THIS REPO HAS MOVED

See the new home at https://github.com/nav-inc/pomegranate

Pomegranate

Pomegranate is a tool for creating and running schema migrations for the Postgres database, emphasizing safety and transparency. All migrations are run in transactions that will be automatically rolled back if an exception is raised, ensuring the database is not left in a half-migrated state. Further, the .sql migration files created by Pomegranate are the exact SQL that will be run at migration time; you will get the same result whether you call pmg forward, or feed a forward.sql file to psql, or attach the forward.sql file to a change control ticket and have your DBA run it. Postgres's best-in-class support for transactional DDL makes this safety and transparency possible.

Go projects can also use pmg to convert their .sql migrations into a migrations.go file that will be compiled into their project and run with the pomegranate package.

Installation

For now, pomegranate has to be built from source:

$ go install github.com/btubbs/pomegranate/pmg

Usage

You can use Pomegranate in two ways:

1. As a standalone command line tool (pmg).
2. As a library (github.com/btubbs/pomegranate) in your own Go project.

Using pmg

Create initial migration

Use the pmg init command to create your first migration, which will be responsible for creating the migration_state table. It will create the migration in the current directory, or you can specify a different one with the --dir option. You can also use the --ts option to use timestamps.

$ pmg init
Migration stubs written to 00001_init

The 00001_init directory should now exist, and contain forward.sql and backward.sql files. You don't need to edit these initial migrations.

Create more migrations

Migrations containing your own custom changes should be made with the pmg new command:

$ pmg new add_customers_table
Migration stubs written to 00002_add_customers_table

Note that the 00002 prefix has been prepended to the name you provided. Migrations are run in the order they appear in the file system. The auto numbering ensures that this ordering is consistent. You can also use the --ts option to use timestamps.

As with init, the new command creates forward.sql and backward.sql files. Unlike init, these are just stubs. You will need to edit these files and add your own commands (e.g. CREATE TABLE...). The stub files try to make it obvious where your commands should go:

$ cat 00002_add_customers_table/forward.sql 
BEGIN;
-- vvvvvvvv PUT FORWARD MIGRATION CODE BELOW HERE vvvvvvvv

SELECT 1 / 0; -- delete this line

-- ^^^^^^^^ PUT FORWARD MIGRATION CODE ABOVE HERE ^^^^^^^^
INSERT INTO migration_state(name) VALUES ('00002_add_customers_table');
COMMIT;

The SELECT 1 / 0; line in the stub is a safeguard against accidentally running an empty migration. You should replace it with your own commands.

Be sure to also add the necessary commands to backward.sql to safely roll back the changes in forward.sql, in case you decide they were a bad idea.

Run migrations

Use the forward command to run all migrations not yet recorded in the migration_state table. Pomegranate will connect to the database specified in the DATABASE_URL environment variable, or you can supply a database URL with the --dburl option.

$ pmg forward
Connecting to database 'readme' on host ''
Forward migrations that will be run:
00001_init
00002_add_customers_table
Run these migrations? (y/n) y
Running 00001_init... Success!
Running 00002_add_customers_table... Success!
Done

If you don't want to run all the migrations, you can use the forwardto command instead:

$ pmg forwardto 00001_init
Connecting to database 'readme' on host ''
Forward migrations that will be run:
00001_init
Run these migrations? (y/n) y
Running 00001_init... Success!
Done

If a migration fails, DON'T PANIC. Your database should still be in the same state it was in before that forward.sql script was executed. (Unless you put commands outside the BEGIN and COMMIT lines.) Fix the problem in your script, and run pmg forward again.

Roll back migrations

Rolling back is done with the backwardto command. This will run the backward.sql file for all migrations that have already been run, up to and including the one specified in the command.

$ pmg backwardto 00002_add_customers_table
Connecting to database 'readme' on host ''
Backward migrations that will be run:
00002_add_customers_table
Run these migrations? (y/n) y
Running 00002_add_customers_table... Success!
Done

Unlike going forward, pmg does NOT provide a backward command that will migrate all the way back. You must use backwardto and provide an explicit migration name.

View migration state

The state command will show all migrations recorded in the migration_state table:

$ pmg state 
Connecting to database 'readme' on host ''
NAME       | WHEN                                 | WHO
00001_init | 2018-02-11 20:48:51.827197 -0700 MST | postgres

Using the pomegranate package in Go

If your project is written in Go, Pomegranate may also be integrated into your project so that migrations can be included inside your binary program and executed by it.

The full public interface is documented at https://godoc.org/github.com/btubbs/pomegranate.

Ingest migrations

Use the pmg ingest command to turn your .sql migrations into a .go file that can be compiled into your project. Run it in the same directory as your migrations, or use the --dir option.

$ pmg ingest
Migrations written to migrations.go

By default, migrations are written to migrations.go with package migrations at the top. You can customize the name of the .go file and the package name inside it with the --gofile and --package options, respectively.

The file created will have an All variable in it containing all your migrations.

The file will also have a //go:generate... tag inside it that will allow to to re-generate your .go file by running go generate in your migrations directory.

Run migrations from your code

Use Pomegranate's MigrateForwardTo function to run migrations forward. It takes four arguments:

• the name that you want to migrate to
• a DB connection
• your ingested migrations
• a boolean flag indicating whether to ask for "y/n" confirmation on the command line

pomegranate.MigrateForwardTo(name, db, migrations.All, true)

MigrateBackwardTo and GetMigrationState functions are also available.

A complete example

Here's the complete file layout of an extremely simple project that uses Pomegranate:

$ tree
.
├── migrations
│   ├── 00001_init
│   │   ├── backward.sql
│   │   └── forward.sql
│   ├── 00002_add_customers_table
│   │   ├── backward.sql
│   │   └── forward.sql
│   └── 00003_add_address_column
│       ├── backward.sql
│       └── forward.sql
└── my_awesome_app.go

In that example, my_awesome_app.go looks like this:

package main

import (
  "fmt"
  "os"

  "github.com/btubbs/my_awesome_app/migrations"
  "github.com/btubbs/pomegranate"
)

func main() {
  db, err := pomegranate.Connect(
    "postgres://postgres@/awesome_app?sslmode=disable")
  if err != nil {
    fmt.Println(err)
    os.Exit(1)
  }
  // passing an empty string as name will run to the latest migration
  pomegranate.MigrateForwardTo("", db, migrations.All, true)
}

Given the above, you can build my_awesome_app like so:

$ cd migrations
$ pmg ingest
Migrations written to migrations.go
$ cd ..
$ go build

And run it like so:

$ psql -c "CREATE DATABASE awesome_app"
CREATE DATABASE
$ ./my_awesome_app 
Connecting to database 'awesome_app' on host ''
Forward migrations that will be run:
00001_init
00002_add_customers_table
00003_add_address_column
Run these migrations? (y/n) y
Running 00001_init... Success!
Running 00002_add_customers_table... Success!
Running 00003_add_address_column... Success!