Local testing via Makefile & Docker (MarlinFirmware#19981)

Makefile

@@ -27,6 +27,8 @@ tests-single-ci:
 
 tests-single-local:
 	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local" ; return 1; fi
+	chmod +x buildroot/bin/*
+	chmod +x buildroot/tests/*
 	export PATH=./buildroot/bin/:./buildroot/tests/:${PATH} \
 	  && export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
 	  && run_tests . $(TEST_TARGET) "$(ONLY_TEST)"
@@ -38,6 +40,8 @@ tests-single-local-docker:
 .PHONY: tests-single-local-docker
 
 tests-all-local:
+	chmod +x buildroot/bin/*
+	chmod +x buildroot/tests/*
 	export PATH=./buildroot/bin/:./buildroot/tests/:${PATH} \
 	  && export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
 	  && for TEST_TARGET in $$(./get_test_targets.py) ; do echo "Running tests for $$TEST_TARGET" ; run_tests . $$TEST_TARGET ; done

README.md

@@ -10,60 +10,102 @@
 Additional documentation can be found at the [Marlin Home Page](https://marlinfw.org/).
 Please test this firmware and let us know if it misbehaves in any way. Volunteers are standing by!
 
-# Last release of Marlin BugFix 2.0.8 for Delta FLSun QQS-Pro (motherboard HISPEED).
+## Marlin 2.0 Bugfix Branch
 
-- 20201122 Add options in QQS_Config (BMG&BMGmini (step), Flying Extruder)
-- 20201022 Updated Marlin BugFix 2.0.8.1 for FLSun QQS-Pro with A4988 and TMC220x (Easy to configure by "QQS_Config.h" file)**
-- Integration in the Marlin firmware of the HISPEED motherboard and configuration files for the QQS-Pro.
-- Fixed Deploy/Stow ZProbe
-- Fixed for users using E3Dv6 hotend
-- Others TIPS(QQS_Config.h, Quick calibration, Menu management of NeoPixel leds, etc).
+__Not for production use. Use with caution!__
 
+Marlin 2.0 takes this popular RepRap firmware to the next level by adding support for much faster 32-bit and ARM-based boards while improving support for 8-bit AVR boards. Read about Marlin's decision to use a "Hardware Abstraction Layer" below.
 
-20201001 Updated Marlin 2.0.7 for FLSun QQ-S with A4988 and TMC220x mode _UART and _StandAlone.
+This branch is for patches to the latest 2.0.x release version. Periodically this branch will form the basis for the next minor 2.0.x release.
 
-20200830 Updated Marlin 2.0.6 for FLSun QQ-S with A4988 and TMC2208_StandAlone.
+Download earlier versions of Marlin on the [Releases page](https://github.com/MarlinFirmware/Marlin/releases).
 
-20200827 Updated Marlin 2.0.6 for FLSun QQ-S with A4988.
+## Building Marlin 2.0
 
-20200815 Updated Marlin 2.0.6 for FLSun QQ-S.
+To build Marlin 2.0 you'll need [Arduino IDE 1.8.8 or newer](https://www.arduino.cc/en/main/software) or [PlatformIO](https://docs.platformio.org/en/latest/ide.html#platformio-ide). We've posted detailed instructions on [Building Marlin with Arduino](https://marlinfw.org/docs/basics/install_arduino.html) and [Building Marlin with PlatformIO for ReArm](https://marlinfw.org/docs/basics/install_rearm.html) (which applies well to other 32-bit boards).
 
-Thanks to [Anders Salhman](https://github.com/AndersSahlman) & [Martin Carlsson](https://github.com/orecus) for their work and inspiration.
+## Hardware Abstraction Layer (HAL)
 
-## I am not responsible for any Damage done do your Printer by using this. Using anything else than stock firmware requieres quite some knowlege.
+Marlin 2.0 introduces a layer of abstraction so that all the existing high-level code can be built for 32-bit platforms while still retaining full 8-bit AVR compatibility. Retaining AVR compatibility and a single code-base is important to us, because we want to make sure that features and patches get as much testing and attention as possible, and that all platforms always benefit from the latest improvements.
 
-## This is my experimental Marlin firmware on Delta FLSun QQ-S 
+### Current HALs
 
-## Building Marlin 2.0
+  #### AVR (8-bit)
+
+  board|processor|speed|flash|sram|logic|fpu
+  ----|---------|-----|-----|----|-----|---
+  [Arduino AVR](https://www.arduino.cc/)|ATmega, ATTiny, etc.|16-20MHz|64-256k|2-16k|5V|no
+
+  #### DUE
+
+  boards|processor|speed|flash|sram|logic|fpu
+  ----|---------|-----|-----|----|-----|---
+  [Arduino Due](https://www.arduino.cc/en/Guide/ArduinoDue), [RAMPS-FD](https://www.reprap.org/wiki/RAMPS-FD), etc.|[SAM3X8E ARM-Cortex M3](https://www.microchip.com/wwwproducts/en/ATsam3x8e)|84MHz|512k|64+32k|3.3V|no
+
+  #### ESP32
+
+  board|processor|speed|flash|sram|logic|fpu
+  ----|---------|-----|-----|----|-----|---
+  [ESP32](https://www.espressif.com/en/products/hardware/esp32/overview)|Tensilica Xtensa LX6|160-240MHz variants|---|---|3.3V|---
+
+  #### LPC1768 / LPC1769
+
+  boards|processor|speed|flash|sram|logic|fpu
+  ----|---------|-----|-----|----|-----|---
+  [Re-ARM](https://www.kickstarter.com/projects/1245051645/re-arm-for-ramps-simple-32-bit-upgrade)|[LPC1768 ARM-Cortex M3](https://www.nxp.com/products/microcontrollers-and-processors/arm-based-processors-and-mcus/lpc-cortex-m-mcus/lpc1700-cortex-m3/512kb-flash-64kb-sram-ethernet-usb-lqfp100-package:LPC1768FBD100)|100MHz|512k|32+16+16k|3.3-5V|no
+  [MKS SBASE](https://reprap.org/forum/read.php?13,499322)|LPC1768 ARM-Cortex M3|100MHz|512k|32+16+16k|3.3-5V|no
+  [Selena Compact](https://github.com/Ales2-k/Selena)|LPC1768 ARM-Cortex M3|100MHz|512k|32+16+16k|3.3-5V|no
+  [Azteeg X5 GT](https://www.panucatt.com/azteeg_X5_GT_reprap_3d_printer_controller_p/ax5gt.htm)|LPC1769 ARM-Cortex M3|120MHz|512k|32+16+16k|3.3-5V|no
+  [Smoothieboard](https://reprap.org/wiki/Smoothieboard)|LPC1769 ARM-Cortex M3|120MHz|512k|64k|3.3-5V|no
+
+  #### SAMD51
 
-To build Marlin 2.0 you'll need [Arduino IDE 1.8.8 or newer](https://www.arduino.cc/en/main/software) or [PlatformIO](http://docs.platformio.org/en/latest/ide.html#platformio-ide). Detailed build and install instructions are posted at:
+  boards|processor|speed|flash|sram|logic|fpu
+  ----|---------|-----|-----|----|-----|---
+  [Adafruit Grand Central M4](https://www.adafruit.com/product/4064)|[SAMD51P20A ARM-Cortex M4](https://www.microchip.com/wwwproducts/en/ATSAMD51P20A)|120MHz|1M|256k|3.3V|yes
 
-  - [Installing Marlin (Arduino)](http://marlinfw.org/docs/basics/install_arduino.html)
-  - [Installing Marlin (VSCode)](http://marlinfw.org/docs/basics/install_platformio_vscode.html).
+  #### STM32F1
 
-### Supported Platforms
+  boards|processor|speed|flash|sram|logic|fpu
+  ----|---------|-----|-----|----|-----|---
+  [Arduino STM32](https://github.com/rogerclarkmelbourne/Arduino_STM32)|[STM32F1](https://www.st.com/en/microcontrollers-microprocessors/stm32f103.html) ARM-Cortex M3|72MHz|256-512k|48-64k|3.3V|no
+  [Geeetech3D GTM32](https://github.com/Geeetech3D/Diagram/blob/master/Rostock301/Hardware_GTM32_PRO_VB.pdf)|[STM32F1](https://www.st.com/en/microcontrollers-microprocessors/stm32f103.html) ARM-Cortex M3|72MHz|256-512k|48-64k|3.3V|no
 
-  Platform|MCU|Example Boards
-  --------|---|-------
-  [Arduino AVR](https://www.arduino.cc/)|ATmega|RAMPS, Melzi, RAMBo
-  [Teensy++ 2.0](http://www.microchip.com/wwwproducts/en/AT90USB1286)|AT90USB1286|Printrboard
-  [Arduino Due](https://www.arduino.cc/en/Guide/ArduinoDue)|SAM3X8E|RAMPS-FD, RADDS, RAMPS4DUE
-  [LPC1768](http://www.nxp.com/products/microcontrollers-and-processors/arm-based-processors-and-mcus/lpc-cortex-m-mcus/lpc1700-cortex-m3/512kb-flash-64kb-sram-ethernet-usb-lqfp100-package:LPC1768FBD100)|ARM® Cortex-M3|MKS SBASE, Re-ARM, Selena Compact
-  [LPC1769](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc1700-cortex-m3/512kb-flash-64kb-sram-ethernet-usb-lqfp100-package:LPC1769FBD100)|ARM® Cortex-M3|Smoothieboard, Azteeg X5 mini, TH3D EZBoard
-  [STM32F103](https://www.st.com/en/microcontrollers-microprocessors/stm32f103.html)|ARM® Cortex-M3|Malyan M200, GTM32 Pro, MKS Robin, BTT SKR Mini
-  [STM32F401](https://www.st.com/en/microcontrollers-microprocessors/stm32f401.html)|ARM® Cortex-M4|ARMED, Rumba32, SKR Pro, Lerdge, FYSETC S6
-  [STM32F7x6](https://www.st.com/en/microcontrollers-microprocessors/stm32f7x6.html)|ARM® Cortex-M7|The Borg, RemRam V1
-  [SAMD51P20A](https://www.adafruit.com/product/4064)|ARM® Cortex-M4|Adafruit Grand Central M4
-  [Teensy 3.5](https://www.pjrc.com/store/teensy35.html)|ARM® Cortex-M4|
-  [Teensy 3.6](https://www.pjrc.com/store/teensy36.html)|ARM® Cortex-M4|
+  #### STM32F4
 
-## Submitting Changes
+  boards|processor|speed|flash|sram|logic|fpu
+  ----|---------|-----|-----|----|-----|---
+  [STEVAL-3DP001V1](https://www.st.com/en/evaluation-tools/steval-3dp001v1.html)|[STM32F401VE Arm-Cortex M4](https://www.st.com/en/microcontrollers-microprocessors/stm32f401ve.html)|84MHz|512k|64+32k|3.3-5V|yes
 
-- Submit **Bug Fixes** as Pull Requests to the ([bugfix-2.0.x](https://github.com/MarlinFirmware/Marlin/tree/bugfix-2.0.x)) branch.
-- Follow the [Coding Standards](http://marlinfw.org/docs/development/coding_standards.html) to gain points with the maintainers.
-- Please submit your questions and concerns to the [Issue Queue](https://github.com/MarlinFirmware/Marlin/issues).
+  #### Teensy++ 2.0
 
-## Marlin Support
+  boards|processor|speed|flash|sram|logic|fpu
+  ----|---------|-----|-----|----|-----|---
+  [Teensy++ 2.0](https://www.microchip.com/wwwproducts/en/AT90USB1286)|[AT90USB1286](https://www.microchip.com/wwwproducts/en/AT90USB1286)|16MHz|128k|8k|5V|no
+
+  #### Teensy 3.1 / 3.2
+
+  boards|processor|speed|flash|sram|logic|fpu
+  ----|---------|-----|-----|----|-----|---
+  [Teensy 3.2](https://www.pjrc.com/store/teensy32.html)|[MK20DX256VLH7](https://www.mouser.com/ProductDetail/NXP-Freescale/MK20DX256VLH7) ARM-Cortex M4|72MHz|256k|32k|3.3V-5V|yes
+
+  #### Teensy 3.5 / 3.6
+
+  boards|processor|speed|flash|sram|logic|fpu
+  ----|---------|-----|-----|----|-----|---
+  [Teensy 3.5](https://www.pjrc.com/store/teensy35.html)|[MK64FX512VMD12](https://www.mouser.com/ProductDetail/NXP-Freescale/MK64FX512VMD12) ARM-Cortex M4|120MHz|512k|192k|3.3-5V|yes
+  [Teensy 3.6](https://www.pjrc.com/store/teensy36.html)|[MK66FX1M0VMD18](https://www.mouser.com/ProductDetail/NXP-Freescale/MK66FX1M0VMD18) ARM-Cortex M4|180MHz|1M|256k|3.3V|yes
+
+  #### Teensy 4.0 / 4.1
+
+  boards|processor|speed|flash|sram|logic|fpu
+  ----|---------|-----|-----|----|-----|---
+  [Teensy 4.0](https://www.pjrc.com/store/teensy40.html)|[IMXRT1062DVL6A](https://www.mouser.com/new/nxp-semiconductors/nxp-imx-rt1060-crossover-processor/) ARM-Cortex M7|600MHz|1M|2M|3.3V|yes
+  [Teensy 4.1](https://www.pjrc.com/store/teensy41.html)|[IMXRT1062DVJ6A](https://www.mouser.com/new/nxp-semiconductors/nxp-imx-rt1060-crossover-processor/) ARM-Cortex M7|600MHz|1M|2M|3.3V|yes
+
+## Submitting Patches
+
+Proposed patches should be submitted as a Pull Request against the ([bugfix-2.0.x](https://github.com/MarlinFirmware/Marlin/tree/bugfix-2.0.x)) branch.
 
 - This branch is for fixing bugs and integrating any new features for the duration of the Marlin 2.0.x life-cycle.
 - Follow the [Coding Standards](https://marlinfw.org/docs/development/coding_standards.html) to gain points with the maintainers.
@@ -74,23 +116,19 @@ To build Marlin 2.0 you'll need [Arduino IDE 1.8.8 or newer](https://www.arduino
   - You can use `make tests-all-local` or `make tests-single-local TEST_TARGET=...`.
   - If you prefer Docker you can use `make tests-all-local-docker` or `make tests-all-local-docker TEST_TARGET=...`.
 
-- [Marlin Documentation](http://marlinfw.org) - Official Marlin documentation
-- [Marlin Discord](https://discord.gg/n5NJ59y) - Discuss issues with Marlin users and developers
-- Facebook Group ["Marlin Firmware"](https://www.facebook.com/groups/1049718498464482/)
-- RepRap.org [Marlin Forum](http://forums.reprap.org/list.php?415)
-- [Tom's 3D Forums](https://forum.toms3d.org/)
-- Facebook Group ["Marlin Firmware for 3D Printers"](https://www.facebook.com/groups/3Dtechtalk/)
-- [Marlin Configuration](https://www.youtube.com/results?search_query=marlin+configuration) on YouTube
+### [RepRap.org Wiki Page](https://reprap.org/wiki/Marlin)
 
 ## Credits
 
 The current Marlin dev team consists of:
 
- - Scott Lahteine [[@thinkyhead](https://github.com/thinkyhead)] - USA   [Donate](http://www.thinkyhead.com/donate-to-marlin)
+ - Scott Lahteine [[@thinkyhead](https://github.com/thinkyhead)] - USA   [Donate](https://www.thinkyhead.com/donate-to-marlin) / Flattr: [![Flattr Scott](https://api.flattr.com/button/flattr-badge-small.png)](https://flattr.com/submit/auto?user_id=thinkyhead&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)
  - Roxanne Neufeld [[@Roxy-3D](https://github.com/Roxy-3D)] - USA
  - Chris Pepper [[@p3p](https://github.com/p3p)] - UK
  - Bob Kuhn [[@Bob-the-Kuhn](https://github.com/Bob-the-Kuhn)] - USA
- - Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)] - Netherlands 
+ - João Brazio [[@jbrazio](https://github.com/jbrazio)] - Portugal
+ - Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)] - Netherlands   [![Flattr Erik](https://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)
+
 ## License
 
 Marlin is published under the [GPL license](/LICENSE) because we believe in open development. The GPL comes with both rights and obligations. Whether you use Marlin firmware as the driver for your open or closed-source product, you must keep Marlin open, and you must provide your compatible Marlin source code to end users upon request. The most straightforward way to comply with the Marlin license is to make a fork of Marlin on Github, perform your modifications, and direct users to your modified fork.

buildroot/tests/BIGTREE_GTR_V1_0-tests

@@ -23,8 +23,7 @@ opt_set E1_AUTO_FAN_PIN PC11
 opt_set E2_AUTO_FAN_PIN PC12
 opt_set X_DRIVER_TYPE TMC2208
 opt_set Y_DRIVER_TYPE TMC2130
-opt_set NEOPIXEL_PIN PF13
-opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER BLTOUCH NEOPIXEL_LED Z_SAFE_HOMING
+opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
 opt_enable FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE
 opt_set FIL_RUNOUT_PIN 3
 opt_set FIL_RUNOUT2_PIN 4
@@ -35,9 +34,9 @@ opt_set FIL_RUNOUT6_PIN 8
 opt_set FIL_RUNOUT7_PIN 9
 opt_set FIL_RUNOUT8_PIN 10
 opt_set FIL_RUNOUT4_STATE HIGH
-opt_enable FIL_RUNOUT4_PULLUP
+opt_enable FIL_RUNOUT4_PULL
 opt_set FIL_RUNOUT8_STATE HIGH
-opt_enable FIL_RUNOUT8_PULLUP
+opt_enable FIL_RUNOUT8_PULL
 exec_test $1 $2 "BigTreeTech GTR 8 Extruders with Auto-Fan, Mixed TMC Drivers, and Runout Sensors with distinct states" "$3"
 
 restore_configs

buildroot/tests/BIGTREE_SKR_PRO-tests

@@ -25,17 +25,8 @@ opt_set E1_AUTO_FAN_PIN PC11
 opt_set E2_AUTO_FAN_PIN PC12
 opt_set X_DRIVER_TYPE TMC2209
 opt_set Y_DRIVER_TYPE TMC2130
-opt_enable BLTOUCH EEPROM_SETTINGS AUTO_BED_LEVELING_3POINT Z_SAFE_HOMING PINS_DEBUGGING
+opt_enable BLTOUCH EEPROM_SETTINGS AUTO_BED_LEVELING_3POINT Z_SAFE_HOMING
 exec_test $1 $2 "BigTreeTech SKR Pro 3 Extruders, Auto-Fan, BLTOUCH, mixed TMC drivers" "$3"
 
-restore_configs
-opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1
-opt_set SERIAL_PORT -1
-opt_enable LASER_FEATURE REPRAP_DISCOUNT_SMART_CONTROLLER
-opt_set CUTTER_POWER_UNIT PERCENT
-opt_add SPINDLE_LASER_PWM_PIN HEATER_1_PIN
-opt_add SPINDLE_LASER_ENA_PIN HEATER_2_PIN
-exec_test $1 $2 "Laser, LCD, PERCENT power unit" "$3"
-
 # clean up
 restore_configs

buildroot/tests/FYSETC_F6_13-tests

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+#
+# Build tests for AVR ATmega FYSETC F6 1.3
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_FYSETC_F6_13
+opt_enable DGUS_LCD_UI_FYSETC
+exec_test $1 $2 "FYSETC F6 1.3 with DGUS" "$3"
+
+# clean up
+restore_configs

buildroot/tests/LPC1768-tests

@@ -11,7 +11,7 @@ set -e
 #
 #restore_configs
 #opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
-#exec_test $1 $2 "Default Configuration" "$3"
+#exec_test $1 $2 "Default Configuration"
 
 restore_configs
 opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
@@ -21,7 +21,7 @@ exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), N
 
 #restore_configs
 #use_example_configs Mks/Sbase
-#exec_test $1 $2 "MKS SBASE Example Config" "$3"
+#exec_test $1 $2 "MKS SBASE Example Config"
 
 restore_configs
 opt_set MOTHERBOARD BOARD_MKS_SBASE
@@ -39,7 +39,7 @@ opt_set TEMP_SENSOR_1 -1
 opt_set TEMP_SENSOR_BED 5
 opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
            FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY PID_EXTRUSION_SCALING SOUND_MENU_ITEM \
-           NOZZLE_AS_PROBE AUTO_BED_LEVELING_BILINEAR PREHEAT_BEFORE_LEVELING G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
+           NOZZLE_AS_PROBE AUTO_BED_LEVELING_BILINEAR G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
            BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
            PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
            Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \

buildroot/tests/LPC1769-tests

@@ -12,19 +12,34 @@ set -e
 use_example_configs Azteeg/X5GT
 exec_test $1 $2 "Azteeg X5GT Example Configuration" "$3"
 
+restore_configs
+opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD
+opt_set EXTRUDERS 2
+opt_set TEMP_SENSOR_1 -1
+opt_set TEMP_SENSOR_BED 5
+opt_enable VIKI2 SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
+           FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
+           BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
+           PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
+           Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
+           LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER
+opt_disable SD_PROCEDURE_DEPTH
+opt_set GRID_MAX_POINTS_X 16
+exec_test $1 $2 "Smoothieboard with many features" "$3"
+
 restore_configs
 opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD
 opt_set EXTRUDERS 2
 opt_set TEMP_SENSOR_1 -1
 opt_set TEMP_SENSOR_BED 5
 opt_enable TFTGLCD_PANEL_SPI SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
            FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
-           BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET LEVEL_CORNERS_USE_PROBE LEVEL_CORNERS_VERIFY_RAISED \
+           BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET \
            PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
            Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
            LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER
 opt_set GRID_MAX_POINTS_X 16
-exec_test $1 $2 "Smoothieboard with TFTGLCD_PANEL_SPI and many features" "$3"
+exec_test $1 $2 "Smoothieboard with TFTGLCD_PANEL_SPI" "$3"
 
 #restore_configs
 #opt_set MOTHERBOARD BOARD_AZTEEG_X5_MINI_WIFI
@@ -39,7 +54,7 @@ exec_test $1 $2 "Smoothieboard with TFTGLCD_PANEL_SPI and many features" "$3"
 #opt_set FAN_MIN_PWM 50
 #opt_set FAN_KICKSTART_TIME 100
 #opt_set XY_FREQUENCY_LIMIT  15
-#exec_test $1 $2 "Azteeg X5 MINI WIFI Many less common options" "$3"
+#exec_test $1 $2 "Azteeg X5 MINI WIFI Many less common options"
 
 restore_configs
 use_example_configs delta/generic
@@ -51,7 +66,7 @@ opt_enable AUTO_BED_LEVELING_BILINEAR EEPROM_SETTINGS EEPROM_CHITCHAT MECHANICAL
            TMC_USE_SW_SPI MONITOR_DRIVER_STATUS STEALTHCHOP_XY STEALTHCHOP_Z HYBRID_THRESHOLD \
            SENSORLESS_PROBING Z_SAFE_HOMING X_STALL_SENSITIVITY Y_STALL_SENSITIVITY Z_STALL_SENSITIVITY TMC_DEBUG \
            EXPERIMENTAL_I2CBUS
-opt_disable PSU_CONTROL Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
+opt_disable PSU_CONTROL
 exec_test $1 $2 "Cohesion3D Remix DELTA + ABL Bilinear + EEPROM + SENSORLESS_PROBING" "$3"
 
 # clean up