You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
LOOK FOR THE LATEST RELEASE ON THE RIGHT SIDE OF THE SCREEN UNDER
LOOK FOR THE LATEST RELEASE ON THE RIGHT SIDE OF THE SCREEN UNDER RELEASES >>>>>>>
DONT USE rev 7.05 NOR enable the FAN MIN AUTO feature as it may (over much time) damange the memory chip in the amp. Waiting for word from elecraft.
Releases" >>>>>>>>>>>>>>>>>>>>>
New! read below for link to 3D case modified for WeMos + 232 board!
This project was started for use in ham shacks where the mains power to the amplifier (120v/240v) is switched OFF and ON. By design, when MAINs power is applied to the amp (by a separate remote command power switch - Alexa?") , Elecraft designed the amp so it still requires a separate power on command from the physical power button to operate. That's hard to do when you're hundreds of miles away. Alternatively the amp does accept a POWER ON command via it's serial port. The initial design goal for this project was to make a low-cost web/serial interface to allow the power to be turned on remotely.
