Regression and Setups

Configuration file

configuration file per setup can be found here

The configuration file includes cores, loopback, test performance results etc

trex-08 example

trex:
  hostname       : csi-trex-08
  cores          : 7
  modes          : ['loopback']
  trex_add_args  : '--x710-reset-threshold 10000000'

Hardware Regression setups

Table 1. Regression setups

Setup	Bare metal	OS	NIC(s)	Description
kiwi-02	+	Fedora 18	2 x ixgbe(2x2)	ESP200 ASR1K
trex-04	ESXi 5.5	Ubuntu 14	2 x VMXNET3	Loopback, Multi-RX-Queue
trex-06	ESXi 5.5	Ubuntu 16	2 x E1000	Loopback
trex-07	+	CentOS 7.6	1 x Connect4	Loopback
trex-08	+	CentOS 7.4	2 x Intel 40G (2x2)	Loopback, special XL710 features (hw counters)
trex-09	+	CentOS 7.4	2 x X710 (2x4)	Loopback
trex-11	ESXi 5.5	Ubuntu 14	1 x VIC 40G VIC1835 2QSFP+	Loopback
trex-12	+	Ubuntu 16	3 x I350(3x4)	Loopback
trex-16	ESXi 5.5	Fedora 23	veth pair	Loopback vSwitch
trex-17	ESXi 5.5	Fedora 21	2 x E1000	Loopback vSwitch
trex-14	+	Ubuntu 14	1 x igbe (1x2)	ASR1001x
trex-19	+	CentOS 7.6	1 x CX-5 (1x2)	Loopback
trex-21	KVM	CentOS 7.3	4 x IXGBE VF	2 VFs from first interface in loopback, 1 from first with 1 from second
trex-22	KVM	CentOS 7.3	4 x XL710 VF	Multi-RX-Queue,2 VFs from first interface in loopback, 1 from first with 1 from second
trex-23	KVM	CentOS 7.6	4 x Connect4 VF	2 VFs from first interface in loopback, 1 from first with 1 from second
trex-24	Proxmox	Ubuntu 16	2 x Virtio	Loopback
trex-25	+	CentOS 7.6	2 x I350 (2x4)	ASR1004
trex-41	+	CentOS 7.3	2 x Napatech 100G (2x1)	Loopback

Notes

1. trex-08/09 test special XL710 features (HW counters)

2. kiwi-02/14/25 test NAT/FW/NBAR against TRex image (those test can’t run in loopback setups)