Helpful Information about Printer

Helpful g-code command:

g0/1 - перемещение

g26 - test level of bed. Without screen add R1

g28 - Homing for axi

g29 - bed leveling

m17 - enable step driver

m92 - set steps per init

m114 - get current position

m115 - get firm version

m119 - get endstops status

m302 p1 - disable cold extrution

m500 - write params to EEprom

m501 - read params from EEprom

m502 - resotre params to config value

m503 - report curent params from Firmware

m504 - validate eeprom

After change firmware:

m502, m500, rest :)