Update IRac.cpp

Change argument order and remove unused parameters.
Fix a doxygen error
Fix a typo/error in the Ptr comment.

src/IRac.cpp

@@ -1279,29 +1279,21 @@ void IRac::fujitsu(IRFujitsuAC *ac, const fujitsu_ac_remote_model_t model,
 #endif  // SEND_FUJITSU_AC
 #if SEND_FUNIKI
 /// Send a Funiki A/C message with the supplied settings.
-/// @param[in, out] ac A Ptr to an IRFujitsuAC object to use.
+/// @param[in, out] ac A Ptr to an IRFunikiAC object to use.
 /// @param[in] model The A/C model to use.
 /// @param[in] on The power setting.
 /// @param[in] mode The operation mode setting.
 /// @param[in] celsius Temperature units. True is Celsius, False is Fahrenheit.
 /// @param[in] degrees The temperature setting in degrees.
 /// @param[in] fan The speed setting for the fan.
 /// @param[in] swingv The vertical swing setting.
-/// @param[in] swingh The horizontal swing setting.
-/// @param[in] clock The clock setting.
-/// @param[in] iFeel Whether to enable iFeel (remote temp) mode on the A/C unit.
-/// @param[in] turbo Run the device in turbo/powerful mode.
-/// @param[in] econo Run the device in economical mode.
-/// @param[in] light Turn on the LED/Display mode.
-/// @param[in] clean Turn on the self-cleaning mode. e.g. Mould, dry filters etc
 /// @param[in] sleep Nr. of minutes for sleep mode. <= 0 is Off, > 0 is on.
+/// @param[in] clock The clock setting.
 void IRac::funiki(IRFunikiAC *ac, const funiki_ac_remote_model_t model,
                 const bool on, const stdAc::opmode_t mode, const bool celsius,
                 const float degrees, const stdAc::fanspeed_t fan,
-                const stdAc::swingv_t swingv, const stdAc::swingh_t swingh,
-                const int16_t clock,
-                const bool iFeel, const bool turbo, const bool econo,
-                const bool light, const bool clean, const int16_t sleep) {
+                const stdAc::swingv_t swingv,
+                const int16_t sleep, const int16_t clock) {
   ac->begin();
   ac->setModel(model);
   ac->setPower(on);
@@ -1310,19 +1302,14 @@ void IRac::funiki(IRFunikiAC *ac, const funiki_ac_remote_model_t model,
   ac->setFan(ac->convertFan(fan));
   ac->setSwingVertical(swingv == stdAc::swingv_t::kAuto,  // Set auto flag.
                        ac->convertSwingV(swingv));
-  ac->setSleep(sleep >= 0);  // Sleep on this A/C is either on or off.
-  // No Econo setting available.
-  (void)(swingh);
-  (void)(iFeel);
-  (void)(turbo);
-  (void)(econo);
-  (void)(light);
-  (void)(clean);
-
+  // No Horizontal Swing setting available.
+  // No Turbo setting available.
+  // No Light setting available.
   // No Filter setting available.
+  // No Clean setting available.
   // No Beep setting available.
   // No Quiet setting available.
-  // No Clock setting available.
+  ac->setSleep(sleep >= 0);  // Sleep on this A/C is either on or off.
   if (clock >= 0) ac->setClock(clock);
   ac->send();
 }
@@ -3300,11 +3287,10 @@ bool IRac::sendAc(const stdAc::state_t desired, const stdAc::state_t *prev) {
     case FUNIKI:
     {
       IRFunikiAC ac(_pin, (funiki_ac_remote_model_t)send.model, _inverted,
-                  _modulation);
+                    _modulation);
       funiki(&ac, (funiki_ac_remote_model_t)send.model, send.power, send.mode,
-           send.celsius, send.degrees, send.fanspeed, send.swingv, send.swingh,
-           send.clock,
-           send.turbo, send.econo, send.light, send.clean, send.sleep);
+             send.celsius, send.degrees, send.fanspeed, send.swingv,
+             send.sleep, send.clock);
       break;
     }
 #endif  // SEND_FUNIKI