Merge/foundation release/1.13.14+15 #623
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Co-authored-by: Felix Lange <[email protected]>
This change enables Cancun - Sepolia at 1706655072 (Jan 31st, 2024) - Holesky at 1707305664 (Feb 7th, 2024) Specification: ethereum/execution-specs#860
This change simplifies the logic for indexing transactions and enhances the UX when transaction is not found by returning more information to users. Transaction indexing is now considered as a part of the initial sync, and `eth.syncing` will thus be `true` if transaction indexing is not yet finished. API consumers can use the syncing status to determine if the node is ready to serve users.
go.{mod,sum}: upgrade go-ole
This change makes use of uin256 to represent balance in state. It touches primarily upon statedb, stateobject and state processing, trying to avoid changes in transaction pools, core types, rpc and tracers.
…ace (#28849) This change switches from using the `Hasher` interface to add/query the bloomfilter to implementing it as methods. This significantly reduces the allocations for Search and Rebloom.
fix misleading comment
… param checks (#28230) This PR introduces a few changes with respect to payload verification in fcu and new payload requests: * First of all, it undoes the `verifyPayloadAttributes(..)` simplification I attempted in #27872. * Adds timestamp validation to fcu payload attributes [as required](https://github.com/ethereum/execution-apis/blob/main/src/engine/cancun.md#specification-1) (section 2) by the Engine API spec. * For the new payload methods, I also update the verification of the executable data. For `newPayloadV2`, it does not currently ensure that cancun values are `nil`. Which could make it possible to submit cancun payloads through it. * On `newPayloadV3` the same types of checks are added. All shanghai and cancun related fields in the executable data must be non-nil, with the addition that the timestamp is _only_ with cancun. * Finally it updates a newly failing catalyst test to call the correct fcu and new payload methods depending on the fork.
…d reset (#28837) This PR fixes an issues in the new simulated backend. The root cause is the fact that the transaction pool has an internal reset operation that runs on a background thread. When a new transaction is added to the pool via the RPC, the transaction is added to a non-executable queue and will be moved to its final location on a background thread. If the machine is overloaded (or simply due to timing issues), it can happen that the simulated backend will try to produce the next block, whilst the pool has not yet marked the newly added transaction executable. This will cause the block to not contain the transaction. This is an issue because we want determinism from the simulator: add a tx, mine a block. It should be in there. The PR fixes it by adding a Sync function to the txpool, which waits for the current reset operation (if any) to finish, and then runs an entire round of reset on top. The new round is needed because resets are only triggered by new head events, so newly added transactions will not trigger the outer resets that we can wait on. The transaction pool would eventually internally do a reset even on transaction addition, but there's no easy way to wait on that and there's no meaningful reason to bubble that across everything. A clean outer reset will at worse be a small noop goroutine.
This change moves all the transaction indexing functions to a separate txindexer.go file and defines a txIndexer structure as a refactoring.
GetPayloadVX should only return payloads which match its version. GetPayloadV2 is a special snowflake that supports v1 and v2 payloads. This change uses a a version-specific prefix within in the payload id, basically a namespace for the version number.
Fix flaky test due to incomplete transaction indexing
Release 1.13.11
…879) This adds an error if the signer returns a nil value for one of the signature value fields.
The hyperlink in the README file that directs to the Travis CI build was broken. This commit updates the link to point to the corrent build page.
At some point, `ForkchoiceUpdatedV2` stopped working for `PayloadAttributesV1` while `paris` was active. This was causing a few failures in hive. This PR fixes that, and also adds a gate in `ForkchoiceUpdatedV1` to disallow `PayloadAttributesV3`.
This pull request resets the txlookup cache if chain reorg happens, preventing them from remaining reachable. It addresses failures in the hive tests.
* eth/downloader: fix skeleton cleanup * eth/downloader: short circuit if nothing to delete * eth/downloader: polish the logic in cleanup * eth/downloader: address comments
… (#28914) * core/txpool/blobpool: clean up resurrected junk after a crash * core/txpool/blobpool: track transaction insertions and rejections * core/txpool/blobpool: linnnnnnnt
…er (#28917) * core/txpool: don't inject lazy resolved transactions into the container * core/txpool: minor typo fixes
…ore,internal/era,miner,node,p2p/discover,p2p/discover/v5wire,p2p/dnsdisc,p2p/enode,p2p/nat,p2p/simulations/adapters,signer/core/apitypes,trie,triedb/pathdb: all: replace fmt.Errorf() with errors.New() if no param required (#29126) replace-fmt-errorf Co-authored-by: [email protected] <[email protected]>
…s in TestTCPPipeBidirections (#29207)
Co-authored-by: Stefan <[email protected]>
Co-authored-by: Felix Lange <[email protected]>
…hake and auth data size (#29708)
…oved node revalidation (#29572) Node discovery periodically revalidates the nodes in its table by sending PING, checking if they are still alive. I recently noticed some issues with the implementation of this process, which can cause strange results such as nodes dropping unexpectedly, certain nodes not getting revalidated often enough, and bad results being returned to incoming FINDNODE queries. In this change, the revalidation process is improved with the following logic: - We maintain two 'revalidation lists' containing the table nodes, named 'fast' and 'slow'. - The process chooses random nodes from each list on a randomized interval, the interval being faster for the 'fast' list, and performs revalidation for the chosen node. - Whenever a node is newly inserted into the table, it goes into the 'fast' list. Once validation passes, it transfers to the 'slow' list. If a request fails, or the node changes endpoint, it transfers back into 'fast'. - livenessChecks is incremented by one for successful checks. Unlike the old implementation, we will not drop the node on the first failing check. We instead quickly decay the livenessChecks give it another chance. - Order of nodes in bucket doesn't matter anymore. I am also adding a debug API endpoint to dump the node table content. Co-authored-by: Martin HS <[email protected]>
…9801) enode.Node has separate accessor functions for getting the IP, UDP port and TCP port. These methods performed separate checks for attributes set in the ENR. With this PR, the accessor methods will now return cached information, and the endpoint is determined when the node is created. The logic to determine the preferred endpoint is now more correct, and considers how 'global' each address is when both IPv4 and IPv6 addresses are present in the ENR.
…d (#29864) In #29572, I assumed the revalidation list that the node is contained in could only ever be changed by the outcome of a revalidation request. But turns out that's not true: if the node gets removed due to FINDNODE failure, it will also be removed from the list it is in. This causes a crash. The invariant is: while node is in table, it is always in exactly one of the two lists. So it seems best to store a pointer to the current list within the node itself.
It seems the semantic differences between addFoundNode and addInboundNode were lost in #29572. My understanding is addFoundNode is for a node you have not contacted directly (and are unsure if is available) whereas addInboundNode is for adding nodes that have contacted the local node and we can verify they are active. handleAddNode seems to be the consolidation of those two methods, yet it bumps the node in the bucket (updating it's IP addr) even if the node was not an inbound. This PR fixes this. It wasn't originally caught in tests like TestTable_addSeenNode because the manipulation of the node object actually modified the node value used by the test. New logic is added to reject non-inbound updates unless the sequence number of the (signed) ENR increases. Inbound updates, which are published by the updated node itself, are always accepted. If an inbound update changes the endpoint, the node will be revalidated on an expedited schedule. Co-authored-by: Felix Lange <[email protected]>
…emove stale information about docker adapter (#29874)
…ver,p2p: p2p/discover: refactor node and endpoint representation (#29844) Here we clean up internal uses of type discover.node, converting most code to use enode.Node instead. The discover.node type used to be the canonical representation of network hosts before ENR was introduced. Most code worked with *node to avoid conversions when interacting with Table methods. Since *node also contains internal state of Table and is a mutable type, using *node outside of Table code is prone to data races. It's also cleaner not having to wrap/unwrap *enode.Node all the time. discover.node has been renamed to tableNode to clarify its purpose. While here, we also change most uses of net.UDPAddr into netip.AddrPort. While this is technically a separate refactoring from the *node -> *enode.Node change, it is more convenient because *enode.Node handles IP addresses as netip.Addr. The switch to package netip in discovery would've happened very soon anyway. The change to netip.AddrPort stops at certain interface points. For example, since package p2p/netutil has not been converted to use netip.Addr yet, we still have to convert to net.IP/net.UDPAddr in a few places.
…ypto,crypto/ecies,crypto/secp256k1,crypto,go.sum,p2p/rlpx: all: update to go version 1.22.1 (#28946) Since Go 1.22 has deprecated certain elliptic curve operations, this PR removes references to the affected functions and replaces them with a custom implementation in package crypto. This causes backwards-incompatible changes in some places. --------- Co-authored-by: Marius van der Wijden <[email protected]> Co-authored-by: Felix Lange <[email protected]>
Co-authored-by: Felix Lange <[email protected]>
…3.15-p2p-lint Fix lint issue SA1019 reflect.SliceHeader
…3.15-p2p Add latest p2p
…,p2p/discover,p2p/discover/v5wire,p2p/enode,p2p/netutil,p2p: p2p: use netip.Addr where possible (#29891) enode.Node was recently changed to store a cache of endpoint information. The IP address in the cache is a netip.Addr. I chose that type over net.IP because it is just better. netip.Addr is meant to be used as a value type. Copying it does not allocate, it can be compared with ==, and can be used as a map key. This PR changes most uses of Node.IP() into Node.IPAddr(), which returns the cached value directly without allocating. While there are still some public APIs left where net.IP is used, I have converted all code used internally by p2p/discover to the new types. So this does change some public Go API, but hopefully not APIs any external code actually uses. There weren't supposed to be any semantic differences resulting from this refactoring, however it does introduce one: In package p2p/netutil we treated the 0.0.0.0/8 network (addresses 0.x.y.z) as LAN, but netip.Addr.IsPrivate() doesn't. The treatment of this particular IP address range is controversial, with some software supporting it and others not. IANA lists it as special-purpose and invalid as a destination for a long time, so I don't know why I put it into the LAN list. It has now been marked as special in p2p/netutil as well.
Fixes an issue where discovery responses were not recognized.
…3.15-p2p-discover-unwrap-4in6 Include latest foundation release fixes in p2p
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Supersedes #621
What's Changed
Fixed
Comparison with last release: v1.13.1..v1.12.19
Docker images published under etclabscore/core-geth.