:iio:ad7606: update structs with doc annotations
> staging:iio:ad7606: Remove incorrect kernel doc annotations
> staging:iio:ad7606: fix voltage scales
> staging: iio: adc: ad7606: fix function pointer parameter names missing.
> iio: ad9528: read clock-output-names from dt if available
> iio: ad9528: break clk registration into own function
> iio: adc: ad9371: Fix compilation in case CONFIG_OF is not defined
< arm64: dts: zynqmp-zcu102-rev10-adrv9375.dts: Add devicetree for AD9375
< iio: adc: ad9680: avoid duplicated error message (Sync with master)
> arm64: dts: zynqmp-zcu102-rev10-adrv9375.dts: Add devicetree for AD9375
> power: supply: adp5061: Fix a couple off by ones
< iio: adc: ad9361: Fix to prevent invalid RFBW setting during enable FIR
< iio: adc: adrv9009: Add missing FHM API to set the next hop frequency
> iio: adc: ad9361: Fix to prevent invalid RFBW setting during enable FIR
> iio: adc: adrv9009: Add missing FHM API to set the next hop frequency
> iio: dac: ad5686: Add support for AD5674R/AD5679R
> iio: dac: ad5686: Fix bit shift read register
> iio: adc: ad9680: maintain current sysref rate in case it's a fit
< iio: adc: ad9680: maintain current sysref rate in case it's a fit
< arm: dts: zynq-e310.dts: Fix VCRX_V1,V2 GPIO inversion
> iio:dac:ad5686: Add AD5310R support
> dmaengine: dmatest: use `buf_size` in all places of dmatestfunc
> dmaengine: dmatest: make DMA test selection dynamic
> .travis.yml: exclude xcomm_zynq & adi-4.14.0 from Travis-CI build
> arm: dts: zynq-e310.dts: Fix VCRX_V1,V2 GPIO inversion
> iio:dac:ad5686: Add AD5311R support
> iio:dac:ad5686: Add AD5681R/AD5682R/AD5683/AD5683R support
> iio:dac:ad5686: Add AD5691R/AD5692R/AD5693/AD5693R support
> iio:dac:ad5686: Add AD5671R/75R/94/94R/95R/96/96R support
> iio:dac:ad5686: Refactor the driver
> iio:dac:ad5686: Add AD5672R/76/76R/84R/86R support
> iio:dac:ad5686: Add support for AD5685R
> iio:dac:ad5686: Add support for various number of channels
> iio:dac:ad5686: Change license description
> iio:dac:ad5686: Style fixes no functional changes
> iio: adxl345: move null check for i2c id at start of probe
> iio: adxl345: Add support for the ADXL375
> mux: adgs1408: use the correct MODULE_LICENSE
> mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
> dt-bindings: mux: add adi,adgs1408
> dmaengine: dmatest: move DMA transaction start in own function
> dmaengine: dmatest: move DMA desc prep in own function
> dmaengine: dmatest: move test init sizes into function
> dmaengine: dmatest: unify DMA map code into function
> dmaengine: dmatest: wrap src & dst data into a struct
> iio: buffer-dmaengine: adjust `bytes_used` with residue info
> staging: iio: adc: ad7192: Add low_pass_3db_filter_frequency
> Revert "Revert "dmaengine: remove DMA_SG as it is dead code in kernel""
> staging: iio: adc: ad7192: Add clock output option
> staging: iio: adc: ad7192: Add clock for external clock reference
> staging: iio: adc: ad7192: fix external frequency setting
> iio: adc: ad7124: Align with upstream version
> dmaengine: dmatest: unmap data on a single code-path when xfer done
> dmaengine: dmatest: use dmaengine_terminate_sync() instead
> dmaengine: dmatest: move size checks earlier in function
< arch/arm64/configs/adi_zynqmp_defconfig: Add ADRV9008 firmware
> arch/arm64/configs/adi_zynqmp_defconfig: Add ADRV9008 firmware
Submodule hdl 401395c..28df754:
> axi_dmac: infer interrupt line for Xilinx projects
> Revert "axi_dmac: assert xfer_request only when ready"
> axi_ad9162: Add DDS_DISABLE to the core
> fmcomms11/zc706: Slightly over constrain the design
> axi_ad9162: Update the DDS instances
> fmcomms11: Initial commit
> adrv9371/daq2/daq3:kcu105: patch GTH3 CPLL parameters
Submodule buildroot 3af8648..b31cc4d:
> Merge pull request #32 from analogdevicesinc/add-gitignore
> Add Nios II support for ADI's platforms
> board: analogdevicesinc: microblaze -> common
> dropbear: Host - enable linking with the shared libraries
> zynq_{pluto,m2k,sidekiqz2}_defconfig: add host mtools dependency
> Revert "host-genimage: add host-mtools to dependency list"
> board/[pluto|m2k]/post-build.sh: Deploy all HTML files to /www for httpd
> board/pluto/S41network: Fix udhcpd restart PID file issue
> package: ad936x_ref_cal: add hash file with sha256 signatures
> Merge pull request #25 from analogdevicesinc/master-2019.02.2
> Merge pull request #27 from analogdevicesinc/rgetz-index.html-listcompiler
> package: busybox: remove leftover busybox-1.25.0.config
> Merge pull request #23 from analogdevicesinc/merge-pluto
> board/pluto: Remove references to nonexistent language html pages
> package: jesd204b_status: Add JESD204B Status Monitoring Utility
> Merge pull request #18 from analogdevicesinc/update-libiio-v018-v2
> package/libiio/libiio.mk: Update to Version 0.18
> linux: strip white-spaces from KERNEL_DTS_NAME
> adi_mb_defconfig: allow buildroot to override the system rootfs
> microblaze_adi_defconfig: include ADI kernel, ethtool, phy-tool & mii-diag
> microblaze_adi_rootfs_defconfig: split rootfs-only build
> board: adi: microblaze: Include SSH keys
> dropbear: add host dropbearkey
> Add MicroBlaze support for ADI's platforms
> package: libaio: Add MicroBlaze support
> Merge pull request #15 from analogdevicesinc/rgetz-m2k-html-updates
> configs/zynq_m2k_defconfig: Update gcc version for 2018.2 toolchain
Submodule u-boot-xlnx 89d0754..a2f86f3:
> Fixed variable definition separators for sidekiqz2
Signed-off-by: Michael Hennerich <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Instead "check the latest version" , it should be "download the latest version", or "Download version xxx".
The text was updated successfully, but these errors were encountered: