Merge pull request #3655 from pavelmachek/m_36_docs

Various documentation fixes

apps/alpinenav/README.md

@@ -2,26 +2,39 @@ Alpine Navigator
 ================
 App that performs GPS monitoring to track and display position relative to a given origin in realtime.
 
-![screenshot](./sample.png)  
+![screenshot](./sample.png)
+
+	[compass 5]
+
+        altitude
+[start 1]       [current 2]
+
+        distance
+[from start 3]    [track 4]
+
+
+[btn1 -- screen lock]
+[btn2 -- remove points]
+[btn3 -- pause]
 
 Functions
 ---------
-Note if you've not used GPS yet I suggest using one of the GPS apps to get your first fix and confirm as I've found that helps initially.  
+Note if you've not used GPS yet, I suggest using one of the GPS apps to get your first fix and confirm, as I've found that helps initially.  
 
-The GPS and magnetometer will be turned on and after a few moments, when the watch buzzes and the dot turns from red to pink, that means the GPS is fixed. all your movements now will be displayed with a line drawn back to show your position relative to the start. New waypoints will be added based on checking every 10 seconds for at least 5 meters of movement. The map will scale to your distance travelled so the route will always remain within the window, the accelerometer/pedometer is not used - this is a purely GPS and compass solution so can be used for driving/cycling etc. A log file will be recorded that tracks upto 1000 waypoints, this isn't a big file and you could remove the limit but I've kept it fairly conservative here as it's not intended as a main feature, there's already good GPS recorders for the Bangle. The following other items are displayed:
+The GPS and magnetometer will be turned on and after a few moments, when the watch buzzes and the dot turns from red to pink, that means the GPS is fixed. All your movements now will be displayed with a line drawn back to show your position relative to the start. New waypoints will be added based on checking every 10 seconds for at least 5 meters of movement. The map will scale to your distance travelled so the route will always remain within the window, the accelerometer/pedometer is not used - this is a purely GPS and compass solution so can be used for driving/cycling etc. A log file will be recorded that tracks upto 1000 waypoints, this isn't a big file and you could remove the limit, but I've kept it fairly conservative here, as it's not intended as a main feature, there's already good GPS recorders for the Bangle. The following other items are displayed:
 
 1. altitude at origin, this is displayed left of the centre.  
 2. current altitude, displayed centre right  
 3. distance from origin, bottom left (meters)  
 4. distance travelled, bottom right (meters)  
 5. compass heading, at the top
 
-For the display, the route is kept at a set resolution, so there's no risk of running into memory problems if you run this for long periods or any length of time because the waypoints will be reduced when it reaches a set threshold so you may see the path smooth out slightly at intervals.
+For the display, the route is kept at a set resolution, so there's no risk of running into memory problems if you run this for long periods or any length of time, because the waypoints will be reduced when it reaches a set threshold, so you may see the path smooth out slightly at intervals.
 
-If you get strange values or dashes for the compass, it just needs calibration so you need to move the watch around briefly for this each time, ideally 360 degrees around itself, which involves taking the watch off. If you don't want to do that you can also just wave your hand around for a few seconds like you're at a rave or Dr Strange making a Sling Ring but often just moving your wrist a bit is enough.
+If you get strange values or dashes for the compass, it just needs calibration so you need to move the watch around briefly for this each time, ideally 360 degrees around itself, which involves taking the watch off. If you don't want to do that you can also just wave your hand around for a few seconds like you're at a rave or Dr Strange making a Sling Ring, but often just moving your wrist a bit is enough.
 
 The buttons do the following:  
-BTN1: this will display an 'X' in the bottom of the screen and lock all the buttons, this is to prevent you accidentally pressing either of the below. Remember to press this again to unlock it! soft and hard reset will both still work.
+BTN1: this will display an 'X' in the bottom of the screen and lock all the buttons, this is to prevent you accidentally pressing either of the below. Remember to press this again to unlock it! Soft and hard reset will both still work.
 BTN2: this removes all waypoints aside from the origin and your current location; sometimes during smaller journeys and walks, the GPS can give sporadic differences in locations because of the error margins of GPS and this can add noise to your route.    
 BTN3: this will pause the GPS and magnetometer, useful for saving power for situations where you don't necessarily need to track parts of your route e.g. you're going indoors/shelter for some time. You'll know it's paused because the compass won't update it's reading and all the metrics will be blacked out on the screen.
 

apps/gpsnav/README.md

@@ -1,6 +1,6 @@
 ## gpsnav - navigate to waypoints
 
-The app is aimed at small boat navigation although it can also be used to mark the location of your car, bicycle etc and then get directions back to it. Please note that it would be foolish in the extreme to rely on this as your only boat navigation aid!
+The app is aimed at small boat navigation, although it can also be used to mark the location of your car, bicycle etc and then get directions back to it. Please note that it would be foolish in the extreme to rely on this as your only boat navigation aid!
 
 The app displays direction of travel (course), speed, direction to waypoint (bearing) and distance to waypoint. The screen shot below is before the app has got a GPS fix.
 
@@ -13,19 +13,19 @@ The large digits are the course and speed. The top of the display is a linear co
 
 ![](waypoint_screen.jpg)
 
-The display shows that Stone Henge is 108.75Km from the location where I made the screenshot and the direction is 255 degrees - approximately west. The display shows that I am currently moving approximately north - albeit slowly!. The position of the blue circle indicates that I need to turn left to get on course to Stone Henge. When the circle and red triangle line up you are on course and course will equal bearing.
+The display shows that Stone Henge is 108.75km from the location where I made the screenshot and the direction is 255 degrees - approximately west. The display shows that I am currently moving approximately north - albeit slowly! The position of the blue circle indicates that I need to turn left to get on course to Stone Henge. When the circle and red triangle line up you are on course and course will equal bearing.
 
 ### Marking Waypoints
 
-The app lets you mark your current location as follows. There are vacant slots in the waypoint file which can be allocated a location. In the distributed waypoint file these are labelled WP0 to WP4. Select one of these - WP2 is shown below.
+The app lets you mark your current location as follows. There are vacant slots in the waypoint file which can be allocated a location. In the distributed waypoint file, these are labelled WP0 to WP4. Select one of these - WP2 is shown below.
 
 ![](select_screen.jpg)
 
 Bearing and distance are both zero as WP1 has currently no GPS location associated with it. To mark the location, press BTN2 [touch / BTN].
 
 ![](marked_screen.jpg)
 
-The app indicates that WP2 is now marked by adding the prefix @ to it's name. The distance should be small as shown in the screen shot as you have just marked your current location.
+The app indicates that WP2 is now marked by adding the prefix @ to it's name. The distance should be small as shown in the screen shot, as you have just marked your current location.
 
 ### Waypoint JSON file
 
@@ -60,6 +60,6 @@ You add and delete entries using the Web IDE to load and then save the file from
 
 ### Waypoint Editor
 
-Clicking on the download icon of gpsnav in the app loader invokes the waypoint editor.  The editor downloads and displays the current `waypoints.json` file. Clicking the `Edit` button beside an entry causes the entry to be deleted from the list and displayed in the edit boxes. It can be restored -  by clicking the `Add waypoint` button. A new markable entry is created by using the `Add name` button. The edited `waypoints.json` file is uploaded to the Bangle by clicking the `Upload` button. 
+Clicking on the download icon of gpsnav in the app loader invokes the waypoint editor. The editor downloads and displays the current `waypoints.json` file. Clicking the `Edit` button beside an entry causes the entry to be deleted from the list and displayed in the edit boxes. It can be restored -  by clicking the `Add waypoint` button. A new markable entry is created by using the `Add name` button. The edited `waypoints.json` file is uploaded to the Bangle by clicking the `Upload` button. 
 
 *Please report bugs etc. by raising an issue [here](https://github.com/jeffmer/JeffsBangleAppsDev). *

apps/rings/README.md

@@ -4,7 +4,7 @@ Ring based watchface, read from the outside in. When the watch is unlocked the c
 Contributors: Amos Blanton, pinq-. Inspired by Rinkulainen by Julio Kallio.
 
 ![](screenshot1.png) 
-View when watch is locked. 
+View when watch is locked. From outside: Hours, minutes, battery.
 
 ![](screenshot5.png) 
 View when watch is locked with numbers and bubble settings on