Update fortanix-sgx-tools version due to libunwind update

Update aesm-client version due to ECDSA operations

aesm-client/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "aesm-client"
-version = "0.4.0"
+version = "0.4.1"
 authors = ["Fortanix, Inc."]
 license = "MPL-2.0"
 description = """

doc/FORTANIX-SGX-ABI.md

@@ -1,13 +1,14 @@
-# Fortanix SGX ABI v0.3.0
+# Fortanix SGX ABI v0.3.2
 
 This document describes the ABI of SGX enclaves built using `libenclave`.
 
 ## ABI version compatibility
 
 | ABI version | Rust std version | enclave-runner version |
 | -----------:| ----------------:| ----------------------:|
-|       0.3.1 |              TBD |                  0.1.0 |
-|       0.3.0 |        15a2607.. |                  0.1.0 |
+|       0.3.2 |        50f3d6e.. |            0.1.0~0.3.1 |
+|       0.3.1 |        bd47d68.. |            0.1.0~0.3.1 |
+|       0.3.0 |        15a2607.. |            0.1.0~0.3.1 |
 
 | ABI version | libenclave version | enclave-interface version |
 | -----------:| ------------------:| -------------------------:|
@@ -18,84 +19,48 @@ This document describes the ABI of SGX enclaves built using `libenclave`.
 |       0.1.3 |        0.1.0-0.1.3 |               0.1.0-0.1.1 |
 |       0.1.0 |        0.1.0-0.1.3 |               0.1.0-0.1.1 |
 
-## Changelog
+### Changelog
 
-### Version 0.3.2
+#### Version 0.3.2
 
 * *No semantic changes.*
 * More changes to allow building as a crates.io dependency of `std`.
 
-### Version 0.3.1
+#### Version 0.3.1
 
 * *No semantic changes.*
 * Changes to allow building as a crates.io dependency of `std`.
 
-### Version 0.3.0
+#### Version 0.3.0
 
 * Return values are now two registers wide instead of one.
 * No longer distinguish between “panic exit” and “usercall exit”. Panic
   signalling is now done at the API level.
 * Renamed “libenclave ABI” to “Fortanix SGX ABI”.
 * TLS size and contents updated.
 
-### Version 0.2.3
+#### Version 0.2.3
 
 * TLS size and contents updated.
 
-### Version 0.2.2
+#### Version 0.2.2
 
 * TLS size updated. Debug TLS size is now the same as non-debug size.
 
-### Version 0.2.1
+#### Version 0.2.1
 
 * AEX debug handler removed.
 
-### Version 0.2.0
+#### Version 0.2.0
 
 * Usercall register saving semantics changed. The enclave no longer
   distinguishes between normal enters and usercall enters for purposes of
   saving user register state.
 
-### Version 0.1.3
+#### Version 0.1.3
 
 * TLS size and contents updated.
 
-## Thread settings
-
-This section describes the requirements on the SGX thread control structure 
-(TCS), thread local storage (TLS) and thread stacks.
-
-### TCS
-
-- `NSSA` should be set to 1.
-- `OGSBASGX` should point to a thread-specific memory region (e.g. TLS) of at 
-  least 112 bytes.
-
-### TLS
-
-The memory region pointed to by `OGSBASGX` should be initialized as follows:
-
-- Offset `0x0`: Top-of-Stack offset from image base.
-- Offset `0x8`: `1` if this is an executable and this is a secondary TCS, `0`
-  otherwise.
-- Offsets `0x10`, `0x18`, `0x20`: `0`
-- Other offsets: uninitialized.
-
-## Globals
-
-This section describes the requirements for various global constants in the SGX
-binary.
-
-- `HEAP_BASE`. Size 8 bytes. The base address (relative to enclave start) of
-  the heap area, little-endian.
-- `HEAP_SIZE`. Size 8 bytes. The heap size in bytes, little-endian.
-- `ENCLAVE_SIZE`. Size 8 bytes. The enclave size in bytes, little-endian.
-- `CFGDATA_BASE`. Size 8 bytes. The base address (relative to enclave start) of
-  the enclave configuration area, little-endian.
-- `RELA`. Size 8 bytes. Value of the RELA entry in the dynamic table.
-- `RELACOUNT`. Size 8 bytes. Value of the RELACOUNT entry in the dynamic table.
-- `DEBUG`. Size 1 byte. Non-zero if debugging is enabled, zero otherwise.
-
 ## Enclave calling convention
 
 Upon `EENTER`, besides the standard SGX control registers, parameters are 

doc/FORTANIX-SGX-ELF.md

@@ -0,0 +1,61 @@
+# Fortanix SGX ELF specification
+
+ELF is only an intermediate stage for the Fortanix SGX toolchain. Compatibility
+is maintained at the source code and SGXS ABI level (see
+[FORTANIX-SGX-ABI.md](FORTANIX-SGX-ABI.md)).
+
+Nonetheless, this document describes the intermediate ELF format. This is for
+reference purposes only, third parties should *not* rely on this format.
+
+## ELF compatibility level
+
+The compatibility level is contained in an ELF note section named
+`.note.x86_64-fortanix-unknown-sgx`, note type `NT_VERSION` with name
+`toolchain-version`. The contents of the note is a 32-bit little-endian number.
+
+| toolchain-version | fortanix-sgx-tools version | Rust std version |
+| -----------------:| --------------------------:|-----------------:|
+|             1     |                0.4.0       |              TBD |
+|             0     |          0.1.0~0.4.0       |        33e6df4.. |
+
+### Changelog
+
+#### Version 1
+
+* Updated libunwind integration for new libunwind version
+
+## Thread settings
+
+This section describes the requirements on the SGX thread control structure 
+(TCS), thread local storage (TLS) and thread stacks.
+
+### TCS
+
+- `NSSA` should be set to 1.
+- `OGSBASGX` should point to a thread-specific memory region (e.g. TLS) of at 
+  least 112 bytes.
+
+### TLS
+
+The memory region pointed to by `OGSBASGX` should be initialized as follows:
+
+- Offset `0x0`: Top-of-Stack offset from image base.
+- Offset `0x8`: `1` if this is an executable and this is a secondary TCS, `0`
+  otherwise.
+- Offsets `0x10`, `0x18`, `0x20`: `0`
+- Other offsets: uninitialized.
+
+## Globals
+
+This section describes the requirements for various global constants in the SGX
+binary.
+
+- `HEAP_BASE`. Size 8 bytes. The base address (relative to enclave start) of
+  the heap area, little-endian.
+- `HEAP_SIZE`. Size 8 bytes. The heap size in bytes, little-endian.
+- `ENCLAVE_SIZE`. Size 8 bytes. The enclave size in bytes, little-endian.
+- `CFGDATA_BASE`. Size 8 bytes. The base address (relative to enclave start) of
+  the enclave configuration area, little-endian.
+- `RELA`. Size 8 bytes. Value of the RELA entry in the dynamic table.
+- `RELACOUNT`. Size 8 bytes. Value of the RELACOUNT entry in the dynamic table.
+- `DEBUG`. Size 1 byte. Non-zero if debugging is enabled, zero otherwise.

fortanix-sgx-tools/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "fortanix-sgx-tools"
-version = "0.3.1"
+version = "0.4.0"
 authors = ["Fortanix, Inc."]
 license = "MPL-2.0"
 description = """